Attachment 2 - Specification Response Matrix.pdf

N6426725Q5007

Specification Item Specification Parameter Offeror Response

070-1 Enter Length Overall (LOA) including appendages: xx.xx ft 070-1 Enter Hull Length (Lhull) : xx.xx ft [Shall be no greater than 25 ft per

Section 042] 070-1 Enter Beam Overall (BOA): xx.x in [Shall be less than or equal to 120 inches per Section 084] 070-1 Enter Chine Beam: xx.x ft 070-1 Enter Height, Keel to Fixed Structure: xx.x ft 070-1 Enter Height, Keel to Moveable Structure: xx.x ft 070-1 Enter Height on trailer when rigged for transport [Shall be less than or equal to 162 inches per Section 084]: xx.x ft 070-1 Enter Width on trailer when rigged for transport [Shall be less than or equal to 120 inches per Section 084]: xx.x ft

ATTACHMENT 2

SPECIFICATION RESPONSE MATRIX

NOTES & INSTRUCTIONS:

Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).

1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.

2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.

3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).

NIWC

25-FOOT MARINE MAMMAL

DRAFT

N6426725Q5007

Specification Item Specification Parameter Offeror Response

070-1 Enter Height from waterline to fixed structure: xx.x ft [Shall be less than or equal to 12 ft]

070-1 Enter Deadrise at midships: xx degrees 070-1 Enter Deadrise at transom: xx degrees 070-1 Enter Total Installed Fuel Capacity: xxx gallons 070-1 Enter Full Load Weight: (as defined in Section 070): xx,xxx lbs incl x% construction or build margin or both 070-1 Enter LCG in Full Load: xx.x ft forward of the transom/keel intersect

070-1 Enter Static Draft (hull): xx.x ft 070-1 Enter Static Draft (ouboards): xx.x in [Shall be notionally less than

30 in per Section 042] 070-1 Enter Cruise Speed: xx knots at Full Load in calm water [Shall be greater than 30 knots per Section 050] 070-1 Enter Sprint Speed: xx knots at Full Load in calm water [Shall be greater than 35 knots per Section 050] 070-1 Enter Range: xx.x NM with 10% usable fuel reserve at 30 knots and

Full Load Condition in Wilbur Marks Sea State 2 [Shall be at least 150 NM per Section 050]

084-3 Enter Highway Trailer Make and Model;

100-1 General Requirements for Hull Structure - Provide a name and short description of structural methodology.

166-1 Collar - Provide a description of collar design and identify foam materials.

236-2 Outboard Engines - Identify Model and horsepower 313-1 Batteries - Identify Model and Quantity 313-4 Shore Power Batteru Charger - Identify Model and Quantity

Offeror's Notes : DRAFT