Attachment_2-_Supply_Requirement_1.pdf
PDF 105 KB Posted
- Attached to
- CTL, JBER AFB Widland Fire Branch, AK
- Solicitation number
- DOIFFBO260134
About this file
This is a Statement of Work (SOW) for the procurement of a Caterpillar 275 XE Skid Steer (CTL) with attachments and optional equipment packages for the U.S. Air Force Wildland Fire Branch at Joint Base Elmendorf-Richardson (JBER), Alaska.
The equipment must meet or exceed specified standards including a minimum gross power of 122 hp per SAE J1995, 221 cubic inch displacement, and peak torque of 406 lb./ft. Operating specifications include a 35% tipping load capacity of 4205 lbs., breakout force of 6422 lbs. for the lift cylinder, and ground pressure of 4.5 psi with 450 mm tracks. The machine must include an operating weight of 12705 lbs. and dimensions supporting a maximum dump angle of 44.7 degrees. Required package options and specifications include two copies of the owner's/operating manual and one digital parts manual, a 2.5 lb. ABC fire extinguisher, a five-year/2000-hour warranty, four-hour on-site machine orientation, cold weather equipment (including a 120V jacket water heater/block heater kit), and an OEM-approved high cold cranking amp battery with blanket and maintainer. Optional packages available include the LM2 Land Management Package with HD2 features, enclosed cab with heating and air conditioning, Technology Package T4, and various protective and auxiliary kits. Numerous attachments are specified including mulchers, grapple rakes, dozer blades, snow equipment, stump grinders, and fork carriages. Delivery must occur to JBER-AFB, AF Wildland Fire Branch at 7212 12th Street, JBER, AK 99506, with 48-hour advance coordination required with the Government Point of Contact Kevin McCasland (907-707-8301) and SPOC Rawlin Myers (907-791-0414).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_3-_Applicable_Clauses_1.pdf | ||
| Attachment_1-_Notice_of_Intent_1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
All products must meet standards greater than or equal too.
Name of Item: Skid Steer (CTL) Plus attachments listed in this Statement of Work
Manufacturer: Caterpillar
Model Number: 275 XE
Salient Characteristics:
Engine
Gross Power - SAE J1995: must be at least 122hp
Bore: 3.9 inches
Displacement: 221 in
Net Power: ISO 120 hp
Net Power - SAE 82 hp
Peak Torque: 406 lb./ft
Stroke: 4.7 inches
Operating Specifications
Rated Operating Capacities - 35% Tipping Load: 4205 lbs.
Breakout Force - Lift Cylinder: 6422 lbs.
Breakout Force - Tilt Cylinder 9963 lbs.
Ground Pressure - With 450 mm/17.7 in Track: 4.5 psi
Rated Operating Capacities - 50% Tipping Load: 4033 lbs.
Rated Operating Capacity with Optional Counterweight 2996 lbs.
Tipping Load 12015 lbs.
Weights
Operating Weight 12705 lbs.
Dimensions
Clearance at Maximum Lift and Dump: 106.1 inches
Ground Clearance: 11 inches
Height - Top of Cab: 87.8 inches
Length - Track on Ground: 72.3 inches
Length - With Bucket on Ground: 152.8 inches
Maximum Overall Height: 165.1 inches
Overall Length - with Track: 92.2 inches
Turning Radius from Center - Bucket (racked) 91.3 in
Turning Radius from Center - Coupler 60.3 in
Turning Radius from Center - Machine Rear 76 in
Vehicle Width (450 mm/17.7 in tracks): 77.8 in
Maximum Dump Angle: 44.7°
Service Refill Capacities
Cooling System: 4.6 gal.
Engine Crankcase: 2.4 gal.
Fuel Tank: 36.9 gal.
Hydraulic System:10.8 gal
Hydraulic Tank: 6.9 gal.
Diesel Exhaust Fluid (DEF) Tank: 2.9 gal.
Power Train
Travel Speed - Forward or Reverse - One Speed: 5.2 mile/h
Travel Speed - Forward or Reverse - Two Speed: 7.8 mile/h
Hydraulic System
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure: 4496 psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow: maximum 40 gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated): 103.9 hp
Package Options and Other Specifications Needed
• Two copies of Owners/Operating Manual and One digital copy of parts manual
• Dealer procured and Installed 2.5 lb. ABC Fire Extinguisher, mounted for emergency access
• Warranty of 5 years/2000 hrs.
• Four-hour Machine Orientation on site
• Service and Safe operation techniques
• Cold Weather Equipment: Machine shall be equipped with
Jacket Water Heater/Block Heater Kit 120V part number 597-1492.
Dealer installed
Highest Cold Cranking Amp battery OEM-approved Battery blanket 120V Battery maintainer/trickle charger Single -point plug for engine block heater and battery maintainer
• LM2 Land Management Package LM2 (HD2 + increased fuel capacity (220 L/58 gal); most of the following options may be included in the Land management package. If not, include the following options.
• HD2 Package:
Engine air inlet rain cap Front cab-to-frame sealing Hydraulic fill access door Cab-to-frame side sealing Lockable fuel fill access door Tilt cylinder guarding Turbo guard Exhaust stack wrap DPF wrap Quick disconnect guarding Fully enclosed drive line guarding Under-step hydraulic lines guard cover Engine air inlet pre-cleaner
• Enclosed Cab with heat and air conditioning Package:
Side Windows Cup Holder Cell Phone Pocket Choice of Seat (Ventilated and Heated Air Ride Seat) Door choice (Polycarbonate)
• Technology Package T4:
Advanced Touchscreen Monitor Advanced Joysticks Push start X-mount cell phone holder Rear-view camera
• Falling Object Protection System Level 2 (FOPS Level 2) Kit Part number: 650-7628
• Hydraulic Coupler Kit Part number: 653-8061 275XE
• Debris Guarding Kit Part number: 637-4922
• Rear Window Guard Kit Part number: 624-9966
• Track Removal and Install Aid Kit Part number: 642-3271 275XE
• 1-Speed to 2-Speed Software Enabled Attachment (SEA) Kit Part number: 642-9397
• Auxiliary Hydraulic Cooler Kit Part number: 609-9666 275XE
• Auxiliary Hose Guide Kit Part number: 655-5597 275XE
• External Fuel Tanks Kit Part number: 653-7481275XE
• Rear Auxiliary (Aux) Ready Kit Part number: 622-5615 275XE
• Rear Winch Kit Part number: 612-8941 275XE
• Reversing Fan Kit Part number: 637-3002 275XE
• Screw to Connect Quick Disconnects Kit Part number: 572-7968 275XE
• Cab Fire Extinguisher Mount Kit Part number: 642-8875 All Models
• Warning Lights Kit Part number: 612-6870 All Models
• Rear Roading Lights Kit Part number:637-2999
Attachments
• Mulcher HM418 Part number: 475-2800
• Mulcher Teeth Rock Resistant Tooth Part number: 475-2813 (Qty: 40 per order)
• INDUSTRIAL GRAPPLE RAKES
Part number: 627-4316
• DOZER BLADE 6-WAY
Part number: 539-9210
• ANGLE BLADES
Part number: 177-1990
• ANGLE BLADE SNOW AND IMPACT KIT
Part number: 225-9523
• SNOW WINGS 9ft Part number: 6087780
• CURB RUNNER KIT – SNOW WINGS
Part number: 602-7948
• SNOW BLOWER
Part number:585-5467
• Stump Grinder SG36 Part number: 424-0460
• HEAVY DUTY FORK CARRIAGES class 3 Part number: 617-2782
• (2) PALLET FORK TINES class 3 597-2680
Delivery location and Point of Contacts
Dealer shall deliver the equipment to the delivery location identi�ied in the contract. The contractor shall coordinate delivery with the Government Point of Contact 48 hours before delivery.
JBER – AFB - AF Wildland Fire Branch 7212 12th ST JBER, AK 99506
POC: Kevin McCasland 907-707-8301 SPOC: Rawlin Myers 907 791-0414
File details come from the government source that posted it. Updated .