ATTACHMENT 3 CLIN 0002 DRAWING.pdf

This document is a technical drawing and specification sheet for a machined assembly component. The drawing depicts a cylindrical part with detailed dimensional specifications, including overall dimensions ranging from 0.0 to 12.0 inches in various directions, with specified tolerances for casting and machining operations. The tolerance table indicates allowances for different measurement ranges, with casting tolerances ranging from ±.06 to ±.26 inches depending on the dimension category, and machining tolerances from ±.02 to ±.020 inches.

The specification includes detailed fabrication and assembly requirements, including a requirement that all self-locking externally threaded fasteners must incorporate self-locking inserts conforming to MIL-F-18240 specification. These fasteners must display a minimum of six raised or depressed dots (approximately .032 diameter) on the fastener head to indicate proper locking capability. The document also specifies angular tolerances of ±1° for piping and ventilation ducting and ±.5° for hanger mounts within specified ranges, with additional angle tolerances of ±.8° for other applications. Surface texture, threads, and fillets must comply with ANSI Y14.36-1978 standards and FED-STD-H28 requirements.