Attachment 2 -Drawings for Pallet LidWood-Sheet Metal.pdf
PDF 284 KB Posted
- Attached to
- SPECIAL PACKAGING INSTRUCTIONS (SPI) CONTAINERS FOR DLA DISTRIBUTION WARNER ROBINS, GA (DDWG)
- Solicitation number
- SP330026Q0196
- Issued by
-
Defense Logistics Agency Distribution
About this file
Summary
These documents are Defense Logistics Agency (DLA) technical drawings and specifications for two wooden pallet and sheet metal container assemblies. The first assembly (DLA Material Number 8115 N00004162) is a wooden-sheet metal pallet lid measuring 152 x 52 1/4 x 1 1/8 inches, weighing 25 lbs, constructed from two pieces of 1x8x152 lumber, five pieces of 1x8x373/4 lumber, one sheet of 48x96x3/8 plywood, and two sheets of 24x48x3/8 plywood. The second assembly (DLA Material Number 8115 N0000182) is a complete wooden pallet measuring 152 x 52 1/4 x 7 1/4 inches, also weighing 25 lbs, comprising nine component parts including lumber in various dimensions, plywood sheets, rub strips, and mitered rub strips.
Both assemblies specify commercial-level packing compliance with ASTM B660-15, Section 8, Figure 26 (Modified). All wood packing material must be debarked and heat-treated at 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes, with certification from an accredited agency recognized by the American Lumber Standards Committee (ALSC). All plywood must meet Voluntary Product Standard PS 1-07, Exterior Grade CC. Fasteners include 1-inch power-driven staples and 5/8-inch power-driven corrugated fasteners at specified locations. Distribution is authorized exclusively to Department of Defense and U.S. DoD contractors for administrative or operational use, with all other requests referred to the Defense Logistics Agency in Fort Belvoir, Virginia.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0002 SF30 SP330026Q0196.pdf | ||
| Question and Answers Amend 0002.docx | DOCX document | |
| Question and Answers.docx | DOCX document | |
| Amendment 0001 SF30 SP330026Q0196.pdf | ||
| Attachment 1 - Schedule of Supplies.xlsx | XLSX spreadsheet | |
| SP330026Q0196.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LlD, WOODEN-SHEET METAL CONTAINER
152 X 52 1/ 4 X 1 1/8
D.L.A. MATERIAL NUMBER: 8115 NOOOO4162
PART QUAN. I DESCRIPTION I SIZE
NO.
1 2 LUMBER 1 X 8 X 152
2 5 LUMBER 1X8X373/4
3 I 1 I PLYWOOD 48 X 96 X 3/8
4 I 2 I PLYWOOD 24 X48X 3/8
�A§� 1 �F 1
(TWO OUTSIDE, TWO ON PLYWOOD SEAMS, ONE CENTERED)
(CENTERED)
(LEFT/RIGHT OF FULL SHEET)
Information to Wood Sheet Metal Pallet Lid, DLA Material No. 8115 N 00004162
Packing Level: Commercial Packaging
Closure: Commercial Level, IAW ASTM B660-15, Sec. 8, FIG. 26 (Modified)
Or
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL
A
SPEC
ASTM B660 - 15 (MODIFIED)
DIMENSIONS: 152 X 53 X 3
WEIGHT: 25 LBS.
NOTES:
STYLE
2 (Fig. 26, Mod.)
CL VRTY GR
1) ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE
CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE
DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE
PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT
2) All plywood to be Voluntary Product Standard PS 1-07, Exterior Grade CC.
3) Fasteners attaching P/N 3 & 4 to P/N 1 & 2 shall be common, commercial grade 1" power driven staples.
4) Fasteners attaching P/N 2 to P/N 1 (at all 10 locations) shall be commercial grade 5/8" power driven corrugated fasteners. 2 each per location.
DISTRIBUTION: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or
Operational Use. Other requests for this document shall be referred to the Defense Logistics Agency, Ft.
Belvoir, Virginia. Property of Defense Logistics Agency, Ft. Belvoir, Virginia.
NO. RE\IISIONS DRAWN BY I DATE
DEFENSE LOGISTICS AGENCY
NEW CUMBERLAND, PA 17070-5001
PROPOSED Wood Pallet Lid Sheet Metal Container Drawing
DEFENSE DEPOT Warner Robins, GA
DESIGl£0 B'I': I APPROVED BY: I f,£1,Dfll.E.
""""' "' I MECH/MOD ENGR SHEET
o, DRAWING NU�BER:
SCN.e
I
JULIAN DATE
Full Scale REV A
PART
NO.
PALLET, WOODEN-SHEET METAL CONTAINER
152 X 52 1/4 X 7 1/4
D. L.A. MATERIAL NUMBER: 8115 NOOO01822
QUAN. DESCRIPTION SIZE
2 LUMBER 1 X 8 X 152
5 LUMBER 1X8X373/4
3 LUMBER 1 X4 X 152
2 LUMBER 2 X 2 X 152
2 LUMBER 2X2X44
1 PLYWOOD 48X96X3/8
2 PLYWOOD 24 X48X 3/8
6 RUB STRIPS 2 X4 X 12
6 MITERED RUB STRIPS 4X4 X 12
(TWO OUTSIDE, TWO ON PLYWOOD SEAMS, ONE CENTERED)
(ONE CENTER, 2 STRADDLE 1 X 8 SEAMS)
(TOP FRAME,SIDE)
(TOP FRAME, END)
(CENTERED)
{LEFT/RIGHT OF FULL SHEET)
Information to Sheet Metal Pallet 8115 N 0000 1822
Packing Level: Commercial Packaging
Closure: Commercial Level, IAW ASTM B660-15, Sec. 8, FIG. 26 (Modified)
Or
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE CL VRTY GR
A ASTM B660 - 15 (MODIFIED) 2 (Fig. 26, Mod.)
DIMENSIONS: 152 X 53 X 3
WEIGHT: 25 LBS.
NOTES:
1) ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART
OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO
HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER
STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR
DEFENSE PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE.
THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT
2) All plywood to be Voluntary Product Standard PS 1-07, Exterior Grade CC.
3) Fasteners attaching P/N 3 & 4 to P/N 1 & 2 shall be common, commercial grade 1" power driven staples.
4) Fasteners attaching P/N 2 to P/N 1 (at all 10 locations) shall be commercial grade 5/8" power driven corrugated fasteners. 2 each per location.
DISTRIBUTION: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational
Use. Other requests for this document shall be referred to the Defense Logistics Agency, Ft. Belvoir, Virginia.
Property of Defense Logistics Agency, Ft. Belvoir, Virginia.
PAGE 1 OF2
NO. REVISIONS DRAWN BY DATE
DEFENSE LOGISTICS AGENCY
NEW CUMBERLAND, PA 17070-5001
PROPOSED Wood Pallet - Sheet Metal Container Drawing
DEFENSE DEPOT Warner Robins, GA
DESIGNED BY: APPROVED BY: ACAD FILE:
DRAWN BY: MECH/MOD ENGR SHEET
DRAWING NUMBER:
OF
SCALE: JULIAN DATE
Full Scale REV A
File details come from the government source that posted it. Updated .