Attachment 2 Technical_PipeBending.xlsx
XLSX spreadsheet 17 KB Posted
- Attached to
- AFLCMC Pipe Bending Machine
- Solicitation number
- 47QSWC25Q0111
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a Technical Specification Matrix for a Pipe Bending Machine Solicitation (RFQ 47QSWC25Q0111) issued by the United States Air Force Life Cycle Material Command (AFLCMC). The solicitation is a small business set-aside for a Firm-Fixed Price supply contract for manual pipe bending machines with specific technical requirements. The required machine must be floor-mounted, with a 1.5-inch OD capacity, maximum center line radius of 8 inches, 195-degree maximum bend arm movement, and 10-foot maximum over-mandrel tube length. The technical specifications include detailed requirements for machine dimensions, weight, and comprehensive tooling package, including 20 mandrels, 6 mandrel rods, 9 clamp blocks, 9 side blocks, a mandrel extractor system, angle bend indicator assembly, hydraulic system, and wrench set. Offerors are required to complete the matrix, indicating whether their proposed solution meets, does not meet, or exceeds each specification, and provide reference page numbers and detailed explanations for any deviations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment_002_Contractor_Questions_PipeBending_5162025.xlsx | XLSX spreadsheet | |
| Amendment_002_47QSWC25Q0111_GovResponseToKTRQuestions.pdf | ||
| Amendment_002_Packing instructions.pdf | ||
| Amendment_002_RFQ Amendment_PipeBending_6172025.docx | DOCX document | |
| Amend_01_Q0111_Ext.PipeBending_6112025.pdf | ||
| RFQ_47QSWC25Q0111_pipebending.docx | DOCX document | |
| Attachment 1 Pricing Spreadsheet_PipeBending.xlsx | XLSX spreadsheet | |
| Attachment 3_ASSIST Registration.pdf | ||
| Attachment 4 Shipping Locations_PipeBending.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tab 1-Technical Acceptability
| 47QSWC25Q0111 - Pipe Bending Machines | |||
| Attachment 1: Section 1 - Technical MATRIX | |||
| Offeror to complete responses within the blue fields | |||
| SPECIFICATION / SALIENT CHARACTERISTICS | OFFEROR'S SPECIFICATION / SALIENT CHARACTERISTIC (Select from Drop Down if proposed solution meets, does not meet, or exceeds required specifications) | OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quotel that meets or exceeds required specifications) | COMMENTS (If proposing different specifications, provide a detailed explanation for how proposed speciifcation lacks or exceeds the Government's requirements. |
| NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!) | Meet | Does Not Meet | Exceeds | ||||
| Pipe Bending Machine Technical Specifications | |||||||
| •Manual bending machine | MEETS | ||||||
| • | Floor mounted | ||||||
| • | Hydraulic foot operated manual extractor | DOES NOT MEET | |||||
| • | Capacity 1.5 in OD | ||||||
| • | Center line radius 8 in max | ||||||
| • | Maximum bend arm movement 195° | ||||||
| • | Maximum over-mandrel tube length 10 ft | ||||||
| • | Machine floor space 12 ft(L) X 40 in(W) X 40 in(H) | ||||||
| • | Weight 900 lb | ||||||
| • | Tooling: | ||||||
| o | 20 mandrels 0.375 to 1.5 in | ||||||
| o | 6 mandrel rods | ||||||
| o | 9 clamp blocks 0.375 to 1.5 in | ||||||
| o | 9 side blocks 0.375 to 1.5 in | ||||||
| o | Mandel extractor system | ||||||
| o | Angle bend indicator assembly | ||||||
| o | Hydraulic system | ||||||
| o | Wrench set |
Note: Any deviation from the above described equipment, characteristics and requested delivery and installation shall be noted in the offeror’s Technical Discussion and explanation provided for how it compares to the required specifications and delivery as well as detailed descriptions of any added value or benefit to the Government.
File details come from the government source that posted it. Updated .