Attachment 2 - Salient Characteristics TMO Woodshop and Supplies CAO 7 Sep 26.pdf
PDF 141 KB Posted
- Attached to
- TMO Office Equipment and Supplies
- Solicitation number
- FA470426Q7010
About this file
This is a salient characteristics memorandum from TMO (Transportation Management Office) to CONS (Contracting) outlining full delivery requirements for TMO operation supplies and woodshop equipment to 346 EABS at Aponte AB in Carolina, Puerto Rico, with air shipment preferred over vessel transport.
The woodshop equipment requirements include major machinery: a 10-foot vertical panel saw with worm drive, 17-inch 2 HP bandsaw with cast-iron trunnion, 20-inch floor drill press with LED and laser guide, 80-gallon 5 HP extreme series air compressor, heavy-duty mobile base (1000 lbs capacity), two 1.5 HP portable dust collectors, dust collection kit with hoses and fittings, four single roller stands, 15 amp 12-inch dual bevel sliding miter saw, foldable mobile miter saw stand, 18V lithium-ion brushless cordless combo kit with five tools and two 5.0 Ah batteries, two 18-volt 6.0 Ah battery packs, two pneumatic 21-degree 3.5-inch round head framing nailers, two 30-degree cordless framing nailers, 46-inch nine-drawer mobile workbench cabinet, five 3/8-inch by 50-foot hybrid air hoses, framing nails in two sizes (3,000 and 3,000 boxes respectively), two 16-inch by 24-inch laser-etched framing squares, two 7-inch laser-etched aluminum rafter squares, two 12-inch wonder bar pry bars, two 100-foot bold line chalk reels, two 22 oz. milled face framing hammers, two 21-piece black and gold twist drill bit sets, one 45-piece impact duty screw driver bit set, and two six-piece trigger clamp sets. Additional equipment includes 40 pieces each of various lumber grades, 20 pieces each of pressure-treated plywood in three sizes, stencil machine with oil boards and black spray ink, 10-inch 2 HP cabinet saw with sliding table attachment, three 36-inch drum fans, and one single-sided 82 by 61 by 120-inch cantilever rack with 9,730 lbs capacity and eight 1,000 lbs-capacity arms.
TMO supplies encompass material handling and packaging equipment: three plastic platform trucks (2,000 lbs capacity), three industrial pallet trucks (5,500 lbs capacity), one 20-gallon flammable storage cabinet (red, wall-mount, 350 lbs shelf capacity), one polypropylene strapping machine, two nine by eight-inch core machine strapping rolls, one industrial strapping cart, one automatic sealless combo polystrapping tool with 18V lithium-ion battery (handles 800 seals per charge), three five-eighths-inch by 0.025-inch by 6,000-foot black polystrapping rolls, two replacement 18-volt 4.0Ah batteries, one high tensile strapping tools and cart offer for 5/8-inch steel strapping, three five-eighths-inch standard grade steel strapping rolls, one 4-drum spill containment workstation, one universal 50-gallon mobile spill kit with specified contents, two 72 by 24 by 72-inch black wire shelving units with four shelves each, one label maker with Bluetooth and USB connectivity, two one-inch black on yellow label tape rolls (314 inches each), six 20-inch by 6,000-foot cast machine length stretch films (80 gauge, black opaque), six 20-inch by 6,000-foot blown machine length stretch films (70 gauge), two double-tier industrial lockers, one Pure Flow 1000 eyewash station with 15-minute flow, one replacement 24-month saline cartridge, one semi-automatic stretch wrap machine with built-in scale and 4,000 lbs capacity, one 67 by 46 by 4-inch ramp for the stretch wrap machine, one 144 by 48-inch jumbo industrial packing table with laminate top, one two by four-foot anti-static vinyl table mat, one 30-inch foot-operated impulse sealer, two 36-inch by 200-yard static shielding rolls, and one half-inch by 36-yard ESD tape roll.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
From: TMO
To: CONS
Salient Characteristic:
1. The Government requests delivery of full TMO operation supplies and TMO Woodshop equipment to 346 EABS at Aponte AB, PR // Address: 200 Jose A Tony Santana Ave, Carolina, PR 00979
a. Requesting items to be shipped via air not vessel if applicable.
Items needed for Woodshop:
1) 10' Vertical Panel Saw with Worm Drive - 64" Crosscut- Qty-1
a. Dimensions: 124" x 17" x 92"
b. Crosscut: 64"
c. Rip cut: Unlimited
d. Cut Depth: 1-3/4"
e. Frame length: 120"
f. Saw blade diameter: 8"
g. Motor amps and volts: 13 amps, 120V
h. 3 hp worm driven heavy-duty saw motor
2) 17" 2 HP Bandsaw w/ Cast-Iron Trunnion - Qty-1
a. Motor: 2 HP, 110V/220V (prewired 220V), single-phase, 19A/9.5A
b. Throat (max. width left of blade): 16-1/4"
c. Resaw capacity: 12"
d. Blade size: 131-1/2" long
e. Blade width range: 1/8"–1" wide
f. Blade speeds: 1700, 3500 FPM
g. Table size: 23-5/8" x 17-1/4"
h. Table tilt: 5° left, 45° right
i. Floor to table height: 37-1/2"
j. Footprint: 27" W x 18" D
3) 20" Floor Drill Press w/ LED & Laser Guide - Qty-1
a. Motor: 2 HP, 120V, single-phase, 12.9A
b. Swing: 20-1/4"
c. Spindle taper: MT#3
d. Spindle travel: 4-3/4"
e. Spindle speeds: 12, 180-3550 RPM
f. Drill chuck: JT3 keyed, 5-20mm
g. Drilling capacity: 1-1/8" Mild steel
h. Maximum distance from spindle to table: 25-5/8"
i. Table dimensions: 16-3/4" x 18-3/4"
j. Table tilt: 0-45° L/R
k. Table swivel around column: 360°
l. T-slots (x3): 15mm
4) 80-Gallon 5 HP Extreme Series Air Compressor - Qty-1
a. Motor: 5 HP, 230V, single-phase, 22.5A
b. Tank size: 80-Gallon
c. Airflow capacity: 18.5 CFM at 90 PSI and 24 CFM at 40 PSI
d. Maximum air pressure: 175 PSI
5) Heavy-Duty Mobile Base - Qty-1
a. Adjusts from 20" x 20" to 29-1/2" x 29-1/2"
b. Capacity: 1000 lbs.
c. Must Fit Floor Drill press
6) 1-1/2 HP Portable Dust Collector - Qty-2
a. Motor: 1-1/2 HP, 120V/240V (prewired for 120V), single-phase, 12A/6A
b. Air suction capacity: 1300 CFM
c. Static pressure: 9"
d. Impeller: 12-3/4" cast aluminum
e. Collection capacity: 42.6 gallons (5.7 cu. ft.)
f. Upper bag filtration: 2.5 micron
g. Bag size (dia. x depth): 19-1/2" x 33" (2)
h. Powder coated paint
i. 2.5 Micron upper bag filtration
j. Steel base with casters for mobility
k. 6" inlet "Y" with two 4" openings
7) Dust Collection Kit #2 - Qty-1
a. (2) W1007 4" Blast Gates
b. (2) D4206 4" x 10' Clear Hose
c. (1) W1004 Table Saw Dust Hood 4" OD
d. (1) W1010 Universal Dust Hood 4" OD
e. (1) W1015 Y-Fitting 4" x 4" x 4" OD
f. (10) W1317 Wire Hose Clamps
g. Must fit dust collector
8) Single Roller Stand - Qty-4
a. Rigid, steel construction
b. 250-pound capacity
c. 15-7/8" wide ball bearing roller
d. Adjustable in height from 26-1/2" to 45"
9) 15 Amp Corded 12 in. Dual Bevel Sliding Miter Saw with 70 Deg. Miter Capacity and LED Cut Line Indicator - Qty-1
a. 0 degree to 70 degree miter range right and left
b. 15 Amp. Motor-Heavy-duty motor power
c. Adjustable miter and bevel detents with bypass feature
d. Dual bevel design with 9 positive
e. 13 Positive Miter stops
f. Blade brake
g. Sliding miter fences
h. Built-In 1-1/2 in. dust port
i. LED cut line indication and work light
10) Foldable Mobile Miter Saw Stand with Mounting Braces - Qty-1
a. Large 12 in. wheels
b. Installed mounting braces for installed 1 x 8 work surface
c. Tool-free indexing extension lock levers
d. Single-step release for fast setup
e. Universal mounting brackets
f. Must fit Milter saw
11) 18V Lithium-Ion Brushless Cordless Combo Kit (5-Tool) with Two 5.0 Ah Batteries, 1 Charger 1 Tool Bag - Qty-1
a. Hammer Drill
b. Impact Driver: Tri-LED Lighting
c. SAWZALL Recip Saw: 1-1/4 in. stroke length
d. 6-1/2 in. Circular Saw: POWERSTATE brushless motor cordless
e. cordless LED work light
f. LITHIUM XC 5.0 Ah battery packs
i. one hammer drill/driver, one impact driver, one SAWZALL reciprocating saw, one 6-1/2 in. circular saw, one LED work light, two batteries, one battery charger, 1 contractor bag
12) 18-Volt Lithium-Ion High Output 6.0Ah Battery Pack (2-Pack) - Qty-2
a. HIGH OUTPUT XC 6.0 Ah battery packs
b. Must fit cordless tools
13) Pneumatic 21-Degree 3-1/2 in. Round Head Framing Nailer - Qty-2
a. 21-Degree 3-1/2 in. Round Head Framing Nailer, a swivel quick connect, no-mar pads, and an operator's manual
b. Powerful motor that can drive 3-1/2 in. x 0.148 in. framing nails (16D common) into hard lumber
c. lightweight and durable
d. Tool-free selectable trigger and quickly change between contact and sequential firing modes
e. Rear-loading magazine with 2-step reloading
14) 3-1/2 in. 18-Volt 30-Degree Lithium-Ion Brushless Cordless Framing Nailer (Tool-
Only) - Qty-2
a. 30 Degree Framing Nailer cordless
b. framing gun must fire 3 nails per second
c. Tool free drive depth adjustment
d. Dry fire lockout
e. Rafter hook
f. Belt hook
g. On board hex key storage
h. On / Off power button
15) Tool Storage 46 in. W x 18 in. D 9-Drawer Mobile Workbench Cabinet in Gloss Black -Qty-1
a. 9 drawers
b. 2 full extension ball bearing slides support up to 100 lbs.
c. All welded steel construction with a tough, rust-resistant powder coat paint finish
d. Internal keyed locking system (with 2 provided keys)
e. Minimal assembly required
16) 3/8 in. x 50 ft. Hybrid Air Hose - Qty-5
a. For general-purpose applications
b. Hybrid construction to allow for maximum flexibility, even in cold temperatures or hot conditions
c. Burst pressure: 1200 psi
d. 3/8 in. hose diameter
e. Lays flat
f. Abrasion-resistant outer cover
17) 3 in. x 0.131 in. 21° Plastic Collated Smooth Shank Framing Nails 4000 per Box - Qty-3
18) 2 in. x 0.113 in. 21° Plastic Collated Exterior Galvanized Ring Shank Round Head Framing Nails 1000 per Box - Qty- 3
19) 16 in. x 24 in. Laser Etched Framing Square - Qty-2
a. ARC-SCRIBE for easy radii marking
b. Durable lightweight anodized aluminum won't rust or corrode
c. Hi Visibility laser etched markings won't fade after heavy use
20) 7 in. Laser Etched Aluminum Rafter Square - Qty- 2
a. Hi Visibility laser etched markings won't fade after heavy use
b. SCRIBE-GUIDE™ precison scribe notches easily mark parallel lines
21) 12 in. Wonder Bar Pry Bar -Qty-2
a. Rugged, high-carbon steel construction
b. Versatile design can pull nails, pry, lift and scrape
22) 100 ft. Bold Line Chalk Reel Kit with Red Chalk - Qty-2
a. 6:1 gear retraction ratio for fast retraction
b. High strength braided bold line
c. StripGuard clutch providing the longest gear life
23) 22 oz. Milled Face Framing Hammer - Qty-2
a. 22 oz. head weight
b. Precision balanced design
c. Shockshield handle
d. Durable grip construction
e. Magnetic nail set
f. I-beam handle construction
g. Asymmetrical anti-ring claw
h. Milled face
i. Straight claw
24) Black and Gold Twist Drill Bit Set (21-Piece) - Qty-2
a. 21-piece set
b. 135-degree split point drills on contact and prevents walking
c. design improves chip ejection in metal and wood drilling applications
d. Black-oxide coated for greater wear resistance
25) Impact Duty Alloy Steel Screw Driver Bit Set (45-Piece) - Qty-1
a. Custom heat treat for longer bit life
b. Laser etched for easy size identification
c. Designed for use with impact drivers and drill drivers
26) Trigger Clamp Set (6-Piece) - Qty- 2
a. 1-handed operation
b. 100 lbs. clamping force on 6 in and 12 in. clamps
c. Trigger operation
d. Re-enforced nylon body
e. Removable jaw pads protect work surfaces
f. Includes two 4.5 in. clamps, two 6 in. clamps and two 12 in. clamps
27) 8511 N95 Cool Flow Valve Particulate Respirator,15 Pack – Qty-3
a. NIOSH-APPROVED N95
b. 3M Cool Flow Valve
c. ADVANCED FILTER MEDIA
28) 2 in. x 4 in. x 96 in. #2 Premium Grade KD-HT Stud - Qty- 40
a. Heat treated
29) 1 in. x 4 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board - Qty- 40
a. Heat treated
30) 2 in. x 2 in. x 8 ft. #1 Pressure-Treated Southern Pine Lumber - Qty- 40
a. Heat Treated
31) 4 in. x 4 in. x 8 ft. #2 Pressure-Treated Wood Post - Qty- 40
a. Heat Treated
32) 1/4 in. x 4 ft. x 8 ft. Pressure-Treated Pine Plywood - Qty-20
33) 3/4 in. x 4 ft. x 8 ft. Pressure-Treated Pine Plywood - Qty- 20
34) 1/2 in. x 2 ft. x 4 ft. Pressure-Treated Pine Plywood - Qty- 20
35) Stencil Machine - 1" - Qty- 1
a. Cut 1" characters into oil boards with speed and accuracy.
b. 4 lines/stencil.
36) Oil Boards - 7 x 24" - Qty- 1
a. Heavy-duty .015" thick.
b. Ideal for flat or curved surfaces.
37) Stencil Ink – Black spray can - Qty- 6
a. Permanent. Quick drying.
b. Use with Oil Boards or Brass Stencils.
38) 10" 2 HP 115V/230V Cabinet Saw - Qty- 1
a. Motor: 2 HP, 115V/230V prewired for 115V, single-phase, 16A/8A
b. Rip capacity: 31-1/2" right, 11-3/8" left of blade
c. Required depth of cut @ 90°: 3-1/8"
d. Required depth of cut @ 45°: 2-1/8"
e. Overall table dimensions needed: 40" W x 27" D
f. Distance from front of table to center of blade needed: 16"
g. Floor-to-table height needed: 34"
h. Arbor diameter: 5/8"
i. Arbor speed: 4000 RPM
j. Main dust port size: 4"
39) Sliding Table Attachment for Table Saws - Qty- 1
a. Sliding table dimensions: 47" x 8-7/8"
b. Extension table dimensions: 23-5/8" x 8-3/4"
c. Fence length: 42-7/8" - 60-1/8"
d. Required table travel: 56-7/8"
e. Required crosscutting length: 60"
f. Required rip capacity: 48"
g. Must fit Cabinet Saw requested
40) Drum Fan - Standard, 36" - Qty-3
a. Durable. Maintenance free.
b. 3 blades.
c. 8" wheels.
d. ETL/C-ETL Listed. OSHA compliant.
41) Cantilever Rack - Single Sided, 82 x 61 x 120" - Qty-1
a. Arms adjust in 3" increments.
b. Locking pin secures arms for quick, tool-free adjustment.
c. Capacity LBS – 9,730 LB
d. Arm Cap LBS- 1000 LBS
e. No. of Arms – 8
f. Arm Length- 48”
TMO Supplies:
1) Plastic Platform Truck with Polyolefin Wheels - 30 x 60" - Qty-3
a. Load Cap: 2000 lbs.
2) Industrial Pallet Truck - 48 x 27", Blue - Qty- 3
a. 3-position hand control - Raise, lower, neutral.
b. 3" lowered and 7.5" raised height.
c. 7" polyurethane steering wheels. 3" polyurethane fork wheels.
d. 210° steering arc.
e. Load Cap: 5500 lbs
3) Flammable Storage Cabinet - Wall-Mount, Manual Doors, Red, 20 Gallon - Qty-1
a. Double wall 18-gauge steel.
b. 350 lb. shelf capacity. Adjustable shelves.
c. Sloped shelves to safely direct spills away from containers.
d. Continuous piano hinge to provide smooth closure.
e. Meets NFPA, IFC and OSHA standards. FM approved.
f. Red - For paint, inks and Class III combustibles.
g. Wall-mount hardware included.
h. Lockable
4) Polypropylene Strapping Machine - Qty- 1
a. Front control panel
b. Heat weld - No seals required.
c. All enclosed welded
d. L x W x H : 37 x 23 x 30 or bigger
5) 9 x 8" Core Machine Strapping - 1⁄4" x .024" x 18,000', White - Qty- 2
a. Embossed surface.
b. Must fit Strapping Machine
c. Break strength : 200 +
6) Industrial Strapping Cart - Qty- 1
a. For polypropylene, polyester or steel strapping.
b. Fits core sizes 16 x 3" and 16 x 6".
c. Big 10" rubber and steel wheels for easy maneuvering. Automatic brake.
d. Large tray for storing seals and tools.
7) Automatic Sealless Combo polyStrapping Tool - Qty- 1
a. Automatic. Easy, one-handed tensioning, sealing and cutting.
b. 18V Li-ion battery - handles up to 800 seals per charge. 65-min. recharge.
c. Good up to 3,000 charges.
d. Full color LED touch screen with protective bumper sets exact tension and weld time.
e. Tool is pre-set for 5/8” strapping. Strap guide kit included to adjust to
3/4” width strapping.
f. Includes tool, 1 battery and charger.
g. FITS STRAPPING WIDTHS: 5/8-3/4"
h. FOR STRAPPING THICKNESS: .031 - .051
i. TENSION CAPACITY: 1,010 lbs.
8) Poly Strapping - 5⁄8" x .025" x 6,000', Black - Qty- 3
a. THICK-NESS: .025"
b. BREAK STRENGTH: 600 lbs.
c. LENGTH: 6,000'
d. WIDTH: 5/8"
9) Battery for Automatic Sealless Combo Strapping Tool - Qty- 2
a. 18 volt / 4.0Ah Lithium Ion Bosch.
b. Battery must fit Automatic Sealless Combo Strapping Tool
10) High Tensile Strapping Tools and Cart Offer - 5⁄8" - Qty- 1
a. For use with .025 to .031 tensile or thicker steel strapping.
b. Cart - Heavy duty brake keeps steel strapping from unwinding.
Accommodates a 16x3" core size.
c. Tensioner - Strong and durable. For tensioning steel strapping on flat surfaces.
d. Sealer and Cutter - Dependable, heavyweight construction.
11) Steel Strapping - Standard Grade, 5⁄8" x .020" x 2,468' - Qty- 3
12) Spill Containment Workstation - 4 Drum - Qty- 1
a. Low-profile workstations to protect floors from spills and leaks from drums and pails.
b. Configure drum handling and dispensing areas.
c. Tough, high-density polyethylene construction.
d. Resists chemicals, rust and corrosion.
e. Withstands extreme temperatures -20° to 120°F.
f. Non-skid, easy-to-clean removable grates.
g. Meets EPA, SPCC and NPDES regulations.
13) Universal 50 Gallon Mobile Can with Wheels Spill Kit - Qty- 1
a. Spill Kit must contain at a minimum:
i. (50) 15 x 19" Pads
ii. (4) 3" x 12' Sorbent Socks
iii. (8) 18 x 18" Pillows
iv. (5) Tamperproof Seals
v. (1) pair Nitrile Gloves
vi. (1) Emergency Handbook
vii. (4) pair Goggles
viii. (5) Disposal Bags
14) Black Wire Shelving Unit - 72 x 24 x 72" - Qty- 2
a. Includes 4 shelves and 4 posts.
b. Easy assembly – No tools needed.
c. Shelves adjust in 1" increments.
d. Open wire
e. Black powder coating resists corrosion
f. NSF certified.
g. Optional 5" polyurethane swivel stem casters add 6" to height.
15) Label Maker - Qty- 1
a. Prints up to 7 lines
b. Bluetooth® for wireless convenience or USB cable for PC connection –
Create custom labels with barcodes, images and QR codes.
c. Full QWERTY keyboard with colored graphic display.
d. Compatible with Windows (8.1 or later) and Mac OS (v10.15 or later).
e. Powered by 6 AA Batteries or included AC adapter.
f. TAPE WIDTH: 1/8 - 1"
16) Tape - Black on Yellow, 1" - Qty- 2
a. Laminated for indoor/outdoor use.
b. Black print on yellow label
c. Color : Black on Yellow
d. Tape Width: 1"
e. Tape Length: 314"
f. Must fit Label Maker
17) Machine Length Stretch Film - Cast, 80 gauge, 20" x 6,000', Black Opaque - Qty- 6
a. Stretches up to 250%
b. 80 gauge - For loads up to 2,500 lbs.
c. Size: 20" x 6,000'
d. Must fit Semi-Automatic Stretch Wrap Machine
18) Machine Length Stretch Film - Blown, 70 gauge, 20'' x 6,000' - Qty- 6
a. 70 gauge - For loads up to 2,000 lbs.
b. Resists puncturing and tearing, even around sharp corners.
c. One-sided cling – holds tight without sticking to nearby pallets.
d. Stretches up to 250%.
e. Size: 20" x 6,000'
f. Must fit Semi-Automatic Stretch Wrap Machine
19) Industrial Lockers - Double Tier, 3 Wide, Assembled, 36" Wide, 12" Deep, Gray - Qty- 2
a. Reinforced doors withstand abuse.
b. Smooth, quiet, recessed handle for safety and security.
c. Solid steel construction.
d. Legs included - Add 6" to height.
e. Louvers allow air to circulate.
f. Includes 3 coat hooks per locker.
20) Pure Flow 1000® Eyewash Station - Qty-1
a. Constant 15-minute flow at 0.4 gpm to thoroughly flush eyes and face.
b. 24-month cartridge life – 4 times longer than Porta Stream II®.
c. Cover/handle keeps dirt and debris from clogging basin and nozzles.
d. No plumbing needed.
e. Includes: Eyewash station, emergency sign, mounting bracket and inspection tag.
21) Pure Flow 1000® Saline Cartridge - Qty- 1
a. 24-month cartridge life
b. Must fit eye wash station
22) Semi-Automatic Stretch Wrap Machine with Scale - 52 x 52 x 80" - Qty- 1
a. Must include built-in scale with +/- 1 lb. accuracy.
b. Wraps approximately 20 loads per hour
c. Two wrap modes - Select spiral up and down.
d. Convenient photo eye - Allows operator to walk away.
e. Adjusts from 20% to 150% stretch.
f. Troubleshooting screen.
g. 115 volt, 15 amp.
h. MAX. SKID SIZE (L x W x H) : 52 x 52 x 80"
i. CAPACITY/ACCURACY: 4,000 lbs. x 1 lb.
j. ROLL WIDTH: 20"
k. SHPG. WT.: 1,500 lbs.
23) Ramp for Semi-Automatic Stretch Wrap Machine - 67 x 46 x 4" - Qty-1
a. Must Fit Stretch Wrap Machine
24) Jumbo Industrial Packing Table - 144 x 48", Laminate Top - Qty-1
a. 1 5/8" thick laminate top with rounded edges.
b. All tables hold up to 500 lbs.
c. Adjustable steel legs 30 to 37" in 1 1/2" increments.
d. Full-depth bottom shelf for storage
25) Anti-Static Table Mat - Vinyl, 2 x 4' - Qty-1
a. Mats include two snap fasteners and grounding cord for wrist straps.
b. 3-layer construction. General packaging and assembly use.
c. Protect electronic devices. Must transfers static charges from work surface to ground.
26) Foot-Operated Extra-Long Impulse Sealer - 30" - Qty-1
a. Variable timer control to let you seal all types of plastic films up to 30" wide and 8 mil thickness.
b. Extra-long foot sealer for sealing bags up to 30" wide.
c. For use with polyethylene and metallic bags.
d. Foot pedal operation.
e. 110 volts.
f. SEAL L x W: 30 x 1/16"
g. OVERALL DIM. L x W x H: 33 x 18 x 34"
h. MAX. SEAL THICKNESS: 8 Mil
27) Static Shielding Rolls - 36" x 200 yds - Qty- 2
a. Metal "Faraday cage" layer shields products from electric energy inside and prevents static buildup.
b. 4-layer protection guards against charges inside and out.
28) ESD Tape - 1⁄2" x 36 yds - Qty-1
a. Eliminates static discharge during unwinding and removal.
b. Maximum temperature 500°F.
c. Polyimide film with silicone adhesive.
d. 3" core.
File details come from the government source that posted it. Updated .