Attachment 4 - NSN Description IPD.docx

ITEM PRODUCT DESCRIPTIONS – INDOPACOM

Section 1: Office Supplies/Packaging IPDs

7045-01-412-5317 UI: EA PAD, MOUSE

DESCRIPTION

MOUSE

INTERIOR (WRIST REST AREA)

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL DURING THE USEFUL LIFE OF THE ITEM.

7045-01-441-9576 UI: EA ADPE, WRIST REST

DESCRIPTION

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL DURING THE USEFUL LIFE OF THE ITEM.

7045-01-444-2534 UI: EA ADPE, MOUSE WRIST SUPPORT

DESCRIPTION

PRESSURE POINTS TO OFFER COMFORT TO YOUR

WRIST

MOUSE

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL DURING THE USEFUL LIFE OF THE ITEM.

7045-01-477-7792 UI: EA PAD, MOUSE

DESCRIPTION

BASE MATERIAL POLYSTYRENE

REST TO GLIDE FREELY AT THE BASE OF THE

ERGONOMIC

ENVIRONMENTAL PROTECTION STAIN RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Certification. The contractor shall certify that if polystyrene is used in the manufacture of the item, the product offered shall include a minimum range of 25 - 80 percent Postconsumer Recovered Materials in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL DURING THE USEFUL LIFE OF THE ITEM.

7110-01-587-1156 UI: EA CHAIR, STRAIGHT

GUEST CHAIR SHALL HAVE THE FOLLOWING FEATURES:

UPHOLSTERED SEAT AND BACK

POWDER COATED FRAME

FIXED ARMS WITH OPEN FRAME DESIGN

FOUR LEGS WITH GLIDES

NON-STACKABLE

BIDDING ON:

Manufacturer's Name: __________________________ Brand___________________________________ Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

Arrows or prominent marks shall be placed on all 4 sides of each shipping container to indicate the position in which the container shall be handled during shipment. One side panel shall be marked with the appropriate package certificate. The word UP shall be placed at the point of the arrows in letters at least 2 in height on all four sides. The side panels of each shipping container shall be plainly marked as follows:

TOP

THIS SIDE UP

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

In an effort to meet sustainability standards, the Federal Government seeks products meeting the following Federal Statutory Requirement:

QUALITY ASSURANCE

WORKMANSHIP: The methods of fabricating, assembling, finishing and raw materials used shall be in accordance with the best commercial practice. All parts shall be free from any defects which may adversely affect the proper operation and serviceability.

7110-01-653-5900 UI: EA WORK SURFACE, ADJUSTABLE

DESCRIPTION

FREESTANDING SIT TO STAND DESK UNIT SHALL HAVE THE FOLLOWING FEATURES:

ELECTRICALLY OPERATED HEIGHT ADJUSTABLE WORK SURFACE WITH UP/DOWN CONTROL SWITCH

WORKSURFACE PLATFORM CAPABLE OF ACCOMODATING A KEYBOARD TRAY, MOUSE, AND PAPER/NOTEBOOK

CABLE MANAGEMENT CAPABILITY

BIDDING ON:

Manufacturer's Name: __________________________ Brand___________________________________ Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf Arrows or prominent marks shall be placed on all 4 sides of each shipping container to indicate the position in which the container shall be handled during shipment. One side panel shall be marked with the appropriate package certificate. The word UP shall be placed at the point of the arrows in letters at least 2 in height on all four sides. The side panels of each shipping container shall be plainly marked as follows:

TOP

THIS SIDE UP

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

In an effort to meet sustainability standards, the Federal Government seeks products meeting the following Federal Statutory Requirement:

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

7110-01-653-7595 UI: EA WORK SURFACE, ADJUSTABLE

DESCRIPTION

ITEM NAME WORK SURFACE, ADJUSTABLE

I.A.W HUMAN ACTIVE TECHNOLOGY P/N: WNST-2-104 OR EQUAL

COMMERCIAL

DUAL MONITOR SIT TO STAND DESK UNIT SHALL HAVE THE FOLLOWING FEATURES:

WORKSURFACE PLATFORM CAPABLE OF SUPPORTING A KEYBOARD AND MOUSE

SUPPORT MOUNTING UP TO 27 INCH MONITORS

INCLUDE VESA COMPLIANT MOUNTING WITH 180 DEGREE DISPLAY ROTATION

CABLE MANAGEMENT CAPABILITY

BIDDING ON:

Manufacturer's Name: __________________________ Brand___________________________________ Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf Arrows or prominent marks shall be placed on all 4 sides of each shipping container to indicate the position in which the container shall be handled during shipment. One side panel shall be marked with the appropriate package certificate. The word UP shall be placed at the point of the arrows in letters at least 2 in height on all four sides. The side panels of each shipping container shall be plainly marked as follows:

UP

FURNITURE

FRAGILE, HANDLE WITH CARE

TOP

THIS SIDE UP

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

In an effort to meet sustainability standards, the Federal Government seeks products meeting the following Federal Statutory Requirement:

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

7490-01-459-8264 UI: BT OIL, SHREDDING MACHINE

DESCRIPTION

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7490-01-477-7790 UI: EA MACHINE, LAMINATOR

DESCRIPTION

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALiTY ASSURANCE PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7490-01-481-0403 UI: BX OIL, SHREDDER

DESCRIPTION

PACKAGING/PACKING: Eight (8) bottles of shredding oil shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for…