Attachment 6 - Item Product Descriptions.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

ITEM PRODUCT DESCRIPTIONS – CENTCOM (IPD)

Table of Contents

Section 1: Office Supplies/Packaging 204 NSNs

Section 2: Furniture/Housewares 26 NSNs

Section 3: Hardware/Maintenance Repair Operation

Supply 116 NSNs

Section 4: Janitorial/Sanitation/General Supplies

Section 5: Ability One 513 NSNs/IPDs

Section 1: Office Supplies/Packaging 204 NSNs

NSN: 5820-01-518-3622 UI: SE

RECEIVER-TRANSMITTER, RADIO

DESCRIPTION

ITEM NAME RADIO, RECEIVER-TRANSMITTER (WALKIE TALKIE), FRS/GMRS

PRODUCT WIDTH 3.25 INCHES (+/- 1.00 IN.) (UNIT)

1.25 INCHES (+/- 0.2. IN) (DISPLAY)

PRODUCT HEIGHT 7.00 INCHES (+/- 3.00 IN. (UNIT)

0.875 INCHES (+/- 0.25 IN.) (DISPLAY)

PRODUCT DEPTH 1.75 INCHES (+/- 0.75 IN.)

BASIS WEIGHT 1.00 POUNDS MAXIMUM (UNIT)

4.00 POUNDS NOMINAL (SET)

DISPLAY TYPE LCD

DISPLAY LIGHTING BACKLIT

MIC AND HEADPHONE JACKS INCLUDED

FREQUENCY 462.550 ~ 467.7125 MHz

WEATHER FREQUENCY 162.400 TO 163.275 MHz

NOAA WEATHER ALERT RADIO INCLUDED

WEATHER SCAN INCLUDED

RANGE 30 MILES OR BETTER

TRANSMIT POWER MAXIMUM ALLOWED BY LAW

CHANNEL QUANTITY 22 FRS AND GMRS (MINIMUM)

VOX LEVELS 5 MINIMUM

RoHS COMPLIANT YES

CERTIFICATION FCC CERTIFICATION PART 95

ALERTS VIBRATE ALERT

ROGER BEEP TO INDICATE CALL COMPLETION

AUDIBLE KEYSTROKE TONES

PRIVACY CODES 38 CTCSS, 104 DCS (142 MINIMUM, 3124 CHANNEL OPTIONS)

SILENT OPERATION INCLUDED

CHANNEL SCAN INCLUDED

MONITORING FEATURE INCLUDED

DIRECT CALL FEATURE INCLUDED

AUTO SQUELCH INCLUDED

KEYPAD LOCK INCLUDED

POWER SUPPLY RECHARGEABLE BATTERIES (NiMH OR LITHIUM ION)

RECHARGEABLE BATTERIES INCLUDED

NONRECHARGEABLE BATTERIES NOT INCLUDED

TRANSMIT POWER SETTINGS HIGH AND LOW

CHARGER COMPATIBILITY DROP-IN CHARGER COMPATIBLE

INCLUDED IN SET ONE (1) PAIR OF RADIOS

BELT CLIPS

AC CHARGER / DC ADAPTER

RECHARGEABLE BATTERY PACKS

PAIR OF BOOM MIC HEADSETS

ENVIRONMENTAL PROCTECTION JIS4 WATER RESISTANCE (MINIMUM)

SPECIAL MARKINGS: In addition to normal commercial markings, each packaged set shall contain a label with the following text:

FRS Frequencies use: Federal government entities are authorized to purchase and operate radios certified by the FCC in the Family Radio Service (FRS), pursuant to Part 95 Subpart B of the FCC Rules and Regulations (Title 47, Code of Federal Regulations). Government users will be accorded the same privileges as non-federal users.

Because FRS users must share each channel and no user is assured protection from interference caused by another authorized user, Federal entities may not purchase and operate FRS radios for planned communications operations that safeguard human life or property.

GMRS Frequencies use: Use of GMRS Frequencies requires an FCC license. It is the responsibility of the user to file for an appropriate FCC License. Per Title 47 CFR, Part 95 Subpart A Section 95.5, an individual is eligible to be licensed, but a non-individual (an entity other than an individual) is ineligible to obtain a GMRS license.

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For additional references, see below link: https://vsc.gsa.gov/Marking_Labeling_Packaging/

6645-01-106-4303 UI: EA

STOPWATCH

ITEM NAME STOPWATCH

MINIMUM LENGTH OF NYLON LANYARD 36.00 INCHES

MINIMUM OPERATING TEMPERATURE 14.00 DEGREES FAHRENHEIT

MAXIMUM OPERATING TEMPERATURE 122.0 DEGREES FAHRENHEIT

OVERALL HIGH TEMP RELATIVE HUMIDITY 50.00 PERCENT (+/- 20 PERCENT) ACCURACY WITHIN 0.03 PERCENT AT

25 DEGREES CELSIUS

UNIT TYPE DIGITAL STOPWATCH

DISPLAY SIZE JUMBO

DIGITAL DISPLAY TYPE HOUR, MINUTE, SECOND, TENTHS AND HUNDRETHS OF A SECOND,

MONTH, DAY, DATE AND ALARM CONTROLS TIME-OUT MODE, TWO

SEPARATE CONTROLS FOR START/STOP AND RESET

BUTTON TYPE EXTRA LARGE GRIP BUTTONS

FIT TYPE MADE TO FIT IN PALM OF HAND

POWER SOURCE BATTERY

TIME DISPLAY LIQUID CRYSTAL

CASE AND INNER WORKINGS QUALITY AND STRENGTH / DURABILITY

MADE TO LAST MINIMUM OF TWO YEARS OR NORMAL USE.

WARRANTY WARRANTED BY CONTRACTOR FOR PARTS AND LABOR FOR TWO

YEARS FROM DATE OF DELIVERY TO GOVERNMENT

SPECIAL FEATURE SPLIT MODE DISPLAY WHILE TIMING CONTINUES; RESOLUTION IS

1/100 SECOND FOR FIRST 30 MINUTES AND THEN 1 SECOND

INCREMENTS FOR UP TO 24 HOURS

ENVIRONMENTAL PROTECTION WATER, DUST, AND SHOCK RESISTANT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

NSN: 6680-00-641-3206 UI: EA

COUNTER, RECIPROCATING

ITEM NAME COUNTER, RECIPROCATING

COUNTER DIGIT HEIGHT 0.157 INCHES

FINGER RING DIAMETER 0.984 INCHES (+/- 0.196 INCHES)

FIGURE OVERALL HEIGHT 0.157 INCHES SINGLE REGISTER SINGLE TIER

COUNTING RANGE 0000 TO 9999

REGISTER QUANTITY 1

REGISTER RESET METHOD TOTAL COUNTER MANUAL SINGLE REGISTER SINGLE TIER

REGISTER FUNCTION ADD SINGLE REGISTER SINGLE TIER

FURNISHED ITEMS FINGER RING

ACTUATING DEVICE LOCATION TOP CENTER SINGLE REGISTER SINGLE TIER DESIGNED FOR RIGHT OR

LEFT THUMB

MATERIAL METAL, PLASTIC OR COMBINED METAL AND PLASTIC

COUNTER TYPE HANDHELD

USAGE DESIGN FOR COUNTING PEOPLE, VEHICLES, TREES, PACKAGES AND ANY OTHER

VISIBLE OBJECTS

INCLUDES ZERO RESET KNOB / BUTTON RESETS ALL DIGITS TO 0000

ACTUATING DEVICE ADVANCES CONSECUTIVE COUNT BY ONE WHEN DEPRESSED

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

7025-01-490-6701 UI: EA

MOUSE, DATA ENTRY

ITEM NAME MOUSE, DATA ENTRY

I.A.W. MICROSOFT P/N 4FD-00025 OR COMMERCIAL EQUAL

OVERALL WIDTH 2.600 INCHES (+/- 0.400 INCHES)

OVERALL LENGTH 4.500 INCHES (+/- 0.500 INCHES)

OVERALL HEIGHT 1.600 INCHES (+/- 0.700 INCHES)

MINIMUM CABLE LENGTH 60.00 INCHES

UNIT SHAPE ERGONOMIC SYMMETRICAL SHAPE

UNIT DESIGN AMBIDEXTROUS OPTICAL MOUSE

USAGE APPLICATION FOR WINDOWS XP AND NEWER OPERATING SYSTEMS; COMPATIBLE

WITH MAC OSX v10.4x-10.6x

OVERALL COLOR BLACK / GRAY / SILVER / TAN / OFF-WHITE

INTERFACE TYPE USB WIRED

INTERFACE DESIGN 5 BUTTONS WITH INTEGRAL TILT SCROLL WHEEL

PROGRAMMABILITY MOUSE BUTTONS ARE USER CUSTOMIZABLE

LIGHT TYPE LED OR EQUAL

TRACKING SPEED UP TO 60 INCHES PER SECOND MINIMUM

TRACKING RESOLUTION 900 POINTS PER INCH MINIMUM

SPECIAL FEATURE A POINTING DEVICE DESIGNED TO GENERATE A SIGNAL TO MOVE A

CURSOR AND / OR TRACKING SYMBOL ON A DISPLAY DEVICE FOR

INPUTTING DATA INTO AN ELECTRONIC SYSTEM AND / OR TO

CONTROL THE OPERATION OF A SYSTEM WITH AN OPTICAL SENSOR

FOR PRECISE CONTROL ON ANY SURFACE. RUBBERIZED SIDES; NO

MOUSE PAD NEEDED

BIDDING ON:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT

WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7045-01-412-5317 UI: EA

PAD, MOUSE

ITEM NAME PAD, MOUSE

OVERALL WIDTH 8.000 INCHES TO 10.00 INCHES

OVERALL LENGTH 9.500 INCHES TO 12.00 INCHES

WRIST PAD THICKNESS 1.000 INCHES (+ 0.500 INCH / - 0.30 INCH)

MOUSE PAD THICKNESS 0.250 INCHES (+ 0.125 INCH / - 0.068 INCH)

USAGE DESIGN ERGONOMIC PAD FOR USE WITH ANY COMPUTER MOUSE

OVERALL COLOR BLACK OR SLATE

OVERALL MATERIAL FABRIC COVER WITH A GEL OR RESILIENT FOAM INTERIOR (WRIST

REST AREA)

PAD SIZE UNIVERSAL SIZE TO FIT ALL HAND AND MOUSE SIZES

BASE TYPE NON-SKID

SPECIAL FEATURE COMBINATION WRIST REST AND MOUSE PAD

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

7045-01-441-9576 UI: EA

ADPE, WRIST REST

ITEM NAME ADPE, WRIST REST

OVERALL WIDTH 3.500 INCHES (+/- 0.800 INCHES)

OVERALL LENGTH 19.00 INCHES (+/- 2.000 INCHES)

OVERALL HEIGHT 1.000 INCHES (+/- 0.300 INCHES)

OVERALL COLOR BLACK

OVERALL COVER MATERIAL LYCRA

OVERALL CUSHION MATERIAL GEL-FILLED

BASE TYPE NON-SKID

SPECIAL FEATURE SOFT CUSHIONING GEL CONFORMS TO YOUR WRIST FOR ERGONOMIC

SUPPORT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL DURING THE USEFUL LIFE OF THE

ITEM.

7045-01-441-9577 UI: EA

ADPE, WRIST REST

ITEM NAME ADPE, WRIST REST

OVERALL WIDTH 9.000 INCHES (+/- 1.000 INCHES)

OVERALL LENGTH 9.500 INCHES (+ 1.500 INCHES / - 1.000 INCHES)

BASIS WEIGHT 1.000 POUND

GEL THICKNESS 0.750 TO 1.500 INCHES HIGH AT WRIST REST AREA OF THE MOUSE

PAD

GEL AREA DIMENSION 1.000 TO 2.000 INCHES LONG BY THE ENTIRE FULL WIDTH OF THE

MOUSE PAD AND LOCATED AT THE BASE OF THE MOUSE PAD

OVERALL COLOR BLACK

OVERALL CUSHION MATERIAL GEL-FILLED

BASE TYPE NON-SKID

SPECIAL FEATURE WRIST REST AND MOUSE PAD COMBO WITH GEL-FILLED CHAMBER

THAT CONFORMS TO THE WRIST SHAPE FOR MAXIMUM COMFORT

AND FOR THE TRACKING SURFACE FOR THE MOUSE; STAIN RESISTANT

ENVIRONMENTAL PROTECTION WATER RESISTANT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL

NSN: 7045-01-444-2534 UI: EA

ADPE, MOUSE WRIST SUPPORT

ITEM NAME ADPE, MOUSE WRIST SUPPORT

OVERALL WIDTH 7.50 INCHES (+/- 1.50 INCHES)

OVERALL LENGTH 10.0 INCHES (+/- 1.00 INCHES)

OVERALL HEIGHT 1.25 INCHES (+ 0.75 INCH - 0.50 INCH) IN WRIST REST AREA

GEL THICKNESS 1.00 INCHES TO 2.00 INCHES (IN WRIST REST AREA)

BASIS WEIGHT 1.00 POUND (NOMINAL)

UNIT TYPE MOUSE PAD WITH GEL WRIST REST

USAGE DESIGN ERGONOMICALLY DESIGNED TO REDISTRIBUTE PRESSURE POINTS TO

OFFER COMFORT TO YOUR WRIST

OVERALL COLOR GRAPHITE / PLATINUM, SILVER OR GRAY

WRIST PAD MATERIAL GEL-FILLED

BACKING MATERIAL NON-SKID RUBBER

STAIN RESISTANT ABILITY OPTIONAL

SPECIAL FEATURE PROVIDES A GOOD TRACKING SURFACE FOR THE MOUSE

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

7045-01-477-7792 UI: EA

PAD, MOUSE

ITEM NAME PAD, MOUSE

OVERALL WIDTH 10.00 INCHES (+/- 1.00 INCH)

OVERALL LENGTH 12.00 INCHES (+/- 1.00 INCH)

OVERALL HEIGHT 1.50 INCHES (+/- 0.25 INCH)

BASIS WEIGHT 1.20 LBS

OVERALL COLOR BLACK

COVER MATERIAL LYCRA

CUSHIONING MATERIAL GEL FILLED

SPECIAL FEATURES PATENTED MECHANISM ALLOWS THE GEL WRIST REST TO GLIDE

FREELY AT THE BASE OF THE MOUSE PAD. PROVIDES AN OPTICAL

FRIENDLY MOUSE TRACKING SURFACE; DURABLE AND ERGONOMIC

ENVIRONMENTAL PROTECTION STAIN RESISTANT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offeror/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL

7105-00-782-3166 UI: EA

STOOL, STEP

ITEM NAME STOOL, STEP

I.A.W. A-A-3014

TYPE IV - STEP STOOL, CASTER MOUNTED - FIGURE 5

OVERALL HEIGHT 13.00 INCHES

OVERALL DIAMETER 16.00 INCHES

MAXIMUM WEIGHT CAPACITY 350.0 POUNDS

OVERALL COLOR BLACK I.A.W. FED-STD-595

OVERALL MATERIAL PLASTIC OR STEEL FRAME

SURFACE TREATMENT ENAMEL FRAME

BASE TYPE FLAT

DUTY TYPE HEAVY DUTY

BASE END TYPE SWIVEL CASTERS

SPECIAL FEATURES STEP STOOL GLIDES EASILY ON RETRACTABLE CASTERS

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offeror/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from

NSN: 7290-00-893-7339 UI: EA

HANDCART, MAIL

DESCRIPTION

ITEM NAME HANDCART,MAIL

BASE OVERALL LENGTH 36.000 INCHES NOMINAL

NESTING FEATURE NOT INCLUDED

BASKET QUANTITY 2

BASKET REMOVABILITY REMOVABLE

BASE OVERALL WIDTH AT

BACK

17.500 INCHES NOMINAL

BASE OVERALL WIDTH AT

FRONT

17.500 INCHES NOMINAL

NONSWIVEL WHEEL

QUANTITY

SWIVEL WHEEL QUANTITY 2

BUILT-IN AUXILIARY BASKET NOT INCLUDED

BABY SEAT NOT PROVIDED

HINGED BASKET NOT INCLUDED

SPECIAL FEATURES

DISTRIBUTOR IDENTIFIED BY CAGE/PN: 586S3/LS-4 AS RNCC/VC: 3/2 IS

THE OEM

PER PAUL MUNIE 260-710-0063

All dimensional characteristics of the brand name item and item offered as equivalent specifically addressing the compatibility must be provided to establish equivalency.

Industrial Bakery Equipment (CAGE Code 586S3) Part Number LS-4 or equal.

NSN: 7490-01-459-8264 UI: BT

OIL, SHREDDING MACHINE

ITEM NAME OIL, SHREDDING MACHINE

OVERALL CAPACITY 12.00 OUNCES

USAGE APPLICATION LUBRICANT FOR USE ESPECIALLY IN CROSS-CUT SHREDDERS

OVERALL COLOR CLEAR

OVERALL MATERIAL OIL

MATERIAL TRANSPARENCY CLEAR

CONTAINER TYPE SQUEEZE BOTTLE WITH EXTENSION NOZZLE OR NARROW

APPLICATION TIP

BOTTLE TYPE UNBREAKABLE, LEAK RESISTANT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

7490-01-477-7789 UI: EA

MACHINE, LAMINATOR

ITEM NAME MACHINE, LAMINATOR

OVERALL WIDTH 11.50 INCHES (+ 6.00 INCHES / - 4.00 INCHES)

OVERALL HEIGHT 3.250 INCHES (+ 2.00 INCHES / - 0.75 INCHES)

OVERALL DEPTH 5.500 INCHES (+ 3.00 INCHES / - 2.00 INCHES)

DOCUMENT ENTRY WIDTH & THICKNESS 4.40 IN MINIMUM WIDE AND UP TO 0.025 IN TOTAL THICKNESS

ACCOMMODATES POUCHES 3 TO 5 MILS THICK (0.003 IN TO 0.005 IN) (MIN RANGE)

MAXIMUM WEIGHT 12.0 LBS

TEMPERATURE SETTINGS 1 MINIMUM

HEAT UP TIME 10 MINS MAX

POWER 120 VOLTS AC, 60 Hz

ROLLER TYPE AND QUANTITY 2 HEATED ROLLERS (MIN)

APPLICATION LAMINATES DOCUMENTS, LUGGAGE TAGS AND BUSINESS CARDS

INCLUDES STARTER KIT WITH LAMINATING POUCHES

UNIT READY INDICATOR BEEPS

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from

7490-01-477-7790 UI: EA

MACHINE, LAMINATOR

ITEM NAME MACHINE, LAMINATOR

OVERALL WIDTH 17.75 INCHES

OVERALL HEIGHT 4.25 INCHES

OVERALL DEPTH 5.75 INCHES

ENTRY WIDTH 9.50 INCHES

MAXIMUM POUCH THICKNESS 3 MILS

TEMPERATURE SETTINGS 3

LAMINATING SPEED 12.00 INCHES PER MINUTE

OVERALL MATERIAL PLASTIC / METAL

LEVER TYPE JAM PREVENTION RELEASE LEVER DISENGAGES POUCH FOR RE-

CENTERING OR REMOVAL

LAMINATE STYLE FOR HOT POUCHES OR ANY SELF-ADHESIVE COLD POUCH FOR HEAT-

SENSITIVE MATERIALS

DOCUMENT COMPATIBILITY 5 MIL COMPATIBLE FOR DOCUMENTS INDEX CARD SIZE OR SMALLER

APPLICATION FOR IDs, PHOTOS

SPECIAL FEATURE HEAT GUARD TECHNOLOGY KEEPS HEAT INSIDE

INCLUDES LAMINATOR STARTER KIT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from

7490-01-481-0403 UI: BX

OIL, SHREDDER

ITEM NAME OIL, SHREDDER

WEIGHT / VOLUME 16 - 17 OZ. PER BOTTLE

BOTTLE TYPE SQUEEZE WITH EXTENSION NOZZLE OR TIP

OIL TYPE SPECIAL FORMULA TO ENSURE MAXIMUM CROSS CUT SHREDDER

PERFORMANCE

VISCOSITY HIGH VISCOSITY

USAGE DESIGN FOR USE IN MANUALLY OILING SHREDDER CUTTING HEADS

OILING FREQUENCY CROSS CUT SHREDDERS SHOULD BE OILED EVERY HALF HOUR OF USE;

STRIP CUT SHREDDERS OILED EVERY ONE HOUR OF USE TO EXTEND

THE LIFE OF THE MACHINES

UNIT QUANTITY FORM BOTTLE

UNIT PACKAGE QUANTITY 8 BOTTLES PER BOX

PACKAGING/PACKING: Eight (8) bottles of shredding oil shall be packaged in a box in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from

NSN: 7490-01-490-7262 UI: EA

LABELING MACHINE

ITEM NAME LABELING MACHINE

MODEL TYPE DESKTOP / DUAL OPERATION

TAPE FAMILY BROTHER TZe

TAPE SIZES 3.50 MM, 6.00 MM, 9.00 MM, 12.00 MM, 18.00 MM, 24.00 MM

(0.1406 IN to 0.9375 IN)

OVERAL TAPE LENGTH 26.20 FEET

TAPE TECHNOLOGY THERMAL TRANSFER

TAPE TYPE STANDARD LAMINATED, FLEXILE ID, EXTRA TRENGTH ADHESIVE, NON-

LAMINATED IRON- ON FABRIC, ACID FREE

LCD DISPLAY 20 CHARACTER x 3 LINE COLOR GRAPHICAL DISPLAY WITH BACKLIGHT

MAXIMUM PRINT RESOLUTION 180 DPI

MAXIMUM PRINT SPEED 30 MM / SECOND

KEYBOARD QWERTY

CUTTER AUTO

BATTERIES 6 AA ALKALINE (OPTIONAL)

ENERGY STAR QUALIFIED YES

AC ADAPTER INCLUDED

INTERFACE USB (VERSION 2.0 FULL SPEED)

SOFTWARE FEATURE INCLUDES:

FONT SIZE QUANTITY 8 (AUTO, 6, 9, 12, 18, 24, 36, 42 AND 48 PT.)

FONT HELSINKI, BRUSSELS, US, FLORIDA, BELGIUM, SAN DIEGO, LOS

ANGELES, CALGARY AND 6 MORE

FONT STYLE NORMAL, BOLD, OUTLINE, SHADOW, SOLID, ITALIC, ITALIC BOLD,

ITALIC OUTLINE, ITALIC SHADOW, ITALIC SOLID, PLUS VERTICAL

FONT STYLE QUANTITY 11

BUILT-IN SYMBOL QUANTITY 253

MAXIMUM PRINT HEIGHT 18.00 MM

MAXIMUM PRINT LINE 7

MULTI-BLOCK INCLUDED

MAXIMUM MULTI-BLOCK QUANTITY 5 BLOCKS

LABEL LENGTH SETTING AUTO; 30.00 MM MINIMUM TO 300.0 MM MAXIMUM

AUTO INCREMENTATION ALPHA / NUMERIC

HORIZONTAL ALIGNMENT LEFT, CENTER, RIGHT, JUSTIFIED

VERTICAL PRINTING INCLUDED

MIRROR PRINTING INCLUDED

TEXT FRAMING / FILL PATTERN 17 FRAMES / 3 FILL PATTERNS

MAXIMUM MULTI-COPY PRINT QUANTITY 99 COPIES

OVERALL MEMORY 2,800 CHARACTERS (99 AREAS)

DATE/TIME STAMP INCLUDED

BUILT-IN DESIGNS/TEMPLATES INCLUDED

DESIGN/TEMPLATE QUANTITY 55 LABEL COLLECTION DESIGNS

AUTO FORMATS 27 (INCLUDING BLOCK LAYOUTS)

BARCODING INCLUDED

BARCODES (STAND ALONE) CODE39, CODE128, EAN-8, EAN-13, GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF), CODABAR

BARCODES (CONNECTED TO COMPUTER) CODE39, UPC-A, UPC-E, ITF (1-2/5), EAN-8, EAN-13, GS1-128

(UCC/EAN-128), CODE128, CODABAR, POSTNET, GS1 DATABAR (RSS),

QR CODE, PDF417, DATA MATRIX, LASER BAR CODE, ISBN-2 (EAN13

ADDON2), ISBN-5 (EAN13 ADDON5)

OPERATING SYSTEM WINDOWS VISTA, WINDOWS 7, WINDOWS 8/8.1;MAC OS X 10.7.5 -

10.8.x, 10.9.x, 10.10.x

CARTON CONTENT INCLUDES: 0.940 INCH (24 MM) x 13.10 FOOT BLACK ON

WHITE LAMINATED "TZe" STARTER TAPE

AC ADAPTER

CARRY CASE

USB CABLE

USER'S MANUAL

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification and shall not be more than 51 pounds in weight.

7490-01-664-9499 UI: EA

SHREDDING MACHINE, PAPER

ITEM NAME SHREDDING MACHINE, PAPER

OVERALL WIDTH 20.00 INCHES (+/- 10%)

OVERALL HEIGHT 34.00 INCHES (+/- 10%)

OVERALL DEPTH 20.00 INCHES (+/- 10%)

THROAT OPENING 11.75 INCHES (+1.25 INCHES / -0.25 INCHES)

MAXIMUM WEIGHT 215.0 POUNDS

BIN CAPACITY 30.00 GALLONS (MINIMUM)

POWER REQUIREMENT 115V/60Hz OR 220V/50Hz (SPECIAL ORDER)

SECURITY TYPE HIGH SECURITY

SECURITY LEVEL P-7 (DIN 66399) FOR MAXIMUM SECURITY I.A.W. NSA/CSS

SPECIFICATION 02-01

UNIT DESIGN SPECIAL DESIGN CUTTING HEAD WITH NO OIL USAGE REQUIRED

AVERAGE SHRED SIZE 0.0394 INCHES X 0.157 INCHES

SHEET CAPACITY UP TO 18 SHEETS

POWER RATING 1.5 HP

ONE HOUR NSA DURABILITY TEST 18 REAMS FEEDING 6 SHEETS (OR BETTER)

DESTRUCTION CAPABILITY PAPER

CUTTING ROLLER MATERIAL HARDENED STEEL

AUTO STOP / START YES

START KIT BASIC

SAFETY PROTECTION SYSTEM YES

ENERGY SAVING MODE YES

EASY SWITCH TYPE LCD DISPLAY

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade .

Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from

7510-00-132-5109 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

IN ACCORDANCE WITH A-A-59341, DATED SEPTEMBER 29, 1998. THIS DESCRIPTION COVERS THE GENERAL REQUIREMENTS FOR A DOUBLE COATED FLEXIBLE FOAM PRESSURE SENSITIVE ADHESIVE TAPE IN ROLL FORM

WOUND ON A 3 INCH CORE WITH A RELEASE LINER.

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

OVERALL WIDTH 0.750 INCHES

OVERALL LENGTH 72.00 YARDS

OVERALL CORE DIAMETER 3.000 INCHES

OVERALL THICKNESS 0.031 INCHES

UNIT TYPE FOAM TAPE

UNIT DESIGN DOUBLE-SIDED

USAGE DESIGN FOR THERMAL INSULATION, GASKETING, SEALING, JOINING,

REDUCING SHOCK AND VIBRATION

USAGE FORM ROLL

OVERALL COLOR BLACK

OVERALL MATERIAL RUBBER SYNTHETIC; NEOPRENE

MATERIAL TRANSPARENCY OPAQUE

DUTY RATING LIGHT

SURFACE LUSTER LUSTERLESS

ADHESIVE TYPE ACRYLIC

ADHESIVE LOCATION BOTH SIDES

LINER PROVIDED

LINER COLOR TAN

LINER MATERIAL PAPER

ENVIRONMENTAL PROTECTION HIGH TEMPERATURE RESISTANT

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive

Type II: Extendable

Age on Delivery: 4 Months

Shelf Life Code: 6 (24 Months Extendable Shelf Life)

Tapes shall be delivered within four (4) months after the manufacture date, and have a shelf life of twenty-four

(24) months after the manufacture date. After twenty-four (24) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

For civilian destinations - In accordance with FED-STD-123G, dated June 6, 1997. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 3, dated October 29, 2004. Bar code marking shall be included for both civilian and military destinations. In addition, the shipping containers shall be marked with the date of manufacture and the date of reinspection (12 months after the date of manufacture).

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards.