Attachment 5_Latchways Components Fall Protection.pdf

This document is a product specification and system layout guide for Latchways Fall Protection systems manufactured by Unistrut International Corporation's Fall Protection Division. The document serves as a technical reference rather than a solicitation or procurement document.

The guide presents two typical system configurations for fall protection cable systems. System 1 is designed for removable transfasteners and includes the following components: swage and clevis unit, swage slip indicators, D rings, hangers, cable, L/H threaded swage, turnbuckle body, and H-Xtenda shock absorber with right-hand thread. System 2 is configured for standard transfasteners and incorporates an entry terminal to allow workers to attach and detach from the system. The document provides detailed photographs and descriptions of key system components: the D-ring and hanger assembly supports the cable while allowing transfasteners to rotate freely for continuous protection; the swage and clevis unit creates cable terminations; swage slip indicators display gaps that signal system damage; entry terminals facilitate attachment points for standard transfasteners; turnbuckles and toggles enable cable tensioning with visual confirmation of proper pre-tension; the H-Xtenda shock absorber limits end loads during falls and shows operational status through visual indicators (perfect condition, slightly deployed, excessively deployed, or fully deployed); and transfasteners provide continuous attachment to the system with various configurations available based on application requirements.