Attachment_2_Drawings.pdf

PDF 11 MB Posted Mar 7, 2025

Attached to: Construction of Power Line Federal contract opportunity
Solicitation number: 140R3025R0010
Issued by: Department of the Interior Bureau of Reclamation

About this file

Written by GovTribe AI · Mar 7, 2025

This document is a detailed installation guide for underground electrical conduit systems produced by Mohave Electric Cooperative, Inc. The guide provides comprehensive technical specifications and installation requirements for underground electrical infrastructure, including conduit trenching, placement, depths, sweeps, and material standards. Key technical specifications include using 3-inch diameter Schedule 40 Electrical Grade PVC conduits for primary and secondary facilities, maintaining minimum trench depths of 24-48 inches depending on voltage, and adhering to specific separation requirements between different utility lines.

The guide outlines extensive procedural requirements for contractors, including mandatory Arizona 811 utility location notifications, required conduit inspection processes, ground rod installation protocols, and specific guidelines for installing conduits near transformers, secondary boxes, and fiber optic infrastructure. Additional requirements include using factory-made conduit sweeps, installing warning tape, maintaining specific clearances between utilities, and ensuring proper backfill materials. The document emphasizes that any deviations from the specified standards must receive prior written approval from the Cooperative, and contractors are financially responsible for any relocations or grade changes that impact installed infrastructure.

View the file

Other files for this federal contract opportunity

Other files attached to Construction of Power Line, newest first.
File	Type	Posted
Topock_Marsh_Pick_List_0004.pdf	PDF	May 19, 2025
Attachment_1_Statement_of_Work_Revised_5-16-25_0004.pdf	PDF	May 19, 2025
Sol_140R3025R0010_Amd_0004.pdf	PDF	May 19, 2025
Revised_Section_B_0004.pdf	PDF	May 19, 2025
Questions_and_Answers_0004.pdf	PDF	May 19, 2025
Sol_140R3025R0010_Amd_0003.pdf	PDF	Apr 30, 2025
Site_Visit_Sign-In_Sheet_0003.pdf	PDF	Apr 30, 2025
Sol_140R3025R0010_Amd_0002.pdf	PDF	Apr 9, 2025
Sol_140R3025R0010_Amd_0001.pdf	PDF	Mar 10, 2025
Attachment_6_Topock_Marsh_Line_Route.zip	ZIP file	Mar 7, 2025
Attachment_3_Materials_Pick_List.pdf	PDF	Mar 7, 2025
Attachment_5_Topock_Marsh_Staking_Sheet.pdf	PDF	Mar 7, 2025
Attachment_9_-_Past_Performanc_Questionnaire.pdf	PDF	Mar 7, 2025
Attachment_10_Key_Subcontractor_Specailized_Experience.pdf	PDF	Mar 7, 2025
Solicitation_No__140R3025R0010.pdf	PDF	Mar 7, 2025
Attachment_7_Wage_Determination.pdf	PDF	Mar 7, 2025
Sol_140R3025R0010.pdf	PDF	Mar 7, 2025
Attachment_4_Topock_Marsh_Route.pdf	PDF	Mar 7, 2025
Attachment_1_Statement_of_Work.pdf	PDF	Mar 7, 2025
Attachment_8_DI-137_Release_of_Claims.pdf	PDF	Mar 7, 2025

Show all 20

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

36.22

REVISION

REV. IQMS DESCRIPTION DATE ENG.

A 0.9 INITIAL RELEASE 1/10/2023 C. WILKINS

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 KP1223 VERTICAL LINE POST FEED THROUGH

TRUNNION 1

2 KP1220-02 ARTICULATING ARM 2

3 KP1183-09 LOCKING PIN 2

KADDAS PROPRIETARY V0 MATERIAL

SHEET 1 OF 1

1/9/2023C. WILKINS

SCALE: 1:4

REVDWG. NO. / PART NO.

SIZE

TITLE

DRAWN BY:

MATERIAL:PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS

THE SOLE PROPERTY OF KADDAS ENTERPRISES. ANY

REPRODUCTION IN PART OR AS A WHOLE WITHOUT

THE WRITTEN PERMISSION OF KADDAS ENTERPRISES

IS PROHIBITED.

KE1223-03

PT#: N/A

DATE:

DO NOT SCALE

DRAWING

VERRTICAL LINE POST FEED

THROUGH TRUNNION W/ARMSNAME:UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES AND

TOLERANCES ARE REFRENCE ONLY

UNLESS OTHERWISE SPECIFIED.

A A

B B

C C

D D

E E

F F

ITEM NO. MATERIAL

AutoCAD SHX Text

MOHAVE ELECTRIC

AutoCAD SHX Text

COOPERATIVE INC.

AutoCAD SHX Text

ARIZONA 22 KINGMAN

AutoCAD SHX Text

MECO APPROVAL DATE:

AutoCAD SHX Text

DWN. BY

AutoCAD SHX Text

GARY FISER

AutoCAD SHX Text

DATE

AutoCAD SHX Text 5-3-95

AutoCAD SHX Text

FILE:

AutoCAD SHX Text

VC3NP

AutoCAD SHX Text

REVISED

AutoCAD SHX Text

REVISED

AutoCAD SHX Text

REVISED

AutoCAD SHX Text d

AutoCAD SHX Text Washer, square, 3"

AutoCAD SHX Text

VERTICAL 30%%D-60%%D ANGLE

AutoCAD SHX Text Insulator, rubber

AutoCAD SHX Text

AutoCAD SHX Text k

AutoCAD SHX Text

VC3NP

AutoCAD SHX Text

NARROW PROFILE CONSTRUCTION

AutoCAD SHX Text Bolt, eye 3/4"

AutoCAD SHX Text

AutoCAD SHX Text o

AutoCAD SHX Text aw

AutoCAD SHX Text

AutoCAD SHX Text Washer, coil

AutoCAD SHX Text d,o,aw

AutoCAD SHX Text Note: 30%%d-40%%d angles use 2 anchors, AutoCAD SHX Text

AutoCAD SHX Text position of guy

AutoCAD SHX Text k

AutoCAD SHX Text guy assembly E4.4NP.

AutoCAD SHX Text 41%%d-60%%d angles use 4 anchors, AutoCAD SHX Text guy assembly E4.5NP.

AutoCAD SHX Text Minimum pole height to be 45'

AutoCAD SHX Text m

AutoCAD SHX Text

AutoCAD SHX Text Suspension clamp

AutoCAD SHX Text 6-15-20

AutoCAD SHX Text 9-25-03

4-5-16

Anchor, Cross-Plate, 24in painted fits 3/4in rod

By Chance

Catalog # X2434

Cross-Plate Anchor for 24" (610 mm) Hole used with 0.625" (15.9

mm) or 0.75" (19.1 mm) Diameter Rod.

Features

Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.

Painted with black paint

Nut retainer on bottom of anchor holds nut in place during installation

1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor

2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor

General

Application Earth Tension Anchoring

Catalog Number X2434

Coating Black Paint

Type Earth Tension Anchors

UPC 096359066590

Dimensions

Anchor Hole Size 24 in

Area 400 in² Dimensions 23.625 in x 23.625 in x 5.000 in

Height 5 in

Length 23.625 in

Rod Diameter - Order

Separately

0.625 in

0.75 in

Weight 34.114 lb

Width 23.625 in

Certifications And Compliance

RUS Listed Reference z - Anchors, plate

Logistics

Pallet Quantity 24

Standard Package 1

Product Assets

Catalogs - Anchors

Installation Manuals - TD06136E_Cross_Plate_Anchors

Installation Manuals - Holding Capacity Chart - Cross Plate

Anchors

Installation Manuals - Holding Capacity Chart - Soil Classification

Literature - Anchoring

Sales Drawings - Cross-Plate Anchor https://www.hubbell.com/hubbell/en/product/p/148016 https://www.hubbell.com/hubbell/en/product/p/148016 https://www.hubbell.com/hubbell/en/product/p/148016 https://www.hubbell.com/hubbell/en/product/p/148016 https://www.hubbell.com/hubbell/en/product/p/148016 https://hubbellcdn.com/catalogfull/04-Anchors.pdf https://hubbellcdn.com/installationmanuals/TD06136E_Cross_Plate_Anchors.pdf https://hubbellcdn.com/installationmanuals/Cross%20Plate%20Anchors.pdf https://hubbellcdn.com/installationmanuals/Cross%20Plate%20Anchors.pdf https://hubbellcdn.com/installationmanuals/Soil%20Class.pdf https://hubbellcdn.com/literature/CENT-CP-CAT-EN-01850.pdf https://hubbellcdn.com/salesdrawings/SAX16.pdf

FILE:

MEC UG CONDUIT

CONDUIT INSTALLATION GUIDE

1 5/8" x 1 5/8" x 6'

UNI STRUT

20"

NUTS, & WASHERS

1/4" x 1 1/2" BOLTS, 4 BOLT MOUNT

12"

34"

4'-6"

5 1/8"

56"

13"

10"

12"

94"

AutoCAD SHX Text ??T01

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text

PRI

AutoCAD SHX Text

PRI

AutoCAD SHX Text 12"

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

RADIUS PIN

AutoCAD SHX Text 35"

AutoCAD SHX Text 12"

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 18.5"

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text ??U01

AutoCAD SHX Text

3 PHASE VFI CABINET

AutoCAD SHX Text

CONDUIT INSTALLATION GUIDE

AutoCAD SHX Text 24"

AutoCAD SHX Text 12"

AutoCAD SHX Text facilities shall be 48 inches radius, 3 inch diameter Schedule 40 Electrical

AutoCAD SHX Text location of conduits in different types of Cooperative equipment, as well as

AutoCAD SHX Text final grade and property line offsets. In addition, the proper configuration of

AutoCAD SHX Text the ground rod and sweeps at stub-up locations for various types of electrical

AutoCAD SHX Text apparatus is also noted. Deviations from these standards which may be

AutoCAD SHX Text necessary due to individual job requirements must have prior, written approval

AutoCAD SHX Text from the Cooperative.

AutoCAD SHX Text Cooperative; violations of this policy will be prosecuted to the fullest extent of

AutoCAD SHX Text the law. When stubbing conduit into existing Cooperative facilities is necessary, AutoCAD SHX Text the installing party shall cease trenching four (4) feet from the facility. The

AutoCAD SHX Text installer shall then make an appointment to meet an authorized Cooperative

AutoCAD SHX Text employee to assist in the conduit installation procedure; the installer shall have, AutoCAD SHX Text on hand, all necessary material and labor required to complete the procedure.

AutoCAD SHX Text Appointments (24 hours notice required) for stubbing conduits can be made

AutoCAD SHX Text

9. In no case shall any unauthorized person enter into existing

AutoCAD SHX Text appurtenances or facilities, whether energized or not, which are owned by the

AutoCAD SHX Text %%uConduit Inspection Procedure

AutoCAD SHX Text

(928) 763-4115.

AutoCAD SHX Text

2. At the scheduled time, the Cooperative representative shall jointly

AutoCAD SHX Text inspect (with the installing party) the sections of trench which are ready for

AutoCAD SHX Text backfill. If no discrepancies are found, the inspector shall initial each section on

AutoCAD SHX Text the installer's design map (and the inspector's map) and approved sections of

AutoCAD SHX Text by calling the Cooperative's Operations department at (928) 763-4115.

AutoCAD SHX Text Conduit inspections by Cooperative personnel shall be required on all

AutoCAD SHX Text conduit systems installed for Cooperative use prior to backfilling. The

AutoCAD SHX Text procedure for conduit inspection shall be as follows:

AutoCAD SHX Text

1. The party requesting the conduit inspection shall give the Cooperative

AutoCAD SHX Text 24 hours notice for the conduit inspection, unless prior arrangements are made;

AutoCAD SHX Text appointments can be made by calling the Engineering department at

AutoCAD SHX Text conduit may be backfilled. If discrepancies are noted, the installing party shall

AutoCAD SHX Text make arrangements for a re-inspection of the trench after corrections are made.

AutoCAD SHX Text

3. In the event that uninspected sections of trench are backfilled, the

AutoCAD SHX Text %%uGrade and Grade Changes

AutoCAD SHX Text to the commencement of construction of electric facilities.

AutoCAD SHX Text %%uSpecification Sheets

AutoCAD SHX Text If, prior or subsequent to construction of the electric facilities, grade

AutoCAD SHX Text changes are made which would render the facilities in violation of Cooperative

AutoCAD SHX Text specifications, the National Electric Safety Code and/or local regulations, the

AutoCAD SHX Text cost of any damage, relocation, replacement, and/or resulting repairs shall be

AutoCAD SHX Text The specification sheets on this drawing are designed to show the proper

AutoCAD SHX Text

4. If a portion of the conduit system fails due to defects in the

AutoCAD SHX Text installer's work, the applicant shall repair, or cause to be repaired, the defect

AutoCAD SHX Text and any damaged portion of the conduit system at his own expense.

AutoCAD SHX Text Cooperative may require reopening of the trench to verify the depth and

AutoCAD SHX Text configuration of the facilities. All sections of trench must have warning tape

AutoCAD SHX Text and be inspected and approved by authorized Cooperative representatives prior

AutoCAD SHX Text borne by the applicant.

AutoCAD SHX Text X

AutoCAD SHX Text

ADD 16" PIECE STRAIGHT

AutoCAD SHX Text X

AutoCAD SHX Text 4"

AutoCAD SHX Text

CONDUIT TO SWEEP.

AutoCAD SHX Text 1"

AutoCAD SHX Text %%u3 PHASE RISER

AutoCAD SHX Text %%uSECTION X-X

AutoCAD SHX Text 1"

AutoCAD SHX Text

OF CONDUIT STUB

AutoCAD SHX Text

CORRECT LOCATION

AutoCAD SHX Text

OVERHEAD NEUTRAL WIRE

AutoCAD SHX Text

OF CONDUIT STUB

AutoCAD SHX Text

INCORRECT LOCATION

AutoCAD SHX Text transverse crossings which is 12" with exception to the fiber conduit placed

AutoCAD SHX Text directions between primary conduits and other dry utilities is 24", other than

AutoCAD SHX Text Cooperative prior to acceptance of the conduit system for use. All sweeps

AutoCAD SHX Text used on conduit systems installed for use by the Cooperative shall be of the

AutoCAD SHX Text factory-made variety; heated, hand formed sweeps shall not be acceptable.

AutoCAD SHX Text The maximum change of direction in any plane between lengths of straight

AutoCAD SHX Text rigid conduit without the use of sweeps shall be limited to 5 degrees.

AutoCAD SHX Text

4. Warning tape (supplied by the Cooperative) shall be installed in all

AutoCAD SHX Text primary and secondary trenches at a depth of one (1) foot below final grade.

AutoCAD SHX Text When conduit stubs for future use are required, location discs (provided by

AutoCAD SHX Text the Cooperative) shall be installed at the termination point of the conduit stub.

AutoCAD SHX Text conduit system is required prior to the acceptance of the conduit system by

AutoCAD SHX Text the Cooperative. Ground rods must be driven at least 7 (seven) feet into the

AutoCAD SHX Text sectionalizing cabinet locations, and VFI cabinets, and are to be installed in

AutoCAD SHX Text accordance with the applicable specification drawing. Appointments to pick up

AutoCAD SHX Text ground rods can be made (with 24 hours notice) by calling the Warehouse

AutoCAD SHX Text ground. Ground rods are required at transformer, secondary box, vault, AutoCAD SHX Text

6. The installation of ground rods (which are supplied by the Cooperative

AutoCAD SHX Text and charged to the applicant) by the applicant during the construction of the

AutoCAD SHX Text Appointments to pick up the required warning tape and location discs may be

AutoCAD SHX Text made by calling the Warehouse department at (928) 763-4115.

AutoCAD SHX Text

5. Stub-ups for special equipment installations (transformers, secondary

AutoCAD SHX Text boxes, riser poles, vaults, sectionalizing cabinets) shall be in accordance with

AutoCAD SHX Text the attached dimensioned specification drawings. All stubbed sweeps shall be

AutoCAD SHX Text installed as described on the drawings, and shall be plumb. Conduit locator

AutoCAD SHX Text discs, where required, shall be supplied by the Cooperative and installed by the

AutoCAD SHX Text applicant. All stubbed conduits shall have openings covered. Stub-ups of

AutoCAD SHX Text Grade PVC conduit. Changes/substitutions from these minimum sizes may be

AutoCAD SHX Text required due to trench depth, optional secondary conduit locations, and

AutoCAD SHX Text individual project requirements, and must be approved in writing by the

AutoCAD SHX Text Grade PVC conduit. The minimum sweep size and type for Cooperative-owned

AutoCAD SHX Text secondary facilities shall be 24 inches radius, 3 inch diameter Schedule 40

AutoCAD SHX Text Electrical Grade PVC conduit. The minimum sweep size and type for fiber

AutoCAD SHX Text

7. Where required, vaults and three-phase transformer pads shall be

AutoCAD SHX Text the minimum vertical separation between "wet" utilities and electrical conduits

AutoCAD SHX Text drainage structures, a minimum seperation of 18" inches shall be required, and

AutoCAD SHX Text minimum conduit depths shall be maintained. Minimum seperation in all

AutoCAD SHX Text conduits shall be 12 inches. When crossing under concrete flood control/

AutoCAD SHX Text supplied and installed by the applicant to the Cooperative's specifications.

AutoCAD SHX Text Ground sleeves ("basements") for three-phase transformer pads and VFI

AutoCAD SHX Text cabinets are supplied by the Cooperative and installed by the applicant.

AutoCAD SHX Text Appointments to pick up ground sleeves and VFI cabinets can be made (with

AutoCAD SHX Text 24 hours notice) by calling the Warehouse department at (928) 763-4115.

AutoCAD SHX Text

8. Minimum horizontal separation between conduits installed for electrical

AutoCAD SHX Text use and "wet" utilities (water, gas, and sewer) shall be 48" inches: at crossings, AutoCAD SHX Text department at (928) 763-4115.

AutoCAD SHX Text fiber conduits shall be behind the transformer pad and 1'-6" from the Public

AutoCAD SHX Text road cuts and street repair.

AutoCAD SHX Text Cooperative shall be as follows:

AutoCAD SHX Text %%uGeneral Specifications for Conduit Installations

AutoCAD SHX Text monuments which may be disturbed during the course of construction of the

AutoCAD SHX Text conduit system is the responsibility of the applicant. The applicant shall also

AutoCAD SHX Text be responsible for the acquisition of all necessary permits which may be

AutoCAD SHX Text required by the applicable jurisdictional authority, and all work performed shall

AutoCAD SHX Text meet the applicable governmental compaction and restoration standards for

AutoCAD SHX Text Conduit installations by the applicant of an underground project shall

AutoCAD SHX Text adhere to the following guidelines and procedures when installing a conduit

AutoCAD SHX Text system for the Cooperative's use:

AutoCAD SHX Text The applicant is responsible for adhering to Arizona 811 regulations

AutoCAD SHX Text prior to commencement of construction. The applicant is also required to

AutoCAD SHX Text provide all necessary surveying which may be needed to assure that the

AutoCAD SHX Text underground facilities are placed properly within the easement with the

AutoCAD SHX Text correct offsets from property lines, roads, proposed sidewalks, and other

AutoCAD SHX Text utility facilities. The preservation and/or replacement of any existing survey

AutoCAD SHX Text The minimum specifications for conduit installation for use by the

AutoCAD SHX Text

1. The minimum depth of facilities from final grade shall be 24 inches

AutoCAD SHX Text %%uMOHAVE ELECTRIC COOPERATIVE, INC.

AutoCAD SHX Text %%uInstallation Guide for Underground Conduit Systems

AutoCAD SHX Text Mohave Electric Cooperative's approved line extension rules and

AutoCAD SHX Text regulations (Subsection 106-C, Paragraph 2) states "The applicant for an

AutoCAD SHX Text underground extension shall provide at his expense the trenching, back

AutoCAD SHX Text filling (including any imported back fill required), compaction, repaving and

AutoCAD SHX Text earthwork for pull boxes or other preparation for electrical apparatus

AutoCAD SHX Text necessary for the installation of underground facilities, all in accordance with

AutoCAD SHX Text the specifications and schedules of the Cooperative."

AutoCAD SHX Text system for use by the Cooperative.

AutoCAD SHX Text

2. The standard conduit size and type for Cooperative-owned primary

AutoCAD SHX Text and secondary facilities shall be 3 inch (diameter) Schedule 40 Electrical

AutoCAD SHX Text 2 inch (diameter) Scheduled 40 Electrical Grade PVC. Variations from this

AutoCAD SHX Text minimum standard for special installations must be approved in writing by

AutoCAD SHX Text the Cooperative prior to the installation and acceptance of the conduit

AutoCAD SHX Text

3. The minimum sweep size and type for Cooperative-owned primary

AutoCAD SHX Text 600 volts) conduits. Fiber conduits shall be placed at a depth of 36 inches

AutoCAD SHX Text for secondary (below 600 volts) conduits and 48 inches for primary (above

AutoCAD SHX Text The location of these facilities within an equipment room is

AutoCAD SHX Text %%UMetering Locations and Specifications

AutoCAD SHX Text

COOPERATIVE INC.

AutoCAD SHX Text

TYPICAL CONDUIT CONFIGURATION

AutoCAD SHX Text

FOR 1 PHASE & 3 PHASE RISER POLE

AutoCAD SHX Text

2) QUADRANT OF POLE TO BE SPECIFIED

AutoCAD SHX Text

BY MOHAVE ELECTRIC.

AutoCAD SHX Text

5. Mini-Markers are provided by Mohave Electric Cooperative

AutoCAD SHX Text and installed by the contractor.

AutoCAD SHX Text

MINI-MARKER

AutoCAD SHX Text

INSTALLATION

AutoCAD SHX Text

DWN. BY

AutoCAD SHX Text

GARY FISER

AutoCAD SHX Text

ARIZONA 22

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text

REVISED:

AutoCAD SHX Text

DATE

AutoCAD SHX Text 4-16-98

AutoCAD SHX Text 3-29-21

AutoCAD SHX Text 12"

AutoCAD SHX Text

1) USE ONLY 3" CONDUIT

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text 48"

AutoCAD SHX Text %%uNOTES:

AutoCAD SHX Text %%u1 PHASE RISER

AutoCAD SHX Text 1"

AutoCAD SHX Text 4"

AutoCAD SHX Text Y

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text Y

AutoCAD SHX Text

CONDUIT TO SWEEP.

AutoCAD SHX Text

ADD 16" PIECE STRAIGHT

AutoCAD SHX Text 48"

AutoCAD SHX Text

CORRECT LOCATION

AutoCAD SHX Text

OF CONDUIT STUB

AutoCAD SHX Text

OVERHEAD NEUTRAL WIRE

AutoCAD SHX Text %%uSECTION Y-Y

AutoCAD SHX Text

OF CONDUIT STUB

AutoCAD SHX Text

INCORRECT LOCATION

AutoCAD SHX Text

RADIUS PIN

AutoCAD SHX Text

6 FOOT MAXIMUM

AutoCAD SHX Text

3. Hand fill a minimum of six inches of soil over the Mini-Marker and

AutoCAD SHX Text than six feet deep. It cannot re-radiate the locator's signals more

AutoCAD SHX Text

INSTRUCTIONS:

AutoCAD SHX Text tamp down earth. This acts as a shock absorber for the

AutoCAD SHX Text

2. Insert the Mini-Marker over the desired point. Don't bury it more

AutoCAD SHX Text

1. Place a minimum of four inches of dirt over the key point.

AutoCAD SHX Text than six feet from the locator.

AutoCAD SHX Text Mini-Marker when back fill occurs.

AutoCAD SHX Text

OF FIRM SOIL BEFORE

AutoCAD SHX Text

COVER WITH 6 INCHES

AutoCAD SHX Text

4. Back fill hole.

AutoCAD SHX Text

BACK FILL

AutoCAD SHX Text

SEPARATION

AutoCAD SHX Text

SEPARATION FROM

AutoCAD SHX Text

MINIMUM 4 INCHES

AutoCAD SHX Text

FLAT

AutoCAD SHX Text

KEY POINT

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

1 PHASE SECTIONALIZING

AutoCAD SHX Text

CABINET DETAIL

AutoCAD SHX Text %%UDesign Map Symbols

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text

AutoCAD SHX Text ??K01

AutoCAD SHX Text

2. Meters for commercial applications must be located next

AutoCAD SHX Text to the secondary box or transformer.

AutoCAD SHX Text

MOHAVE ELECTRIC

AutoCAD SHX Text Meters/meter bases

AutoCAD SHX Text Cooperative's system are as follows:

AutoCAD SHX Text routine maintenance, and troubleshooting:

AutoCAD SHX Text Specifications for metering installations on Mohave Electric

AutoCAD SHX Text

1. The following equipment shall be situated in an %%Uoutdoor

AutoCAD SHX Text location accessible to Cooperative personnel for meter reading, AutoCAD SHX Text Current Transformers ("CT's")

AutoCAD SHX Text Disconnect Means

AutoCAD SHX Text Test Switches

AutoCAD SHX Text not acceptable.

AutoCAD SHX Text

RADIUS PIN

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

MOHAVE ELECTRIC, INSTALLED BY DEVELOPER

AutoCAD SHX Text

GROUND SLEEVE SUPPLIED BY

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text 8' x 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text 38"

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 6"

AutoCAD SHX Text 12"

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text 4'-11"

AutoCAD SHX Text 3'-10"

AutoCAD SHX Text

CONDUIT REQUIRED

AutoCAD SHX Text

1/2" SPACING BETWEEN

AutoCAD SHX Text C

AutoCAD SHX Text

%%UTYPICAL

AutoCAD SHX Text

CONDUIT STUB-UP DETAIL

AutoCAD SHX Text

3 PHASE SECTIONALIZING CABINET

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text 31"

AutoCAD SHX Text 12"

AutoCAD SHX Text 1'-7"

AutoCAD SHX Text 12"

AutoCAD SHX Text

9-5 13 TERMINAL UC3433-XL

AutoCAD SHX Text

RING TYPE-WITH PROVISIONS FOR TEST SWITCH

AutoCAD SHX Text

4-5 6 TERMINAL UC3436-XL

AutoCAD SHX Text

2) MILBANK OR EQUIVALENT 20 AMP CT RATED

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text 2'-9 3/8"

AutoCAD SHX Text 3'-10"

AutoCAD SHX Text

CONDUIT SYSTEMS

AutoCAD SHX Text

FOR

AutoCAD SHX Text entrance equipment should be directed to Mohave's

AutoCAD SHX Text

(OUTSIDE

AutoCAD SHX Text

INSTALLATION GUIDE

AutoCAD SHX Text

ARIZONA 811

AutoCAD SHX Text

MARICOPA COUNTY)

AutoCAD SHX Text Metering Department at (928) 763-4115.

AutoCAD SHX Text

CALL AT LEAST TWO (2) WORKING DAYS BEFORE YOU DIG

AutoCAD SHX Text

1-800-STAKE-IT

AutoCAD SHX Text 263-1100

AutoCAD SHX Text

3. Provisions for installation of meter and test switches in

AutoCAD SHX Text of the customer. Mohave provides test switches & CT's.

AutoCAD SHX Text an approved service entrance section shall be the responsibility

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text %%UDesign Map Symbols

AutoCAD SHX Text

4. All service locations shall have a 5/8" by 8' copper

AutoCAD SHX Text

5. Questions regarding metering locations should be

AutoCAD SHX Text directed to Mohave's Engineering Department at

AutoCAD SHX Text

6. Questions regarding metering equipment or service

AutoCAD SHX Text

(928) 763-4115.

AutoCAD SHX Text clad ground rod.

AutoCAD SHX Text

CABINET DETAIL

AutoCAD SHX Text

3 PHASE SECTIONALIZING

AutoCAD SHX Text

CONDUIT INSTALLATION GUIDE

AutoCAD SHX Text

AutoCAD SHX Text ??K01

AutoCAD SHX Text

PROPERTY LINE

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text 8' x 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text L

AutoCAD SHX Text

VARIES

AutoCAD SHX Text C

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 12"

AutoCAD SHX Text 6"

AutoCAD SHX Text 16"

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text

ON ROAD SIDE.

AutoCAD SHX Text

CONDUIT REQUIRED

AutoCAD SHX Text

1/2" SPACING BETWEEN

AutoCAD SHX Text

INSTALL FUTURE USE CONDUITS

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text 12"

AutoCAD SHX Text C

AutoCAD SHX Text

UM1-6CS

AutoCAD SHX Text

3 PHASE TRANSFORMER PAD

AutoCAD SHX Text 6'-3 1/2"

AutoCAD SHX Text ??Z01

AutoCAD SHX Text 8' x 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text

12" MIN. RADIUS, 1 1/2" SCHEDULE

AutoCAD SHX Text

40 SWEEPS AS REQUIRED.

AutoCAD SHX Text

CONTRACTOR SUPPLIED

AutoCAD SHX Text

RIGHT SIDE

AutoCAD SHX Text

%%UMETERING SPECIFICATIONS:

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE

AutoCAD SHX Text

SEC

AutoCAD SHX Text

40 SWEEPS AS REQUIRED

AutoCAD SHX Text

CONTRACTOR SUPPLIED

AutoCAD SHX Text

PRI

AutoCAD SHX Text

CONDUCTORS

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

PRIMARY

AutoCAD SHX Text

PRI

AutoCAD SHX Text

SEC

AutoCAD SHX Text

6) PRIMARY SWEEPS TO BE 48" RADIUS

AutoCAD SHX Text

RADIUS 3" SCHEDULE 40 PVC.

AutoCAD SHX Text

WITH BOTTOM OF CONCRETE SLAB.

AutoCAD SHX Text

11) ADDITIONAL EASEMENT REQUIRED.

AutoCAD SHX Text

7) SECONDARY SWEEPS TO BE 24" OR 36"

AutoCAD SHX Text

8) TOP OF GROUND SLEEVE TO BE FLUSH

AutoCAD SHX Text

9) INSTALL FUTURE CONDUITS TOWARDS FRONT.

AutoCAD SHX Text

10) FINAL GRADE IS TO BE ESTABLISHED BY THE

AutoCAD SHX Text

FINANCIALLY RESPONSIBLE FOR RELOCATION

AutoCAD SHX Text

(CONTRACTOR/DEVELOPER). DEVELOPER IS

AutoCAD SHX Text

OF TRANSFORMER PAD DUE TO GRADE CHANGE.

AutoCAD SHX Text

3" SCHEDULE 40 PVC.

AutoCAD SHX Text

EQUIVALENT AS SHOWN.

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

1) IF PULLING SECONDARY CONDUCTORS

AutoCAD SHX Text

2) 3 FT. MIN. CLEARANCE AREA ON

AutoCAD SHX Text

3) 12 FT. MIN. CLEAR WORKING SPACE

AutoCAD SHX Text

BEFORE TRANSFORMER IS SET

AutoCAD SHX Text

5) USE 6-6-10-10 WIRE MESH OR

AutoCAD SHX Text

SWEEPS UNDER GROUND SLEEVE.

AutoCAD SHX Text

OF TRENCH TO ACCOMMODATE FULL

AutoCAD SHX Text

4) ADJUST TRENCH DEPTH ON LAST 20 FT

AutoCAD SHX Text

IN FRONT.

AutoCAD SHX Text

RECOMMENDED TAIL LENGTH.

AutoCAD SHX Text

CONTACT ENGINEERING FOR

AutoCAD SHX Text

SIDES AND REAR.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

TYPICAL CONDUIT STUB UP

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

INSTALLATION GUIDE

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text

8'X 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

3) IF PULLING SECONDARY CONDUCTORS BEFORE TRANSFORMER IS SET

AutoCAD SHX Text

ADD 12" PIECE STRAIGHT CONDUIT TO

AutoCAD SHX Text

SWEEP. STUB END TO FINAL GRADE.

AutoCAD SHX Text 12"

AutoCAD SHX Text 6"

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text 24"

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text

4) 3 FT. MIN. CLEARANCE AREA ON SIDES AND REAR.

AutoCAD SHX Text

5) 12 FT. MIN. CLEAR WORKING SPACE IN FRONT.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text ??G01

AutoCAD SHX Text

FOR TRANSFORMER LOCATION

AutoCAD SHX Text

TOP OF ELECTRIC CONDUIT

AutoCAD SHX Text

TRENCH DEPTH 4' MIN

AutoCAD SHX Text

SIDE LOT LINE

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

PUBLIC UTILITY

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

EASEMENT

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

PRIMARY

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text 6"

AutoCAD SHX Text

CONTACT ENGINEERING FOR RECOMMENDED TAIL LENGTH.

AutoCAD SHX Text

6) PRIMARY SWEEPS TO BE 48" RADIUS 3" SCHEDULE 40 PVC.

AutoCAD SHX Text

7) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF TRANSFORMER PAD DUE TO GRADE CHANGES.

AutoCAD SHX Text

TYPICAL CONDUIT STUB UP FOR

AutoCAD SHX Text

VERTICAL CLEARANCE AT CROSSINGS.

AutoCAD SHX Text

4) TRENCH DEPTH TO BE 2' MINIMUM TOP OF ELECTRIC CONDUIT.

AutoCAD SHX Text

3) GAS, SEWER, AND WATER TO MAINTAIN A MINIMUM 12"

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text

BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text

SERVICE CONDUIT (INSTALLED

AutoCAD SHX Text

8' X 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text 6"

AutoCAD SHX Text

4" MAX

AutoCAD SHX Text

FURNISHED BY MOHAVE ELECTRIC

AutoCAD SHX Text

PEDESTAL BOX (COMPLETE WITH LID)

AutoCAD SHX Text 10"

AutoCAD SHX Text 4"

AutoCAD SHX Text 12"

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text 7"

AutoCAD SHX Text

SERVICES

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

SECONDARY BOX

AutoCAD SHX Text

INSTALLATION GUIDE

AutoCAD SHX Text 7"

AutoCAD SHX Text

SECONDARY BOX LOCATION

AutoCAD SHX Text %%uDesign Map Symbol

AutoCAD SHX Text D01

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

PUBLIC UTILITY

AutoCAD SHX Text

EASEMENT

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

SECONDARY BOX

AutoCAD SHX Text

SIDE LOT LINE

AutoCAD SHX Text

5) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text

IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF SECONDARY BOX DUE TO GRADE CHANGES.

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

4) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF 3 PHASE SECTIONALIZING CABINET DUE TO GRADE CHANGES.

AutoCAD SHX Text

3) PRIMARY SWEEPS TO BE 3" SCHEDULE 40 PVC 48" AS DESIGNATED ON THE PROJECT DESIGN MAP.

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

1/2" SPACING BETWEEN

AutoCAD SHX Text

CONDUIT REQUIRED

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text 8' x 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text

4) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text

IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF VFI CABINET DUE TO GRADE CHANGES.

AutoCAD SHX Text 37"

AutoCAD SHX Text

6) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text

EASEMENT

AutoCAD SHX Text

PUBLIC UTILITY

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

4) 12 FT. MIN. CLEAR WORKING SPACE IN FRONT.

AutoCAD SHX Text

3) 3 FT. MIN. CLEARANCE AREA ON SIDES AND REAR.

AutoCAD SHX Text

(INSTALLED BY CONTRACTOR/DEVELOPER)

AutoCAD SHX Text

FOR SINGLE PHASE VFI LOCATION

AutoCAD SHX Text

TYPICAL CONDUIT STUB UP

AutoCAD SHX Text

8'X 5/8" C.W.C. GROUND ROD

AutoCAD SHX Text

SINGLE PHASE VFI

AutoCAD SHX Text

SWEEP. STUB END TO FINAL GRADE.

AutoCAD SHX Text

ADD 12" PIECE STRAIGHT CONDUIT TO

AutoCAD SHX Text

TRENCH DEPTH 4' MIN

AutoCAD SHX Text

TOP OF ELECTRIC CONDUIT

AutoCAD SHX Text 12"

AutoCAD SHX Text 24"

AutoCAD SHX Text 6"

AutoCAD SHX Text

SINGLE PHASE VFI

AutoCAD SHX Text

PRIMARY

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text

SIDE LOT LINE

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF TRANSFORMER PAD DUE TO GRADE CHANGES.

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

PRIMARY

AutoCAD SHX Text

CONDUIT INSTALLATION GUIDE

AutoCAD SHX Text

1 PHASE VFI CABINET

AutoCAD SHX Text

& PAD

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED

AutoCAD SHX Text

24" OR 36" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED (SEE NOTE)

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED (SEE NOTE)

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED (SEE NOTE)

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED (SEE NOTE)

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

TRENCH DETAIL

AutoCAD SHX Text

1) ALL CONDUIT TO BE 3" SCHEDULE 40 PVC FOR POWER AND 2"

AutoCAD SHX Text

3) SECONDARY SWEEPS TO BE 24" OR 36" RADIUS 3" SCHEDULE 40 PVC.

AutoCAD SHX Text

4) TRENCH DEPTH TO MAINTAIN A MINIMUM OF 48" TO TOP OF CONDUIT.

AutoCAD SHX Text

2) PRIMARY SWEEPS TO BE 48" RADIUS 3" SCHEDULE 40 PVC FOR POWER

AutoCAD SHX Text

DEVELOPER IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF CONDUIT

AutoCAD SHX Text

6) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER).

AutoCAD SHX Text

AND 36" RADIUS 2" SCHEDULE 40 PVC FOR FIBER AS DESIGNATED

AutoCAD SHX Text

DUE TO GRADE CHANGE.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

SCREENED EARTH 3/4 MINUS

AutoCAD SHX Text 2"

AutoCAD SHX Text 48"

AutoCAD SHX Text 12"

AutoCAD SHX Text 24"

AutoCAD SHX Text

MOHAVE ELECTRIC CABLE

AutoCAD SHX Text

3" PRIMARY CONDUIT(S)

AutoCAD SHX Text

3" SECONDARY CONDUIT

AutoCAD SHX Text

(LOCATION OPTIONAL)

AutoCAD SHX Text 6"

AutoCAD SHX Text

WARNING TAPE

AutoCAD SHX Text

(SEE ITEM #5)

AutoCAD SHX Text

STANDARD FILL

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text 23"

AutoCAD SHX Text

3) PRIMARY SWEEPS TO BE 3" SCHEDULE 40 PVC 48" AS DESIGNATED ON THE

AutoCAD SHX Text

IS FINANCIALLY RESPONSIBLE FOR RELOCATION OF SINGLE PHASE SECTIONALIZING CABINET

AutoCAD SHX Text

4) FINAL GRADE IS TO BE ESTABLISHED BY THE (CONTRACTOR/DEVELOPER). DEVELOPER

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

DUE TO GRADE CHANGES.

AutoCAD SHX Text

PROJECT DESIGN MAP.

AutoCAD SHX Text

PROJECT DESIGN MAP.

AutoCAD SHX Text

3) PRIMARY SWEEPS TO BE 3" SCHEDULE 40 PVC 48" AS DESIGNATED ON THE

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

PROJECT DESIGN MAP.

AutoCAD SHX Text

5) PRIMARY SWEEPS TO BE 3" SCHEDULE 40 PVC 48" AS DESIGNATED ON THE

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED

AutoCAD SHX Text

48" RADIUS, 3" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

AS REQUIRED CONTRACTOR SUPPLIED

AutoCAD SHX Text Mohave Electric will normally schedule construction of the underground

AutoCAD SHX Text electric facilities after installation of curb and gutter in subdivisions. In the

AutoCAD SHX Text event the developer requests that Mohave proceed with construction of the

AutoCAD SHX Text electric facilities prior to installation of the curb and gutter, Mohave requires

AutoCAD SHX Text that final grade be marked directly on at least one conduit at each

AutoCAD SHX Text secondary and primary conduit riser location.

AutoCAD SHX Text

SIZE & NUMBER OF SECONDARY CONDUITS

AutoCAD SHX Text

TO BE DETERMINED BY DEVELOPER.

AutoCAD SHX Text

TO DETERMINE IF REMOTE METERING IS REQUIRED.

AutoCAD SHX Text

ALL INSTALLATIONS. CONTACT ENGINEERING

AutoCAD SHX Text

1) REMOTE METERING IS NOT REQUIRED ON

AutoCAD SHX Text

5) ADJUST TRENCH DEPTH ON LAST 20 FT OF TRENCH TO ACCOMMODATE FULL SWEEPS

AutoCAD SHX Text

UNDER VFI CABINET.

AutoCAD SHX Text

7) CONDUIT INSTALLER IS RESPONSIBLE FOR MAINTAINING ADEQUATE CLEARANCE TO OTHER

AutoCAD SHX Text

UTILITY APPURTENANCE.

AutoCAD SHX Text

6) CONDUIT INSTALLER IS RESPONSIBLE FOR MAINTAINING ADEQUATE CLEARANCE TO OTHER

AutoCAD SHX Text

UTILITY APPURTENANCE.

AutoCAD SHX Text

PROVIDED BY CUSTOMER

AutoCAD SHX Text

BY MOHAVE ELECTRIC, INSTALLED

AutoCAD SHX Text

3 PHASE VFI CABINET SUPPLIED

AutoCAD SHX Text

BY DEVELOPER.

AutoCAD SHX Text

INSTALLED AT 24", SCREENED EARTH 3/4 MINUS IS REQUIRED FROM

AutoCAD SHX Text

SECONDARY AND PRIMARY TRENCHES. WHEN SECONDARY CONDUIT IS

AutoCAD SHX Text

5) CLEAN BACKFILL (3/4 INCH MINUS) SHALL BE REQUIRED IN ALL

AutoCAD SHX Text

BOTTOM OF TRENCH TO 6" ABOVE SECONDARY CONDUIT.

AutoCAD SHX Text 6"

AutoCAD SHX Text 18.5"

AutoCAD SHX Text 5"

AutoCAD SHX Text

(SPLITTING PROPERTY LINE)

AutoCAD SHX Text

7) 3 FT. MIN. CLEARANCE AREA ON SIDES.

AutoCAD SHX Text

8) 12 FT. MIN. CLEAR WORKING SPACE IN FRONTS.

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

5) 3 FT. MIN. CLEARANCE AREA ON SIDES AND REAR.

AutoCAD SHX Text

6) 12 FT. MIN. CLEAR WORKING SPACE IN FRONT.

AutoCAD SHX Text

5) 3 FT. MIN. CLEARANCE AREA ON SIDES AND REAR.

AutoCAD SHX Text

6) 12 FT. MIN. CLEAR WORKING SPACE IN FRONT.

AutoCAD SHX Text secondary service conduit. All depths of facilities shall be based on final

AutoCAD SHX Text (12 inches from primary conduits) and on the opposite side of trench of

AutoCAD SHX Text grade top of conduit.

AutoCAD SHX Text Grade PVC. The standard conduit size and type for fiber facilities shall be

AutoCAD SHX Text facilities shall be 36 inches radius, 2 inch diameter Schedule 40 Electrical

AutoCAD SHX Text Utility Easement and on the right-hand side if looking from the roadway.

AutoCAD SHX Text in the trench with a 12" separation.

AutoCAD SHX Text 36"

AutoCAD SHX Text

2" FIBER CONDUIT(S)

AutoCAD SHX Text

SCHEDULE 40 PVC FOR FIBER.

AutoCAD SHX Text

ON THE PROJECT DESIGN MAP.

AutoCAD SHX Text

FIBER PVC TO MAINTAIN A MINIMUM DEPTH OF 36" WITH A SEPARATION OF 12".

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

TYPICAL CONDUIT STUB UP FOR

AutoCAD SHX Text

3) TRENCH DEPTH TO BE 3' MINIMUM TOP OF FIBER CONDUIT.

AutoCAD SHX Text

2) STUB CONDUIT ACCORDING TO DIAGRAM.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

FIBER/SECONDARY BOX

AutoCAD SHX Text

INSTALLATION GUIDE

AutoCAD SHX Text

FIBER BY SECONDARY BOX

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text

PUBLIC UTILITY

AutoCAD SHX Text

EASEMENT

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

SECONDARY BOX

AutoCAD SHX Text

SIDE LOT LINE

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

TRENCH DEPTH 3'

AutoCAD SHX Text

MIN TOP OF

AutoCAD SHX Text

FIBER CONDUIT

AutoCAD SHX Text

36" RADIUS, 2" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

FIBER

AutoCAD SHX Text

TYPICAL CONDUIT STUB UP

AutoCAD SHX Text

FIBER/TRANSFORMER

AutoCAD SHX Text

INSTALLATION GUIDE

AutoCAD SHX Text

FINAL GRADE

AutoCAD SHX Text

(SEE NOTE)

AutoCAD SHX Text

PROPERTY PIN

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

FOR FIBER BY TRANSFORMER

AutoCAD SHX Text

SIDE LOT LINE

AutoCAD SHX Text

OF TRENCH

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

SECONDARY

AutoCAD SHX Text

PUBLIC UTILITY

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

EASEMENT

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

CONDUIT

AutoCAD SHX Text

PRIMARY

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text 6"

AutoCAD SHX Text

3) FIBER SWEEPS TO BE 36" RADIUS 2" SCHEDULE 40 PVC.

AutoCAD SHX Text

1) CENTERLINE OF TRENCH VARIES INSIDE THE PUBLIC UTILITY EASEMENT.

AutoCAD SHX Text

CENTERLINE OF TRENCH WILL BE SHOWN ON EACH PROJECT DESIGN MAP.

AutoCAD SHX Text 6"

AutoCAD SHX Text

2) FIBER STUB UP TO BE MINIMUM 1-6" FROM REAR OF PUBLIC UTILITY

AutoCAD SHX Text

EASEMENT (PUE) AND LOCATED ON THE RIGHT HAND SIDE (LOOKING FROM

AutoCAD SHX Text

TRENCH DEPTH 3'

AutoCAD SHX Text

MIN TOP OF

AutoCAD SHX Text

FIBER CONDUIT

AutoCAD SHX Text

36" RADIUS, 2" SCHEDULE 40 SWEEPS

AutoCAD SHX Text

THE ROADWAY).

AutoCAD SHX Text

FIBER

AutoCAD SHX Text 2'x3' OR 1'X1' VAULT TO BE

AutoCAD SHX Text

INSTALLED BY OTHERS

AutoCAD SHX Text

4) 2'x3' OR 1'X1' VAULT TO BE INSTALLED OVER FIBER CONDUIT STUB-UPS

AutoCAD SHX Text

BY OTHERS.

AutoCAD SHX Text

4) 2'x3' OR 1'X1' VAULT TO BE INSTALLED OVER FIBER CONDUIT STUB-UPS

AutoCAD SHX Text

BY OTHERS.

AutoCAD SHX Text

FROM REAR OF PUE

AutoCAD SHX Text

FIBER CONDUIT MIN 1'6"

AutoCAD SHX Text 2'x3' OR 1'X1' VAULT TO

AutoCAD SHX Text

BE INSTALLED BY OTHERS

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text

FROM REAR OF PUE

AutoCAD SHX Text

FIBER CONDUIT MIN 1'6"

1'-6"