Attachment 2 Salient Characteristics_Redacted.pdf
PDF 83 KB Posted
- Attached to
- Oil Storage & Dispensing System
- Solicitation number
- FA441925Q0016
About this file
This is a memorandum from the 97th Air Mobility Wing (AETC) at Altus Air Force Base Oklahoma, dated October 23, 2024, detailing salient characteristics for an Oil Storage and Dispensing System requested by the Vehicle Management Flight for their Refueling Maintenance shop (Building 392).
The system specifications require a minimum working height of 104" and width of 90", with six 65-gallon aluminized steel rectangular containers, two 32" x 84" upright frames, and four 70" wide crossbeams. Technical requirements include six glass-tube sight gauges, six gravity-fed supply lines with self-closing valves, a 115V 8gpm self-priming gear pump, a 70" drip pan with wire mesh and NPT drain, and a three-section spill containment pan with overfill piping. Additional components include containment pan brackets, PVC discharge hose with quick disconnects, reinforced PVC suction hose with suction tube, top-mounted air vents, and all required assembly hoses and fittings. The system is needed to perform maintenance on POL and fuel dispensing trucks.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
97TH AIR MOBILITY WING (AETC)
ALTUS AIR FORCE BASE OKLAHOMA
23 OCT 2024
MEMORANDUM FOR
FROM:
SUBJECT: Oil Storage and Dispensing System
1. The Vehicle Management Flight has requested to purchase an Oil Storage and Dispensing System for the Refueling Maintenance shop (Bldg. 392). The system is required to perform maintenance actions on the wings POL and fuel dispensing trucks. The following is a list of the salient characteristics the Oil Storage and Dispensing System must have:
Specifications:
1. Working height of 104” (Min)
2. Working width of 90” (Min)
3. At least six, 65-gal aluminized steel, rectangular containers
4. Two, 32” x 84” upright frames
5. Four, 70” wide crossbeams
6. Six, glass-tube sight gauges
7. Six, gravity-fed supply lines that link to a self-closing valve
8. One, 115V, 8gpm, self-priming gear pump
9. One, 70” drip pan with wire mesh and NPT drain
10. One, three section spill containment pan with overfill piping to connect the sections together
11. Containment pan brackets
12. PVC discharge hose with quick disconnects
13. Reinforced PVC suction hose with suction tube
14. Top-mounted air vents
15. All required hoses and fittings for assembly
2. If there are any concerns regarding this memorandum, please contact
File details come from the government source that posted it. Updated .