Attachment_3_-_Product_Selections.pdf

BLM Little Sheep Cabin Lima, Montana

BASIS OF DESIGN

PRODUCT SELECTION CHOICES

PREPARED FOR:

UNITED STATES BUREAU OF LAND MANAGEMENT

DENVER FEDERAL CENTER, BUILDING 50

5TH AND MAIN STREET

DENVER, CO 80225

PREPARED BY:

JACKOLA ENGINEERING & ARCHITECTURE

2250 HWY 93 S.

KALISPELL, MT 59901

ADA DOOR HARDWARE

RVARIOSS_

RVARIOSS_CUT Rev 1 - 02.24.17

AVAILABLE FINISHES: A, AK

OFFSET: 1/4” to 1-1/4” (6.4 mm - 31.8 mm) TOP PLATE LENGTH: 3-1/2” (88.9 mm) RAMP COMPONENTS LENGTH: 10” (254.0 mm) TOTAL RAMP LENGTH: 13-1/2” (342.9 mm)

# OF COMPONENTS: 3

A (Mill Finish Aluminum) AK (Mill Finish Aluminum with PemKote)

Copyright © 2017, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

Pemko Modular Ramps:

Modular Ramp Threshold Assemblies - Variables

Architectural Door Accessories

BEDROOM DOOR

11/18/21, 4:53 PM Schlage FB50ACC619 Satin Nickel Accent Single Cylinder Keyed Entry Door Lever Set and Deadbolt Combo - Handlesets.com https://www.handlesets.com/schlage-fb50-acc-accent-single-cylinder-keyed-entry-door-lever-set-and-deadbolt-combo/p4185537?uid=4185539 1/9

COVID-19 Update: Customer service wait times and delivery schedules may be impacted.

Cart - 0 itemsWhat are you shopping for? Search

Brands Schlage View All Schlage Schlage FB50-ACC Item # bci4185537

(182)—Write a Review

Schlage

Accent Single Cylinder Keyed Entry Door Lever Set and Deadbolt Combo Model: FB50ACC613 from the Accent Collection

$117.28 Finish: Oil Rubbed Bronze

Aged Bronze $101.52 1378 In Stock

Select

Antique Brass $98.33 89 In Stock

Select

Door Levers Door Knobs Deadbolts Entry Sets Electronic Locks Cabinet Hardware Pocket Door Hinges

Save Big with Coupons Free Ground Shipping over $49 Free Residential Keying Special Financing Available

Are you a Pro? My Account Orders & Returns Contact Us Help(888) 649-0865 Available Now Live Chat

Chat with an E…

EXTERIOR DOOR

https://www.handlesets.com/ https://www.handlesets.com/checkout/cart https://www.handlesets.com/ https://www.handlesets.com/door-hardware-manufacturers/c3664 https://www.handlesets.com/schlage/c3729 https://www.handlesets.com/all-schlage-door-hardware/c5412 https://www.handlesets.com/schlage/c3729 https://www.handlesets.com/collection/schlage/accent https://www.handlesets.com/door-levers/c3860 https://www.handlesets.com/door-knobs/c3870 https://www.handlesets.com/deadbolts/c3855 https://www.handlesets.com/door-entry-set/c3891 https://www.handlesets.com/keyless-door-locks/c3865 https://www.handlesets.com/cabinet-hardware/c3437 https://www.handlesets.com/pocket-door-locks/c3887 https://www.handlesets.com/door-hinges/c4234 https://www.handlesets.com/handlesets-discounts-coupons-sale/c4427 https://www.handlesets.com/creditcard https://www.handlesets.com/proaccount https://www.handlesets.com/account https://www.handlesets.com/order/status https://www.handlesets.com/help/contactus https://www.handlesets.com/help/home tel:(888) 649-0865

ADA DOOR HARDWARETILE AT WOOD STOVE

STONE LOOK BALANS™

GLAZED CERAMIC

Cover and above photos feature Balans™ Beige 12 x 24 floor tile on the floor and Beige 4 x 12 wall tile on the wall. Shower wall features Balans Beige 10 x 14 wall tile and Severino™ 2 x 10 Cestino Caldo decorative accent with Balans Beige 2 x 4 straight-joint mosaic on the shower floor.

• SOOTHING NATURALS

- Gentle elegance look of natural limestone in a modern, neutral color scheme

- The visual, which includes soft veining inherent in natural limestone, creates a comfortable and calming space

• HARMONIOUS SELECTIONS

- Comprehensive floor, wall, mosaic offering, including a 4 x 12 wall tile and 2 x 4 straight-joint mosaic

- Trim package available for a complete, finished design

Natural Harmony Escape into the gentle elegance with the look of natural limestone with Balans™. This transitional design offered in restful, neutral colors is perfect for creating a balanced, relaxing atmosphere. Balans offers the ultimate design source with its complete line of floor, wall, mosaic and trim.

BALANS™

GLAZED CERAMIC

STONE

LOOK

USAGE

SEE CHARTS FOR FULL

PRODUCT DETAILS

STONE LOOK

BALANS™

GLAZED CERAMIC

FINISHES: MATTE

GLAZED CERAMIC FLOOR TILE

2 x 4 GLAZED CERAMIC MOSAIC

WHITE BA30

WHITE BA30

BEIGE BA31

BEIGE BA31

BROWN BA33

BROWN BA33

GREY BA32

GLAZED CERAMIC WALL TILE

WHITE BA30 BEIGE BA31 BROWN BA33

SIZES:

12 x 24 Floor Tile

18 x 18 Floor Tile

12 x 12 Floor Tile

10 x 14 Wall Tile

4 x 12 Wall Tile

2 x 4 Straight-joint Mosaic

VISIT THE WHY TILE PAGE AT WWW.DALTILE.COM FOR A COMPLETE LIST OF QUALIFICATIONS AND EXCLUSIONS.

GROUT COLOR

STONE LOOK

SIZES

Thickness Sq. Ft./ Carton

Pieces/ Carton

12 x 24 Floor Tile

(11-9/16" x 23-3/8") (29.40 cm x 59.30 cm) 3/8" 15.04 8

18 x 18 Floor Tile

(17-11/16" x 17-11/16") (45.01 cm x 45.01 cm) 5/16" 17.44 8

12 x 12 Floor Tile

(11-13/16" x 11-13/16") (30.00 cm x 30.00 cm) 5/16" 15.52 16

10 x 14 Wall Tile

(9-13/16" x 13-15/16") (24.99 cm x 35.40 cm) 5/16" 14.25 15

4 x 12 Wall Tile

(4-1/4" x 12-7/8") (10.91 cm x 32.77 cm) 5/16" 10.64 28

2 x 4 Straight-joint Mosaic (Dot-mounted)

(12" x 12" Sheet) (30.48 cm x 30.48 cm Sheet) 1/4" 10.00 10

7834 C.F. Hawn Freeway, Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of Daltile® products and information, visit our website at daltile.com. ©2021 Daltile (2/21)

APPLICATIONS

Target DCOF wet Suitable

Dry & Level – Interior Floor N/A �

Wet & Level – Interior Floor ≥ 0.42 �

Shower Floors (Residential or Light Commercial) ≥ 0.42 *

Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)

≥ 0.60

Ramps & Inclines ≥ 0.65

Walls/Backsplashes N/A

Countertops N/A �

Pool Linings N/A *

A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

APPLICATION NOTES:

Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in non-freezing climates, when proper installation methods are followed.

� Wall tile not suitable for this application.

* Mosaic tile only

INSTALLATION

Grout Joint Recommendation Shade Variation

Floor: 3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.)

Wall: 10 x 14: 1/16" 4 x 12: 1/16" (When rectangular size is installed in a staggered brick-joint pattern, overlap should not exceed 33%.)

Mosaic: 1/8"

High (V3)

PERFORMANCE CHARACTERISTICS

ASTM# Floor Result

Wall Result

Mosaic Result

Water Absorption C373 < 7.0% < 20.0% < 3.0%

Breaking Strength C648 > 250 lbs 120-230 lbs > 250 lbs

Scratch Hardness MOHS 7.0 4.0-6.0 7.0

Chemical Resistance C650 Resistant Resistant Resistant

For additional information on test results, visit us at:

daltile.com/information/TestResults.

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation.

Manufactured in accordance with ANSI A137.1 standards.

Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

For additional information refer to “Factors to Consider” at: daltile.com/Factors.

Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.

POST-CONSUMER

RECYCLED MATERIALS

PRE-CONSUMER

RECYCLED MATERIALS

MADE IN THE U.S.A. REVEAL IMAGING®

All or select items within this series meet the requirements for these qualifications. For more information, visit daltile.com.

BALANS™

GLAZED CERAMIC

TRIM

Type Number Size Pieces/ Carton

Floor Bullnose P-43C9 3 x 12 22

Wall Bullnose (10" side) S-4310 3 x 10 54

Wall Bullnose Corner SN-4310 3 x 3 32

Quarter Round A-106 1 x 6 152

Quarter Round Corner UC-106 1 x 1 40

12" Jolly S-1/212J 1/2 x 11-15/16 12

DURABILITY

Floor Surface Wear Resistance

1 Residential Bathrooms 3 All Residential / Light Commercial

2 All Residential Areas 4 All Residential / Commercial

ADA DOOR HARDWAREGUTTERS

WINDOWS

GABLE END SIDING

TREX DECKING

1" Square edge

Trex Enhance® decking and Trex® Fascia are wood thermoplastic composite lumber (WTCL) boards with an integrated shell that covers the boards on the top surface and sides. The integrated shell consists of a proprietary surface formulation that produces a natural, wood-like grain pattern finish. An alternative to naturally durable hardwood lumber, Enhance Decking and Fascia are ICC-ES SAVE-certified to be a minimum of 95.4% recycled content of wood fiber and polyethylene by weight.

1" Grooved edge 8" or 12" Widths

FASCIADECKING

LOW-COST, HIGH-PERFORMANCE DECKING & FASCIA

FEATURES

DECKING BOARDS FASCIA BOARDS

1" x 6" 8" 12"

Actual Dimensions - Standard .94" x 5.5" .56" x 7.25" .56" x 11.375"

Actual Dimensions - Metric 24 mm x 140 mm 14 mm x 184 mm 14 mm x 288 mm

Available Lengths - Standard 12', 16', 20' 12' 12'

Available Lengths - Metric 365 cm, 487 cm, 609 cm 365 cm 365 cm

Grooved Edge X

Square Edge X X X

Weight per Lineal Foot 1.9 lbs 2.0 lbs 3.3 lbs

Shell: impact-, scratch-and fade-resistant

Core: 95% recycled materials

TEST TEST METHOD VALUE

Flame Spread ASTM E 84 125

Thermal Expansion ASTM D 1037 1.9 x 10-5 in/in/degreeF

Moisture Absorption ASTM D 1037 < 1%

Screw Withdrawal ASTM D1761 558 lbs/in

Fungus Resistance ASTM D1413 Rating – no decay

Termite Resistance AWPAE1-72 Rating = 9.6

ULTIMATE (TYPICAL) VALUES* DESIGN VALUES

Compression Parallel ASTM D198 1588 psi 540 psi

Compression Perpendicular ASTM D143 1437 psi 540 psi

Bending Strength ASTM D198 3280 psi 500 psi

Shear Strength ASTM D143 1761 psi 360 psi

Modulus of Elasticity ASTM D4761 412,000 psi 200,000 psi

Modulus of Rupture ASTM D4716 3280 psi 500 psi

PHYSICAL & MECHANICAL PROPERTIES

*Ultimate strength values are not meant for design analysis. Design values are for temperatures up to 125°F (52°C).

© 2020 Trex Company, Inc. All rights reserved. Trex®, the Trex logo, Trex Enhance®, Trex® Fascia and Trex Hideaway® are either federally registered trademarks, trademarks or trade dress of Trex Company, Inc., Winchester, Virginia or its licensees.1120 NDLTTCHDOC2020

Rocky Harbor Beach Dune

Toasted Sand Saddle

Coastal Bluff

Foggy Wharf Clam Shell

COLORS FASTENERS

Naturals (multi-tonal) Basics (monochromatic)

Color-matched composite deck screw

Other Approved Fasteners

Uncoated stainless steel fascia screw

Color-coordinated fascia screw

For a full list of approved fasteners, download our Installation Guide at trex.com/literature

Trex Hideaway® Hidden Fastening System

Self-gapping, glass-filled nylon fastener with 304 grade stainless steel, sharp point screw for wood framing

BUILDING A CEILING FAN

GABLE END VENTS

ROOF PANELS

1. 5 Degree Overbend: Ensures tight overlap between panels.

2. Anti-Siphon Groove: Creates an internal air gap at panel overlap to help prevent water intrusion.

3. Underlayment: High Temp Ice & Water shown. For use at eaves and valleys.

4. Substrate: Plywood substrate material shown. Can be installed over open framing with max span width of 60".

Bridger Steel Inc. | www.BridgerSteel.com | 1.833.STEEL.US

Purlin bearing rib

Panel Overlap Detail

36” Coverage

12”

9”

1”

¾” 3½”

Anti-Siphon Groove

5° Over Bend

1¼”

1⅜”

Wall Coverage

Version 5.1, 4/2021* Grade 80

Panel Gauges

Fastener Options

Panel Length

Rib Height

Roof Slope

36”

Roof Coverage 36”

Exposed

1.25” at 12” Centers

Impact Rating UL 2218

Wind Uplift Rating

Warranty Based on Paint System

For more information 1.833.STEEL.US

24**, 26*

Minimum 1:12 or Greater with Mastic

ASTM E1592

** Grade 50

3’ to 43’+ Longer lengths available. Contact a Product Specialist.

Vented/Non-Vented Ridge Cap Hip Ridge W Valley Transition - High to Low Transition - Low to High

Open Prow Gable Closed Prow Gable 4” Mini Gable 6” Gable Snowbreak

4” Eave 6” Eave Style D Eave - 2” & 4” 4” Mini Top Cap 6” Top Cap

J Trim Double J Trim F & J Trim Head Trim Side Wall

End Wall Outside Corner Inside Corner Door Cap Double Base Drip

Base Drip Broom Base Wainscot Fascia

Additional Trim Profiles Available

By Request

* Color On Both Sides

RANGE HOOD

RETAINING WALL ON WEST SIDE

OF BUILDING A

Cedar Rapids . Coralville . Eldridge

KingsMaterial.com

© 2017 King’s Material, Inc.

All Rights Reserved

YOUR MASONRY LANDSCAPE SOURCEYOUR MASONRY LANDSCAPE SOURCE

KEYSTONE COMPAC III STRAIGHTFACE

GraniteGray Harvest Taupe Walnut

Due to inherent characteristics of concrete, color may vary slightly. No guarantee of color shade is made or implied.

Classic Keystone, Natural Appeal

FEATURES

• High Strength Pin Connection System

• Structural Integrity

• Ease of Installation

• Aesthetics

• Design Versatility

HARD-SPLIT CORNER

Weight: 72# ea

1 Unit = 1 sq ft

Weight: 85# ea

1 Unit = 1 sq ft

COMPAC III HARD-SPLIT

KEYSTONE UNITS

Keystone Compac units are made of high-strength, low absorption concrete for long lasting structures. All structural units are interconnected using high strength fiberglass pins for a strong shear connection. The connecting pins allow for ease of unit alignment and a secure, positive mechanical connection with soil reinforcement materials. Keystone's patented pin system is the critical difference providing the safety and security of a structural retaining wall solution.

18" 18"12" 9"

8" 8"

1 cap = 1.3 ln ft

10" HARD-SPLIT CAP

9 ⅝"15 ⅝"

4"

Weight: 34# ea Face size: 4" x 15 ⅝"

Cedar Rapids . Coralville . Eldridge

KingsMaterial.com

© 2017 King’s Material, Inc.

All Rights Reserved

YOUR MASONRY LANDSCAPE SOURCEYOUR MASONRY LANDSCAPE SOURCE

KEYSTONE COMPAC III STRAIGHTFACE

INSTALLATION INSTRUCTIONS

1. Prepare the Base Leveling Pad Excavate the base trench to the designed width and depth. Start the leveling pad at the lowest elevation along the wall alignment. Step up in 8” (200mm) increments with the base as required at elevation change in the foundation. Level the prepared base with maximum lifts of 6”

(150mm) of wellcompacted granular fill (gravel, road base, or

½” to ¾” [10 − 20mm] crushed stone).Compact to 95% Standard

Proctor or greater. Do not use

PEA GRAVEL or SAND for leveling pad.

STEP ONE

4. Install Fill & Compaction Provide ½”-¾” (10 − 20mm) clean crushed stone drainage fill behind the units to a minimum distance behind the tail of one foot (300mm). Fill all open spaces between units and open cavities/cores with the same drainage material. Proceed to place backfill in maximum 6 -

8” (150 − 200mm) layers and compact to 95% Standard Proctor with the appropriate compaction equipment.

STEP FOUR

2. Install the Base Course Place the first course of Keystone units end to end (with face of wall corners touching) on the prepared base. The receiving pin hole should face upward, as shown. Make sure each unit is level. Leveling the first course is critical for accurate and acceptable results. Keystone recommends minimum embedment depth for below grade placement of Keystone units on a ratio of 1”

(25mm) below grade for each

8” (200mm) of wall height above grade or one unit, whichever is greater.

STEP TWO

5. Install Additional Courses Place the next course of Keystone units over the fiberglass pins, fitting the pins into the triangular shaped receiving hole in the units above.

Push the units toward the face of the wall until they make full contact with the pins. Continue backfilling and building to desired top elevation.

STEP FIVE

3. Insert the Fiberglass Pins Place the straight fiberglass pins into the holes of each Keystone unit as required. Once placed, the pins create an automatic setback for the additional courses. Place pins in the front holes for near vertical (⅛” or [3mm]) setback and the rear holes for 1⅛”

(29mm) setback per course.

STEP THREE

6. Capping the Wall Complete your wall with the appropriate Keystone capping units. With units dry and clean, use exterior construction grade adhesive on the top surface of the last course before applying cap units. Backfill and compact to finish grade.

STEP SIX

RANGE HOOD

SP

EC

IF

IC

AT

IO

N S

HE

ET

EW

S

ER

IE

S

Chimney

Broan-NuTone LLC | 926 West State Street, Hartford, WI 53027 | 1 888-336-3948 | www.broan.com

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

HK0262

FROM 26½”

TO 43½”

115⁄8”

297⁄8”, 357⁄8”

2³⁄16” 57/16”

20”

10¾”

EW54d170710

FEATURES

Control type 3-speed Capacitive Touch Delay off no Filter Clean Reminder yes

Heat Sentry™ no

ADA Capable no Lighting 2-level halogen (included) Grease Filters Micro Mesh (Qty. 2) Installation Hardware Included ENERGY STAR® no

Duct Size Vertical 6” round or 3¼” x 10” Horizontal 3¼” x 10”

AC INPUT

120V, 60 Hz - 4.8 AMPS

OPTIONAL ACCESSORIES

Flue extension for 10-ft ceilings FXE54BLS

Air flow reducer for 6” round adapter ARP6

Air flow reducer for 3¼” x 10” ARP310

MOUNTING HEIGHT

24-in. to 30-in. from cooktop to bottom of hood

LIMITED WARRANTY

1-year See installation manual for full warranty text.

FOR INDOOR USE ONLY

SIZE BLACK STAINLESS GREASE FILTERS

(replacement)

30-in. EW5430BLS 99010355 36-in. EW5436BLS 99010355

A sleek, low-profile design enhanced by a dazzling new finish. Create a signature look and focal point in any personalized kitchen with this stunning black stainless chimney hood.

SP

EC

IF

IC

AT

IO

N S

HE

ET

EW

S

ER

IE

S

Broan-NuTone LLC | 926 West State Street, Hartford, WI 53027 | 1 888-336-3948 | www.broan.com

PERFORMANCE

Duct Orientation Size Damper Sones CFM @ 0.1 Ps

Working Speed High speed Working

Speed High speed

Vertical 3¼-in. x 10-in. Included 1.4 11.5 200 550 Vertical 6-in. round Included 1.5 12 180 500

Horizontal 3¼-in. x 10-in. Included 1.3 10.5 180 500

0 100 200 300 400 500 600 0.0

0.4

0.8

1.2

1.6

2.0

2.4

2.8

3.2

Vertical 3.25 in. x 10 in.

Horizontal

Vertical 6 in. Round

Airflow (CFM)

S ta tic P re ss ur e

(in .w

.g

Airflow Performance at High Speed

HG0089

0 20 40 60 80 100 120 140 160 180 200 220 0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0 Vertical 6 in. Round

Vertical 3.25 in. x 10 in.

Horizontal

Airflow (CFM)

Airflow Performance at Working Speed

S ta tic P re ss ur e

(in .w

.g

HG0008

PAINT

101.082

Emerald® Designer Edition™

Interior Latex Satin K27 Series

CHARACTERISTICS

Emerald® Designer Edition™ is our finest interior architectural coating. A cleanable finish that offers excellent hide, washability, resistance to burnishing and water spotting.

Anti-Microbial properties*

Color: Most Colors To optimize hide and color development, always use the recommended P-Shade primer Coverage: 350 - 400 sq.ft. per gallon

@ 4 mils wet; 1.6 mils dry

Drying Time, @ 77°F, 50% RH:

Touch: 1 Hour Recoat: 4 Hours

Drying and recoat times are temperature, humidity, and film thickness dependent

Finish: 15-20 units @ 85°

Tinting with CCE only:

Base: oz per gallon:

Strength:

UltraWhite 0-7 SherColor Extra White 0-7 SherColor Deep Base 4-14 SherColor Ultradeep Base 10-20 SherColor

Extra White K27W00051 (may vary by color)

V.O.C. (less exempt solvents):

less than 50 grams per litre; 0.42 lbs. per gallon

As per 40 CFR 59.406

Volume Solids: 41 ± 2% Weight Solids: 58 ± 2% Weight per Gallon: 11.40 lbs Flash Point: N.A.

Vehicle Type: Styrene acrylic Shelf Life: 36 months unopened

*Anti-microbial This product contains agents which inhibit the growth of mold and mildew on the surface of this paint film.

COMPLIANCE

As of 02/02/2021, Complies with:

OTC Yes OTC Phase II Yes S.C.A.Q.M.D. Yes CARB Yes CARB SCM 2007 Yes CARB SCM 2020 Yes Canada Yes LEED® v4 & v4.1 Emissions No LEED® v4 & v4.1 V.O.C. Yes EPD-NSF® Certified No MIR-Product Lens Certified No MPI No

APPLICATION

Apply at temperatures above 50°F.

No reduction needed.

Brush:

Use a nylon-polyester brush.

Roller:

For best final appearance when rolling, finish off in one direction, especially for dark colors.

Use a high quality polyester roller cover. For specific brushes and rollers, please refer to our Brush and Roller Guide on sherwin-williams.com

Spray—Airless Pressure 2000 p.s.i.

Tip .017-.021 inch

APPLICATION TIPS

Make sure product is completely agitated (mechanically or manually) before use.

Priming and application of two coats at the recommended film thickness when application to new surfaces is a factor.

When repainting involves a drastic color change, or coating over heavily stained areas, a coat of primer will improve the hiding performance of the topcoat color.

For best final appearance the use of quality brush and rollers is required.

SPECIFICATIONS

Emerald Designer Edition can be used directly over existing coatings, bare drywall, or plaster (cured with a pH of less than 9) Drywall:

Self-prime using 2 coats of Emerald Designer Edition or 1 coat Premium Wall and Wood Primer 2 coats Emerald Designer Edition

Masonry / Block: (can be filled to provide a smooth surface or primed if it is a high pH substrate) 1 coat Loxon Acrylic Block Surfacer or

1 coat Loxon Concrete & Masonry Primer 2 coats Emerald Designer Edition Plaster:

Self-prime using 2 coats of Emerald Designer Edition or 1 coat Loxon Concrete & Masonry Primer 2 coats Emerald Designer Edition

Previously Painted:

1-2 coats Emerald Designer Edition

Wood:

1 coat Premium Wall and Wood Primer 2 coats Emerald Designer Edition If the wood has bleeding (such as tannin or knot-holes), prime with Multi-Purpose Primer.

Other primers may be appropriate.

02/2021 www.sherwin-williams.com continued on back

Emerald® Designer Edition™

Interior Latex Satin

SURFACE PREPARATION

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer-sealer. Recognize that any surface preparation short of total removal of the old coating may compromise the service length of the system.

Caulking:

Gaps between walls, ceilings, crown moldings, and other interior trim can be filled with the appropriate caulk after priming the surface.

Drywall:

Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.

Masonry, Concrete, Cement, Block:

All new surfaces must be cured according to the supplier’s recommendations—usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer.

SURFACE PREPARATION

Mildew:

Prior to attempting to remove mildew, it is always recommended to test any cleaner on a small, inconspicuous area prior to use. Bleach and bleaching type cleaners may damage or discolor existing paint films. Bleach alternative cleaning solutions may be advised.

Mildew may be removed before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with water and allow the surface to dry before painting. Wear protective eyewear, waterproof gloves, and protective clothing. Quickly wash off any of the mixture that comes in contact with your skin. Do not add detergents or ammonia to the bleach-water solution.

Plaster:

Bare plaster must be cured and hard. Textured, soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry.

Wood:

Sand any exposed wood to a fresh surface.

Patch all holes and imperfections with a wood filler or putty and sand smooth.

CAUTIONS

For interior use only.

Protect from freezing.

Non-photochemically reactive.

Before using, carefully read CAUTIONS on label Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water.

Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO

NOT TAKE INTERNALLY. KEEP OUT OF THE REACH

OF CHILDREN.

HOTW 02/02/2021 K27W00051 04 00

FRC,SP

CLEANUP INFORMATION

Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with compliant cleanup solvent to prevent rusting of the equipment. Follow manufacturer’s safety recommendations when using solvents.

The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication.

Consult your Sherwin-Williams representative or visit www.paintdocs.com to obtain the most current version of the PDS and/or an SDS.

VINYL PLANK FLOORING

Local Reserve PRODUCT SPECIFICATIONS

Packaging

Performance Testing

*Results are based on a laboratory test and used for comparative purposes. Real life load limit may vary.

Test Reports may be included or listed by the manufacturing/inventory style number as opposed to the noted selling style number.

COLLECTION Local Reserve

STYLE NUMBER I592V

CONSTRUCTION Multilayer SPC

WEAR LAYER

THICKNESS

20 mil / 0.02 inches (0.508 mm)

OVERALL THICKNESS 0.157 inches (4 mm) EDGE PROFILE Micro-Bevel

REFERENCE

SPECIFICATION ASTM F3261

FINISH ExoGuard+™ INSTALLATION TYPE Tongue and Groove INSTALLATION Glue Down

RECOMMENDED

ADHESIVE LG4100 4G or 4151

US Units Metric Units

PLANK SIZE 7 inches W x 48 inches L 17.8 cm W x 121.9 cm L AREA /BOX 27.96 sq ft 2.6 sq m WEIGHT /BOX 42.24 lbs 19.2 kg

STATIC LOAD / ASTM F970 Passes (Modi�ed), *2500 lbs RESIDUAL INDENTATION / ASTM F1914 Passes RESISTANCE TO CHEMICALS / ASTM F925 Passes RADIANT PANEL / ASTM E648 Passes, Class I SMOKE DENSITY / ASTM E662 Passes SLIP RESISTANCE / ASTM D2047 ≥0.5, meets the recommended static coef�cient of friction for

ADA walking surfaces REPETITIVE SCRATCH TEST No to Slight Change

PA TC R A F T. C O M / @PA TC R A F TF L O O R S / 8 0 0 . 2 4 1 . 4 0 1 4

© 2021 Shaw Industries Group, Inc., a Berkshire Hathaway Company

For reference purposes only if printed or downloaded.

Proposed Colors:

Cashew 00105 Jute 02001 https://pdmsview.shawinc.com/viewer/test-result/4fe59ac7-f5fe-4e31-9673-da9377ba3866 https://pdmsview.shawinc.com/viewer/test-result/30595a48-728e-4229-828e-bd1d30eafdae https://pdmsview.shawinc.com/viewer/test-result/ef3a99d6-ad0c-4fc9-87ec-c7285c47b1e3

Local Reserve Warranty

Please visit patcraft.com for the most current warranty information.

Installation Methods

Brick Stagger

Environmental

15 Year Limited Commercial.

Commercial Limited Underbed Bond Shaw 4100, Shaw 4151.

Installation Guidelines Maintenance Guidelines

FLOORSCORE® Certi�ed

PA TC R A F T. C O M / @PA TC R A F TF L O O R S / 8 0 0 . 2 4 1 . 4 0 1 4

© 2021 Shaw Industries Group, Inc., a Berkshire Hathaway Company

For reference purposes only if printed or downloaded.

https://patcraft.com/ https://qmsview.shawinc.com/viewer/doc/9040 https://pdmsview.shawinc.com/viewer/book/7988 https://pdmsview.shawinc.com/viewer/doc/8909 https://qmsview.shawinc.com/viewer/doc/773

CASHEW

OPTION 1

BUILDING A WOOD STOVE

9/2/2021 High Efficiency Wood Stove | Black Stag II | Drolet https://www.drolet.ca/en/products/stoves/black-stag-ii-wood-stove/#fiche-technique 1/4

Specs/Manual

DB03411

BLACK STAG II WOOD STOVE

Heating area 900 - 2,300 Ft

Size 24 1/4" W X 32 1/4" D X 32 3/4" H

Maximum log length 20"

Average particulate emissions rate 0.95 g/h

Maximum recommended heating area by climate zone Consult our map

From USD $1,499.00 MSRP

(1)

Online retailer(s):

https://www.myfireplaceproducts.com

Black Stag II stove install & owner's manual (PDF - 6.1 Mo)

Black Stag II stove dimensions (PDF - 0.1 Mo)

Appliance performance

Fuel type Dry cordwood (16" recommended)

Recommended heating area-ft² 900 - 2,300

Overall firebox volume-ft³ 3.3

EPA loading volume-ft³ 2.67

Maximum heat output-dry cordwood 90,000 BTU/h (26.4 kW)

Overall heat output rate < 15,841 BTU/h (4.64 kW) to 57,041 BTU/h (16.72 kW)

(2)

(3)

(3) (4) https://sbiweb.blob.core.windows.net/media/5389/superficie-de-chauffage_drolet_2021.pdf https://www.myfireplaceproducts.com/ https://sbiweb.blob.core.windows.net/media/5889/46140a_2020_11_25.pdf https://sbiweb.blob.core.windows.net/media/5619/db03411-black-stag-ii.pdf https://www.drolet.ca/en/products/stoves/black-stag-ii-wood-stove/#fiche-technique 2/4

Average overall efficiency (EPA cribs/Douglas fir) N.A. (HHV) N.A. (LHV)

Average overall efficiency (dry cordwood) 71.1 % (HHV) 76.6 % (LHV)

Optimum overall efficiency 78 %

Optimum heat transfer efficiency 74 %

Average particulate emissions rate 0.95 g/h

Average CO 61.3 g/h

This appliance is officially tested and certified by an independent agency.

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to

120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

As measured per CSA B415.1-10 stack loss method.

Higher Heating Value of the fuel.

Lower Heating Value of the fuel.

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

Optimum overall efficiency at a specific burn rate (LHV).

The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

Carbon monoxyde.

General features

Combustion technology Non-catalytic

Maximum burn time 10 h

High-efficiency certified appliance Yes, EPA 2020 approved

Maximum log length 20"

Log positioning Loading over depth

Chimney diameter 6"

Flue outlet diameter 6"

Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)

Minimum chimney height (feet) 15'

Baffle type High quality vermiculite

Approved for an alcove installation Yes

Approved for a mobile home installation Yes, with fresh air intake

Shipping Weight 407 lb

Door type Full cast iron

Overall dimension (Height) 32 3/4"

Overall dimension (Width) 24 1/4"

(4) (5) (6)

(4) (5) (6)

(7) (8)

(9)

(1)

(10)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10) https://www.drolet.ca/en/products/stoves/black-stag-ii-wood-stove/#fiche-technique 3/4

Overall dimension (Depth) 32 1/4"

Door opening – dimension (Height) 12"

Door opening - dimension (Width) 16"

Firebox – dimension (Height) 14 1/8"

Firebox – dimension (Width) 19"

Firebox – dimension (Depth) 21"

Firebox lined with refractory bricks for better heat distribution Yes

Stainless-steel secondary-air system improving gas combustion Yes

Model Legs

Steel thickness – body 3/16"

Steel thickness – top 5/16"

USA standard (emissions) EPA

Canadian Standard (emissions) CSA B415.1-10

USA standard (safety) UL 1482, UL 737

Canadian standard (safety) ULC S627

Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)

Warranty Limited lifetime

Minimum clearances to combustibles*

(Data expressed in inches. 1 inch = 25.4 mm)

Canada United-States

Single wall pipe Double wall pipe Single wall pipe Double wall pipe

Clearance – back wall 14 1/2" 7 1/2" 14 1/2" 7 1/2"

Clearance - corner 12" 10" 12" 10"

Clearance – side wall 20" 20" 20" 20"

Clearance – top (measured from the platform on which the appliance is installed)** 84" 84" 84" 84"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

C U S T O M E R S E R V I C E possiblepurchase@sbi-international.com

1-877-356-6663

Monday to Friday

8 h to 12 h - 13 h to 17 h (EST)

Find a dealer

USA Leaflet

Find an installer

EPA 2020

mailto:achateventuel@sbi-international.com tel:18773566663 https://www.drolet.ca/en/where-to-buy/ https://sbiweb.blob.core.windows.net/media/5893/pub038_pad_drolet-usa_2020_web.pdf https://www.drolet.ca/en/installer/ https://www.drolet.ca/en/epa2020/ https://www.drolet.ca/en/products/stoves/black-stag-ii-wood-stove/#fiche-technique 4/4

D E A L E R S E R V I C E sac@sbi-international.com

1-844-344-3071

Monday - Friday: 8:00 a.m. to

12:00 - 1:00 to 5:00 p.m. (EST)

T E C H N I C A L S U P P O R T

1-877-356-6663

Monday - Friday

8 a.m. to 12 p.m. - 1 p.m. to 5 p.m. (EST)

Contact technical support

Replacement parts

User and installation manuals

FAQ

mailto:sac@sbi-international.com tel:18443443071 https://www.drolet.ca/en/contact-us/technical-support/ https://www.drolet.ca/en/parts/ https://www.drolet.ca/en/owners-manual/ https://www.drolet.ca/en/faq/

24 1/4" 616mm

12 1/8" 308mm

7 1/2" 191mm

O 6" 153mm

24 1/4" 616mm

11 5/8" 294mm

14 5/8" 372mm

/4 m m

24" 610mm

/8 m m

/4 m m

/8 m m

26 7/8" 682mm

7 1/2" 191mm

31 1/4" 795mm

BLACKSTAG II (DB03411)

PATTES / LEGS

© 2020, FABRICANT DE POÊLES INTERNATIONAL INC. TOUS DROITS

RÉSERVÉS / ALL RIGHTS RESERVED

21 7/8" 556mm

23 1/8" 588mm

26" 662mm

/8 m m

/8 m m

32 1/4" 819mm

19" 481mm

BLACKSTAG II (DB03411)

CHAMBRE À COMBUSTION / COMBUSTION CHAMBER

© 2020, FABRICANT DE POÊLES INTERNATIONAL INC. TOUS DROITS

RÉSERVÉS / ALL RIGHTS RESERVED

5/16" 8mm3/16"

5mm

21" 535mm

/8 m m

/4 m m

16" 406mm

BUILDING A REFRIGERATOR

18 cu. ft. Top-Freezer Refrigerator

WRT518SZF

Key Features & Benefits

Capacity Total Capacity 18 cu. ft.

Refrigerator Capacity 14 cu. ft.

Freezer Capacity 4 cu. ft.

General Features & Properties Freezer Temperature Control

EZ Connect Ice Maker Compatible

Frameless Glass Shelves

Manual Humidity Controlled Crispers

Adjustable Door Bins

Pocket Handles

Electrical Details Amps 6.5

Volts 120

Technical Details Refrigerator Type Top-Freezer

Number of Doors 2

Number of Interior Refrigerator Shelves 2

Number of Refrigerator Door Bins

2 Fixed, 4 Adjustable

Number of Interior Freezer Shelves 1

Number of Freezer Door Bins 2 Fixed

Lighting Type LED

Ice Maker Optional

Ice Maker Location Freezer

Dispenser Type N/A

Dimensions

Product Dimensions (H x W x D)

67-7/16" x 28" x 31-5/8"

Depth with Door Open 90° 57"

Cutout Dimensions

Allow extra 1/2" on sides and top Allow extra 1" on rear

Reference Material Dimension Guide

Use & Care Guide

Energy Guide

Warranty

Monochromatic Stainless Steel

WRT518SZFM

Also available in:

White WRT518SZFW

Black WRT518SZFB

Fingerprint- Resistant Metallic Steel

WRT518SZFG

Flexi-Slide™ Bin Make space for tall items with the bin that quickly and easily moves side to side.

LED Interior Lighting Keep food looking as good as it tastes.

Electronic Temperature Control Choose the ideal temperature for whatever foods you’re storing with up-front controls.

NOTE: Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

®/™ © 2020. All rights reserved. Printed in the U.S.A. D200052XXC. WRT518SZFSPECSHEETV01.

http://access.whirlpool.com/mr/getMediaType.do?mediaType=Dimension Guide&sku=WRT518SZFM&language=EN http://access.whirlpool.com/mr/getMediaType.do?mediaType=Use and Care&sku=WRT518SZFM&language=EN http://access.whirlpool.com/mr/getMediaType.do?mediaType=Energy Guide&sku=WRT518SZFM&language=EN http://access.whirlpool.com/mr/getMediaType.do?mediaType=Warranty&sku=WRT518SZFM&language=EN

ELECTRICAL GENERATOR AND ASSOCIATED

INFRASTRUCTURE EQUIPMENT

Model: 12RES LPG/Natural Gas

Standard Features D ADC-RES Advanced Digital Control d Designed for today’s most sophisticated electronics d Electronic speed control responds quickly to varying household demand d Digital voltage regulation protects your sensitive electronics from harmonic distortion and unstable power quality d LED display shows system status and setup information

D Engine Features d Kohler Command PROr OHV engine with hydraulic valve lifters for reliable performance without routine valve adjustment or lengthy break-in requirements d Digital Spark Advance Ignition (DSAI) optimizes engine performance for natural gas and LPG fuels d Simple field conversion between natural gas and LPG fuels while maintaining emission certification

D Designed for Easy Installation d Polymer base eliminates the need for a concrete mounting pad, reducing installation time and cost d Fuel and electrical connections through the enclosure wall eliminate the need for stub-ups through the bottom d Load connection terminal block allows easy field wiring d Designed for outdoor installation only

D Certifications d Meets emission regulations for U.S. Environmental Protection Agency (EPA) with both natural gas and LPG. Note: CARB does not regulate emergency standby generators outputting less than 50 HP. Only the EPA standards apply.

d UL 2200/cUL listed (60 Hz models) d CSA certification available (60 Hz models) d Accepted by the Massachusetts Board of Registration of Plumbers and Gas Fitters

D Warranty d 5-year /2000 hour limited warranty for on-grid (standby) applications in locations served by a reliable utility source d 18 month/1000 hour limited warranty for off-grid (non-standby) applications

The Kohlerr Advantage D The Smart Choice Known for its reliability, the Kohler 12 kW generator has been ranked highest for value in leading consumer publications.

D Powerful Exclusive Powerboostt technology allows the Kohler 12 kW generator to start and run a typical 4 ton (48,000 BTU) central air conditioner, while still running other home appliances and electronics. *

D Clean Power for Sensitive Electronics Protects sophisticated electronics with clean, stable power that exceeds strict utility requirements and IEEE standards for total harmonic distortion (THD).

D Fast Response Kohler generator sets restore power in as little as 10 seconds.

D Quiet Operation Kohler residential generators provide quiet, neighborhood-friendly performance.

D Premium Five-Year or 2000 Hour Limited Warranty

G4-248 (12RES) 10/20b

Generator Ratings

Model Voltage Phase Hz Alternator

Standby Ratings Natural Gas LPG kW/kVA Amps kW/kVA Amps

12RES

120/240 1 60 2F4 10.4/10.4 43 12.0/12.0 50

115/230 1 50 2F4 9.3/9.3 40 10.5/10.5 46 RATINGS: Standby ratings apply to installations served by a reliable utility source. All single-phase units are rated at 1.0 power factor. The standby rating is applicable to variable loadswith an average load factor of 80% for the duration of the power outage. No overload capacity is specified at this rating. Ratings are in accordance with ISO- 3046/1, BS5514, AS2789, and DIN 6271. GENERAL GUIDELINES FOR DERATING: ALTITUDE: Derate 4% per 305 m (1000 ft.) elevation above 153 m (500 ft.). TEMPERATURE: Derate 1.5% per 5.5_C (10_F) temperature increase above 16_C (60_F). Availability is subject to change without notice. The generator set manufacturer reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. Contact your local Kohler Co. generator distributor for availability.

* Check the appliance manufacturer’s specifications for actual power requirements. Consult a Kohlerr Power Systems professional to calculate your exact residential power system requirements.

G4-248 (12RES) 10/20b

Application Data Engine Engine Specifications 60 Hz 50 Hz Manufacturer Kohler Engine: model, type CH740 4-Cycle Cylinder arrangement V-2 Displacement, L (cu. in.) 0.725 (44) Bore and stroke, mm (in.) 83 x 67 (3.27 x 2.64) Compression ratio 9.0:1 Main bearings: quantity, type 2, Parent Material Rated rpm 3600 3000 Max. engine power at rated rpm, kW (HP)

LPG 17.6 (23.6) 15.8 (21.2)

Natural gas 15.3 (20.5) 13.8 (18.5)

Cylinder head material Aluminum Valve material Steel/Stelliter Piston type and material Aluminum Alloy Crankshaft material Heat Treated, Ductile Iron Governor: type Electronic Frequency regulation, no load to full load Isochronous Frequency regulation, steady state 0.5% Air cleaner type Dry

Engine Electrical Engine Electrical System Ignition system Electronic, DSAM Starter motor rated voltage (DC) 12 Battery charger, ampere rating 6 Battery (purchased separately):

Ground Negative Volts (DC) 12 Battery quantity 1 Recommended cold cranking amps (CCA) rating for - 18_C (0_F) 525 BCI group size 26

Exhaust Exhaust System 60 Hz 50 Hz Exhaust flow at rated kW, m3/min. (cfm) 3.8 (135) 3.2 (113) Exhaust temperature at rated kW, dry exhaust, _C (_F) 760 (1400)

Lubrication Lubricating System Type Full Pressure Oil capacity (with filter), L (qt.) 1.9 (2.0) Oil filter: quantity, type 1, Cartridge Oil cooler Integral

Operation Requirements Cooling Air 60 Hz 50 Hz Total inlet air, m3/min. (cfm) 28.0 (990) 23.4 (825) Cooling air, m3/min. (cfm) 26.9 (950) 22.4 (790) Combustion air, m3/min. (cfm) 1.1 (39.2) 0.9 (32.6)

Fuel Requirements Fuel System

Fuel types Natural Gas or LPG

Fuel supply inlet 1/2 NPT

Fuel supply pressure, kPa (in. H2O):

Natural gas 0.9- 2.7 (3.5-11)

LPG 1.7- 2.7 (7-11)

Fuel Composition Limits * Nat. Gas LPG Methane, % by volume (minimum) 90 min. — Ethane, % by volume (maximum) 4.0 max. — Propane, % by volume 1.0 max. 85 min.

Propene, % by volume (maximum) 0.1 max. 5.0 max.

C4 and higher, % by volume 0.3 max. 2.5 max.

Sulfur, ppm mass (maximum) 25 max.

Lower heating value, MJ/m3 (Btu/ft3), (minimum) 33.2 (890) 84.2 (2260)

* Contact your local distributor for suitability and rating derates based on fuel compositions outside these limits.

Minimum Gas Pipe Size Recommendation, in. NPT

Pipe Length, m (ft.)

Natural Gas (193,000 Btu/hr.)

LPG

(203,000 Btu/hr.)

8 (25) 3/4 3/4

15 (50) 1 3/4

30(100) 1 1

46(150) 1 1/4 1

61(200) 1 1/4 1

Fuel Consumption at % rated load

% Load 60 Hz 50 Hz

Natural Gas, m3/hr. (cfh)

100% 5.4 (193) 4.8 (173)

75% 4.7 (163) 4.2 (148)

50% 3.5 (124) 3.1 (108)

25% 2.6 (93) 2.4 (84)

LPG, m3/hr. (cfh)

100% 2.3 (81) 2.1 (74)

75% 2.1 (75) 1.9 (68)

50% 1.8 (60) 1.5 (53)

25% 1.2 (45) 1.1 (40)

LPG, kg/hr. (lb./hr.)

100% 4.3 (9.4) 3.9 (8.6)

75% 3.9 (8.7) 3.6 (7.9)

50% 3.4 (7.0) 2.8 (6.2)

25% 2.2 (5.2) 2.1 (4.7)

LPG conversion factors:

8.58 ft.3 = 1 lb.

0.535 m3 = 1 kg

36.39 ft.3 = 1 gal.

Nominal fuel rating:

Natural gas: 37 MJ/m3 (1000 Btu/ft.3) LPG: 93 MJ/m3 (2500 Btu/ft.3)

Alternator

Alternator Features

D Compliance with NEMA, IEEE, and ANSI standards for temperature rise

D Self-ventilated and dripproof construction

D Windings are vacuum-impregnated with epoxy varnish for dependability and long life

D Superior voltage waveform and minimum harmonic distortion from skewed alternator construction

D Digital voltage regulator with 1.5% no-load to full-load RMS regulation

D Rotating-field alternator with static exciter for excellent load response

D Skewed generator construction produces a smooth AC waveform

Alternator Specifications

Specifications PowerBoostt Generator

1-Phase

Manufacturer Kohler

Output reconnectable 120/240

Type 2-Pole, Rotating Field

Leads, quantity 4

Voltage regulator Digital

Insulation: NEMA MG1-1.66

Material Class H

Temperature rise Class H

Bearing: quantity, type 1, Sealed Ball

Coupling Direct

Amortisseur windings Full

Voltage regulation, no-load to full-load

RMS 1.5%

One-step load acceptance 100% of Rating

Peak motor starting kVA @ 240 V: 32

Sound Data Model 12RES 8 point logarithmic average sound level is 65 dB(A).

For comparison to competitor ratings, the lowest point sound level is 63 dB(A).*

All sound levels are measured at 7 meters (23 ft.) with no load.

* Lowest of 8 points measured around the generator. Sound levels at other points around generator may vary depending on installation parameters.

ADC-RES Controller

Controller Features

D Membrane keypad:

d Arrow keys step through generator set status displays d Password-protected access to system configuration and adjustment menus d System voltage/frequency selection and engine configuration d Voltage, gain, and engine speed adjustment D LED display:

d Engine runtime, hours d Output voltage, VAC d Output frequency, Hz d Battery voltage, VDC d Crank cycle status d Setup information d Software version d Faults

D Faults displayed:

d High battery voltage d High engine temperature d Low battery voltage d Low oil pressure d Overcrank d Overfrequency d Overspeed d Overvoltage d Underfrequency d Undervoltage

D Compact controller integrally mounted to the generator set D Remote two-wire start/stop capability D Digital isochronous governor to maintain steady-state speed at all loads

D Digital voltage regulation:±1.5% RMS no-load to full-load D Automatic start with programmed cranking cycle D Field-upgradeable application software D Front-access DB9 connector for software upgrade on the junction box

D Generator set master switch (Run/Off-Reset/Auto) on the junction box

Standard Features

D ADC-RES Advanced Digital Control

D Battery cables

D 6-amp battery charger

D EPA-certified fuel system

D Critical silencer

D Field-connection terminal block

D Premium 5-year/2000 hour limited warranty for standby (on-grid) applications

D 18-month/1000 hour limited warranty for non-standby (off-grid) applications

D Fuel solenoid valve and secondary regulator

D Integral vibration isolation

D Line circuit breaker, 50 amps

D Field-convertible fuel system, LPG/natural gas

D Oil drain extension with shutoff valve

D Polymer base

D Rodent-resistant construction

D Sound-deadening, flame-retardant foam per UL 94, class HF-1

D Sound enclosure, quiet 65 dB(A) operation

Available Accessories Approvals and Listings

- CSA Certification (60 Hz)

Electrical System

- Battery

- Battery heater

- Relay kit: auxiliary run relay and common fault relay

Fuel System

- Gas strainer

- Flexible fuel line

Maintenance

- Maintenance kits

- General maintenance literature kit

- Overhaul literature kit

- Production literature kit

Starting Aids

- Carburetor heater, 120 VAC (recommended for reliable starting at temperatures below 0_C [32_F ])

Transfer Switch

- Kohler automatic transfer switch

Available Accessories Model RDT Automatic Transfer Switch

D UL listed

D 100, 200, or 400 amps

D 200 amp service entrance-rated model also available

D 240 VAC/60 Hz or 220 VAC/50 Hz

D Available with or without built-in load center

D Equipped with MPACt 500 microprocessor-based controls

D User-friendly controller interface with easy-to-read international symbols

See the RDT specification sheet for more information.

KOHLER CO., Kohler, Wisconsin 53044 USA Phone 920-457-4441, Fax 920-459-1646 For the nearest sales and service outlet in the US and Canada, phone 1-800-544-2444 KOHLERPower.com

W L

H

2015 Kohler Co. All rights reserved.

DISTRIBUTED BY:

Dimensions and Weights

Overall Size, L x W x H: 1123 x 726 x 803 mm (44.2 x 28.6 x 31.6 in.)

Weight: 182 kg (400 lb.)

Shipping weight: 195 kg (430 lb.)

NOTE: These drawings are provided for reference only and should not be used for planning installation. Contact your local distributor for more detailed information.

1OutBack reserves the right to make changes to the products and information contained in this document without notice.

Copyright © 2018 OutBack Power. All Rights Reserved. OutBack is a registered trademark of The Alpha Group.

M A N A G E T H E S Y S T E M

• OPTICS RE System Monitoring and Control

• MATE3s System Display and Communications

S T O R E T H E E N E R G Y

• EnergyCell PLC, PL and OPzV Batteries

• Battery Enclosures and Racking

M A K E T H E P O W E R

• FLEXpower Integrated Systems

• Inverter/Chargers & Charge Controllers

O U T B A C K P O W E R — M A S T E R S O F T H E O F F - G R I D . F I R S T C H O I C E F O R T H E N E W G R I D .

FLEXpower Radian

F U L LY P R E - A S S E M B L E D 4 A N D 8 K W I N V E R T E R S Y S T E M S

Three Reasons to Choose the FLEXpower Radian Integrated System from OutBack Power:

1 . E N G I N E E R E D F O R F A S T E R , E A S I E R I N S T A L L AT I O N

• Factory tested, pre-wired and pre-configured system for fast installation

• Includes a fully integrated GS load center for quick and easy connections

• Charge controller, programming and networking components are completely integrated—just install the mounting bracket, hang the system on a wall, make the necessary connections, site specific programming and the system is fully operational

• Optimized system footprint for cleaner installations in half the time

2 . D E S I G N E D F O R F L E X I B I L I T Y

• 4kW: Ideal for smaller power applications including homes, cabins, remote communication sites and backup power systems.

• 8kW: Ideal for medium-sized power…