Attachment 2 - Salient Characteristics.pdf

This document is a Salient Characteristics specification for JLG High-Reach Vehicle Repairs, outlining the requirements and procedures for repair and maintenance work on a JLG man lift unit.

The support requirements specify four OEM replacement parts: a Swing Drive Hub (Part #1001248468), an Upper Lift Cylinder (Part #1001251004), two LH Wheels 36X14-2 (Part #1001207345), and two RH Wheels 36X14-2 (Part #1001207346). The repair work is divided into four primary categories. The Swing Drive Hub Replacement requires the contractor to secure the boom and turret, remove the non-functional hub, install the new OEM hub, ensure proper meshing with swing gear components, and functionally test the 360-degree swing function. The Upper Lift Cylinder Replacement requires mechanical support of the upper boom section, safe pressure relief from hydraulic lines, disconnection and removal of the faulty cylinder, installation of the new OEM cylinder, reconnection and bleeding of hydraulic lines per manufacturer specifications, and full range testing of lift and lower functions. The Wheel and Tire Assembly Replacement requires the contractor to safely support the chassis, remove all four existing assemblies, and install two new LH and two new RH OEM wheel assemblies with all lug nuts torqued to manufacturer specifications. Final Testing and Inspection requires a comprehensive functional test of all man lift operations including drive, steering, lift, and swing functions, a final inspection to verify no hydraulic leaks and that all components are secure, and return of the equipment in ready-to-use condition with the work area cleaned of all debris.