Attachment 5 W912D024Q0004 Airfield Snowplow and SnowBroom with AirBlast.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

W912D024Q0004 13-Sep-2024 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

SEE SCHEDULE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

REGIONAL CONTRACTING OFFICE - ALASKA

1064 APPLE STREET

FORT WAINWRIGHT AK 99703

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

23-Sep-2024(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

907.353.2379RICHARD F SMITH

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

W912D024Q0004

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each 45K Reversible Snowplow

FFP

45K Reversible Snow Plow w/underbody scraper. The plow shall consist of a prime mover with a dedicated snow blade capable of moving large volumes of snow across the airport/airfield paved areas in accordance with Advisory Circular (AC) 150/5220-20. Because of our location it needs the Cold Weather Package – Single point connect port, Capable to operate at temperatures down to -50o F, Key activated ether-starting aid, Heated battery box, Engine block heater. See Attachment 1 for further description.

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Each SnowBroom Dedicated/vehicle w/Air Blast

FFP

Multi-purpose w/snow blower attachment, this specification covers the minimum configuration requirements for a SNOW BROOM (DEDICATED) also referred to as a HIGH SPEED AIRFIELD SNOW BROOM for airport/airfield snow control operations. The unit shall consist of a prime mover with a dedicated snow broom capable of moving light amounts of snow across the airport/airfield paved areas in accordance with Advisory Circular (AC) 150/5220-20. Snow broom capable of moving snow density of 5 to10 pounds per cubic foot at least 25 feet across the standing surface. The prime mover unit and broom system capable of continuous operation with the necessary refueling during an entire snow event without maintenance. For the purpose of this performance requirement a snow event is considered to be at least 72 hours in duration. See Attachment 3 for Description FOB: Destination

NET AMT

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government 0002 N/A N/A N/A Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 N/A N/A N/A N/A

0002 N/A N/A N/A N/A

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020 52.203-3 Gratuities APR 1984 52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

NOV 2021

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities

DEC 2023

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

NOV 2023

52.216-18 Ordering AUG 2020 52.216-19 Order Limitations OCT 1995 52.216-21 Requirements OCT 1995 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.239-1 Privacy or Security Safeguards AUG 1996 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7003 Agency Office of the Inspector General AUG 2019 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

MAY 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023 252.204-7022 Expediting Contract Closeout MAY 2021 252.205-7000 Provision Of Information To Cooperative Agreement Holders JUN 2023 252.211-7003 Item Unique Identification and Valuation JAN 2023 252.225-7001 Buy American and Balance of Payments Program FEB 2024 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings JAN 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations

OCT 2010

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

XX (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

XX (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community--see FAR 3.900(a).

XX (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub.

L. 109-282) (31 U.S.C. 6101 note).

___ (6) [Reserved]

___ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

___ (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

___ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders--Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (DEC 2023) (Pub. L. 115-390, title II).

___ (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L.

115-390, title II).

___ (ii) Alternate I (DEC 2023) of 52.204-30.

___ (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

XX (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (14) [Reserved]

____ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

____ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (17) [Reserved]

____ (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

____ (21)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2023) of 52.219-9.

____ (22) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

____ (26) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (30) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

XX (31) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

XX (32) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2024) (E.O. 13126).

XX (33) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XX (34)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

____ (35)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

XX (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (37) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

XX (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

XX (39)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (40) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (41)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (44) 52.223-20, Aerosols (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (45) 52.223-21, Foams (MAY 2024) (42 U.S.C. 7671, et seq.).

XX (46) 52.223-23, Sustainable Products and Services (MAY 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C.

6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

____ (47) (i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

XX (48) (i) 52.225-1, Buy American--Supplies (OCT 2022)) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I [Reserved].

____ (iii) Alternate II (DEC 2022) of 52.225-3.

____ (iv) Alternate III (FEB 2024) of 52.225-3.

____ (v) Alternate IV (OCT 2022) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150).

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

XX (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (MAY 2024) (E.O.

13513).

____ (56) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C.4505, 10 U.S.C. 3805).

____ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

XX (59) 52.232-33, Payment by Electronic Funds Transfer--System for Award Management (OCT 2018) (31 U.S.C. 3332).

____ (60) 52.232-34, Payment by Electronic Funds Transfer--Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

____ (61) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (62) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (63) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (64) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

_____ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O.

13658).

_____ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L.

117-328).

(vii)(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L. 115- 390, title II).

(B) Alternate I (DEC 2023) of 52.204-30.

(viii) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(x) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

(xi) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (AUG 2018), (41 U.S.C. chapter 67).

(xvi) XX (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67.)

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67)

(xix) 52.222-54, Employment Eligibility Verification (MAY 2022) (E. O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O. 13658).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xxii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquaisition.gov

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulations Supplement (48 CFR 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Combo

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0490

Issue By DoDAAC W912D0

Admin DoDAAC** W912D0

Inspect By DoDAAC WC1JUJ

Ship To Code WC1JUJ

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

WAWF POC: Vincent Hoffman (907) 361-6056 vicent.d.hoffman.civ@army.mil

Alternate WAWF POC Martin Flora (907) 361-1277 martin.j.flora.civ@army.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

Section J - List of Documents, Exhibits and Other Attachments

LIST OF ATTACHMENTS

1. Attachment 0001 – 2024 Snow Plow Spec.

2. Attachment 0002 – Airfield Plow Picture

3. Attachment 0003 – Airfield Snow Broom w/Blower Spec.

4. Attachment 0004 – Airfield Broom Picture

5. Attachment 0005 - Solicitation

ATTACH. 1 2024 SNOW PLOW SPEC

Snow Plow, Dedicated 45K Reversible Snow Plow w/underbody scraper Basic specifications and construction (Standard Equipment) The vehicle and all furnished accessories shall comply with all Federal Motor Vehicle Safety Standards (FMVSS) in effect at the time of manufacture.

This specification covers the minimum configuration requirements for a SNOW PLOW (DEDICATED) also referred to as a 45K RVSBLE SNOW PLOW for airport/airfield snow control operations. The unit shall consist of a prime mover with a dedicated snow blade capable of moving large volumes of snow across the airport/airfield paved areas in accordance with Advisory Circular (AC) 150/5220-20.

NOTE: Pictures are visual reference only and not meant to request specific brand

MINIMUM PERFORMANCE REQUIREMENTS

Vehicle having the ability to move airfield contaminants at rated speeds of equal to or greater than 35 MPH (depending on conditions).

· Positive tire-to-ground traction effort while operating and performing full wall-to-wall turning diameter of 100 feet or less with blade unit attachment unless otherwise specified. Equipped with “All-Wheel” drive axles with differential lock.

· Snowplow Vehicle must have an underbody scraper

· Snow blade capable of lifting and moving snow density of 15 to 40 pounds per cubic foot at least 25 feet across the standing surface.

o Estimated snow density (weight): ? lbs/ft3

- Dry snow density: ≤ 10 lbs/ft3

- Medium snow density: > 10 to < 20 lbs/ft3

- Wet snow density: > 20 lbs ft3

· The prime mover unit and blade system capable of continuous operation with the necessary refueling during an entire snow event without maintenance. For the purpose of this performance requirement a snow event is considered to be at least 72 hours in duration.

OPERATOR’S ENVIRONMENT

Operator Environment: (two-person cab), acoustically insulated to less than 85 dB as measured 6 inches from the driver’s ear at full engine load. Cab attached to frame with vibration isolating mounts. Cab floor insulated with thermal-acoustical sound barrier floor matting.

· Interior equipped with:

o Standard cab interior as determined/designed by manufacturer.

§ Rollover Protection System (ROPS) / Falling Object Protection System (FOPS) structures meeting Society Automotive Engineers (SAE) and International Standards Organization (ISO) requirements.

o Adjustable, telescoping, tilt steering column.

o Steering: straight, articulated (circle), crab modes § Secondary steering system if available o Front and side interior sun visors, (opaque and/or tinted).

o NFPA approved fire extinguisher, 2A-10BC interior mounted fire extinguisher (1).

o Electrically heated windshield (Department of Transportation [DOT] approved Auto Safety (AS)-1 windshield glass).

o Auxiliary 12-volt power outlets (x 2).

o Cup holders (x 2).

o Coat hooks (x 2).

o Communication radio ready connections.

· Seats of premium quality, 6-way adjustable air ride, fully adjustable in the horizontal (fore and aft), and vertical positions with high or medium raised back, foldable arm rests, adjustable lumbar support, cloth covered, and load adjustable. Seats equipped with three-point safety belts, certified by the vehicle manufacturer to have been tested and in conformance with FMVSS requirements. Adjustments provide for ease of operation for individuals between the 5th and 95th percentile individuals. Ample visibility to both sides of the vehicle. Operator’s armrests configured in such a manner to allow the operator to sufficiently manipulate the vehicle controls without placing stress or strain on the operator.

o Power window side windows (AS-2 or AS-3 glass).

NOTE: AS-1 indicates Front windshields on a motorized vehicle with a light transmittance tint of nothing below 75%. AS-2 indicates Side windows on a motorized vehicle with a light transmittance tint of nothing below 70%. AS-3 indicates Side windows on a motorized vehicle with a light transmittance tint below 70%.

o Windshield washing and wiping (In Accordance With [IAW] FMVSS 104).

o Heated windshield, wipers, washer fluid side window wiper/washer system.

o Windshield deluge system (minimum shall consist of 5 GPM pump, 15-gallon reservoir, nozzles above front windshield (2), nozzle above each side window (1).

Fill point conveniently located for easy access. Shall not be considered as part of the regular wet wiper discharge function.

o Rear window shall be tented to prevent reflection from following snow control vehicle(s).

· Heat, Defrost and Air-Conditioned Air.

o Integral high-output, fresh air type heater/defroster/air conditioner with multi-speed fan motors.

o Front and side window defrost vents.

o Cab heater with defrost capable of maintaining 65o F.

o Cab cool air capable of maintaining 68o F.

NOTE: Aftermarket roof mounted heat/cool systems not acceptable.

· Electrical accessory controls for lights, signals, heating/ventilation, air conditioning (HVAC), ignition switch(s) ergonomically located for operator’s convenience and located in areas directly related to their frequency of use. Control switches identified/labeled and lighted preferably in a bold font for easy identification. For safety purposes, snow control attachment and transmission controls should located to the right hand side of the operator, this is recommended so the operator can perform the typical snow control operations while maintaining the left hand on the steering wheel at all times.

· Instrumentation centered in front of the operator and positioned to minimize interruption of operator visibility. In general, and to provide clear information, chassis engine system information grouped together with blower operation information noticeably and meaningfully grouped and displayed to the front of the operator.

o Instrument, Gauges (Operator interface) – recommend Society of Automotive Engineers (SAE) J1939 vehicle bus used for communication and diagnostics.

o Manufacturer should integrate Liquid Cristal Display (LCD) and/or Graphic User Interface (GUI) panels. As a minimum system monitors but not limited to:

- Speedometer/Odometer

- Tachometer

- Clock (may be integrated into radio)

- Engine Hour meter(s)

- Operating voltage

- Engine(s) oil pressure

- Engine (s) temperature

- Transmission temperature

- Hydraulic oil temperature or warning light

- Diesel Exhaust Fluid (DEF) level

- Diesel Particulate Filter (DPF) service/regen indicator

- Air pressure gauge (dual system, physical/mechanical gauge required o Warning Indicator Icons

- Low Air Pressure

- Anti-lock Braking System (ABS) Fail (if applicable)

- ABS Communication Lost (if applicable)

- Engine Stop, Engine fault warning

- Engine low oil pressure

- Engine air intake restriction

- Transmission overheat

- Transmission Communication Lost

- Engine communication lost

- Control system node communication lost

- Low Voltage

- Parking brake indicator

- Windshield washer/deluge system fluid level indicator

- Message control center

- Warning device indicator, open door, transmission in gear, etc.

o All interior controls and displays incorporate variable intensity lighting

EXTERIOR COMPONTENTS

· The vehicle equipped to allow safe and easy access to all elevated components by the use of slip resistant steps and safety handrails following Occupational Safety and Health Administration (OSHA) standards for 3-points of contact for mounting/dismounting. All handrails free from sharp edges or corners. Walk platforms configured with slip resistant material to prevent slipping and falling from elevated locations.

· Doors (hinges) bolted or welded to the door(s) and cab frame and provided with proper restraints against high winds. Doors and door locks complying with FMVSS 206 Door Locks & Door Retention Components. Door handle positioned for use without bending or stooping.

· Rear View Mirrors fitted with dual, heated, motorized (remote controlled) mounted to the exterior of the cab. Mirrors mounted directly to the cab A-pillar with a stabilizer bar connecting the mirror frame to the outer door frame in lieu of mounting mirrors to the door itself. Each mirror assembly incorporating a separately controlled motorized convex mirror either integrated into the main mirror frame or add-on 6 inch diameter units. Mirror controls shall be operated from the operator environment. Each primary mirror head surface area not less than 100 square inches (650 cm2).

· Exterior Lighting (Unless otherwise specified, lighting and conspicuity conforming to the requirements of FMVSS 108 plus the following as a minimum:

o Two headlights with high/low beam settings.

o Stop, Turn, Tail, lighting (mounted front and rear).

o High mounted stop lights.

o Clearance and side marker lights to include:

§ Three (3) light cluster amber front, red rear.

§ Plow, broom and air blast end marker lights, amber front, red rear.

§ Side marker lights spaced approximately every four 4 feet.

§ Illuminated license plate mounting bracket.

· Two (2) backup lights (minimum).

NOTE: All lights protected and/or positioned to prevent snow buildup.

In addition to FMVSS 108 headlights, the vehicle equipped with Auxiliary or Specialty Lighting. Typically, this includes four (4) light assemblies mounted and adjusted so as to illuminate the plowing path. The subject lights controlled by an interlocking circuit that shall automatically switch off the FMVSS 108 headlights in coordination with the operation of the auxiliary lighting.

· Rear View Camera.

o A color low-light capable backup camera installed at the rear of the unit with a color monitor (minimum 6 inch LCD screen) in the operator environment providing adequate visibility at the rear of the vehicle under all conditions, including low light conditions.

o Camera mounted at the rear location to provide rearward vision, and the monitor installed in the cab in a location convenient to driver’s vision. The camera and monitor connected by an integrated system.

The camera system includes a small, rearward facing flood light that is activated when the carrier vehicle is placed in reverse gear.

NOTE: May be designed to operate only when the transmission is placed in reverse gear.

o Back-up warning systems (minimum 100 dB, waterproof)

· Dual air horns (electric or air) – protected from snow accumulation/damage.

DEDICATED PRIME MOVER

· Prime Mover Single Engine o JP-8 compatible export diesel engine. Diesel Particulate Filter (DEF) is not acceptable.

o Minimum of 450 gross horsepower § Engine capable of operating prime mover without putting undue strain or stress on the vehicle when operating at maximum efficiency of the machine.

o High Idle and Cruise Control o Cold Weather Package – Single point connect port § Capable to operate at temperatures down to -50o F § Key activated ether-starting aid § Heated battery box § Engine block heater

§ Oil pan heater § Heavy duty hoses o Remote coolant and engine oil drain kit for chassis engine o Heavy duty silicone heater and radiator hoses o Lube Data Plate and Government Data Labels § All service locations shall be labeled, easily accessible from both sides of the machine, and protected from damage during vehicle operation. Engine cover shall be constructed of light weight material and operated by means of manual or mechanically assisted mechanism. Safety bars/latches shall be installed to prevent covers from closing once opened.

o Minimum chassis weight GVWR of 45,000 pounds o Heavy duty automatic, 4-speed, transmission within gear warning system o Two speed automatic locking/unlocking transfer case o Front axle 27,000 lbs, rear axle 23,000 lbs (or determined by manufacturer’s engineers).

o All-Wheel steer with front, coordinated, crab and joystick/manual steer options o Heavy duty single channel frame rails, Grade 8 bolted, heat treated, industry standard 34" width o Heavy duty rear bumper with a minimum of two (2) tow hooks NOTE: Pintle hook shall not be installed on the rear bumper o Chassis undercoating o Shipping protection – Overseas

· Master electrical battery disconnect switch o Remote battery jumper lugs mounted on exterior location of vehicle, labeled o Battery charger with receptacle o On-board trickle battery charger with 4 (four) batteries – sufficiently sized for proper operation of the vehicle.

o Standard 120, 15A plug o Minimum 270-amp alternator

· Full air brakes with anti-lock and air dryers, air release parking brakes. Remote quick drain kit for air tanks. Cartridge type air-dryer filters. Braking system shall conform to FMVSS 121.

FUEL SYSTEM

o Twin fuel tanks having a minimum total capacity of 200 gallons. Each tank fabricated using heavy gauge steel, properly secured to the chassis and labeled “Diesel Fuel Only”. The single side filler neck capable of filling both tanks; filler cap secured to the tank by means of a safety chain/cable made of non-conductive material. Fuel tanks interconnected to allow equalized fuel level in both tanks.

o A heated fuel/water separator installed in the supply line to the engine fuel injectors.

Each tanks equipped with a maintenance drain plug and properly labeled.

CHASSIS

o Minimum chassis weight GVWR of 50,000 pounds o Heavy duty automatic, 4-speed, transmission within gear warning system o Two speed automatic locking/unlocking transfer case o Front axle 27,000 lbs, rear axle 23,000 lbs o All wheel steer with front, coordinated, crab and joystick/manual steer option o Heavy duty single channel frame rails, Grade 8 bolted, heat treated, industry standard 34" width

· Blades o Flared 20 foot front mounted plow, mild steel cutting edge (standard) o Minimum plow casters (4) – two each side o Spare plow caster tire and rim (minimum 2)

· Cutting Edges o 20 foot cutting edges - poly or steel

· Underbody scraper – 3 function - 12 foot with blade with bolt-on cutting edges o Note: Delete underbody scraper if not required

· Chassis undercoating

· Shipping protection – Overseas

· Tow hooks, rear mounted, minimum (2) two

· Manufacturer’s standard color

· Minimum 12-month warranty

· Military Marking / Data Plates

· Data Plates will include the following information, at a minimum:

NOMENCLATURE: _______________________________

MAKE AND MODEL: ______________________________

MANUFACTURER’S SERIAL #: (VIN_____________________________)

REGISTRATION #:__________________________

NSN: ________________________

VEHICLE CURB WEIGHT: __________LBS

PAYLOAD, MAXIMUM: __________LBS

GROSS WEIGHT, MAX: __________LBS

GROSS WEIGHT COMB MAX: _______LBS

DATE OF DELIVERY: _________________

WARRANTY__________MO___________MILES

CONTRACT #: _____________________________

SHIP TO ____________________________

MARK FOR _________________________

US PROPERTY

ADDITIONAL TECHNICAL DATA REQUIREMENTS:

o The Contractor shall provide one (1) complete set of manuals to include, Operators, Parts and Service to the Program Office at the address listed below. Also, manuals for any mounted or accessory equipment shall be provided. The data format shall be paper (printed) operators manuals, service, and parts manuals. The data format shall be paper (printed) operators manuals, and digital (CD-ROM) service and parts manuals and shipped with the vehicles.

o All data shall be supplied in accordance with DFARS clause 252.227-7015.

o Shipping address for technical data packages:

Attn: Brian Meyer COR / Contract Performance Evaluator 3015 Montgomery Road Building 3015, Floor 2 Fort Wainwright, Alaska 99

ATTACH. 2 AIRFIELD SNOW PLOW P

ATTACH. 3 AIRFIELD SNOW BROOM

Snow Broom, Multi-Purpose w/snow blower attachment

Basic specifications and construction

(Standard Equipment)

The vehicle and all furnished accessories shall comply with all Federal Motor Vehicle Safety Standards (FMVSS) in effect at the time of manufacture.

This specification covers the minimum configuration requirements for a SNOW BROOM (DEDICATED) also referred to as a HIGH SPEED AIRFIELD SNOW BROOM for airport/airfield snow control operations. The unit shall consist of a prime mover with a dedicated snow broom capable of moving light amounts of snow across the airport/airfield paved areas in accordance with Advisory Circular (AC) 150/5220- 20.

NOTE: Pictures are visual reference only and not meant to request specific brand

Vehicle having the ability to move airfield contaminants at rated speeds of equal to or greater than 35 MPH (depending on conditions).

· Positive tire-to-ground traction effort while operating and performing full wall-to-wall turning diameter of 100 feet or less with broom unit attachment unless otherwise specified. Equipped with “All-Wheel” drive axles with differential lock.

· Snow broom capable of moving snow density of 5 to10 pounds per cubic foot at least 25 feet across the standing surface.

o Estimated snow density (weight): ? lbs/ft3

- Dry snow density: ≤ 10 lbs/ft3

- Medium snow density: > 10 to < 20 lbs/ft3

- Wet snow density: > 20 lbs ft3

· The prime mover unit and broom system capable of continuous operation with the necessary refueling during an entire snow event without maintenance. For the purpose of this performance requirement a snow event is considered to be at least 72 hours in duration.

OPERATOR’S ENVIRONMENT

Operator Environment: (two-person cab), acoustically insulated to less than 85 dB as measured 6 inches from the driver’s ear at full engine load. Cab attached to frame with vibration isolating mounts. Cab floor insulated with thermal-acoustical sound barrier floor matting.

· Interior equipped with:

o Standard cab interior as determined/designed by manufacturer.

§ Rollover Protection System (ROPS) / Falling Object Protection System (FOPS) structures meeting Society Automotive Engineers (SAE) and International Standards Organization (ISO) requirements.

o Adjustable, telescoping, tilt steering column.

o Steering: straight, articulated (circle), crab modes

§ Secondary steering system if available o Front and side interior sun visors, (opaque and/or tinted).

o NFPA approved fire extinguisher, 2A-10BC interior mounted fire extinguisher (1).

o Electrically heated windshield (Department of Transportation [DOT] approved Auto Safety (AS)-1 windshield glass).

o Auxiliary 12-volt power outlets (x 2).

o Cup holders (x 2).

o Coat hooks (x 2).

o Communication radio ready connections.

· Seats of premium quality, 6-way adjustable air ride, fully adjustable in the horizontal (fore and aft), and vertical positions with high or medium raised back, foldable arm rests, adjustable lumbar support, cloth covered, and load adjustable. Seats equipped with three-point safety belts, certified by the vehicle manufacturer to have been tested and in conformance with FMVSS requirements. Adjustments provide for ease of operation for individuals between the 5th and 95th percentile individuals. Ample visibility to both sides of the vehicle. Operator’s armrests configured in such a manner to allow the operator to sufficiently manipulate the vehicle controls without placing stress or strain on the operator.

o Power window side windows (AS-2 or AS-3 glass).

NOTE: AS-1 indicates Front windshields on a motorized vehicle with a light transmittance tint of nothing below 75%. AS-2 indicates Side windows on a motorized vehicle with a light transmittance tint of nothing below 70%. AS-3 indicates Side windows on a motorized vehicle with a light transmittance tint below 70%.

o Windshield washing and wiping (In Accordance With [IAW)] FMVSS 104) o Heated windshield, wipers, washer fluid side window wiper/washer system.

o Windshield deluge system (minimum shall consist of 5 GPM pump, 15-gallon reservoir, nozzles above…