Attachment 4 - Drawing A-W1-1 Rev B dtd 2019-8-15.pdf

268 KB Posted

Attached to
9930--Off-Site Manufacture of W1 Blank Granite Markers for Nationwide Distribution
Solicitation number
36C78626Q0018
Issued by

About this file

Written by GovTribe AI ·

This is a technical drawing specification for a government headstone and marker produced by the National Cemetery Administration. The drawing, dated August 15, 2019, details a thin upright granite headstone with dimensions of 13 inches wide by 42 inches tall by 3 inches deep. The stone features a polished front face with inscription area limits marked, a 1/4-inch edge radius on top and side edges extending past ground level, and a saw-cut rear face for proper section and grave number placement. The specifications include a 14 1/2-inch radius ground line, 5/8-inch margins on multiple sides, and a graphic scale of 5 inches equals 1 foot for reference purposes.

The drawing is prepared by Planate Management Group (Alexandria, VA) and includes multiple views: a typical front face showing inscription placement with a cross symbol and sample inscription text, a side view indicating ground line positioning, and a rear face view for section and grave number location. The document serves as a reference standard for contractors inscribing and manufacturing government-issued headstones, with explicit instructions not to scale the drawing and not to inscribe certain reference lines. The specification sheet is part of the National Cemetery Administration's standardized headstone program overseen by the Director of Memorial Programs Service and the Chief of Operations.

View the file

Other files

File Type Posted
36C78626Q0018 0001.docx DOCX document
Attachment 6 - CDR.pdf PDF
Attachment 5 - Sample Review Form for W1 Blanks.pdf PDF
Attachment 1 - SOW - W1 Blanks.pdf PDF
Combined Synopisis-Solicitation - W1 Blanks.docx DOCX document
Attachment 7 - Past Performance Questionnaire.docx DOCX document
36C78626Q0018.docx DOCX document
Attachment 3 - Bill of Lading Template.docx DOCX document
Attachment 2 - Price-Cost Schedule - W1 Blanks.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-W1-1

1 2

Signed

Signed

G

G

DO NOT SCALE THIS DRAWING

Location

Digital File

GOVERNMENT HEADSTONES

AND MARKERS

THIN UPRIGHT GRANITE HEADSTONE

KEE

AUGUST 15, 2019

W1

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

13" X 42" X 3"

Description

6/5/2003--- SUPERSEDES DRAWING GU-33 DATED 3-22-99

1/29/2014A REMOVED TEXT CHART

8/15/2019B

SUPERSEDES DRAWING DATED 1/29/2014 INSCRIPTION

LAYOUT CENTERING AND TOLERANCE

GENERAL NOTES:

1. ITEM NUMBER IN INSCRIPTION BLOCK REFER TO INSCRIPTION SIZE AND

EMBLEMS OF BELIEF SHOWN ON DRAWING A-EM (SHEETS 1 THROUGH

5) AND A-LFN&OC (SHEETS 1 THROUGH 3).

2. EMBLEM OF BELIEF IS OPTIONAL.

3. ALL GRANITE DIMENSIONAL TOLERANCES ARE ±1/4" UNLESS

OTHERWISE SPECIFIED.

4. THE INSCRIPTION LAYOUT WILL BE CENTERED OFF OF THE CENTERLINE

AS MARKED IN SCENARIOS ABOVE. THE TOLERANCE FOR CENTERING

THE LINES OF INSCRIPTION IS LESS THAN OR EQUAL TO 3/16" ON EACH

SIDE OF THE CENTERLINE.

5. ROUNDING OF CORNERS NEED NOT EXTEND TO THE LOWEST 13

INCHES AND EACH SIDE OF THE LAST 13 INCHES MAY DISPLAY A

SMOOTHNESS SIMILAR OR EQUAL TO AN 65 GRIT FINISH OR SAW CUT

FINISH.

TYPICAL FRONT FACE OF STONE

SCALE: 5"=1'-0"

SIDE VIEW REAR FACE OF STONE

SHOWING CORRECT LOCATION

OF SECTION & GRAVE NUMBER

(SEE DWG. A-V1-2 FOR REVERSE

INSCRIPTION LOCATION if required)

3"

13"

5/8" 5/8" 5/8" 5/8"

S

E

P

L A

C E

M E

N T

D

T

A I L

S

E

D G

E

R

A D

I U

S

T

O

E

X T

E N

D

P

A S

T

G

R O

U N

D

L

E V

E L

1/4" RADIUS ±1/16"

TOP AND SIDE EDGES

(FRONT AND BACK)

C

L

C

L

C

L

C

L

ITEM L-4

EMB EMB EMB

EMBEMBEMB

EMB EMB

ITEM L1

R

A

D

ITEM L1

ITEM L1 ITEM L1

ITEM L1

ITEM L1 ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L1

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L4

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

ITEM L3

STANDARD HEADSTONE

SCALE: 2 1/2"=1'-0"

9 LINE INSCRIPTION PLACEMENT

AND DETAIL

10 LINE INSCRIPTION PLACEMENT

AND DETAIL

11 LINE INSCRIPTION PLACEMENT

AND DETAIL

11 LINE INSCRIPTION PLACEMENT

AND DETAIL

8 LINE INSCRIPTION PLACEMENT

AND DETAIL

7 LINE INSCRIPTION PLACEMENT

AND DETAIL

6 LINE INSCRIPTION PLACEMENT

AND DETAIL

7 LINE INSCRIPTION PLACEMENT

AND DETAIL

8 LINE INSCRIPTION PLACEMENT

AND DETAIL

MEMORIAL HEADSTONE

SCALE: 2 1/2"=1'-0"

GROUND LINE

LIMITS OF

INSCRIPTION

AREA

(CONTRACTOR -

DO NOT INSCRIBE

THIS LINE - FOR

REF. ONLY)

GROUND

LINE

LIMITS OF

INSCRIPTION

AREA

GRAPHIC SCALE 5" = 1'-0"

0 50.5 1 2 3

A-W1-1.DWG 24" x 36" SHEET

SEE

NOTE 1

BELOW

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

Sheets and Views
A-W1-1

File details come from the government source that posted it. Updated .