Attachment 3 DWG Main pole cap REV 1.pdf

This is a technical drawing for a low-carbon steel structural plate assembly. The document shows detailed dimensional specifications and notes for manufacturing a structural component measuring approximately 15.34 inches in length, with various width measurements including 6.25 inches, 6.50 inches, and 8.00 inches. The drawing includes five circular mounting holes positioned along the centerline of the plate, with precise positioning dimensions and mounting hole specifications indicated as 3/2 inch diameter. The right side of the assembly features a vertical extension with detailed measurements including heights of 8 1/2 inches and 7.32 inches, with additional features such as notches and radiused corners marked at R 25. The drawing references ASTM A36 material specifications and indicates it is a two-piece component plate per STM-63 type II classification. Multiple dimension callouts are provided throughout the drawing with standard engineering notation, including radius dimensions (R 23 1/16), angle specifications (25°), and various linear measurements in inches. The document includes a title block in the upper right corner with standard engineering drawing elements, though specific contract, agency, or procurement details are not visible on this technical schematic.