Attachment 5 PMP-QCP.pdf

Attachment 5, PMP/QCP Solicitation FA5613-20-Q-0031

PERFORMANCE MANAGEMENT PLAN (PMP)/QUALITYCONTROL PLAN (QCP)

for

Operational Tests, Maintenance and Repairs of Fire Suppression Systems Kaiserslautern Military Community (KMC)

Please complete the following paragraphs A., 1. through 5., and B., 1. through 3, addressing the identified areas:

COMPANY _(Name and Address)__

A. PERFORMANCE MANAGEMENT PLAN (PMP)

1. Basic operational tests, maintenance and repair services will be performed as follows:

2. The following manning structure will be utilized:

Operational Test, Maintenance & Repairs on Guardian Systems:

Operational Test, Maintenance & Repair on Ansul Systems:

Operational Test, Maintenance & Repairs on Other Systems:

3. Operational Test, Maintenance & Repair will be performed as follows:

Guardian Systems: _______________________________________________________________

Ansul Systems: ____________________________________________________________

Other Systems: ______________________________________________________

4. The following tools and equipments will be used (identify product name, manufacturer, and item use):

SEE SEPARATE LIST AT END OF THE DOCUMENT

5. All services under this requirement will be performed:

[ ] as a single contractor [ ] in a team arrangement (other than subcontractor) [ ] in a subcontracting arrangement (please identify below the percentage and describe the tasks that will be performed by subcontractor(s) by referencing the PWS paragraph).

B. QUALITY CONTROL PLAN (QCP)

1. The management structure with regard to the company’s quality control program is as follows:

2. Following procedures will be used to identify, prevent and ensure non-performance and continual repeat of defective services does not occur, in accordance with the Service Summary (SS) items:

SS#1Perform Operational Tests & Maintenance. (Low Risk Zones 1&1A):

SS# 2 Perform Repair. (Medium Risk Zone 2): ____________________________________________

SS# 3 Perform Emergency Repair. (High Risk Zones 4, & 5):

SS#4 Routine and Emergency Repair Reports (Low Risk Zone 6):

3. Other procedures as part of the quality control program are as follows:

Reference paragraph A.7.

The following tools, supplies, materials or equipment will be used (identify product name, manufacturer, and item use):

a. ____________________________________________________________________________________

b. ____________________________________________________________________________________

c. ____________________________________________________________________________________

d. ____________________________________________________________________________________