Attachment 2 - SALIENT CHARACTERISTICS Filter Press.pdf

SALIENT CHARACTERISTICS

For

FILTER PRESS

1.0. SCOPE OF EQUIPMENT:

All proposed products shall meet or exceed the following specifications outlined in this Salient Characterizes. All items shall be delivered to the 309th Aerospace Maintenance and Regeneration Group (AMARG) – FOB DESTINATION

1.1. PRODUCT PERFORMANCE SPECIFICATION:

Filter Press must meet the minimum specifications below:

SPECIFICATIONS

Filter Press Specifications:

• 630mm (24") Type HCP-III Sperry “E” Filter Press o Must Provide 2.56 Cubic feet of filter capacity o Must include spacers for the optional 5.41 cubic feet expansion o Must be 57 square feet of filtration area

Filter Press Standard Options:

• Sperry Heavy Duty Fabricated Framework, FSB 100 psi

• (4) CGR-W Polypropylene Gasketed Plate, 5/8" recess o (1) Set #1P1 Polypropylene Filter Cloth (8 and 2) Installed in plate

• (4) CGR-NW Polypropylene Gasketed Plate, 5/8" recess o (1) Set #1P1 Polypropylene Filter Cloth (8 and 2) Installed in plates

• (1) CGR-W Polypropylene Gasketed Head Plate, 5/8" recess o (1) Set #1P1 Polypropylene Filter Cloth (8 and 2) Installed in plates

• (1) CGR-NW Polypropylene Gasketed Tail Plate, 5/8" recess o (1) Set #1P1 Polypropylene Filter Cloth (8 and 2) Installed in plates

• (1) Set 304 Stainless Steel Head Connections with #150 Flanges o (1) 2" Center Feed o (2) 1" – 1/2" Top and Bottom Corner Wash/Air Inlets and

Filtrate Outlets o (2) 1" – 1/2" Top and Bottom Corner Wash/Air and Filtrate

Outlets

• (1) Inlet Pressure Gauge 0-200psi with diaphragm Isolation Base

• (1) Blanking Plate

• (1) HCP-III Automatic Power Unit Closing Device

Filter Press Warranty:

• Filter Press and its components must come with a five (5) year unconditional warranty