Attachment_6_Engineering_Data_Requirments_NSN_1246.pdf
PDF 99 KB Posted
- Attached to
- F-16 Fuel cell (Amendment 0004) Federal contract opportunity
- Solicitation number
- FA821224R0003
About this file
This document is an Engineering Data Requirements attachment that provides detailed technical specifications and requirements for the manufacture of a Fuel Tank - Fuselage Two PL Aircraft, Forward, REM (Part Number: 16VB004002-7, National Stock Number: 1560-01-054-1246WF).
The key details include the required specifications and standards, approved source/material information, and specific IUID (Item Unique Identifier) marking requirements the contractor must comply with. The IUID requirements outline the human-readable and 2D matrix barcode data elements, size, location, and permanence of the marking. This attachment supports a federal contract opportunity for the procurement of F-16 fuel cells (NSN: 1560-01-224-0803WF, 1560-01-322-9987WF, and 1560-01-054-1246WF) issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. The solicitation is restricted to pre-qualified sources, and a source qualification request package is required from all other interested contractors.
View the file
Other files for this federal contract opportunity
Show all 31
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FUEL TANK - FUSELAGE TWO PL AIRCRAFT, FORWARD, REM
2. PART NUMBER:
16VB004002-7
3. NATIONAL STOCK NUMBER:
1560-01-054-1246WF
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
7. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
PREPARED BY:
George Slaughter
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
2/08/2024
HILL AFB FORM 462 Page 1 of 1
File details come from the government source that posted it. Updated .