Attachment 5 PWS Refuse and Recyling.pdf

70Z08421QPFC02900

REFUSE AND RECYCLING COLLECTION AND DISPOSAL SERVICES

USCG BASE CAPE COD, MASSACHUSETTS

PEFORMANCE WORK STATEMENT (PWS)

Refuse and Recycling Collection and Disposal Services

U.S. Coast Guard Base Cape Cod, MA

1.0 INTRODUCTION

The contractor shall provide all direct and indirect labor, transportation, supervision, materials, equipment, disposal costs and all incidental and related work and service necessary to collect and dispose of solid waste refuse as specified herein. The services shall be performed at the U.S. Coast Guard (USCG)

Base Cape Cod (BCC), MA located within the confines of the Joint Base Cape Cod (JBCC), Buzzards Bay, MA 02542, as described in the Performance Work Statement (PWS).

2.0 BACKGROUND

Coast Guard Base Cape Cod campus is 3,500 acres consisting of 161 single and multifamily housing units and 39 buildings. Base Cape Cod will provide and maintain a safe, clean and healthy environment for all residents, military/civilian personnel and members of the public. To accomplish this mission, it is essential that the properties and facilities of the areas specified herein have collection and disposal services of refuse.

The contractor shall ensure environmentally sound, sanitary conditions, and aesthetic appearance of federal buildings. All refuse collected in performance of this contract shall be disposed at a certified off-site commercial facility, which complies with all applicable federal, state, and local laws, statutes and regulations.

No additional off-site transfer or disposal costs will be incurred by the government.

3.0 DEFINITIONS.

Where "as shown", "as indicated", "as detailed", or words of similar import are used, it shall be understood that reference is made to this PWS and associated document attachments.

Where "as directed", "as required", "as permitted", "approval", "acceptance", or words of similar import are used, it shall be understood that direction, requirement, permission, approval, or acceptance of the

COR is intended unless stated otherwise.

Applicable Law - all laws, regulations, rules, orders, judgments, degrees, permits, approval, or other requirement of any governmental agency having the organic materials that are enforced on the effective date and as they may be enacted, issued or amended during the term of this agreement.

Ashes - the residue from burned wood, coal, and other combustible material.

Bulk Items - discarded appliances, furniture, tires, carpets, mattresses, and similar large items, which require special collection due to their size, but can be collected without the assistance of special loading equipment (such as forklifts or cranes) and without violating vehicle load limits. Includes such items as furniture, TV sets, mattresses, scrap material, rugs, and otherwise non-recyclable material. It does not include abandoned automobiles.

Collection - accumulated refuse from any one pickup station at any one time, regardless of the number of refuse containers or other boxes, bundles or bags, etc.

Collection Station - designated points where solid wastes will be placed for collection by the Contractor;

may also be referred to as “collection point”, “pick-up stations”, or “collection site”.

Commingled - mixture of aluminum, glass, tin, bimetal, and plastic recyclables as defined in this section, which are placed in a common collection container.

Container - refers to refuse container and/or recyclable container; cans, drums, bins, dumpsters, or similar receptacles which can be handled easily and multiple containers, which can be handled by mechanical truck mounted hoists.

Contractor - the term “Contractor” as used herein refers to both the prime contractor and any subcontractors. The prime Contractor shall insure that subcontractors comply with the provisions of this contract.

Construction Materials - roofing and similar materials associated with construction work.

Contracting Officer’s Representative (COR) - the individual designated by the Contracting Officer to monitor the contractor’s performance and to ensure all technical requirements are met.

Debris - grass cuttings, tree trimmings, stumps, street sweepings, and any other vegetative items; also includes roofing and construction waste and any other non-hazardous or non-regulated materials.

Delivery - placement of solid waste, recyclable materials, or organic materials by a generator in a receptacle and/or at a location that is designated for collection pursuant to the City's Municipal Code.

Discarded Materials - solid waste, recyclable materials, or organic materials by a generator in a receptacle and/or at a location that is designated for collection pursuant to the City's Municipal Code.

Disposal - the process of spreading and covering in approved landfill or processing of waste and recyclables in such a manner to reclaim, reuse, or compost.

Disposal Facility - locations authorized or defined by Federal, State, or Local Governments to receive and dispose of refuse.

Garbage - animal and vegetable waste (and containers thereof) resulting from the handling, preparation, cooking and consumption of foods. This does not include regulated garbage (wet, foreign garbage).

Edible (or hog food) garbage is the portion of waste food which has been segregated for salvage.

Garbage and Trash Collection - an organized and systematic method of collection and transportation of garbage and trash from the designated pickup points to the site of disposal.

Generator - any person as defined by the Public Resources Code whose act or process produces solid waste, recyclable materials or organic materials as defined in the Public Resources Code, or whose act first causes solid waste to become subject to regulation.

Glass - all food and beverage containers made from silica or sand, soda ash and limestone, which include clear, brown and green bottles and jars. Neck rings, lids and labels may be left on. This definition does not include broken glass, mirrors, or other flat-glass, dishes, drinking glasses, light bulbs, or any ceramic products.

Hazardous Materials - any item or agent (biological, chemical, radiological, and/or physical), which has the potential to cause harm to humans, animals, or the environment, either by itself or through interaction with other factors. E.G. pesticides, petroleum, oils, & lubricants, solvents, mercury, batteries.

Hazardous Waste - a hazardous waste is a waste with properties that make it dangerous or capable of having a harmful effect on human health or the environment as defined by 40 CFR 261.3

Industrial Waste - wood scraps, broken furniture, refuse, garbage, debris, all types of non-hazardous.

Leaves and Grass Clippings - clean, uncontaminated, leaves and/or grass clippings free of wood, sticks, trash and garbage.

Metal - all types metal and aluminum that can be recycled to include large scraps

Mixed Paper - all uncontaminated paper material including newspaper, corrugated cardboard, lightweight cardboard, junk mail, magazines, office paper, computer paper and shredded paper. Not included is waxed paper, wax-coated cardboard, plastic coated paper or cardboard boxes contaminated with any residual food material.

Pick-Up Points (or Stations) - locations designated by the Government where refuse is placed in containers and may be conveniently, efficiently, and regularly emptied or replaced by the Contractor.

Premises - any land or building in the City where solid waste, recyclable materials or organic materials are generated or accumulated.

Receptacles (or Containers) - cans, drums, bins, dumpsters, and multiple containers or similar receptacles which can be handled easily either physically or by mechanical truck mounted hoists.

Recyclable Material/ Recyclables - materials used for their original intended purpose that still have useful physical chemical properties after service and can be transformed into new products or other purposes.

Includes any of the following listed items or combination of the following:

• Corrugated cardboard

• Glass

• Tin or aluminum

• Plastic number 1 thru 7

• Paper, magazines, new papers, paper bags, chipboard, etc.

The items deemed to be recyclable may be expanded during the term of this contract.

Refuse - includes all garbage, trash, recyclable material, ashes, debris, and other similar waste material.

NOT included: explosive or incendiary waste, hazardous waste and contaminated waste from medical and radiological processes. Normal refuse shall not include rocks, earth, construction waste, large or heavy metal objects, large appliances, automobile body parts, explosives, chemicals, concrete, regulated garbage (wet, foreign garbage), other refuse of weights exceeding 80 pounds per object. Materials considered RECYCLABLE are not included.

Refuse Collection - system of transporting refuse, including non-accountable salvage, from receptacles of identified locations and/or stations to the point(s) of disposal. Includes the hauling of garbage to the transfer station when required by the terms of salvage contract.

Residential - includes all the single family or multiple family dwellings maintained by USCG Base Cape

Cod.

Scrap Metal - all bulk ferrous and non-ferrous metals, including iron, steel, aluminum, bronze, and brass.

Metal must be free of other material and all components must be broken down.

Single-stream recycling - also known as “fully commingled” or "single-sort" recycling; refers to a system in which all paper fibers, plastics, metals, and other containers are mixed in a collection truck, instead of being sorted by the depositor into separate commodities (newspaper, paperboard, corrugated fiberboard, plastic, glass, etc.) and handled separately throughout the collection process. In single-stream, both the collection and processing systems are designed to handle this fully commingled mixture of recyclables, with materials being separated for reuse at a materials recovery facility.

Solid Waste - refuse and other discarded solid materials resulting from commercial, industrial, residential, and community activities. It does not include hazardous wastes, infectious/medical wastes, solids or dissolved materials in domestic sewage, or other significant pollutants in water resources such as silt, dissolved or suspended solids in industrial waste, water effluents, dissolved materials in irrigation return flow, or other common water pollutants.

Spillage - any refuse dislodged from containers and/or solid waste collecting equipment in the course of collection and disposal.

Support Building - facility controlled or operated by the Coast Guard other than family housing units.

Transportation - the act of transporting or state of being transported.

Tote – a 96-gallon waste container or 65 gallon waste container.

Yard Waste - grass cuttings, tree trimmings, leaves, pine straw, limbs, and stumps.

4.0 SCOPE

The contractor shall provide all labor and equipment necessary to perform the collection, transportation and disposal of refuse generated at USCG Base Cape Cod, MA. The contractor shall provide collection of

Municipal Solid Waste (MSW) from facilities, commercial, and residential areas in accordance with the

PWS.

These services entail collection of MSW refuse, Single Stream Recycling (SSR) and disposal services for all

U.S. Coast Guard maintained family housing units (residential), U.S. Coast Guard support buildings

(facility), and food refuse removal services at U.S. Coast Guard galley (commercial).

http://en.wikipedia.org/wiki/Recycling http://en.wikipedia.org/wiki/Paper http://en.wikipedia.org/wiki/Newspaper http://en.wikipedia.org/wiki/Newspaper http://en.wikipedia.org/wiki/Corrugated_fiberboard http://en.wikipedia.org/wiki/Corrugated_fiberboard http://en.wikipedia.org/wiki/Corrugated_fiberboard http://en.wikipedia.org/wiki/Plastic http://en.wikipedia.org/wiki/Materials_recovery_facility http://en.wikipedia.org/wiki/Materials_recovery_facility

4.1 CONTAINER SIZE, COLLECTION LOCATION, AND FREQUENCY

Attachments 1 and 2 identifies the required size, type, location, and number of containers and the frequency of collection.

4.2 RESIDENTIAL COLLECTION. Residential refuse collection and disposal service will include all solid waste and recyclable materials normally associated with residential activities, with the exception of yard waste and hazardous waste.

4.3 SUPPORT COLLECTION. Support building activities refuse collection and disposal will only include solid waste resulting from industrial and commercial activities such as garbage, construction and demolition debris.

4.4 DISPOSAL REQUIREMENTS. All refuse collected in performance of this contract shall be disposed at a certified waste disposal facility licensed and regulated by the State of Massachusetts in adherence with all applicable State and Federal laws. All recyclable materials shall be properly recycled at a permitted recycling facility.

4.5 FIRM FIXED PRICE WORK – CLIN X01AA-AD.

The Contractor shall provide all labor and equipment, including containers for collection, transportation, and disposal of refuse as described in the PWS. Immediately prior to pick up at each location the contractor employees shall inspect each container to ensure that it is not contaminated with recyclables, hazardous material, or other matter outside the scope of that for which it is designated. In the event that a container is found to be contaminated, the contractor shall not make that particular pick-up and shall notify the Contracting Officer Representative (COR) as to the location and reason for non-pick up prior to departing for disposal.

4.6 TYPES OF MATERIALS. Materials to be collected consist of (but are not limited to): kitchen waste, paper, rags, cloth, cans, bottles, boxes, cartons, crates, worn-out household articles, newspapers and magazines, and other articles of similar nature. Also included is construction debris such as pipe, concrete block, lumber and worn out furniture. Materials not included as part of this contract includes hazardous waste, explosives, biohazard waste, or other salvageable material.

4.7 ESTIMATED WORKLOAD FACTORS. Refer to Attachment 4.

4.8 POST AWARD CONFERENCE. At least 5 days before contract start date, the Contractor Project

Manager shall schedule a pre-start meeting. This meeting will include the KO, COR, environmental staff and other BCC representatives to discuss and develop a mutual understanding relative to scheduling and administration of work performed under this contract, as follows:

• Schedule of the work

• Safety measures (safety plan)

• Inspection methods by the Quality Control Inspector

• Method of recycling and refuse collection

• Points of contact (phone numbers) in case of emergencies; and, a list of Persons Employed under the contract.

• Coordination of access to the working areas

• Verification of the quantities and location of refuse collection areas

4.9 SAFETY REQUIREMENTS.

4.9.1 Safety Plan. All work shall be conducted in a safe manner and shall comply with all applicable federal, state and local safety standards and requirements. The Government reserves the right to inspect for compliance with safety standards and requirements. The contractor shall develop and submit a safety plan (as part of the Quality Control Plan – see Section 6.0 – Deliverables) within 15 days after contract award, and shall updated plan as needed. The contractor shall ensure all employees working on BCC are familiar with the content and details of the safety plan. The contractor's safety plan shall comply with all Federal and State laws, including OSHA and regulations set forth in 29 CFR 1910 and 29 CFR 1926 and in Commandant Instructions (COMDINTS) M5100.47 and M11000.11. At a minimum, the safety program shall include the following:

• Compliance with Codes

• Assignment of Responsibility

• Safety Indoctrination and Training

• Inspections, Reports and Control of Hazards

• General Housekeeping and Cleanup

• Protection of Employees (Contactor & Government)

• Inclement or Destructive Weather Measures

All power equipment shall be operated within the safety parameters as defined by OSHA. Equipment shall be operated with particular care when near pedestrians and especially near children. Equipment shall be in working, safe, and good mechanical condition to operate on U.S. Coast Guard property. There shall be no visible oil or refuse spills on the road due to contractor carelessness or inadequate equipment. The contractor is responsible for immediate cleanup of oil and refuse spills resulting from carelessness or inadequate equipment.

4.9.2 Accident Prevention. In addition to addressing the aforementioned, the contractor shall maintain a record of property damage, accidents, and fires caused by the contractor or subcontractor employees.

The contractor shall report the damages, fires or accidents to the Contracting Officer in accordance with Homeland Security Acquisition Regulation (HSAR) Clause 3052.223-90 Accident and Fire Reporting (Dec 2003). The contractor shall comply with mishap reporting procedures found in the latest edition of

COMDTINST M5100, Safety and Environmental Health Manual. The procedures are for information and data gathering purposes only. The Government will supply the contractor with the necessary forms and instructions for completion of the forms. All mishaps shall be reported to the COR within 24 hours.

4.9.3 Results of Safety Non-Compliance. If the contractor fails or refuses to promptly comply with safety requirements, the Contracting Officer may issue an order stopping all or part of the work until the contractor takes satisfactory corrective action. No part of the time lost due to any such stop order shall be made the subject of a claim for extension of time or for excess costs or damages to the contractor.

4.9.4 Hazardous Materials. The Contractor shall inform the COR of any hazardous materials found in the performance of this project and ensure they are not disposed of until coordinated by the Government Environmental Technician.

4.9.5 Damaged Equipment/Property. The contractor shall be responsible for restoring any damaged property or equipment caused by the contractor or the contractor’s employees. The restoration shall be to its original condition at no additional cost to the Government.

4.9.6 Inclement Weather Schedule. The contractor shall collect refuse during periods of inclement weather. In cases of severe weather, the COR may authorize exceptions. When exceptions are granted, the contractor shall make up all missed collections within 24 hours after the severe weather has terminated, unless the COR authorizes additional time.

4.9.7 Destructive Weather. Upon notification by the COR the activity is ordered to take precautionary measures to prevent damage by destructive weather, the contractor shall collect all solid waste and, as directed by the COR, temporarily relocate containers and/or appropriately tie-down containers for safety precaution. The COR will notify the contractor when such containers require return to their original location/condition. This service shall be provided at no additional cost to the government.

4.10 Licenses and Permits. The contractor shall obtain (without any additional cost to the Government) and submit as required the necessary licenses and disposal permits in accordance with any requirements of the municipality, county, and state of Massachusetts for the performance of this work and for complying with all applicable Federal, State and local laws, and shall maintain such licensing throughout the term of this contract.

See Section 6.0 – Deliverables.

4.11 ENVIRONMENTAL REQUIREMENTS.

4.11.1 Results of Environmental Non-Compliance. If the contractor fails or refuses to promptly comply with Federal, State and Local environmental requirements, the Contracting Officer may issue an order stopping all or part of the work until the contractor takes satisfactory corrective action. No part of the time lost due to any such stop order shall be made the subject of a claim for extension of time or for excess costs or damages to the contractor.

5.0 TECHNICAL REQUIREMENTS

5.1 GENERAL

5.1.1 Collection Hours. Collection shall be made from family housing units and support buildings and Activities between the hours of 7:30 a.m. through 4:00 p.m. on collection days identified in Attachments 1 and 2. Collection outside these hours shall require prior approval of the COR. If the contractor desires to work on Saturday, Sunday, holidays, or outside regular working hours, he/she must submit an application to the COR for approval. There will be no additional compensation for work performed outside regular working hours.

5.1.2 Schedule. The contractor shall schedule work that will cause the least interference with normal occurrence of Government business. The contractor shall establish a plan for vehicle routes and collection schedules to be submitted to the COR for approval within fifteen (15) calendar days prior to the start of the contract and every option year awarded. Approved schedules shall be adhered to, and all proposed changes shall be approved by the Contracting Officer and submitted at least (3) working days in advance.

5.1.2.1 Inclement Weather Schedule. The contractor shall collect refuse during periods of inclement weather. In cases of severe weather, the COR may authorize exceptions. When exceptions are granted, the contractor shall make up all missed collections within 24 hours after the severe weather has terminated, unless the COR authorizes additional time.

5.1.2.2 Destructive Weather. Upon notification by the COR the activity is ordered to take precautionary measures to prevent damage by destructive weather, the contractor shall collect all solid waste and, as directed by the COR, temporarily relocate containers and/or appropriately tie-down containers for safety precaution. The COR will notify the contractor when such containers require return to their original location/condition. This service shall be provided at no additional cost to the government.

5.1.2.3 Missed Pickups. The contractor shall collect solid wastes at missed scheduled pickup stations within twenty-four (24) hours after discovery by the contractor's quality control program or notification by the COR.

5.1.3 Cubic Yard Capacities. Proposed capacity of containers is indicated in Attachments 1 and 2. The

Government reserves the right to change the cubic yard capacity at any collection station or change the number of collection stations as long as it does not increase the overall total cubic yard capacity requirement of this PWS. The Government may also reduce the frequency of collections.

5.2 REFUSE CONTAINERS.

5.2.1 Contractor-Furnished Containers. For refuse collection at residential and support buildings, the contractor shall furnish all containers required for the performance of this contract. All contractor furnished items shall be subject to the inspection and approval of the COR prior to and during the life of the contract. A container that is not in compliance with the standards of the contract shall be repaired and/or replaced within 48 hours upon telephone notification by the Contracting Officer’s Representative (COR). Upon completion of the contract, all equipment furnished by the contractor shall be removed from the sites prior to approval of the final payment.

5.2.2 Government-Furnished Containers. The Government is not required to furnish containers of any type; however, under certain circumstances at the Government’s interest, the Government may decide to furnish containers. The following restrictions apply:

a. Should the Government choose to use the Government furnished equipment, the contractor shall conduct periodic servicing, maintenance, and repair at no additional cost to the

Government. The total or partial breakdown or failure of the equipment shall not relieve the Contractor of responsibility to fully perform the work of the contract.

b. The Contractor and the COR shall conduct a joint inventory of Government furnished equipment before commencing work under this contract to determine the exact number and serviceability of Government furnished equipment (reusable residential containers). The Contractor shall then certify the findings of this inventory and indicate, in writing, which items of equipment will be used to provide services under this contract. See Section 6.0 – Deliverables.

c. Equipment not selected for use will be deleted from the inventory and will no longer be available for the contractor's use. The contractor shall assume accounting responsibility for equipment remaining on the inventory, and subsequently report inventory discrepancies to the COR. Government furnished equipment shall not be removed from the base unless approved by the COR in writing, except as otherwise specified below.

d. Equipment that becomes worn out due to normal wear and tear shall be returned to the Government and its replacement shall be the responsibility of the contractor at no additional cost to the Government. Equipment so acquired shall remain the property of the contractor.

e. The contractor shall be responsible for the cost of any repairs or replacement caused by negligence or abuse by the contractor or his/her employees.

f. Upon completion or termination of the contract, all Government-owned equipment shall be returned to the Government in the same condition as received, except for normal wear and tear.

5.2.3 Inaccessible Containers. All reasonable attempts shall be made by the contractor to complete collections as scheduled. Should access to a container be obstructed, the contractor shall notify the designated government representative immediately. If access to the container is made available prior to the final scheduled pickup of the day, the collection shall be made at no additional cost to the government.

5.2.4 Relocation of Containers. The Government reserves the right to change location of residential and support building containers/dumpsters during the length of the contract and shall notify the contractor prior to relocation.

The KO and COR may require the contractor to relocate the containers. The contractor will be notified verbally or in writing by the KO or the COR at least two (2) working days prior to the event. If a verbal request is made, the KO or COR will confirm in writing. The relocation will be at no cost to the Government. The contractor shall make every effort to relocate on a scheduled collection day to mitigate disruption to Government operations. The Government reserves the right to relocate contractor-furnished containers (at no cost to the Government), under emergency/special situations, or if the contractor does not relocate the container within the time specified - after the two (2) working day notice.

5.2.5 Commercial Container Cleaning. The Contractor is responsible for cleaning all commercial containers and the costs associated with container cleaning. All waste and residue matter shall be cleaned from all surfaces. The Government prohibits the discharge of wash water or detergents from container cleaning to the environment.

5.2.6 Residential Refuse Containers. The Container List for residential refuse, identifying the size, location and frequency of collection is provided in Attachment 2. A map is provided in Attachment 3. Housing units are located in Map Grids 68-69/12-13. There are 160 housing units in all.

The Contractor shall provide and maintain two (2) 96-gallon capacity waste container (i.e. tote) for each of the

160 housing units, to collect both Municipal Solid Waste (MSW) and Single Stream Recycling (SSR), in total there are 320 totes.

5.2.6.1 Residential Container Specifications. Specification of 96-gallon totes include:

a. Containers will have distinctive colored to assist in identifying the specific waste stream as they be provided for the collection of both MSW and SSR. The Government prefers green or blue for the recyclable materials and brown, gray or black for the trash.

b. Containers shall be constructed of molded polyethylene plastic, with a snapping fastener cover or a similar lock-on cover and heavy-duty wheels.

c. Containers that are cracked, leaking, missing lids, vandalized, will not lock, or are otherwise damaged or unserviceable shall be replaced by the contractor. Containers that are identified as unserviceable by the Government representative shall be replaced within two working day.

5.2.7 Support Building (Commercial) Containers. The Container List for support buildings, identifying the size, location and frequency of collection is provided in Attachment 1. A map is provided in

Attachment 3. There are 22 commercial containers and 3 food waste containers.

5.2.7.1 Support Building Container Specifications.

a. Except where otherwise noted, all containers shall be standard commercial-industrial type, of heavy gauge metal construction, leak proof, and designed for mechanized handling.

b. Containers that are mounted on wheels shall have a positive breaking/locking device to prevent inadvertent movement.

c. Containers shall be freshly painted at the start of the contract, and periodically during the term of the contract to maintain a pleasing appearance.

d. The Contractor's name and local phone number shall be prominently displayed on each container.

e. Containers must remain easily accessible to customers.

f. Containers must have latches to keep lids closed.

g. All containers must remain in good, workable condition. All doors, lids, hinges, rollers, breaking devices, and other moving parts shall be maintained to keep containers serviceable.

The contractor shall maintain all contractor and government provided containers ensuring they are free of unpleasant odors, dirt, debris, and pests.

h. Bent, damaged, leaking, rusting, and unsightly containers shall be repaired and repainted or replaced at the Contractor's option within one week of notification by the COR at no additional cost to the government. The contractor shall perform all painting, repair and other maintenance tasks off-base. Containers which are removed from the collection site for cleaning for more than 90 minutes shall be replaced with clean equivalent size containers which meet all the requirements specified in the contract.

5.3 REFUSE COLLECTION STATIONS.

5.3.1 Residential Collection. Prior to collection on scheduled collection days, housing occupants will place all MSW and SSR in the provided 96 gallon containers for curbside pickup. Household garbage will normally be placed in occupant furnished disposable plastic or paper bags. Housing occupants will also loosely place all clean recyclable materials in provided 96 gallon container for curbside pickup. Refer to

Attachment 2 for collection station location, collection frequency, and containers size and quantity.

5.3.2 Support Building (Commercial) Collection. The contractor shall coordinate with the COR on the positioning of collection containers, which will be located for customer ease in depositing refuse. This may require repositioning of containers from time to time. The contractor shall position containers to minimize interference with adjacent parking areas, sidewalks, roadways, overhead utilities, trees, and other potential obstructions. Refer to Attachment 1 for collection station location, collection frequency, and container size and quantity.

5.3.2.1 Food Waste Collection. Contractor shall provide food waste collections for the Base Cape Cod

Dining Facility (i.e. Galley).

Food waste collection area and containers will be kept clean and organized by the contractor to meet applicable industry standards for food service cleanliness or when specifically directed to do so by the COR. All food waste containers will be swapped out with clean containers on a weekly basis. They will be free of damage, in good working order, free from residual food matter and leakage.

Food waste collection stations will be serviced at a minimum of once a week, on Fridays and possibly up to twice per week in the warmer months, conducted on Tuesday and Fridays. Any missed collections will take place on the next business day. Refer to Attachment 1 for collection station location, collection frequency, and container size and quantity.

5.3.3 Bulk Refuse Collection Stations. The contractor shall provide thirty (30) cubic yard containers at the location and in the quantities as directed by the COR. The bulk refuse collection stations may change periodically to accommodate the needs of the government. The contractor will be required to relocate the dumpster as directed by the COR at no additional cost to the government. The contractor shall also provide additional thirty cubic yard containers to handle solid waste generated by special events such as spring cleanups, fall cleanups, construction projects, etc.

5.3.4 Maintenance of Collection Station Areas. The contents of the containers shall be thoroughly and completely collected. The contractor shall return the containers to their original location after servicing, in an upright position with the lids securely in place (closed). As directed by the COR, the contractor will be responsible for keeping collection areas free of refuse and debris. The contractor will also be responsible for immediately cleaning up any spills which may occur during servicing of containers. All refuse on the ground within 10-feet of the collection station, whether spilled by the contractor or placed there by residents/base personnel, shall be picked up by the contractor during collection. Any cost incurred by the contractor that is accrued while maintaining cleanliness of collection stations shall not alter the contract as awarded.

5.4 REFUSE DISPOSAL.

5.4.1 Refuse Disposal - Residential and Support Buildings. The contractor shall transport and dispose of all solid waste at a certified off-site commercial waste to energy facility that complies with all applicable federal, state, and local laws, statutes and regulations.

The nearest off-site waste to energy disposal facility to USCG Base Cape Cod is COVANTA’S Southeastern Massachusetts Resource Recovery Facility [SEMASS] located in West Wareham, MA approximately 20 miles from USCG Base Cape Cod.

Disposal shall be in accordance with existing local, state, and federal regulations along with the policies and procedures of the disposal facility.

5.4.2 Refuse Disposal Fees. The Contractor shall be responsible for all fees associated with refuse disposal to include disposal fees and/or tipping fees. No additional invoice charges for refuse disposal fees of any type shall be incurred by the Government.

5.5 BULK REFUSE COLLECTION AND DISPOSAL.

5.5.1 Bulk Refuse. Bulk refuse collection and disposal services, utilizing thirty (30) cubic yard containers, are “on-call” requests initiated by the COR as unscheduled collection and disposal services, Not to Exceed (NTE) the estimated quantity stated in the Schedule of Supplies/Services.

a. The COR will indicate the specific number of containers to be provided, their locations, the date on which they must be set in place, collection times, and the anticipated date of removal.

The contractor shall complete this requirement up to the limit specified in CLINs X0002. The government will fund a NTE quantity in the contract. The contractor shall not exceed that quantity without prior modification to this contract to add additional funds. If during the performance year, the quantity of actual delivery and removal of 30CY containers is less than estimated, the government will de-obligate excess funds from the contract. The contractor will only be paid for actual work. The coordination for the delivery/collection of these containers will be directed by the COR.

b. Bulk items as defined in Section 3, all or any combination of the above may be placed into the same container.

5.5.2 Bulk Refuse Container Collection Turnaround Time. The COR will notify the contractor by close of business, Monday through Friday, of the number of containers to be collected and replaced within two (2) working days. The contractor shall deliver an empty container and collect the full container at minimum before noon the on the second day. After pickup of a full bulk waste container, an empty bulk waste container shall be placed within 4 hours or no later than 1600hrs whichever is earlier.

5.6 REFUSE VEHICLES.

5.6.1 Vehicle Standards. The contractor shall use vehicles specifically designed for refuse collection that have watertight bodies and which do not permit loss of refuse. Collection vehicles shall meet all Department of Transportation and OSHA requirements. The contractor’s name and phone number shall be clearly displayed on each vehicle. The Government reserves the right to inspect collection vehicles and to report to the contractor any vehicle that requires repairs or replacement. Any repairs or replacement of collection vehicles must be accomplished within five (5) working days at no additional cost to the Government. The contractor shall at all times be responsible for the safe, clean, careful and efficient operation of his/her equipment and shall comply with all applicable regulations of Base Cape Cod. Speed limits as posted shall be adhered to on Base Cape Cod. The contractor shall assume full liability and is responsible for any loss or damage to Government property caused by his/her operation. The contractor assumes full responsibility for any and all damages or claims for damages for injury to person, property or equipment which might result from the service performed under this contract. Vehicles not meeting the above requirements will not be allowed on Base Cape Cod for the performance of contract requirements.

5.6.2 Weighing of Vehicles. All vehicles used in the collection process shall be empty upon arrival to BCC on the specified collection dates in attachment 1 & 2 and will be subject to inspection by the COR. After completion of scheduled recovery of refuse and waste streams on BCC, all outgoing vehicles shall not be allowed collect any other waste until weights of collected BCC waste has been recorded on an official disposal facility weigh (tare) ticket provided by the operator of disposal facility and then subsequently provided to the COR within 7 days.

5.6.3 Vehicle Maintenance and Cleaning. Vehicles used for waste removal shall be washed at an off base facility as required to ensure they are free of noxious odor, dirt, debris, and pests. Any vehicle used for collection and removal of garbage/refuse shall have a completely enclosed watertight metal container. All vehicles and equipment shall be kept in satisfactory condition, free from insects, odors, loose filth, and be well painted. No drippings of waste or hydraulic fluid will be allowed. The contractor’s conveyance shall be kept covered in such a manner that only a small portion of the refuse content shall be exposed from time to time as the containers are emptied therein. Sufficient covering shall be provided to prevent the wind from scattering of waste from the vehicle onto the USCG BCC property or surrounding areas. The handling of refuse, trash, garbage and recyclables as well as the character of implements, apparatus and personnel employed by the contractor shall conform to the waste industries sanitary standards. Washing of vehicles shall not be performed on USCG BCC property or surrounding areas. The contractor shall immediately pick up and leave no reminisce of spillage of garbage, trash, or recyclables that may leave their vehicle.

6.0 DELIVERABLES.

The Contractor shall submit the following deliverables (reports and other) as identified in the chart below via email in MS Word format, PC combatable.

DELIVERABLES FREQUENCY # OF COPIES –

DISTRIBUTED TO

DATE REQUIRED

Certificate of Insurance

Required by HSAR 3052.228-70 and 52.228-5

Annually TWO –

Contracting Officer only

With Proposal submission if available but no later than 15 days after award; annually post-policy renewal

Quality Control Plan

Paragraph 9.1 of PWS

Update as revised

TWO –

Contracting Officer and COR

Within fifteen (15) days after contract award date; annually post-policy renewal

Safety Plan (as part of Quality

Control Plan)

Sections 4.9.1 and 9.1.0 of PWS revised

ONE – COR Within fifteen (15) days after contract award date; annually post-policy renewal

Disposal Permits and Licenses required the State

Paragraph 4.10, 5.4.1 of PWS revised

ONE –

Contracting Officer

Within fifteen (15) days after contract award date; annually post-policy renewal

Vehicle Route and Collection

Schedule

Paragraph 5.1.2 of PWS

Updated as needed

ONE – COR Within fifteen (15) days after contract award date; annually post-policy renewal

Vehicle/Container Cleaning

Schedule

Updated as needed

TWO –

Contracting Officer and COR

Within fifteen (15) days after contract award date; annually post-policy renewal

Project Manager or Supervisor

Information [Name, Telephone, and

Address]

Updated as needed

TWO –

Contracting Officer and COR

Within fifteen (15) days after contract award date; annually post-policy renewal

Employee Roster (List of all personnel proposed to work on this contract)

Updates as needed

ONE – COR Within fifteen (15) days after contract award date; annually post-policy renewal

Required security background check for all personnel

As required, updated as needed

ONE – COR Within fifteen (15) days before contract start date;

annually post-policy renewal

ATTACHMENT 5 - BCC NCIC

MATRIX/LIST

Paragraph 8.4 of PWS

Joint Inventory of Government

Furnished Equipment

Paragraph 5.2.2.b of PWS

As needed ONE – COR Ten (10) days prior to commencing work under this contract; annually post-policy renewal

Contract Discrepancy Report

ATTACHMENT 6

As needed TWO –

Contracting Officer and COR

Within five (5) days of receipt from COR

7.0 APPLICABLE PUBLICATIONS AND APPENDIXES.

The contractor shall comply with all applicable Federal, State of Massachusetts, and local laws, ordinances, statutes, and regulations pertaining to the collection, transportation, and disposal of refuse and recyclable materials and shall obtain such permits, licenses or other authorizations (at no additional cost to the Government) as may be required. The publications, forms, and regulations are mandatory and reflect versions that are current at the time of contract award. The government shall provide requested USCG publications, forms, and regulations to the contractor at the start of the contract period.

The contractor is responsible for obtaining all non-Coast Guard publications as needed. Supplements or

Amendments to listed publications from any organizational level may be issued during the life of the contract. The government will provide follow-on requirements to the contractor when changes occur.

The contractor shall maintain technical and reference materials and data supplied to the contractor for the entire period of performance.

The contractor shall comply with all applicable federal, state, local environmental protection and hazardous waste laws, statutes and regulations, as well as applicable U.S. Coast Guard instructions, directives, attachments and exhibits listed in the table below pertaining to the services required herein and to the conduct and qualifications of personnel in performance of this contract. The contractor shall instruct and guide its employees regarding any directives provided by the Coast Guard.

The contractor shall only utilize qualified personnel, safe products and fully operational equipment to ensure the health and safety of all in compliance with the U. S. Environmental Protection Agency (EPA) and the U. S. Occupational and Safety Hazard Administration (OSHA) standards.

The government will provide all publications listed upon request of the contractor. Supplements or amendments to listed publications may be issued during the life of the contract. The contractor shall immediately implement those changes, which result in a decrease, or no change in the contract price.

Upon completion of the contract, the contractor shall return to the government all issued publications and unused forms.

PUBLICATION TITLE

COMDTINST M11000.11B Civil Engineering Manual

COMDTINST M5100.47B Safety and Environmental Health Manual

COMDTINST M5100.29 Safety & Occupational Health Manual

COMDTINST M6000.1A Medical Manual, Chapter 7

COMDTINST 16478.1B Hazardous Waste Management

29 CFR (OSHA) Labor

29 CFR 1910.120 Occupational Safety and Health Standards

40 CFR Protection of the Environment

40 CFR 260 Hazardous Waste Management System, General

5 USC Sec 552a Privacy Act of 1974

PL 94-580 Resource Conservation and Recovery Act

Note: COMDTINST – Coast Guard Commandant Instruction

8.0 CONTRACTOR PERSONNEL REQUIREMENTS/QUALIFICATIONS.

8.1 Work Control. The contractor shall manage the total work effort associated with the services required to assure fully adequate and timely completion of these services. Such management includes, but is not limited to, planning, scheduling, report preparation, establishing and maintaining records and quality control. The contractor shall implement all necessary work control procedures to ensure timely accomplishment of work requirements and to permit tracking of work in progress. The contractor shall plan and schedule work to ensure labor and equipment are available to complete work requirements within the specified time limits and in conformance with contract terms and conditions.

8.2 Management. The contractor shall provide an adequate staff with the necessary management expertise to assure the performance of the service required. The designated contractor personnel shall effectively communicate with all Government and non-government personnel and shall have full authority to act on all contractual matters relating to the daily performance of the contract; and, to receive, accept and sign for any notices, inspection reports and all other correspondence on behalf of the contractor from the COR/Contracting Officer. This individual shall serve as the central point of contact for the Government and shall oversee the collection operations and monitor and ensure all work is performed in accordance with the PWS and shall maintain the work specification requirements, scheduling, inspections and safety standards. This individual shall be available when the contract work is in progress and shall have the ability to respond to the site to monitor work progress and for any other emergency, as required.

8.3 Personnel Qualifications. The contractor shall continuously maintain an adequate staff to ensure work is scheduled and completed in accordance with the quality standards herein. The contractor shall provide to the COR a list of all personnel proposed to work on this contract. The list shall be provided within fifteen (15) days of the contract award date and updated when changes occur. Refer to Section 6.0, Deliverables.

Contractor personnel not listed may be denied access to the Coast Guard Facility. Contractor personnel will be restricted to designated working areas. Any personnel violating this policy may lose access to the U.S.

Coast Guard facility. Contractor personnel shall have photo identification at all times while working on U.S.

Coast Guard facilities.

a. Citizenship. All contractor employees shall be citizens or legal residents of the United States.

If non-citizens are hired, proof of legal residency in the U.S. shall be provided to the Contracting Officer prior to their commencing work under this contract.

b. Language Requirement. The contractor/contractor representative must be able to read, speak, and understand English. They must be able to fulfill, completely and clearly, the reporting requirements of the contract.

c. Uniform/Appearance. Contractor personnel located onsite during normal duty hours shall present a neat appearance and shall wear distinct clothing for easy identification bearing the name of the company. The contractor shall ensure all employees wear appropriate safety equipment/clothing while collection is in progress. Any color or color combination maybe used for the uniforms except blue.

d. Communication Devices. The use of cell phones while driving (speaking or texting) on U.S.

Coast Guard Facilities is prohibited. In addition, the potential exists for distraction while personnel are eating, drinking, operating radios, etc., and these activities should only be performed when the vehicle is safely stopped.

e. Security Passes. Contractor employed personnel shall check in with the front gate upon entry and shall sign the contractor log when checking in for service pick up; and if required will be issued a day-security pass from the security office. Each employee must show a valid driver’s license and company ID card to be issued a security pass. Personnel shall not wander from the immediate area of work performance or travel routes unless authorized in advance by the COR. Each person driving a vehicle on the U.S. Coast Guard installation shall have a valid driver’s license in their possession at all times while in the vehicle on the installation.

8.4 Security Background Check. Contractor shall comply with all facility security requirements, security regulations and directives as identified herein and other security requirements cited elsewhere in the contract. The contractor shall not assign any personnel to service this contract that has been convicted of a felony or convicted of a crime in a general military court-martial. For any subsequent hiring, the security background check shall be submitted to the COR prior to employee’s assignment to perform waste collection services on BCC. The contractor’s failure to meet security background or local police checks as specified shall not constitute an excuse for nonperformance under this contract.

All Workers/Staff requiring access to Base Cape Cod must pass the Base Cape Cod National Crime

Information Center (NCIC) background check. The Contractor will use the Base Cape Cod NCIC Matrix

/List, provided in Attachment 5, to electronically provide the list of personnel to the COR within 15

Calendar days after contract award for investigation and approval. This form must be typed as hand writing will not be accepted.

8.5 Safety Practices. Refuse collection…