Attachment 2 - SEN RTCH Equipment List.pdf

Appendix A: Equipment and Training Requirements List

LINE

# 0BITEM 1BSPECIFICATION/DESCRIPTION UNIT OF

ISSUE 2BQTY

Rough Terrain Container Handler (RTCH)

• Container handler: 56,000lb (25,400kg) Capacity

• Folding boom (patented) to allow conversion from operational mode to transportation mode without disassembly, special tools, or lifting assets.

• Deployable on C-5, C-17, and Antonov 124.

• Ability to stack 20’ and 40’ containers three high and two rows deep

• Durable with capacity to operate on rough terrain, water, and in extreme temperatures with side shifting, rotation, slewing, forward/rear/left/right tilting

• Transportable, versatile with material handling, and able to operate in unimproved, rough terrain surfaces in harsh conditions

• Engine; Cummins, 400HP

• Four Point Sling rated to 40,000 lbs (18,143 kg)

• Max Lift Ht: 33’8”;

• Max Reach: 20’7”;

• Travel speed: 23/15 mph un/loaded (37 km/h, 24 km/h);

• Gradeability: 27% loaded/unloaded;

• Fording Depth: 3’ (914 mm)

EA 1

2 20 Ft Top Handler Heavy Duty Top Loader Container Handler EA 1

3 Sling Lift Attachment

Rated to allow movement of 48,000lbs (21,770 kg), allowing versatility of load handling EA 1

4 Forklift Attachment

Rated to lift capacity of 44,000lbs to give operator ability to lift or load a wide variety of cargo EA 1

5 Authorized Stocking List Kit

Provides service parts and filters to perform preventive maintenance and services throughout the first 2000 hours of operation.

KIT 1

6 Basic Issue Item Kit KIT 1

Hydraulic Reservoir Wrench EA 1 Jacking screws LOT 1 3/16 long arm hex key wrench EA 1 Phillips Screwdriver (Standard, round, 8) EA 1 Cresent Wrench EA 1 Air Pressure Gauge EA 1 Slip joint Pliers EA 1 Tool Pouch (18 in, black, vinyl) EA 1

Appendix A: Equipment and Training Requirements List

7 Breakout Cable Kit

Used to troubleshoot the pressure and temperament sensors, electronic control module (ECM), and engine harness.

KIT 1

8 Additional Items

Parts that historically have tendency to break down, require long lead times, or will cause abrupt work stoppage. Special tools unique to the RTCH.

(Contractor may recommend additional items in in their technical proposal.)

Tires EA 2 Alternator EA 1 Brakes EA 2

Special Tools [Note: To be determined (TBD) contractor may specify tools nomenclature, description, quantity, and cost in the proposal].

TBD

New Equipment Training (NET) Description Students Hours

Operator Training

At a minimum, training shall provide basic knowledge on how to safely operate the RTCH.

Training shall include safety and operational techniques to handle and manipulate 20’/40’ containers through a wide range of scenarios; proper inspection, maintenance, lubrication procedures to keep the RTCH operational; and an introduction to different transportation modes of the RTCH. Target training audience should be SAF equipment operators, RTCH operators, logistics (transportation and supply) and SAF deployment planners.

20 80

Field Maintenance Training

Training shall provide trainees with the basic knowledge and skills to troubleshoot, repair, and maintain the RTCH. The course should cover safety, hydraulic systems, mechanical systems, and engine systems. Training shall include explanation of Warranty and requisitioning replacement parts as well as proficiency utilizing Operator and Maintenance Technical Manuals. Target training audience should be heavy equipment mechanics and maintenance officers.

20 80

ITEM