Attachment 2 Technical_EngineLathes.xlsx
XLSX spreadsheet 18 KB Posted
- Attached to
- AFLCMC Engine Lathes
- Solicitation number
- 47QSWC25Q0104
- Issued by
-
GSA Federal Acquisition Service
About this file
This is a Technical Specification Matrix for an engine lathe solicitation by the Air Force Life Cycle Material Command (AFLCMC). The solicitation (47QSWC25Q0104) is a small business set-aside, firm-fixed price supply contract for purchasing engine lathes to support precise metal shaping and cutting operations. Two specific engine lathe models are compared in the technical matrix: a heavy-duty 8054VS model with 15 HP motor and 60-inch center-to-center capacity, and a toolroom 3416-2111-1018 model with 220V power and 18-inch center-to-center capacity. The technical matrix allows offerors to demonstrate how their proposed equipment meets, does not meet, or exceeds the government's technical specifications, with requirements for detailed documentation of any deviations from the specified equipment characteristics.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment_002_47QSWC25Q0104_GovResponseToKTRQuestions.pdf | ||
| Amendment_002_Packing instructions.pdf | ||
| Amendment_002_RFQ Amendment_EngineLathe_6172025.docx | DOCX document | |
| Amendment_002_Contractor_Questions_EngineLathe_0016_5202025.xlsx | XLSX spreadsheet | |
| Amend_01_Q0104_Ext.EngineLathe_6112025.pdf | ||
| Attachment 4 Engine Lathe_Shipping Locations.xlsx | XLSX spreadsheet | |
| Attachment 3_ASSIST Registration.pdf | ||
| RFQ_47QSWC25Q0104_enginelathe.docx | DOCX document | |
| Attachment 1 Pricing Spreadsheet_EngineLathe.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tab 1-Technical Acceptability
| 47QSWC25Q0104 - Engine Lathes | |||
| Attachment 1: Section 1 - Technical MATRIX | |||
| Offeror to complete responses within the blue fields | |||
| SPECIFICATION / SALIENT CHARACTERISTICS | OFFEROR'S SPECIFICATION / SALIENT CHARACTERISTIC (Select from Drop Down if proposed solution meets, does not meet, or exceeds required specifications) | OFFEROR'S QUOTE REFERENCE (Provide Page Number, Section/Paragraph of quotel that meets or exceeds required specifications) | COMMENTS (If proposing different specifications, provide a detailed explanation for how proposed speciifcation lacks or exceeds the Government's requirements. |
| NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!) | Meet | Does Not Meet | Exceeds | ||||
| Part Number: 8054VS (Salient Characteristics) | |||||||
| • | Heavy Duty, general purpose | MEETS | |||||
| • | Motor HP 15 | ||||||
| •Center to Center 60 in | DOES NOT MEET | ||||||
| •Swing 18.125 in | |||||||
| •Cross swing 10.625 in | |||||||
| •Swing over gap 28.75 in | |||||||
| •Spindle type D1-8 | |||||||
| •Spindle HP 12.5 | |||||||
| •Variable spindle speed | |||||||
| •Max spindle speed 2000 RPM | |||||||
| •Spindle hole diameter 3 in | |||||||
| •Hand and power operated | |||||||
| •Headstock drive direct pulley | |||||||
| •Tailstock taper 6MT | |||||||
| •Power 208/230/460V, 3 phase, 60 Hz | |||||||
| •Weight 5765 lb | |||||||
| Part Number: 3416-2111-1018 (Salient Characteristics) | |||||||
| •Toolroom lathe, floor mounted | |||||||
| •Power: 220 V, 3 phase, 60Hz | |||||||
| •Hand and power operated | EXCEEDS | ||||||
| •Geared Head | |||||||
| •Center to Center: 18 in | |||||||
| •Spindle Speed: 125 to 3000 RPM | |||||||
| •Spindle hole diameter: 1.25 in | |||||||
| •Swing over bed: 11 in | |||||||
| •Swing over carriage: 9 in | |||||||
| •Swing over cross: 6 in | |||||||
| •Thread quantity range: 11 to 108 per inch | |||||||
| • | Dimensions | ||||||
| o | Length: 71.5 in | ||||||
| o | Width: 31 in | ||||||
| o | Height: 72.75 in | ||||||
| o | Weight 2250 lb | ||||||
| 3 Jaw Chuck, Collet Chuck, Collets, | |||||||
| • | Quick Change Tool Post with Toolholders and Cutter Holders |
Note: Any deviation from the above described equipment, characteristics and requested delivery and installation shall be noted in the offeror’s Technical Discussion and explanation provided for how it compares to the required specifications and delivery as well as detailed descriptions of any added value or benefit to the Government.
File details come from the government source that posted it. Updated .