Attachment 2 - Specifications CYPRESS DD FY 26.pdf

USCGC CYPRESS (WLB 210)

SPECIFICATION FOR DRYDOCK REPAIRS

FY2025

Developed By: Keith A Hoefer

(REV-3, 29 AUG 2025)

USCGC CYPRESS (WLB-225B) DRYDOCK AVAILABILITY FY2025

ii (Rev-3)

TABLE OF CONTENTS

Revisions Record ........................................................................................................................................... v Consolidated List of References ................................................................................................................... vi Consolidated List of Government-furnished Property ............................................................................... xix Consolidated List of Critical Inspection Items ........................................................................................ xxiii Principal Characteristics ............................................................................................................................ xxv General Requirements WORK ITEM 1: Fire Prevention Requirements WORK ITEM 2: Hull Plating, U/W Body, Inspect WORK ITEM 3: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 4: Hull Plating, Freeboard, Ultrasonic Testing WORK ITEM 5: U/W Body, Preserve, Partial, Condition A WORK ITEM 6: U/W Body, Preserve, Partial, Condition B WORK ITEM 7: U/W Body, Preserve, Partial, Condition C WORK ITEM 8: Hull Plating Freeboard, Preserve, Partial WORK ITEM 9: Appendages, U/W, Leak Test WORK ITEM 10: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 11: Appendages, U/W, Internal, Preserve WORK ITEM 12: Chain Lockers, Clean and Inspect WORK ITEM 13: Voids, Non-Accessible, Leak Test WORK ITEM 14: Voids, Non-Accessible, Internal Surfaces, Preserve WORK ITEM 15: Tanks, MP Fuel Service, Clean and Inspect WORK ITEM 16: Tanks, Potable Water, Clean and Inspect WORK ITEM 17: Tanks, Ballast, Clean and Inspect WORK ITEM 18: Voids, Accessible, Clean and Inspect WORK ITEM 19: Tanks, Dirty Oil and Waste, Clean and Inspect WORK ITEM 20: Hydraulically Operated Cargo Hatch, Inspect and Service WORK ITEM 21: Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal WORK ITEM 22: Propulsion Shaft Seals, Bulkhead, Overhaul WORK ITEM 23: Strain Gage Alignment, Check WORK ITEM 24: Propulsion Shaft Bearings, External, Check Clearances WORK ITEM 25: Controllable Pitch Propellers, Clean and Inspect WORK ITEM 26: Controllable Pitch Propeller, System Maintenance, Perform WORK ITEM 27: Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform WORK ITEM 28: Main Reduction Gear, Shaft End NDT WORK ITEM 29: Controllable Pitch Propeller Hub, Remove and Reinstall WORK ITEM 30: Sea Water System Piping, Clean and Flush WORK ITEM 31: Heat Exchangers, Clean, Inspect And Hydro WORK ITEM 32: Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean WORK ITEM 33: Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean WORK ITEM 34: Emergency Diesel Generator, Clean & Inspect WORK ITEM 35: Fathometer Transducer, General Maintenance WORK ITEM 36: Vent Ducts, Engine And Motor Room, All, Commercial Cleaning WORK ITEM 37: Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning WORK ITEM 38: Vent Ducts, Laundry Exhaust, Commercial Cleaning WORK ITEM 39: Vent Ducts, All Other, Commercial Cleaning WORK ITEM 40: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 41: Sea Strainers, All Sizes, Renew WORK ITEM 42: Sea Strainers, Duplex, All Sizes, Overhaul iii (Rev-3)

WORK ITEM 43: Sea Strainers, Simplex, All Sizes, Clean and Inspect WORK ITEM 44: Sea Bay, Clean and Inspect WORK ITEM 45: Sea Bay, Preserve 100% WORK ITEM 46: Potable Water Pneumatic Tanks, Clean and Inspect WORK ITEM 47: Compressed Air Receivers and System Valves, All, Clean, Inspect, Hydro and Lift . 183 WORK ITEM 48: Rudders, Preserve, 100 Percent WORK ITEM 49: Rudder Stock Bearings, Check Clearances WORK ITEM 50: Rudder, Inspect And Repair WORK ITEM 51: Rudder and Rudder Stock, Remove and Inspect WORK ITEM 52: Rudder Bearings, Renewal WORK ITEM 53: Thruster Units, Overhaul Fluid Change to EAL WORK ITEM 54: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test WORK ITEM 55: Hydraulic Chain Stoppers, Inspect And Service WORK ITEM 56: Crossdeck Winches, Inspect and Service WORK ITEM 57: Hydraulic Inhaul Winch, Inspect And Service WORK ITEM 58: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 59: Anchor Windlass, Inspect and Service WORK ITEM 60: Anchor Chains and Ground Tackle, Inspect and Repair WORK ITEM 61: Anchor Chain and Ground Tackle, Preserve WORK ITEM 62: Anchors, Preserve WORK ITEM 63: Hawse Pipes, Preserve WORK ITEM 64: Warping Capstan, Inspect and Service WORK ITEM 65: Hull Fittings (Mooring and Towing), Inspect and Test WORK ITEM 66: Single Point Davit, Inspect and Service WORK ITEM 67: Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul WORK ITEM 68: Commissary Hoist, Inspect and Service WORK ITEM 69: Buoy Crane, Appleton EB600-60-40, Inspect and Service WORK ITEM 70: Grey Water Holding Tanks, Clean and Inspect WORK ITEM 71: Sewage Holding Tanks, Clean and Inspect WORK ITEM 72: Grey Water Piping, Clean and Flush WORK ITEM 73: Sewage Piping, Clean and Flush WORK ITEM 74: Accessible Voids, Preserve, 100 Percent WORK ITEM 75: Tanks, Ballast, Preserve, Partial WORK ITEM 76: Chain Locker, Preserve, 100 Percent WORK ITEM 77: Accessible Void(s), Preserve, Partial, WORK ITEM 78: Tanks, Potable Water, Preserve, Partial, WORK ITEM 79: Decks – Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 80: Hull Plating Freeboard (Buoy Port Areas), Preserve WORK ITEM 81: Superstructure, Preserve, Partial WORK ITEM 82: Cathodic Protection, Zinc Anodes, Renew, WORK ITEM 83: Impressed Current Cathodic Protection System, Inspect and Maintain WORK ITEM 84: Impressed Current, Cathodic Protection System, Reference Cells, Renew WORK ITEM 85: Drydock WORK ITEM 86: Temporary Services, Provide - Cutter WORK ITEM 87: Sea Trial Performance, Support, Provide WORK ITEM 88: Potable Water Pump Room Deck, Preserve WORK ITEM 89: Bilges, Preserve WORK ITEM 90: Deck Covering, Interior, Wet and Dry, Renew WORK ITEM 91: Space or Component, Preserve WORK ITEM 92: Water Tight Hatches, Internal DC Deck and Below, Renew WORK ITEM 93: Watertight Doors and Scuttles, External, Renew iv (Rev-3)

WORK ITEM 94: Life Rail Renewal WORK ITEM 95: Missing Handgrabs, Install WORK ITEM 96: SW Ballast Tank TLI, Repair WORK ITEM 97: Fuel Oil (FO) Piping, Renew WORK ITEM 98: Circuit Breakers, Inspect, Maintain & Test WORK ITEM 99: Single Point Davit Ladder, Renew WORK ITEM 100: Exterior Deck Drain, Renew WORK ITEM 101: Shower Pan Renew WORK ITEM 102: Boat Deck, Port and Starboard, Removable Lifeline Latches, Modify WORK ITEM 103: Steering Gear Heat Exchanger, Modify WORK ITEM 104: Steering System PLC, Upgrade WORK ITEM 105: Galley Vent Ducting Modify WORK ITEM 106: Thruster Generator, Clean & Inspect WORK ITEM 107: Fluxgate Digital Compass System, Upgrade WORK ITEM 108: Directional Control Valve, Upgrade WORK ITEM 109: Independent NACE Inspector (Level 3), Provide WORK ITEM 110: Tenting, Provide v (Rev-3)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

21 Aug 2025 1 All Correction to the Consolidated Reference, GFP and CIR list.

27 Aug 2025 2 31, 32 Work Item 31: Added language specifying cleaning method

Work Item 32: Deleted unnecessary section of Table 1

Work Item 56: Updated Table 2 to include missing information

Updated CIR List

29 Aug 2025 3 25 Work Item 25: Previously titled “Propulsion Shaft Bearing, Stave Renewal.” Work item has been removed.

Updated Table of Contents for correct numbering of Work

Items

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

vi (Rev-3)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

«Drawings»

«Dwg»

Coast Guard Drawing (CGDWG) 225-WLB-561-202, Rev B, JAN 2021, Steering Control Wiring

Diagram

Coast Guard Drawing 225 WLB 184-001, Rev B, CRP-V850 Transducer Adapter Ring

Coast Guard Drawing 225 WLB 243-202, Rev C, Bulkhead Type Seal

Coast Guard Drawing 225 WLB 243-206, Rev E, CPP Propeller Shaft

Coast Guard Drawing 225 WLB 256-001, Rev P, Seawater Cooling System Diagram

Coast Guard Drawing 225 WLB 259-005, Rev C, Combustion Intake & Exhaust A&D Hull Block 940

Coast Guard Drawing 225 WLB 424-001, Rev G, Acoustic Navigation System Block & Isometric

Coast Guard Drawing 225 WLB 581-001, Rev E, Anchor Handling System Arrangement

Coast Guard Drawing 225 WLB 601-001, Rev M; General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225 WLB 801-020, Rev B, Tank CAPACITY - 95% Curves

Coast Guard Drawing 225B 910-001, Rev E, Hull Block 910, Panels

Coast Guard Drawing 225B WLB 114-001, Rev C, Shell Appendages

Coast Guard Drawing 225B WLB 114-002, Rev -, Flow Accelerating Fin

Coast Guard Drawing 225B WLB 167-1, Rev K, Structural Closures

Coast Guard Drawing 225B WLB 541-007, Rev D; Incinerator Fuel Oil Service Tank

Coast Guard Drawing 225B WLB 573-001, Rev E, Buoy Handling System Arrangement

Coast Guard Drawing 225B WLB 635-1, Rev B, Hull Thermal & Acoustic Insulation

Coast Guard Drawing 225B WLB 801-006, Rev D, Docking Drawing

Coast Guard Drawing 225B WLB 801-006, Rev G, Docking Drawing

Coast Guard Drawing 225B WLB 111-001, Rev A, Shell Expansion

Coast Guard Drawing 225B WLB 111-001, Rev A; Shell Expansion

Coast Guard Drawing 225B WLB 114-001, Rev C; Shell Appendages

Coast Guard Drawing 225B WLB 180-002, Rev E, Foundations, Block 910

Coast Guard Drawing 225B WLB 201-001, Rev D, Machinery Spaces Arrangement

Coast Guard Drawing 225B WLB 243-001, Rev J, Propulsion Shaft Arrangement

Coast Guard Drawing 225B WLB 243-001, Rev J, Propulsion Shafting Arrangement vii (Rev-3)

Coast Guard Drawing 225B WLB 243-002, Rev G, Stern Tube and Bearings A&D

Coast Guard Drawing 225B WLB 256-001, Rev M, Seawater Cooling System Diagram

Coast Guard Drawing 225B WLB 256-001, Rev P, Seawater Cooling System Diagram

Coast Guard Drawing 225B WLB 259-001, Rev D, Combustion Intake & Exhaust Diagram

Coast Guard Drawing 225B WLB 259-005, Rev C, Combustion Intake & Exhaust A&D Hull Block 940

Coast Guard Drawing 225B WLB 259-006, Rev D, Combustion Intake & Exhaust A&D Hull Blocks 970

& 975

Coast Guard Drawing 225B WLB 512-001, Rev K, HVAC Diagram

Coast Guard Drawing 225B WLB 512-007, Rev B, HVAC A&D, Fr 66-92, Innerbttm & 1st Platform

Coast Guard Drawing 225B WLB 528-001, Rev G, Plumbing and Interior Deck Drains

Coast Guard Drawing 225B WLB 528-002, Rev D, Weather Deck Drains Diagram

Coast Guard Drawing 225B WLB 528-002, Rev E, Weather Deck Drains Diagram

Coast Guard Drawing 225B WLB 528-009, Rev C, Plumbing and DK Drains, A/D FR 76 AFT, ABV MN

DK, Block 970

Coast Guard Drawing 225B WLB 532-002, Rev D, Potable Water Sys Dia

Coast Guard Drawing 225B WLB 541-001, Rev G; Fuel Oil System Diagram

Coast Guard Drawing 225B WLB 541-001, Rev J, Fuel Oil System Diagram

Coast Guard Drawing 225B WLB 541-003, Rev E, Fuel Oil Service System, A/D FR 66 AFT, Block 940, Coast Guard Drawing 225B WLB 541-011, Rev -, MMA Fuel Oil Service Diagram

Coast Guard Drawing 225B WLB 549-001, Rev A, Onboard Lubrication Requirements

Coast Guard Drawing 225B WLB 549-001, Rev C, Onboard Lubrication Requirements

Coast Guard Drawing 225B WLB 551-001, Rev G, Compressed Air System Diagram

Coast Guard Drawing 225B WLB 556-001, Rev F, Hydraulic System Diagram

Coast Guard Drawing 225B WLB 556-001, Rev F, Hydraulic System Diagram

Coast Guard Drawing 225B WLB 556-005, Rev D, Aft Hydraulic System A/D, Fr 66 Aft, Block 950, 970

Coast Guard Drawing 225B WLB 562-002, Rev C; Rudder Structural A & D

Coast Guard Drawing 225B WLB 562-002, Rev D, Rudder Structural A&D

Coast Guard Drawing 225B WLB 568-1, Rev A, Bow Thruster Arrangement and Detail

Coast Guard Drawing 225B WLB 573-002, Rev -, Weight Handling System Arrangement

Coast Guard Drawing 225B WLB 573-009, Rev E, Bi-Dir Ch Stopper With Retractable Roller Stopper

Coast Guard Drawing 225B WLB 573-012, Rev -, Rising Sheave Chain Stopper Ripout Incidental to

Upgrade

Coast Guard Drawing 225B WLB 573-013, Rev B, Rising Sheave Chain Stopper Mechanical Mods

Incidental to Upgrade

Coast Guard Drawing 225B WLB 573-014, Rev -, Rising Sheave Chain Stopper Hydraulic Mods

Incidental to Upgrade

Coast Guard Drawing 225B WLB 573-11, Rev G, ATON Tie Downs

Coast Guard Drawing 225B WLB 581-001 Rev C, Anchor Handling System Arrangement

Coast Guard Drawing 225B WLB 581-001, Rev C, Anchor Handling System Arrangement

Coast Guard Drawing 225B WLB 582-001, Rev -, Mooring and Towing A & D

Coast Guard Drawing 225B WLB 593-001, Rev D, Sewage and Waste Water System Diagram

Coast Guard Drawing 225B WLB 593-001, Rev E, Sewage and Waste Water System viii (Rev-3)

Coast Guard Drawing 225B WLB 593-009, Rev B, Sewage Holding Tank

Coast Guard Drawing 225B WLB 601-001, Rev F, General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev L; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev M; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev N, GENERAL ARRANGEMENTS INBOARD AND

OUTBOARD PROFILES

Coast Guard Drawing 225B WLB 601-001, Rev N; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev P; General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225B WLB 601-002 Rev K, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev G, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev H, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev K, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev L, Booklet off General Drawings

Coast Guard Drawing 225B WLB 633-001, Rev B, Cathodic Protection System Arrangement, Block

Diagram, Wiring Deck Plan, and Elementary Diagrams

Coast Guard Drawing 225B WLB 633-002, Rev A; Cathodic protection passive

Coast Guard Drawing 225B WLB 635-001, Rev E, Hull, Thermal, & Acoustic Insulation Schedule

Coast Guard Drawing 225B WLB 672-001, Rev C, Storerooms, Cargo Stowage and Ship Store

Arrangement and Details

Coast Guard Drawing 225B WLB 801-001, Rev A, Lines and Offsets

Coast Guard Drawing 225B WLB 801-003, Rev -, Curves of Forms and Cross Curves of Stability

Coast Guard Drawing 225B WLB 801-005, Rev A Tank CAPACITY - 95% Curves

Coast Guard Drawing 225B WLB 801-006, Rev C; Docking Drawing

Coast Guard Drawing 225B WLB 801-006, Rev D; Docking Drawing

Coast Guard Drawing 225B WLB 801-006, Rev G, Docking Drawing

Coast Guard Drawing 225B WLB 901-003, Rev A, Hull Block 901 Block Assembly

Coast Guard Drawing 225B WLB 940-001, Rev E; Hull Block 940 - Modules

Coast Guard Drawing 225B WLB 940-001, Rev E; Hull Block 940 – Panels

Coast Guard Drawing 225B WLB-512-13, Rev A, Galley Supply System Ventilation Modifications B01

Level FR 57-61 (STBD)

Coast Guard Drawing 225B-WLB 233-1, Rev F, Propulsion Train Installation Drawing

Coast Guard Drawing 225B-WLB 243-1, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-2, Rev G, Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 243-2, Rev G; Stern Tube and Bearing a & D

Coast Guard Drawing 225B-WLB 549-1, Rev -, Onboard Lubrication Requirements

Coast Guard Drawing 225B-WLB 556-1, Rev B, Hydraulic System Diagram

Coast Guard Drawing 225B-WLB 556-8, Rev C, CPP Hydraulic System Diagram

Coast Guard Drawing 225B-WLB 562-003, Rev -; Thordon Lower Rudder Stock Bearing

Coast Guard Drawing 225B-WLB 562-004, Rev -; Pintle Bearing

Coast Guard Drawing 225B-WLB 562-2, Rev D, Rudder Structural A & D

Coast Guard Drawing 225B-WLB 573-1, Rev -, Buoy Handling System Arrangement

Coast Guard Drawing 225B-WLB 573-2, Rev -, Weight Handling System Arrangement ix (Rev-3)

Coast Guard Drawing 225B-WLB 611-1, Rev D, Lifting Pads - Main and Aux Machinery Room

Coast Guard Drawing 225B-WLB 111-001, Rev A, Shell Expansion

Coast Guard Drawing 225B-WLB 201-2, Rev C, Access Removal Routes

Coast Guard Drawing 225B-WLB 202-004, Rev C, List of MPCMS Sensors

Coast Guard Drawing 225B-WLB 233-001, Rev F, Propulsion Train Installation Drawing

Coast Guard Drawing 225B-WLB 243-001, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-002, Rev G, Stern Tube and Bearing a & D

Coast Guard Drawing 225B-WLB 243-1, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-2, Rev G, Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 243-2, Rev G; Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 256-001, Rev P; Seawater Cooling Sys Diagram

Coast Guard Drawing 225B-WLB 437-001, Rev B, Tank Level Indicating System Block Wiring Deck

Plan & Elementary Wiring Diagram

Coast Guard Drawing 225B-WLB 505-1, Rev D; General Requirements for Piping Systems

Coast Guard Drawing 225B-WLB 528-8, Rev D Plumbing & Deck Drains A/D, Fr 76, Fwd Abv Mn Dk, Block 960a

Coast Guard Drawing 225B-WLB 528-9, Rev C, Plumbing & Deck Drains A/D, FR-76, Aft Abv Mn Dk, Block 970

Coast Guard Drawing 225B-WLB 532-13, Rev B, Potable Water System A/D, FR-76, Aft Abv Mn Dk

Coast Guard Drawing 225B-WLB 561-001, Rev C, Steering Gear Hydraulic Diagram

Coast Guard Drawing 225B-WLB 561-003, Rev B; Steering Gear Arrangement

Coast Guard Drawing 225B-WLB 561-003, Rev B; STEERING GEAR ARRANGEMENT

Coast Guard Drawing 225B-WLB 561-005, Rev E; Steering Gear Heat Exchanger Replacement

Coast Guard Drawing 225B-WLB 562-001, Rev H; Steering Components A/D

Coast Guard Drawing 225B-WLB 562-001, Rev H; STEERING COMPONENTS A/D

Coast Guard Drawing 225B-WLB 562-001, Rev J; STEERING COMPONENTS A/D

Coast Guard Drawing 225B-WLB 562-002, Rev D; Rudder - Struct A & D

Coast Guard Drawing 225B-WLB 562-002, Rev D; RUDDER - STRUCT A & D

Coast Guard Drawing 225B-WLB 562-003, Rev -; Thordon Lower Rudder Stock Bearing

Coast Guard Drawing 225B-WLB 562-004, Rev -; Pintle Bearing

Coast Guard Drawing 225B-WLB 568-2, Rev A, Stern Thruster Arrangement and Detail

Coast Guard Drawing 225B-WLB 601-001, Rev N, General Arrangements Inboard and

Coast Guard Drawing 225B-WLB 601-001, Rev P, General Arr Inboard And Outboard Profiles

Coast Guard Drawing 225B-WLB 601-1, Rev P, General Arr, Inboard & Outboard Profile

Coast Guard Drawing 225B-WLB 612-001, Rev K, Lifelines, Liferails, and Stanchions

Coast Guard Drawing 225B-WLB 612-1, Rev M, Lifelines, Liferails, & Stanchions

Coast Guard Drawing 225B-WLB 633-002, Rev A, Cathodic Protection Passive

Coast Guard Drawing 225B-WLB 634-1, Rev F, Deck Covering Schedule

Coast Guard Drawing 225B-WLB 644-1, Rev D, Sanitary & Laundry Spaces & Arrgt & Details

Coast Guard Drawing 225B-WLB 801-013, Rev B, Midship Section & Typical Sections

Coast Guard Drawing 225B-WLB 801-015, Rev B, Scantling, Decks, & Platforms

Coast Guard Drawing 225B-WLB 801-016, Rev -, Scantlings, Watertight Bulkheads x (Rev-3)

Coast Guard Drawing 225B-WLB 801-15, Rev B, Scantlings, Decks & Platforms

Coast Guard Drawing 225B-WLB 940-002, Rev E, Hull Block 940 - Modules

Coast Guard Drawing 225B-WLB-167-001, Rev M, Structural Closures

Coast Guard Drawing 225B-WLB-601-001, Rev P, General Arrangements, Inboard and Outboard

Profiles

Coast Guard Drawing 225B-WLB-612-001, Rev M, Lifelines, Liferails & Stanchions

Coast Guard Drawing 225B-WLB-623-001, Rev H, Ladders - Vertical

Coast Guard Drawing 225-WLB 201-2, Rev B, Access Removal Routes

Coast Guard Drawing 225-WLB 202-204, Rev -, Tank Level Indicating System

Coast Guard Drawing 225-WLB 243-001, Rev B; PROPULSION SHAFTING ARRANGEMENT

Coast Guard Drawing 225-WLB 244-203, Rev E, Stern Tube Split Dovetail Carrier Casting

Coast Guard Drawing 225-WLB 256-001, Rev U; Seawater Cooling Sys Diagram

Coast Guard Drawing 225-WLB 505-1, Rev D; General Requirements for Piping Systems

Coast Guard Drawing 225-WLB 561-001, Rev E Steering Gear Hydraulic Diagram

Coast Guard Drawing 225-WLB 561-005, Rev H; Steering Gear Heat Exchanger Replacement

Coast Guard Drawing 225-WLB 583-052, Rev F, Workboat Davit Installation & Related

Coast Guard Drawing 225-WLB 601-001, Rev AC, General Arrangements Inboard and Outboard Profiles

Coast Guard Drawing FL 1204-003, Rev A, Welded Padeyes & Link

Coast Guard Drawing FL 1204-3. Rev A, Welded Padeyes and Links

Coast Guard Drawing FL 2605-031, Rev D, Mechanical Chain Stopper, 1-7/8" Buoy Chain

Coast Guard Drawing FL 2605-034, Rev D, Mechanical Chain Stopper Repair Kit: 1-7/8", 1-5/8" & 1-

1/4"

Coast Guard Drawing FL 7101-573, Rev L, Buoy Chain Winch Assy Model CW1

Coast Guard Drawing FL-1702-11, Rev -, Inspection of Sheaves

Coast Guard Fleet Drawing FL 2804-12, Rev -, U.S.C.G. Emblem

Coast Guard Fleet Drawing FL 2804-22, Rev-, Consolidated Visual ID for Cutters

Modifications

NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight

& Airtight Quick Acting or Individually Dogged Personnel Doors

NAVSEA Drawing 803-5001104, Rev -; Rudder Stock Bearings and Seals

NAVSEA Dwg 803-1385664, Bearings, Stern Tube & Strut

NAVSEA Dwg 803-2145807, Propulsion Shafting & Components

Outboard Profiles

COAST GUARD PUBLICATIONS

«REF_A»

«TECHPUBS»

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual

Coast Guard Drawing 225B WLB 633-001, Rev B, Cathodic Protection System Arrangement, Block

Diagram, Wiring Deck Plan, and Elementary Diagrams

Coast Guard Technical Publication (CGTP) 3555, SWBS 561, Section A, Jan 2021, Steering Gear

System- Model 990192-1 xi (Rev-3)

Coast Guard Technical Publication (TP) 10512, Section 573-A, July 2018, Buoy Handling Crane – Model

EB600-60-40

Coast Guard Technical Publication (TP) 11101, SWBS 583, Section A (SWBS 583A), Davit, Single Point

Slewing Arm Model - RAD30 - 15.5 (BMD-710)

Coast Guard Technical Publication (TP) 3498, Section A, Jul 2015, Buoy Chain Winch

Coast Guard Technical Publication (TP) 3518, Oct 2007, MDE Model 3608/1

Coast Guard Technical Publication (TP) 3523, Apr 2002, SWBS 241-A, Reduction Gear - Model

96DHCMG-Cp

Coast Guard Technical Publication (TP) 3523, SWBS 241-B, Nov 2007, Reduction Gear - Model

96DHCMGH-CP

Coast Guard Technical Publication (TP) 3523-241-A&B, 225 WLB MIB, VOL 5, SWBS 241, GEAR, REDUCTION, MMC PN 241-01-01

Coast Guard Technical Publication (TP) 3523-242-A-C, 225 WLB MIB, SWBS 242, Coupling, Torsional, MMC PN 242-01-01 & 242-01-02

Coast Guard Technical Publication (TP) 3524, 2013, Manufacturer's Instruction Book-SWBS Group(s)

243-262

Coast Guard Technical Publication (TP) 3524, 07-JAN-97, Manufacturer's Instruction Book-SWBS

Group(s) 243-262

Coast Guard Technical Publication (TP) 3524, May 2009, Manufacturers Instruction Book, SWBS

Group(s) 243-262, 225’ WLB Class Cutters, SWBS 243, Section A, Seal, Forward Stern Shaft, Manufacturer: John Crane, Model NO. MB Series, Rev. 1

Coast Guard Technical Publication (TP) 3524, SWBS 245-A, Apr 2000, Instruction Manual for the

Model 102 A Class Controllable Pitch Propeller and Shafting System

Coast Guard Technical Publication (TP) 3524, SWBS 245-B, Aug 2005, Instruction Manual for the

Model 102 B Class Controllable Pitch Propeller and Shafting System

Coast Guard Technical Publication (TP) 3524, SWBS 245-B, May 2009, Propeller System, CPP - Model

110251007

Coast Guard Technical Publication (TP) 3524-244-A, 225 WLM MIB, SWBS 244-A, Bearing, Line

Shaft, MMC PN 244-01-03, TP 244-A

Coast Guard Technical Publication (TP) 3524-245-A&B, 225 WLB, SWBS 245-A & 245-B, Propeller

System, CPP, MMC PN 245-01-01,, 0

Coast Guard Technical Publication (TP) 3527B, Manufacturer's Information Book – SWBS Group(s) 310

Coast Guard Technical Publication (TP) 3534A_SWBS 324_A, Switchboards, Ship Service and

Emergency Diesel Generator – Model D213041-M1.

Coast Guard Technical Publication (TP) 3537B, Manufacturer's Instruction Book – SWBS Group(s) 310

Coast Guard Technical Publication (TP) 3555, 21-May-1996, Steering Gear Systems

Coast Guard Technical Publication (TP) 3556, Jul 2020, SWBS 568, Section E, Bow and Stern Thruster –

Model 125/3 STAY/FP

Coast Guard Technical Publication (TP) 3556, Manufacturer's Instruction Book – SWBS Group(s) 568

Coast Guard Technical Publication (TP) 3558, Apr 2008, Manufacturer’s Instruction Book-SWBS

Group(s) 573, Section B, Cross Deck Winch – Model BMD-471

Coast Guard Technical Publication (TP) 3559, SWBS 581B, Anchor Windlass, P/S - Model BMD-478

Coast Guard Technical Publication (TP) 3559, Section 582B, Apr 2009, Aft Capstan, 21” - Model BMD-xii (Rev-3)

Coast Guard Technical Publication (TP) 3562, Sep 2013, SWBS 589, Section C, Dumbwaiter, Model –F-

WK-806

Coast Guard Technical Publication (TP) 3574, Mar 2009, SWBS Group 633-638

Coast Guard Technical Publication (TP) 3574, May 1996, Manufacturer's Instruction Book-SWBS

Group(s) 633-638

Coast Guard Technical Publication (TP) 3717, Jun 2003, Hydraulic Cargo Hatch

Coast Guard Technical Publication (TP) 3720, 01-AUG-2024, Single Point Slewing Arm Davit Model

RAD30 – 15.5, Operation, Maintenance, & Repair Instructions, Appleton Marine

Coast Guard Technical Publication (TP) 3749, 26-APR-05, 1-7/8 Inch ATON Mechanical Chain Stopper

Coast Guard Technical Publication (TP) 3750, SWBS 573-A, Dec 2012, Rising Sheave Chain Stopper

Coast Guard Technical Publication (TP) 3796, Section A, Aug 2006, Galley Hood – Model NBDL-60

(13’-4”)

Coast Guard Technical Publication (TP) 5029, 01-NOV-03, S9243-Bx-MMC-010 - Bulkhead Shaft Seal

Coast Guard Technical Publication (TP) E-424-006, Version WLB97-1, Wesmar 3060-08/M-8/AC

Forward Scan Sonar

Fire Prevention and Response

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0000, 2022, General

Requirements

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0450, 2022, Electrical Power for

Contractor’s Tools & Equipment

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3042, 2022, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3100, 2022, Inspect, Test and

Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Jan 2022, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), 2022, Electrical

Power for Contractor’s Tools & Equipment

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), 2022, Electrical

Power for Contractor's Tools & Equipment

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), Latest Version, Electrical Power for Contractor’s Tools and Equipment.

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Requirements for Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Jan 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes xiii (Rev-3)

Surface Forces Logistics Center Standard Specification 0850 (SFLC Std Spec 0850), Jun 2022, General

Requirements for Drawing Preparation

Surface Forces Logistics Center Standard Specification 3020 (SFLC Std Spec 3020), 2022, Overhaul AC

Electrical Motors

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard

Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2022, Inspect, Test and Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2014, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2022, Clean

Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), 2022, Fire

Prevention and Response

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Preserve Ship

Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ships Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install Interior

Deck Covering Systems

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install New

Deck Covering Systems

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), Latest Revision, Install New Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2022, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2022, Temporary

Services

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), Latest Revision, Temporary Serv

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2022, Temporary

Hull Accesses xiv (Rev-3)

OTHER REFERENCES

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Rev 7; Near-White Blast Cleaning

«OTHERREF»

A-A-59323, Rev -; CLOTHS, CLEANING, LOW-LINT , 6/30/99

American Bureau of Shipping (ABS) Approved Chain, Accessory and Bar Manufacturing Facilities List, Oct 2016

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2011, Disinfection of Water-Storage Facilities

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2019, Disinfection of Water-Storage Facilities

American National Standards Institute/National Electrical Manufacturers Association (ANSI/NEMA) AB

4, Mar 2011, Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit

Breakers Used in Commercial and Industrial Applications

American National Standards Institute/NSF International (ANSI/NSF) 61, 2008, Drinking Water System

Components - Health Effects

American National Standards Institute/NSF International (ANSI/NSF) 61, 2015, Drinking Water System

Components - Health Effects

American Society for Testing and Materials (ASTM) International F1508, 2016, Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

American Society of Mechanical Engineers (ASME) B16.34, 2017, Valves-Flanged, Threaded, and

Welding End

ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2015, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by Tape

Test

ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

ASTM International (ASTM) D5363, 2008, Standard Specification for Anaerobic Single Component

Adhesives (An)

ASTM International (ASTM) D5363, 2008, Standard Specification for Anaerobic Single Component

Adhesives (AN)

ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN)

ASTM International (ASTM) F992, 2017, Standard Specification for Valve Label Plates

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual

Code of Federal Regulations (CFR) Title 29, Part 1910, Occupational Safety and Health Standards

Code of Federal Regulations (CFR) Title 29, Part 1915, 2014, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, 2022, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment xv (Rev-3)

Code of Federal Regulations (CFR) Title 40, Protection of the Environment

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Anti-seize, Zinc Dust-

Petrolatum

Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting

Commercial Item Description (CID) A-A-59588, 2013, Rubber Silicone

Commercial Item Description (CID) A-A-59588, Jul 2005, Rubber Silicone

Commercial Item Description (CID), A-A-59323, Mar 2005, Cloths, Cleaning, Low-Lint

Commercial Item Descriptions (CID) A-A-59323, Rev A; Cloths, Cleaning, Low-Lint

Federal Specification (Fed Spec) RR-C-271, Rev E, Dec 2010, Chain and Attachments, Welded and

Weldless

Federal Specification (Fed Spec) RR-C-271, Rev E, Mar 2016, Chains and Attachments, Carbon and

Alloy Steel

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2013 Edition, Pressure Testing Of Steel Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2019 Edition, Pressure Testing Of Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2017 Edition, Butterfly Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2018 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2013 Edition, Bronze Gate, Globe, Angle and Check Valves

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2019 Edition, Bronze Gate, Globe, Angle and Check Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS), SP-58, 2018, Pipe

Hangers and Supports – Materials, Design, Manufacture, Selection, Application and Installation

MIL PRF-16173, Sep 2006, Corrosion Preventive Compound, Solvent Cutback, Cold-Application

MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418)

MIL-A-22262, Mar 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-A-22262, Mar 1996; Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-A-46106, Jun 1992, Adhesive-Sealants, Silicone, Rtv, One-Component

MIL-C- 24643/16, Low Smoke Shipboard Cable

MIL-C-24633, Oct 2014, Chain, Stud Link, Anchor, Low Alloy Steel, Flash Butt Welded

MIL-D-18873, Jul 1982, Deck Covering Magnesia Aggregate Mixture

MIL-D-21631, Dec 1990, Deck Covering, Latex Concrete

MIL-D-23134, Jul 1999, Deck Underlay and Covering, Insulating, Magnesia Aggregate Mixture

MIL-DTL-23549, Sep 2016, Grease, General Purpose

MIL-I-3064, Mar 1991, Insulation, Electrical, Plastic-Sealer

Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-PRF-16173, 2006, Corrosion Prevention Compound, Solvent Cut-Back, Cold-Application

MIL-PRF-16173, Sep 2006, Corrosion Preventive Compound, Solvent Cutback, Cold-Application

MIL-PRF-24176 , Oct 2004, Cement, Epoxy, Metal Repair And Hull Smoothing (Metric) xvi (Rev-3)

MIL-PRF-24176, 2004, Cement, Epoxy, Metal Repair and Hull Smoothing (Metric)

MIL-PRF-24613, Dec 1990, Deck Covering Materials, Interior, Cosmetic Polymeric

MIL-PRF-24647, 2013, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24647, Jan 2018, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-3135, Nov 1986, Deck Covering Underlay Materials

MIL-PRF-9000, Rev H; Lubricating Oil, Shipboard Internal Combustion Engine, High Output Diesel, 9/16/87

MIL-S-22473 , Rev E(8); Sealing, Locking, and Retaining Compounds: (Single Component), 01/21/04

MIL-S-45180, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

MIL-S-45180, 1998; Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

MIL-STD-1689, Nov 1990, Fabrication, Welding and Inspection of Ships Structure

MIL-STD-2003-3, Sep 2009, Electric Plant Installation Standard Methods for Surface Ships &

Submarines (Penetrations)

Naval Sea Systems Command (NAVSEA) S9243-AW-TRS-011, Surface Ships Main Propulsion Shafting

Refurbishment Procedures, Volume I, Part 1

Naval Sea Systems Command (NAVSEA) S9243-AW-TRS-012, Surface Ships Main Propulsion Shafting

Examination, Test and Repair Action Record, Volume 1, Part 2

Naval Sea Systems Command (NAVSEA) Underwater Ship Husbandry Manuals (UWSH) S0600-AA-

PRO-160, Nov 2011, Chapter 16, Cofferdams

Naval Sea Systems Command (NAVSEA) Underwater Ship Husbandry Manuals (UWSH) S0600-AA-

PRO-160, Nov 2011, Chapter 16, Cofferdams

Naval Ship's Technical Manual (NSTM) Chapter 634, Dec 2001, Deck Covering

Naval Ships' Technical Manual, Chapter 241, Propulsion Reduction Gears, Couplings, Clutches, and

Associated Components

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure

ODOM Echotrac DF3200 MKII, Rev 2, Technical Manual

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032, 2014, Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032, 2022 Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

Society of Automotive Engineers (SAE) AMS-G-6032, August 2012, Grease, Plug Valve, Gasoline and

Oil Resistant, NATO Code Number G-363, Metric

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 1 (SSPC-SP 1), 2016, Solvent Cleaning xvii (Rev-3)

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 11 (SSPC-SP 11), 2007, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2015, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), Solvent

Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2004, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2012, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2012, Power-Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), Power

Tool Cleaning)

The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC), January 2015, Paint Application Specification No. 2 (PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC), Paint Application Specification No. 2 (PA-2), Procedure for

Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No.2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 12/NACE No.5, 2002, Surface Preparation and Cleaning of Metals by

Waterjetting Prior to Recoating

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 6/NACE No. 3, 2007, Commercial Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 7/NACE No.4, 2007, Brush-Off Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning xviii (Rev-3)

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-2/NACE WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough

Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-4/NACE WJ-4, 2012, Waterjet Cleaning of Metals – Light Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP

10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation

Standard SSPC-SP 12/NACE No. SSPC-SP 12/NACE No.5, Surface Preparation and Cleaning of

Steel & Other Hard Materials by High and Ultrahigh Pressure Water Jetting Prior to Recoating

The Society for Protective Coatings (SSPC)-SP 3, Power Tool Cleaning, 11-1-2004

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Jan 2007, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 11, Jul 2012, Power Tool Cleaning to Bare Metal

Underwriters Laboratories Inc. (UL) 1066, Low-Voltage AC and DC Power Circuit Breakers Used in

Enclosures, Aug. 2022 xix (Rev-3)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED

COST

($/UNIT)

21 N 225' WLB Major

Overhaul Kit

NSN: 5330-01-520-5284 1 ea. 35,249.00

21 N **225' WLB Seat

(Split)

NSN: 5330-01-645-3665 1 ea. 12,500.00

21 Y *Seal Compression

Tool

Onboard Tool 1 ea. 200.00

22 N **Oversized shaft seal diaphragm (Main Prop

Shaft)

NSN: 2010-01-537-2301 2 ea. 9,828.00

22 N **Oversized shaft seal diaphragm (PTO shaft)

PN: H74265-01-3 1 ea. 4,250.00

22 N **Entire New Seal

(Main Prop Shaft)

NSN: 2040-01-393-7061 2 ea. 18,883.00

27 N Stat-O-Seal Washers NSN: 5310-01-212-5987 PN:

0-4-3-5

12 ea. 55.61

27 N O-Ring, Hub Flange

Bolt Cover

NSN: 5331-00-983-9878 PN:

0-2-2-5

12 ea. 50.00

28 Y **Blade Bolts NSN: 5306-01-410-6893 4 ea. 1,854.12

28 N Blade Bolt O-rings NSN: 5330-01-408-7251 PN:

0-3-2-1

48 ea. 2.25

28 N Blade Seal NSN: 5331-01-623-0621 PN:

2-472 KA174-75

4 ea. 55.00

28 Y *Lifting Device, Propeller Blade

NSN: 2020-01-F02-6825 1 ea. 100.00

36 N *** Fathometer

Transducer, shallow water, 50-200 kHz

(Airmar Technology

SS505)

NSN: 5845-01-518-7231 PN:

SS505

2 ea. 343.63

36 Y ***Fathometer

Transducer, Deep

Water, 24kHZ

NSN: 5845-01-496-9770 PN:

TH28/20-41-516CG

1 ea. $7,709.21

52 N **Upper bearing NSN: 3110-01-466-9924 1 ea. 10,525.45

52 N Rudder Seal Kit NSN: 5330-01-565-8083 1 ea. 2,433.76

53 N Lower bearing NSN: 3120-21-912-7635 1 ea. 6,661.26

53 N Pintle bearing NSN: 3120-21-912-7634 1 ea. 3,380.38

54 N Seal Kit, Thruster NSN: 2010-01-555-9048 2 ea. $4,280.00

54 N **Seal Spacer NSN: 5365-01-495-6823 2 ea. $700.00

54 N **Shaft Sleeve NSN: 2010-01-495-2638 2 ea. $5702.40

56 N Repair Kit, HYD Chain

Stopper Rising Sheave

(for Para. 3.2, Tasks #2

NSN: 2040-01-483-3947 2 ea. 2,631.46 xx (Rev-3) and #3)

56 N Cylinder, Actuating

Linear

NSN: 3040-01-483-3373 2 ea. 1,777.71

57 N Hand Pump SS NSN: 4320-01-517-1444 1 ea 1,499.66

57 N Pressure Gauge -

Model BMD-471

NSN: 6685-01-437-2519 4 ea 43.79

57 N Wire Rope Assembly NSN: 4010-01-643-2077 4 ea 900.00

57 N Hydraulic Brake

Repair Kit - Model

BMD-471

NSN: 3950-01-526-9090 4 ea. 913.00

57 N Counterbalance Valve -

Model BMD-471

NSN: 4810-01-353-0586 4 ea. 150.00

57 N Shuttle Valve - Model

BMD-471

NSN: 4820-01-317-2748 4 ea. 35.00

57 N Hydraulic Motor Seal

Kit - Model BMD-471

NSN: 5330-01-475-4566 8 ea. 84.00

57 N Clutch Shoe - Model

BMD-471

NSN: 4910-01-475-4125 4 ea. 56.90

57 N Drum Bushing - Model

BMD-471

NSN: 3950-01-631-0884 8 ea. 272.00

57 N Shaft Bushing - Model

BMD-471

NSN: 3950-01-631-0771 4 ea. 298.00

57 N Gearbox Seal Kit (For

Winch Gearbox

Assemblies) - Model

BMD-471

NIIN: XFC343225 PN: YMD-

8194-R

4 ea. 70.00

57 N Control Station Repair

Parts. Kit

NSN: 6110-01-644-9898 4 ea. 438.00

57 N Flag Block Pivot

Bearing

NSN: 3110-01-644-9905 4 ea. 675.00

57 N Flag Block Bearing

Cup, Sheave

NSN: 3110-01-644-9670 4 ea. 231.00

57 N Flag Block Bearing

Cone, Sheave

NSN: 3110-01-013-4036 4 ea. 182.00

57 N Seal NSN: 5330-01-287-2826 4 ea. 104.00

57 N Manifold Repair Kit PN: YMD-8192-R 4 ea. 551.00

58 N Roller bearing Unit NSN: 3130-01-504-4363 2 ea. 4,012.00

58 N Grease seal NSN: 5330-01-462-5544 4 ea. 79.25

58 N Level wind pivot bushing

NSN: 3120-01-621-2293 1 ea. 1,139.00

58 N Level wind thrust bearing

NSN: 3120-01-621-2300 2 ea. 483.30

58 N Rexroth DCV NSN: 4810-01-507-0037 1 ea. 208.29

58 N Rexroth Sandwich

Flow Control

NSN: 4810-01-505-9289 1 ea. 250.00

58 N Sun Sandwich Relief

Valves

NSN: 4820-01-439-2451 2 ea. 900.00

58 Y Level Wind Hydraulic

Cylinder

NSN: 3040-01-441-3721 1 ea. 7,423.00 xxi (Rev-3)

58 N 3:1 Pilot Ratio, Vented

Counterbalance Valve

Assembly

NSN: 4820-01-563-5841 1 ea 98.70

58 N Fully Adjustable

Needle Valve

NSN: 4820-01-416-0579 1 ea 48.75

58 N Wire Rope Assembly NSN: 4010-01-646-6972 1 ea. 500.00

58 Y **Hydraulic Motor NSN: 4320-01-445-2248 1 ea 23,998

58 N **Pump, Hydraulic

Ram, Hand Driven

NSN: 4320-01-286-4065 1 ea. 419.77

58 N **Cylinder Pin NSN: 5315-01-515-9847 1 ea 500.00

58 N **Cylinder Pin NSN: 5315-01-515-9912 1 ea 520.00

59 N Hardware Kit, Pins NSN: 2030-01-485-7209 2 ea. 528.47

59 N Hardware Kit, Mechanical

NSN: 2030-01-485-7215 2 ea. 538.91

67 N Swing Brake Seal Kit NSN: 5330-01-390-3514 PN:

90-016-2011

2 ea 68.45

67 N Swing Brake Disc Kit NSN: 3010-01-464-1040 PN:

90-016-2131

2 ea 187.20

67 N Swing Holding Valve NSN: 4820-01-466-4918 PN:

CBEA-LHV-YHL (Sun

Hydraulics)

1 ea 251.50

67 N Wire Rope Assembly NSN: 4010-01-620-9604 PN:

JWCG062100PL

1 ea 660.00

68 N 4 Year Davit In-Place

Overhaul Kit

NSN: 3950-01-F18-5354 PN:

892-02053

1 ea. 124,229.92

68 N Hook, Release, Boat

Davit

NSN: 4030-01-467-1005 PN:

APR-356-CBH

2 ea. 4,340.00

70 N Main Fall Wire Rope NSN: 4010-01-486-0047 PN:

JWCG13001919PL

1 2,642.00

70 N Aux Fall Wire Rope NSN: 4010-01-594-2228 PN:

JWCG75200637PL

1 805.32

83 N Reference electrode, silver & silver chloride

Siemens Water

Technologies

W3T105012

(Electrocatalytic

32622)

NSN: 5977-01-346-0750 2 ea. 1,300.02

83 Y *Transducer Cover

Plate

N/A 4 ea. 50.00

93 N example: 30 in. x 30 in.

Quick-Acting

Watertight Hatch, Steel, (Raised 12 in…