Attachment 2 Schedule of Supplies.pdf

Source Selection Information – FAR 2.101 and 3.104

Attachment 2-Schedule of Supplies

Salient Characteristics-

BRAND NAME or Equal: Mereen-Johnson. – SEE BELOW

PACKAGING TEXT:

SHALL BE PACKAGED STANDARD IN ACCORDANCE WITH ASTM D 3951.

NOTES:

All prices must be rounded to two decimal places. Please pay special attention to FAR 52.212-3 Evaluation – Commercial Items and its addenda.

Please pay special attention to FAR 52.211-6—Brand Name or Equal and

ARE YOU QUOTING THE BRAND NAME ( ) YES ( ) NO

If NO, brand name (manufacturer and model number) being offered

For all products being offered please provide:

Name of manufacturer ____________________

Place of Manufacturer ____________________

Manufacturer’s Address ____________________

Manufacturer’s Cage Code ______________

The machine must be equal to or greater than the below listed gang rip saw:

1 EA Manufacturer Mereen-Johnson model 312-DC

Salient Characteristics:

• 208 volt, 3 phase, 60 cycle electrical operation

• Capacity: 12” arbor space; up to 3-1/2” thickness, 30” minimum length glue joint accuracy, 22” minimum length bust up only. Left side open for wide panel acceptance

• Arbor Drive: Soft Start 50 HP 3600rpm TEFC direct arbor drive

• Feed Drive: 3 HP TEFC Posi-Friction feed bed with 5” pitch V chain. Extruded Aluminum feed slats with replaceable steel backed rubber insert strips. .30 – 235 FPM feed speed control

• Hold Downs: 4ea 3” diameter air loaded press rolls

• Bed Plate: Full width spring loaded bed plate

• Outfeed Table: Omni Gravity Roll Conveyor with 3-1/2” idler rollers on 16” centers with 36” width, 16’ long

• Saw Sleeve: 12” capacity arranged for 10” to 14” diameter X 3-1/8” bore tooling (include 1 set of saw spacers)

• Dust Collection Points: 1ea 8” 1ea 5” upper and 1ea 5” lower connection 3110 CFM total air movement

• Anti-Kickback Safety Device: Single Bottom and Double Upper infeed and Single Bottom outfeed

• Mechanical arbor door lock and air actuated arbor brake integrated to arbor rotation sensor

• Electrical Cabinet door lock interlock when machine power is on

• Additional 12” removable clamp-up type saw sleeve (1ea)

• Additional set of saw spacers for clamp-up type saw sleeve (1 set)

• Each Saw Sleeve to be keyed, each spacer set to have keyway cut to accept sleeve key

• Powered vertical arbor adjustment

• Machine Mounted laser rack alignment system with each laser mounting bracket able to be manually adjusted

• 12ea 12” x .160” x 3-1/2” bore saw blades for clamp up sleeve

• Power adjustable press roll

• 1ea additional bed plate bundle consisting of 12 6” segments and 2 5” segments

• 2ea Twist Lock saw collars

• 2ea Saw Guided hold down shoe

• 12ea 12” x .160” diameter saw blades for Twist Lock saw collar

• Fiberglass sound enclosure with press roll and motor enclosure access doors hinged. Press Roll enclosure to have gas cylinder lift assist

• Swing Arm and saw sleeve tip-up cart:

CLIN 0001

Manufacturer

Quantity 1 EA @