Attachment 2 - Drawings and Specifications (MAT-A-1169-O).pdf

16.460 16.350

A

A

.063

B

SECTION A-A

9.

.063

7.

U

CRIMP EQUAL BOTH SIDES

.085 MAX

DETAIL B

SCALE 12 : 1

8.

10. 10.

U

U

THIS DRAWING HAS BEEN

GENERATED AND IS MAINTAINED

BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED

AS DIRECTED BY THE DESIGN

ACTIVITY.

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

O IAW EO2024A0001 6/25/2024

O A A - - - - - - - REV

REV STATUS

OF SHEETS

1 2 3 4 5 6 7 8 9 10 SH

MAT-A-3460 AARE

NEXT ASSY USED ON

APPLICATION

QTY. NOMENCLATURE CAGE CODE IDENTIFYING NO. MATERIAL SPECIFICATION UNIT

WT.

FIND

NO.

1 WIRE MESH, FILTER SCREEN ASSEMBLY 31806 MAT-A-1169-100 304 OR 316 SS 0.3 2

1 RING, FILTER SCREEN ASSEMBLY 31806 MAT-A-1169-200 304 OR 316 SS 0.1 1

UNCLASSIFIED

UNCLASSIFIED

DISTRIBUTION STATEMENT C

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS FOR ADMINISTRATIVE AND OPERATIONAL USE;

EFFECTIVE 20240626. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO CRYPTOLOGIC AND CYBER SYSTEMS DIVISION, 230 HALL BLVD., SAN ANTONIO, TX. 78243.

DESTRUCTION NOTICE

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THIS DOCUMENT.

PROJECT

ENGINEER

SCREEN ASSEMBLY,

FILTER, U-1 FOIL

.1

.003

.01

NOTES:

DRAWING PREPARED IAW ASME Y14.100 INCLUDING APPENDICES B THROUGH E. INTERPRET DIMENSIONING AND TOLERANCING1.

IAW ASME Y14.5M - 2009.

ALL DIMENSIONS ARE PRIOR TO SURFACE FINISH UNLESS OTHERWISE SPECIFIED.2.

SURFACE FINISH IS 63 RMS OR BETTER UNLESS OTHERWISE SPECIFIED.3.

BREAK ALL CORNER AND SHARP EDGES .005-.010, RADIUS ON INSIDE CORNERS .015 MAX.4.

MARK PART -200 WITH LABEL "MAT-A-1169-O", 0.1875" FONT HEIGHT, CENTERED ON RING FACE PER MIL-STD-130N, TABLE II, LASER.5.

DRAWING IS MADE TO BLOCK SCALE UNLESS OTHERWISE SPECIFIED.6.

CLOSE RING AFTER INSERTING WIRE MESH BY SEAM WELDING JOINT ON EXTERIOR FACE. WELD SHALL BE FLATTENED AND HAVE A7.

63RMS OR BETTER SURFACE FINISH.

INTERCRIMP MESH REQUIRES 0.25" SPACING/3 CRIMPS PER OPENING, CRIMP APPROXIMATELY EVERY 0.100". CRIMP ON BOTH8.

SIDES EQUALLY.

FLATNESS MEASURED FROM TANGENT EDGE AFTER CRIMP AND WELD. ENTIRE ASEMBLY MUST LIE BETWEEN TWO PARALLEL PLANES9.

0.185" APART WITH RIM UNRESTRAINED AND 0.115" APART WITH RIM RESTRAINED.

FASTEN MESH INTO RIM BY RESISTANCE SEAM WELDING EACH WIRE OF MAT-A-1169-100 INTO MAT-A-1169-200 IN ACCORDANCE10.

WITH AMS-W-6858A, GROUP 2, CLASS B.

REFERENCE 3D CAD FILE: MAT-A-1169-O.STEP.11.

BEFORE DEVIATING FROM DRAWING, PROPOSED DRAWING CHANGES WILL BE ROUTED THROUGH CCSD VIA THE FORMAL12.

ENGINEERING CHANGE ORDER PROCESS OR OTHER AGREED UPON CONTRACTUAL PROCESS.

MAT-A-116931806

1:2 1 OF 3

.5

Engineering Drawing Layout - DAFMC Form 1655, 20150330

THIRD ANGLE PROJECTION

U.S. AIR FORCE

CRYPTOLOGIC AND CYBER SYSTEMS DIVISION

_+.X

DO NOT SCALE DRAWING

_+.XX

+.XXX

SHDWG NO.

18 57 6 4 3 1

8 57 6 4 3 2 1

D

C

B

A

D

C

B

A

CAGE CODE

CURRENT

TITLE

D

DWG NO.

SHEETWEIGHT

CAGE CODESIZE

SCALE

CHECKER

AIR FORCE

RELEASE

AIR FORCE

AUTHENTICATION

CONTRACT NO.

ENGINEERING

APPROVAL

DRAFTER_+ _+

ANGLESDECIMALSFRACTIONS

DIMENSIONS ARE IN INCHES-TOLERANCES ON:

UNLESS OTHERWISE SPECIFIED

FINISH

TREATMENT

MAT-A-1169

PARTS LIST

N/A

63 RMS OR BETTER

SHEET

REVISION

O

16.350±.010 C

.062 .050

DETAIL C

SCALE 12 : 1

CL

.010

QTY. NOMENCLATURE CAGE CODE IDENTIFYING NO. MATERIAL SPECIFICATION UNIT

WT.

FIND

NO.

1 WIRE MESH, FILTER SCREEN ASSEMBLY 31806 MAT-A-1169-100 304 OR 316 SS 0.3 1

MATERIAL SPECIFICATION

MESH TYPE SQUARE

CONSTRUCTION TYPE WOVEN

PRIMARY MATERIAL 304 STAINLESS STEEL

WEAVE OR TRIM TYPE WOVEN - PLAIN WEAVE

PERCENT OPEN AREA 79%

MESH SIZE #4 OR 4X4

OPENING SIZE 0.2220 X 0.2220

WIRE DIAMETER/WIRE GAUGE 0.028" (22 1/4 GAUGE)

SUPPLIER CAGE OJXJ3

UNCLASSIFIED

UNCLASSIFIED

SCREEN ASSEMBLY,

FILTER, U-1 FOIL

.1

.003

.01

MAT-A-116931806

1:1 2 OF 3

.5

Engineering Drawing Layout - DAFMC Form 1655, 20150330

THIRD ANGLE PROJECTION

U.S. AIR FORCE

CRYPTOLOGIC AND CYBER SYSTEMS DIVISION

_+.X

DO NOT SCALE DRAWING

_+.XX

+.XXX

SHDWG NO.

28 57 6 4 3 1

8 57 6 4 3 2 1

D

C

B

A

D

C

B

A

CAGE CODE

CURRENT

TITLE

D

DWG NO.

SHEETWEIGHT

CAGE CODESIZE

SCALE

ANGLESDECIMALSFRACTIONS

DIMENSIONS ARE IN INCHES -TOLERANCES ON:

UNLESS OTHERWISE SPECIFIED

FINISH

TREATMENT

MAT-A-1169

sw- mass

63 RMS OR BETTER

N/A

DISTRIBUTION STATEMENT C

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES

AND THEIR CONTRACTORS FOR ADMINISTRATIVE AND

OPERATIONAL USE; EFFECTIVE 20240626. OTHER REQUESTS FOR

THIS DOCUMENT SHALL BE REFERRED TO CRYPTOLOGIC AND

CYBER SYSTEMS DIVISION, 230 HALL BLVD., SAN ANTONIO, TX.

78243.

DESTRUCTION NOTICE

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THIS DOCUMENT.

A

SHEET

16.460 16.350

15.774±.015

AA

5.

.063

.063

D

SECTION A-A

.085 MAX

.010±.003 R.043

.343±.010

DETAIL D

SCALE 12 : 1 63

.063

QTY. NOMENCLATURE CAGE CODE IDENTIFYING NO. MATERIAL SPECIFICATION UNIT

WT.

FIND

NO.

1 RING, FILTER SCREEN ASSEMBLY 31806 MAT-A-1169-200 304 OR 316 SS 0.1 1

UNCLASSIFIED

UNCLASSIFIED

SCREEN ASSEMBLY,

FILTER, U-1 FOIL

.1

.003

.01

MAT-A-116931806

1:1 3 OF 3

.5

Engineering Drawing Layout - DAFMC Form 1655, 20150330

THIRD ANGLE PROJECTION

U.S. AIR FORCE

CRYPTOLOGIC AND CYBER SYSTEMS DIVISION

_+.X

DO NOT SCALE DRAWING

_+.XX

+.XXX

SHDWG NO.

38 57 6 4 3 1

8 57 6 4 3 2 1

D

C

B

A

D

C

B

A

CAGE CODE

CURRENT

TITLE

D

DWG NO.

SHEETWEIGHT

CAGE CODESIZE

SCALE

ANGLESDECIMALSFRACTIONS

DIMENSIONS ARE IN INCHES -TOLERANCES ON:

UNLESS OTHERWISE SPECIFIED

FINISH

TREATMENT

MAT-A-1169

sw- mass

63 RMS OR BETTER

N/A

DISTRIBUTION STATEMENT C

DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES

AND THEIR CONTRACTORS FOR ADMINISTRATIVE AND

OPERATIONAL USE; EFFECTIVE 20240626. OTHER REQUESTS FOR

THIS DOCUMENT SHALL BE REFERRED TO CRYPTOLOGIC AND

CYBER SYSTEMS DIVISION, 230 HALL BLVD., SAN ANTONIO, TX.

78243.

DESTRUCTION NOTICE

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THIS DOCUMENT.

A

SHEET

ISO-10303-21;

HEADER;

FILE_DESCRIPTION (( 'STEP AP214' ),

'1' );

FILE_NAME ('MAT-A-1169-O.STEP',

'2024-06-27T20:12:06', 'SwSTEP 2.0', 'SolidWorks 2020', FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));

ENDSEC;

DATA;

#1 = CARTESIAN_POINT ( 'NONE', ( 7.935302604338139609, -0.2436135034211684147, 0.04249999999999995448 ) ) ;

#2 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#3 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#4 = DIRECTION ( 'NONE', ( -0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;

#5 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#6 = CARTESIAN_POINT ( 'NONE', ( 8.061858864794553270, 1.027536078661812624, 0.04249999999999996836 ) ) ;

#7 = EDGE_CURVE ( 'NONE', #168, #1873, #2463, .T. ) ;

#8 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#9 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 8.224639320935205333, 0.02139069441923344486 ) ) ;

#10 = ORIENTED_EDGE ( 'NONE', *, *, #1565, .T. ) ;

#11 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;

#12 = CARTESIAN_POINT ( 'NONE', ( 7.980487367005993704, 0.6208628214999676320, 0.04249999999999995448 ) ) ;

#13 = APPLICATION_CONTEXT ( 'automotive_design' ) ;

#14 = LINE ( 'NONE', #1674, #1748 ) ;

#15 = CARTESIAN_POINT ( 'NONE', ( 7.914331122743574198, 0.6140702310923132901, 0.04249999999999994754 ) ) ;

#16 = SHAPE_DEFINITION_REPRESENTATION ( #885, #2162 ) ;

#17 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000919, 8.213469764182068644, 0.01999335328735726836 ) ) ;

#18 = AXIS2_PLACEMENT_3D ( 'NONE', #1230, #2602, #744 ) ;

#20 = VECTOR ( 'NONE', #366, 39.37007874015748854 ) ;

#19 = FACE_BOUND ( 'NONE', #2148, .T. ) ;

#21 = CARTESIAN_POINT ( 'NONE', ( 8.068122661340460411, 0.5552466371954049018, 0.04249999999999998224 ) ) ;

#22 = CARTESIAN_POINT ( 'NONE', ( 8.081770013592253221, 0.6274669188313386492, 0.04249999999999996836 ) ) ;

#23 = CARTESIAN_POINT ( 'NONE', ( 8.064670190276673978, 0.7715107214325219731, 0.04249999999999995448 ) ) ;

#24 = ORIENTED_EDGE ( 'NONE', *, *, #2165, .T. ) ;

#25 = CARTESIAN_POINT ( 'NONE', ( 8.006538596585050627, 0.7492871981936362058, 0.04249999999999994754 ) ) ;

#26 = PRESENTATION_STYLE_ASSIGNMENT (( #1463 ) ) ;

#27 = EDGE_LOOP ( 'NONE', ( #1652, #795, #2021, #2230, #1845, #1638, #957, #144 ) ) ;

#28 = ADVANCED_FACE ( 'NONE', ( #1429 ), #2259, .F. ) ;

#29 = CARTESIAN_POINT ( 'NONE', ( 7.987306544468593117, 0.8077264472338170354, 0.04249999999999996836 ) ) ;

#30 = CARTESIAN_POINT ( 'NONE', ( 7.894479328841522481, 1.012585580925838613, 0.04249999999999995448 ) ) ;

#31 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#32 = CARTESIAN_POINT ( 'NONE', ( 8.049173671318488488, 0.7171523642678262478, 0.04249999999999996836 ) ) ;

#33 = CARTESIAN_POINT ( 'NONE', ( 8.035241065088721157, 1.072140396363860049, 0.04249999999999996836 ) ) ;

#34 = CARTESIAN_POINT ( 'NONE', ( 7.977782901591936593, 1.067984880676993598, 0.04249999999999998224 ) ) ;

#35 = EDGE_LOOP ( 'NONE', ( #2513, #2525, #2014, #1125, #399 ) ) ;

#36 = CYLINDRICAL_SURFACE ( 'NONE', #2591, 7.887000000000000455 ) ;

#37 = ORIENTED_EDGE ( 'NONE', *, *, #2047, .F. ) ;

#38 = VECTOR ( 'NONE', #509, 39.37007874015748854 ) ;

#39 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;

#40 = CARTESIAN_POINT ( 'NONE', ( 7.914439147594690027, 0.6035992917591155305, 0.04249999999999994754 ) ) ;

#41 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#42 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 8.187499618320646988, 0.03249999999999999417 ) ) ;

#43 = EDGE_CURVE ( 'NONE', #375, #1937, #82, .T. ) ;

#44 = SURFACE_SIDE_STYLE ('',( #1270 ) ) ;

#45 = ADVANCED_FACE ( 'NONE', ( #1037 ), #1257, .T. ) ;

#46 = LINE ( 'NONE', #2534, #1612 ) ;

#47 = COLOUR_RGB ( '',0.7764705882352941346, 0.7568627450980391913, 0.7372549019607843590 ) ;

#48 = CARTESIAN_POINT ( 'NONE', ( 7.997514948158212178, 1.090556400573794438, 0.04249999999999996836 ) ) ;

#49 = FACE_BOUND ( 'NONE', #961, .T. ) ;

#50 = ORIENTED_EDGE ( 'NONE', *, *, #2245, .T. ) ;

#51 = CARTESIAN_POINT ( 'NONE', ( 7.920602153893726793, 1.081318130989720405, 0.04249999999999995448 ) ) ;

#52 = ORIENTED_EDGE ( 'NONE', *, *, #772, .T. ) ;

#53 = ORIENTED_EDGE ( 'NONE', *, *, #838, .F. ) ;

#54 = CARTESIAN_POINT ( 'NONE', ( 7.960187344710075052, 0.6373282581052693851, 0.04249999999999996836 ) ) ;

#55 = PLANE ( 'NONE', #2249 ) ;

#56 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 8.196013156876254868, -0.03165040296084496024 ) ) ;

#57 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#58 = AXIS2_PLACEMENT_3D ( 'NONE', #2532, #246, #1678 ) ;

#59 = CARTESIAN_POINT ( 'NONE', ( 8.060059278507885949, 0.5520901163534067679, 0.04249999999999995448 ) ) ;

#60 = EDGE_CURVE ( 'NONE', #319, #227, #46, .T. ) ;

#61 = VECTOR ( 'NONE', #2517, 39.37007874015748143 ) ;

#62 = CARTESIAN_POINT ( 'NONE', ( 7.766259793752388951, 8.157383977822144416, 0.04249999999999995448 ) ) ;

#63 = VERTEX_POINT ( 'NONE', #1880 ) ;

#64 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#65 = ORIENTED_EDGE ( 'NONE', *, *, #2130, .F. ) ;

#66 = ORIENTED_EDGE ( 'NONE', *, *, #2043, .F. ) ;

#67 = CARTESIAN_POINT ( 'NONE', ( 8.006336965427676589, 0.5664560777639426892, 0.04249999999999994754 ) ) ;

#68 = CARTESIAN_POINT ( 'NONE', ( 8.074107926680131442, 0.7501843799261247447, 0.04249999999999994754 ) ) ;

#69 = LINE ( 'NONE', #463, #1449 ) ;

#70 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999998751, 8.219149848868291031, -0.008513252316320118335 ) ) ;

#71 = LINE ( 'NONE', #300, #1011 ) ;

#72 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#73 = EDGE_CURVE ( 'NONE', #1709, #1936, #1394, .T. ) ;

#74 = VERTEX_POINT ( 'NONE', #1271 ) ;

#75 = CARTESIAN_POINT ( 'NONE', ( 8.020102029822924194, 0.9565966022217016196, 0.04249999999999996836 ) ) ;

#76 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .F. ) ;

#77 = ORIENTED_EDGE ( 'NONE', *, *, #803, .T. ) ;

#78 = CARTESIAN_POINT ( 'NONE', ( 8.121901162030447097, -0.1594037678442464523, 0.04249999999999995448 ) ) ;

#79 = CARTESIAN_POINT ( 'NONE', ( 7.981083528063701138, 0.6033910237219596295, 0.04249999999999994060 ) ) ;

#80 = CARTESIAN_POINT ( 'NONE', ( 7.934747652120090144, 0.6163465427233959515, 0.04249999999999995448 ) ) ;

#81 = AXIS2_PLACEMENT_3D ( 'NONE', #1773, #1829, #1161 ) ;

#82 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #2078, #222, #1894, #454, #659, #248, #2507, #1052, #1648, #1693, #615, #1868, #1066, #32, #2117 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.1250362424302791098, 0.2416368503265395873, 0.3526209635635728645, 0.4632429459677885886, 0.5201825293777234682, 0.5785419928334700757, 0.6389820309436298196, 0.7032071861290947190, 0.7709922648768259279, 0.8430736903332819443, 0.9194115121807686641, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#83 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 8.204465702019241746, 0.02900133909623229395 ) ) ;

#84 = CIRCLE ( 'NONE', #2495, 7.887000000000000455 ) ;

#85 = CARTESIAN_POINT ( 'NONE', ( 8.204918170043212555, -0.03099999999999999978, -8.208642922136945685 ) ) ;

#86 = CARTESIAN_POINT ( 'NONE', ( -8.187500000000044409, 0.000000000000000000, -0.04250000000000002387 ) ) ;

#87 = ORIENTED_EDGE ( 'NONE', *, *, #2026, .T. ) ;

#88 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1387, #2029 ) ;

#89 = ORIENTED_EDGE ( 'NONE', *, *, #1946, .F. ) ;

#90 = CARTESIAN_POINT ( 'NONE', ( 8.001567894039162354, 0.2751041621408838456, 0.04249999999999995448 ) ) ;

#91 = VERTEX_POINT ( 'NONE', #1918 ) ;

#92 = ORIENTED_EDGE ( 'NONE', *, *, #694, .T. ) ;

#93 = EDGE_CURVE ( 'NONE', #2501, #677, #574, .T. ) ;

#94 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#95 = DIRECTION ( 'NONE', ( -0.9994098782644464940, -0.03434960301727179449, 0.000000000000000000 ) ) ;

#96 = CARTESIAN_POINT ( 'NONE', ( 8.067208289305000335, 0.1731781276808730674, 0.04249999999999995448 ) ) ;

#97 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #848, #1498 ) ;

#98 = DIRECTION ( 'NONE', ( -0.9984366694599047243, 0.05589469632991019704, 0.000000000000000000 ) ) ;

#99 = DIRECTION ( 'NONE', ( 0.9984342781800221722, -0.05593739496202993627, 0.000000000000000000 ) ) ;

#100 = ORIENTED_EDGE ( 'NONE', *, *, #1752, .F. ) ;

#101 = CARTESIAN_POINT ( 'NONE', ( 3.824359606312194071, -1.594357426630895969, 0.04249999999999995448 ) ) ;

#102 = ORIENTED_EDGE ( 'NONE', *, *, #1917, .F. ) ;

#103 = VERTEX_POINT ( 'NONE', #2327 ) ;

#104 = LINE ( 'NONE', #2389, #1664 ) ;

#105 = CARTESIAN_POINT ( 'NONE', ( 8.027232926680131442, 0.7444001251184323431, 0.04249999999999994754 ) ) ;

#106 = CARTESIAN_POINT ( 'NONE', ( 7.933107550237349592, 0.6069442137274715376, 0.04249999999999991979 ) ) ;

#107 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #1691, 'distance_accuracy_value', 'NONE');

#108 = EDGE_CURVE ( 'NONE', #1464, #156, #214, .T. ) ;

#109 = CARTESIAN_POINT ( 'NONE', ( 7.958931564038282502, 0.6836576231294650974, 0.04249999999999995448 ) ) ;

#110 = PLANE ( 'NONE', #1301 ) ;

#111 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ;

#112 = CARTESIAN_POINT ( 'NONE', ( 8.092737734372439817, 0.7514614231953554713, 0.04249999999999996836 ) ) ;

#113 = VERTEX_POINT ( 'NONE', #1243 ) ;

#114 = ORIENTED_EDGE ( 'NONE', *, *, #1072, .T. ) ;

#115 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #567, #2417, #1220, #2630, #770, #1600, #1613, #2431, #1207, #2041, #1395, #542, #2444, #336, #2237, #377, #1367, #2027, #170 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.07258069804409073011, 0.1423757838839341261, 0.2091721135239772433, 0.2740319792214481742, 0.3370941939982550206, 0.3994388131648913820, 0.4612571817625810144, 0.5237424667129569889, 0.5854774769862511885, 0.6455449200008620547, 0.7043482418072146700, 0.7623478621165451496, 0.8200512550875758144, 0.8786273084903174491, 0.9382772980261160356, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#116 = CARTESIAN_POINT ( 'NONE', ( -1.791107878104667872, 3.498915677444576655, 0.04249999999999995448 ) ) ;

#117 = CARTESIAN_POINT ( 'NONE', ( 8.004296995453477948, 0.7829816831764172536, 0.04249999999999994754 ) ) ;

#118 = LINE ( 'NONE', #1975, #145 ) ;

#119 = EDGE_CURVE ( 'NONE', #1581, #1936, #2439, .T. ) ;

#120 = CARTESIAN_POINT ( 'NONE', ( 7.967479802795165433, 0.5469212456190183369, 0.04249999999999997530 ) ) ;

#121 = CIRCLE ( 'NONE', #1641, 7.887000000000000455 ) ;

#122 = EDGE_CURVE ( 'NONE', #811, #930, #2093, .T. ) ;

#123 = CARTESIAN_POINT ( 'NONE', ( 7.965529228555764618, 0.6834747757693578896, 0.04249999999999994754 ) ) ;

#124 = CARTESIAN_POINT ( 'NONE', ( 8.121713361549678822, -0.1840056308250150874, 0.04249999999999995448 ) ) ;

#125 = ORIENTED_EDGE ( 'NONE', *, *, #1752, .T. ) ;

#126 = VECTOR ( 'NONE', #1526, 39.37007874015748143 ) ;

#127 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 8.187500000000044409, -0.04250000000000002387 ) ) ;

#128 = CARTESIAN_POINT ( 'NONE', ( 7.872528064020134053, 1.004726576594580534, 0.04249999999999994754 ) ) ;

#129 = ORIENTED_EDGE ( 'NONE', *, *, #1537, .T. ) ;

#130 = EDGE_LOOP ( 'NONE', ( #1029, #755, #1995, #1722 ) ) ;

#131 = AXIS2_PLACEMENT_3D ( 'NONE', #1824, #789, #2241 ) ;

#132 = LINE ( 'NONE', #1026, #796 ) ;

#133 = CARTESIAN_POINT ( 'NONE', ( 7.950220181396670860, 0.9155829009761077275, 0.04249999999999997530 ) ) ;

#134 = CARTESIAN_POINT ( 'NONE', ( 8.031326542214102915, 0.5733552058371838012, 0.04249999999999996836 ) ) ;

#135 = CARTESIAN_POINT ( 'NONE', ( 7.956656695671612489, 0.6599018758937308382, 0.04249999999999995448 ) ) ;

#136 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );

#137 = CARTESIAN_POINT ( 'NONE', ( 7.873385193533240844, 0.9922300603839611099, 0.04249999999999995448 ) ) ;

#138 = VERTEX_POINT ( 'NONE', #425 ) ;

#139 = EDGE_CURVE ( 'NONE', #1213, #1071, #1136, .T. ) ;

#140 = CARTESIAN_POINT ( 'NONE', ( -0.4485257287840955787, -0.1180439391466596988, 0.04249999999999995448 ) ) ;

#141 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#142 = ORIENTED_EDGE ( 'NONE', *, *, #2384, .T. ) ;

#143 = CIRCLE ( 'NONE', #2316, 8.187500000000044409 ) ;

#144 = ORIENTED_EDGE ( 'NONE', *, *, #1490, .T. ) ;

#145 = VECTOR ( 'NONE', #2376, 39.37007874015748854 ) ;

#146 = LINE ( 'NONE', #1165, #515 ) ;

#147 = CARTESIAN_POINT ( 'NONE', ( 7.969525998334067829, 0.9403088270679342831, 0.04249999999999997530 ) ) ;

#148 = FACE_OUTER_BOUND ( 'NONE', #2243, .T. ) ;

#149 = CARTESIAN_POINT ( 'NONE', ( 8.044651965699737062, 0.9478800611862087111, 0.04249999999999995448 ) ) ;

#150 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );

#151 = CARTESIAN_POINT ( 'NONE', ( 7.948467654703548213, 0.7771610869717860970, 0.04249999999999994060 ) ) ;

#152 = VERTEX_POINT ( 'NONE', #1717 ) ;

#153 = ADVANCED_FACE ( 'NONE', ( #2547 ), #685, .F. ) ;

#154 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#155 = CARTESIAN_POINT ( 'NONE', ( 7.885268175957975245, 1.050187620111173947, 0.04249999999999993366 ) ) ;

#156 = VERTEX_POINT ( 'NONE', #2475 ) ;

#157 = ORIENTED_EDGE ( 'NONE', *, *, #603, .F. ) ;

#158 = CARTESIAN_POINT ( 'NONE', ( 7.873846427531335124, 0.9890622546296017337, 0.04249999999999997530 ) ) ;

#159 = CARTESIAN_POINT ( 'NONE', ( 8.011707278230151275, 0.8090740634236894824, 0.04249999999999998224 ) ) ;

#160 = CARTESIAN_POINT ( 'NONE', ( 8.043946359133153479, 0.5729126932014232398, 0.04249999999999995448 ) ) ;

#161 = CARTESIAN_POINT ( 'NONE', ( -0.06468411105218949131, -0.01739837057726118658, 0.04249999999999995448 ) ) ;

#162 = LINE ( 'NONE', #1173, #1229 ) ;

#163 = AXIS2_PLACEMENT_3D ( 'NONE', #2184, #1533, #1939 ) ;

#164 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ;

#165 = CARTESIAN_POINT ( 'NONE', ( 8.102149750801922679, -0.5971416155907003365, 0.04249999999999995448 ) ) ;

#166 = CARTESIAN_POINT ( 'NONE', ( 7.874381689854764055, 1.022741036491533251, 0.04249999999999994754 ) ) ;

#167 = ORIENTED_EDGE ( 'NONE', *, *, #2452, .T. ) ;

#168 = VERTEX_POINT ( 'NONE', #2634 ) ;

#169 = EDGE_CURVE ( 'NONE', #2372, #2345, #993, .T. ) ;

#170 = CARTESIAN_POINT ( 'NONE', ( 8.027232926680131442, 0.7444001251184323431, 0.04249999999999994754 ) ) ;

#171 = CARTESIAN_POINT ( 'NONE', ( 7.998060787418901363, 8.013588012462774302, 0.04249999999999995448 ) ) ;

#172 = AXIS2_PLACEMENT_3D ( 'NONE', #2393, #938, #57 ) ;

#173 = ADVANCED_FACE ( 'NONE', ( #2031, #368 ), #2677, .T. ) ;

#174 = CARTESIAN_POINT ( 'NONE', ( 7.964379518390774848, 0.8044563869653366117, 0.04249999999999996836 ) ) ;

#175 = CARTESIAN_POINT ( 'NONE', ( 8.048250369947442806, 0.9524826415750474728, 0.04249999999999994060 ) ) ;

#176 = FACE_BOUND ( 'NONE', #825, .T. ) ;

#177 = CARTESIAN_POINT ( 'NONE', ( 7.970780102160900604, 0.7073283102145863088, 0.04249999999999994754 ) ) ;

#178 = ORIENTED_EDGE ( 'NONE', *, *, #1889, .T. ) ;

#179 = CLOSED_SHELL ( 'NONE', ( #2540, #503, #2592, #1632 ) ) ;

#180 = DIRECTION ( 'NONE', ( -0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;

#181 = FACE_OUTER_BOUND ( 'NONE', #2139, .T. ) ;

#182 = CARTESIAN_POINT ( 'NONE', ( 8.068219289815031559, 0.6649111218277102830, 0.04249999999999994060 ) ) ;

#183 = EDGE_LOOP ( 'NONE', ( #2600, #1775 ) ) ;

#184 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;

#185 = CARTESIAN_POINT ( 'NONE', ( 8.067981454022548959, 0.03915742276919505910, 0.04249999999999995448 ) ) ;

#186 = VECTOR ( 'NONE', #307, 39.37007874015748143 ) ;

#187 = LINE ( 'NONE', #2472, #2275 ) ;

#188 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #2336, 'design' ) ;

#189 = VECTOR ( 'NONE', #1237, 39.37007874015748143 ) ;

#190 = CARTESIAN_POINT ( 'NONE', ( 7.971543074661013861, 0.8057826333555984100, 0.04249999999999994060 ) ) ;

#191 = CARTESIAN_POINT ( 'NONE', ( 7.937766329023553169, 0.6528851080699246134, 0.04249999999999991979 ) ) ;

#192 = CARTESIAN_POINT ( 'NONE', ( 7.950381577314706405, -0.3350068176881862425, 0.04249999999999995448 ) ) ;

#193 = EDGE_CURVE ( 'NONE', #2345, #1551, #1211, .T. ) ;

#194 = CARTESIAN_POINT ( 'NONE', ( 7.961765679083977254, 0.7798568558876631807, 0.04249999999999994754 ) ) ;

#195 = VERTEX_POINT ( 'NONE', #1197 ) ;

#196 = CARTESIAN_POINT ( 'NONE', ( 8.115637906058394080, 0.3501492342562696480, 0.04249999999999995448 ) ) ;

#197 = CARTESIAN_POINT ( 'NONE', ( 8.073455693929398436, 0.7551347026252742678, 0.04249999999999995448 ) ) ;

#198 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 8.208898076106622810, -0.03713886069893443387 ) ) ;

#199 = ORIENTED_EDGE ( 'NONE', *, *, #2467, .T. ) ;

#200 = ORIENTED_EDGE ( 'NONE', *, *, #2299, .F. ) ;

#201 = FACE_BOUND ( 'NONE', #689, .T. ) ;

#202 = CARTESIAN_POINT ( 'NONE', ( 8.187500000000044409, 1.002679566801900928E-15, 0.04250000000000002387 ) ) ;

#203 = CARTESIAN_POINT ( 'NONE', ( 7.928260324644499590, 0.7898317390100126900, 0.04249999999999995448 ) ) ;

#204 = DIRECTION ( 'NONE', ( 0.9633569520383082896, 0.2682226369258577381, -0.000000000000000000 ) ) ;

#205 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 8.187500000000044409, -0.03249999999999999417 ) ) ;

#206 = DIRECTION ( 'NONE', ( -0.9922019994874838877, -0.1246402511752879305, 0.000000000000000000 ) ) ;

#207 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#208 = EDGE_CURVE ( 'NONE', #1984, #2425, #568, .T. ) ;

#209 = CARTESIAN_POINT ( 'NONE', ( 8.055980895913805284, 1.044015473647539549, 0.04249999999999996836 ) ) ;

#210 = CARTESIAN_POINT ( 'NONE', ( 7.974432619725900118, 0.2828791406230631855, 0.04249999999999994754 ) ) ;

#211 = CARTESIAN_POINT ( 'NONE', ( -0.002500000000000000052, 8.208904731221219109, 0.03713460654705465908 ) ) ;

#212 = ORIENTED_EDGE ( 'NONE', *, *, #823, .F. ) ;

#213 = ORIENTED_EDGE ( 'NONE', *, *, #2467, .F. ) ;

#214 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #465, #2315, #1679, #2106, #632, #59, #21, #1705, #2289, #645, #2496, #413, #1077, #1906, #874, #1296, #673, #2480, #2276 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.09261832840202577355, 0.1783747586942721064, 0.2581138523802257723, 0.3321857752638563976, 0.4004719922873259952, 0.4640947487000514071, 0.5234854272711948475, 0.5797095316591287517, 0.6335554329405266305, 0.6860488133798398058, 0.7372086854396191491, 0.7881175843438311679, 0.8388795092161664968, 0.8910030487053520742, 0.9445075833506734186, 0.9999999999999998890 ), .UNSPECIFIED. ) ;

#215 = CARTESIAN_POINT ( 'NONE', ( 8.006687554083978142, 0.7480058943492017276, 0.04249999999999994754 ) ) ;

#216 = FILL_AREA_STYLE_COLOUR ( '', #886 ) ;

#217 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #890, #1909 ) ;

#218 = DIRECTION ( 'NONE', ( -0.01595541549343833243, 0.9998727042561125211, 0.000000000000000000 ) ) ;

#219 = CARTESIAN_POINT ( 'NONE', ( 7.960364410557892789, 0.07436246095430958103, 0.04249999999999995448 ) ) ;

#220 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, -0.04250000000000002387 ) ) ;

#221 = PRESENTATION_STYLE_ASSIGNMENT (( #453 ) ) ;

#222 = CARTESIAN_POINT ( 'NONE', ( 8.074229055655568033, 0.7482298819780001109, 0.04249999999999996836 ) ) ;

#223 = CARTESIAN_POINT ( 'NONE', ( 8.079902333210627674, 0.6304066925745717143, 0.04249999999999996836 ) ) ;

#224 = CARTESIAN_POINT ( 'NONE', ( 8.037601123252727575, 0.7848060835770266364, 0.04249999999999993366 ) ) ;

#225 = CLOSED_SHELL ( 'NONE', ( #1140, #806, #28, #153, #2522, #1654, #303, #489, #45, #556, #1486, #722, #1821, #173, #1274, #2079, #752, #1548, #242, #954, #1369, #1903, #341, #1222, #508, #625, #2580, #440, #1003, #892, #1308, #1201, #2565, #392, #1786 ) ) ;

#226 = EDGE_CURVE ( 'NONE', #1873, #2040, #438, .T. ) ;

#227 = VERTEX_POINT ( 'NONE', #1170 ) ;

#228 = CARTESIAN_POINT ( 'NONE', ( 8.002628872696334383, 0.7620602808668278660, 0.04249999999999994754 ) ) ;

#229 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );

#230 = ORIENTED_EDGE ( 'NONE', *, *, #588, .T. ) ;

#231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#232 = CARTESIAN_POINT ( 'NONE', ( 7.908950524468113308, 1.043279419235261241, 0.04249999999999994754 ) ) ;

#233 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 8.219997817233913651, 0.004278644424794418241 ) ) ;

#234 = AXIS2_PLACEMENT_3D ( 'NONE', #1316, #94, #2528 ) ;

#235 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#236 = CARTESIAN_POINT ( 'NONE', ( 8.044394037159580790, 0.6464191572605980651, 0.04249999999999996836 ) ) ;

#237 = CARTESIAN_POINT ( 'NONE', ( 8.042150951268007830, 1.019750763944148986, 0.04249999999999996836 ) ) ;

#238 = VERTEX_POINT ( 'NONE', #1616 ) ;

#239 = EDGE_CURVE ( 'NONE', #103, #238, #1633, .T. ) ;

#240 = CARTESIAN_POINT ( 'NONE', ( 7.980291778108776768, 0.6116995030670492328, 0.04249999999999994754 ) ) ;

#241 = ORIENTED_EDGE ( 'NONE', *, *, #7, .F. ) ;

#242 = ADVANCED_FACE ( 'NONE', ( #2270, #2285 ), #55, .T. ) ;

#243 = CARTESIAN_POINT ( 'NONE', ( 7.950222603449367931, 0.4501753242646479025, 0.04249999999999995448 ) ) ;

#244 = CARTESIAN_POINT ( 'NONE', ( 7.918872435545695865, 1.051989044282113817, 0.04249999999999995448 ) ) ;

#245 = FACE_OUTER_BOUND ( 'NONE', #2687, .T. ) ;

#246 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#247 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #2492, #1629, #2594, #1441, #830, #1158, #2271, #750, #314, #2062, #1580, #2410, #2664, #1146, #2046, #1174, #329, #1836, #547 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.07434154162584671877, 0.1450698374877482655, 0.2138227648066982622, 0.2799855667758265332, 0.3452793148406146928, 0.4090026270639400829, 0.4727997175431335464, 0.5367861329177476826, 0.5994325785631287040, 0.6601008166558111068, 0.7181394536662242256, 0.7745695061902824197, 0.8303196356943935985, 0.8862953229484237250, 0.9425315238088207703, 0.9999999999999998890 ), .UNSPECIFIED. ) ;

#248 = CARTESIAN_POINT ( 'NONE', ( 8.069717605390188453, 0.7301494391175973320, 0.04249999999999995448 ) ) ;

#249 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #718, #922, #79, #2350, #1152, #1545, #910, #1317, #2142, #2338, #1739 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.1203299618916305880, 0.2400967697452810468, 0.3606690069732577664, 0.4832891908749312737, 0.6077342651397279472, 0.7340394804997512068, 0.8639776341543884408, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#250 = LINE ( 'NONE', #2306, #666 ) ;

#251 = CARTESIAN_POINT ( 'NONE', ( -1.784995308451460261, 3.547430567477301899, 0.04249999999999995448 ) ) ;

#252 = ORIENTED_EDGE ( 'NONE', *, *, #2613, .F. ) ;

#253 = CARTESIAN_POINT ( 'NONE', ( 7.998199457549034719, 0.6541096658881082604, 0.04249999999999995448 ) ) ;

#254 = ORIENTED_EDGE ( 'NONE', *, *, #2367, .F. ) ;

#255 = PLANE ( 'NONE', #234 ) ;

#256 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 0.03249999999999999417 ) ) ;

#257 = LINE ( 'NONE', #2105, #61 ) ;

#258 = EDGE_CURVE ( 'NONE', #1217, #1235, #925, .T. ) ;

#259 = AXIS2_PLACEMENT_3D ( 'NONE', #1390, #2037, #959 ) ;

#260 = CARTESIAN_POINT ( 'NONE', ( 0.4478776634924080957, -0.1025596100420110984, 0.04249999999999995448 ) ) ;

#261 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 7.887000000000000455, 0.04249999999999995448 ) ) ;

#262 = CARTESIAN_POINT ( 'NONE', ( 8.025845242839244165, 1.079114529742736250, 0.04249999999999997530 ) ) ;

#263 = CARTESIAN_POINT ( 'NONE', ( 7.957366970849470533, 0.07495219440381011011, 0.04249999999999995448 ) ) ;

#264 = ORIENTED_EDGE ( 'NONE', *, *, #939, .T. ) ;

#265 = CARTESIAN_POINT ( 'NONE', ( 7.971519817116085704, 0.3191997150255008742, 0.04249999999999995448 ) ) ;

#266 = ORIENTED_EDGE ( 'NONE', *, *, #2231, .F. ) ;

#267 = ORIENTED_EDGE ( 'NONE', *, *, #1292, .F. ) ;

#268 = CARTESIAN_POINT ( 'NONE', ( 8.001946860848986987, 0.5661721318386918611, 0.04249999999999995448 ) ) ;

#269 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#270 = CARTESIAN_POINT ( 'NONE', ( 8.015713485562352858, 0.6385190472298933884, 0.04249999999999994060 ) ) ;

#271 = EDGE_CURVE ( 'NONE', #2640, #1461, #1863, .T. ) ;

#272 =( CONVERSION_BASED_UNIT ( 'INCH', #926 ) LENGTH_UNIT ( ) NAMED_UNIT ( #2168 ) );

#273 = TOROIDAL_SURFACE ( 'NONE', #1576, 8.187500000000044409, 0.04250000000000002387 ) ;

#274 = VECTOR ( 'NONE', #937, 39.37007874015748854 ) ;

#275 = CARTESIAN_POINT ( 'NONE', ( 7.954260653403849801, 0.6353939699312681766, 0.04249999999999996836 ) ) ;

#276 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 8.228900277742441816, 0.01110110597049912724 ) ) ;

#277 = ORIENTED_EDGE ( 'NONE', *, *, #2367, .T. ) ;

#278 = CARTESIAN_POINT ( 'NONE', ( 7.938352592642255345, 1.088116410807811407, 0.04249999999999994060 ) ) ;

#279 = VERTEX_POINT ( 'NONE', #1453 ) ;

#280 = ORIENTED_EDGE ( 'NONE', *, *, #208, .T. ) ;

#281 = LINE ( 'NONE', #1738, #710 ) ;

#282 = LINE ( 'NONE', #308, #1513 ) ;

#283 = DIRECTION ( 'NONE', ( 0.9984366694599047243, -0.05589469632990982928, 0.000000000000000000 ) ) ;

#284 = CARTESIAN_POINT ( 'NONE', ( 0.4398059451592633007, 0.04142942990086237454, 0.04249999999999995448 ) ) ;

#285 = EDGE_CURVE ( 'NONE', #227, #2175, #2503, .T. ) ;

#286 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#287 = CARTESIAN_POINT ( 'NONE', ( 8.204918170043212555, -0.03099999999999999978, -8.208642922136945685 ) ) ;

#288 = ORIENTED_EDGE ( 'NONE', *, *, #888, .F. ) ;

#289 = EDGE_CURVE ( 'NONE', #962, #63, #427, .T. ) ;

#290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #2152, #67, #268, #1927, #2577, #1128, #1938, #667, #2555, #717, #2323, #295, #512, #695, #2102 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.09353899373177043675, 0.1812731775870676243, 0.2638352851521537090, 0.3413457517730069668, 0.4133831842357794661, 0.4807428376763734912, 0.5433835730684644094, 0.6018583587398250723, 0.7103319788818486247, 0.8112274085817314795, 0.9073232010973408812, 0.9999999999999998890 ), .UNSPECIFIED. ) ;

#291 = CARTESIAN_POINT ( 'NONE', ( 7.992407928140605300, 0.2923269915077583159, 0.04249999999999995448 ) ) ;

#292 = ORIENTED_EDGE ( 'NONE', *, *, #1802, .T. ) ;

#293 = ORIENTED_EDGE ( 'NONE', *, *, #2026, .F. ) ;

#294 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ;

#295 = CARTESIAN_POINT ( 'NONE', ( 7.951359093366889397, 0.5759309767346670883, 0.04249999999999996836 ) ) ;

#296 = PLANE ( 'NONE', #163 ) ;

#297 = CARTESIAN_POINT ( 'NONE', ( 8.085675625960073276, 0.6142287989706539664, 0.04249999999999996836 ) ) ;

#298 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );

#299 = VECTOR ( 'NONE', #2670, 39.37007874015748143 ) ;

#300 = CARTESIAN_POINT ( 'NONE', ( -0.4395621520582452257, 0.03518220799934474591, 0.04249999999999995448 ) ) ;

#301 = CARTESIAN_POINT ( 'NONE', ( 7.985537827314704629, -0.3461997263420323323, 0.04249999999999994754 ) ) ;

#302 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .T. ) ;

#303 = ADVANCED_FACE ( 'NONE', ( #450 ), #683, .F. ) ;

#304 = CARTESIAN_POINT ( 'NONE', ( 8.014596874556970008, 0.9527105350523781269, 0.04249999999999996836 ) ) ;

#305 = ORIENTED_EDGE ( 'NONE', *, *, #2449, .F. ) ;

#306 = ORIENTED_EDGE ( 'NONE', *, *, #888, .T. ) ;

#307 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#308 = CARTESIAN_POINT ( 'NONE', ( 8.006567001457691291, 8.005217767806787066, 0.04249999999999995448 ) ) ;

#309 = CARTESIAN_POINT ( 'NONE', ( 7.933231391372669528, 0.6047511578815875088, 0.04249999999999994754 ) ) ;

#310 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999998751, 8.219999398312268113, -0.004235101529027372053 ) ) ;

#311 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ;

#313 = CIRCLE ( 'NONE', #532, 8.187500000000044409 ) ;

#312 = CARTESIAN_POINT ( 'NONE', ( 7.958130131573510013, 0.6366568475600167254, 0.04249999999999996836 ) ) ;

#314 = CARTESIAN_POINT ( 'NONE', ( 7.941186495470790696, 0.7130274051761692489, 0.04249999999999996836 ) ) ;

#315 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .F. ) ;

#316 = CIRCLE ( 'NONE', #1100, 7.887000000000000455 ) ;

#317 = CARTESIAN_POINT ( 'NONE', ( 7.926295155940419335, 1.083905752817911239, 0.04249999999999994754 ) ) ;

#318 = VERTEX_POINT ( 'NONE', #655 ) ;

#319 = VERTEX_POINT ( 'NONE', #421 ) ;

#320 = EDGE_CURVE ( 'NONE', #2109, #384, #1801, .T. ) ;

#321 = CARTESIAN_POINT ( 'NONE', ( 7.931301048468551329, -0.3205461806689561821, 0.04249999999999995448 ) ) ;

#322 = FACE_OUTER_BOUND ( 'NONE', #1186, .T. ) ;

#323 = CARTESIAN_POINT ( 'NONE', ( 7.939198358547993273, 0.6247326500927480319, 0.04249999999999995448 ) ) ;

#324 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #369, 'distance_accuracy_value', 'NONE');

#325 = PRODUCT ( 'MAT-A-1169-O', 'MAT-A-1169-O', '', ( #2678 ) ) ;

#326 = EDGE_CURVE ( 'NONE', #431, #481, #475, .T. ) ;

#327 = CARTESIAN_POINT ( 'NONE', ( 8.027232926680131442, 0.7444001251184323431, 0.04249999999999994754 ) ) ;

#328 = CARTESIAN_POINT ( 'NONE', ( 8.006687554083978142, 0.7480058943492017276, 0.04249999999999994754 ) ) ;

#329 = CARTESIAN_POINT ( 'NONE', ( 7.923378840861457384, 0.7367142235627216484, 0.04249999999999995448 ) ) ;

#330 = ORIENTED_EDGE ( 'NONE', *, *, #540, .F. ) ;

#331 = CARTESIAN_POINT ( 'NONE', ( 7.669412331396878280, 8.316588170127536372, 0.04249999999999995448 ) ) ;

#332 = CARTESIAN_POINT ( 'NONE', ( 8.055513322060784631, -0.5356082691730658096, 0.04249999999999997530 ) ) ;

#333 = ORIENTED_EDGE ( 'NONE', *, *, #1365, .T. ) ;

#334 = VERTEX_POINT ( 'NONE', #2375 ) ;

#335 = DIRECTION ( 'NONE', ( 0.9258437272897462877, -0.3779065924778635122, 0.000000000000000000 ) ) ;

#336 = CARTESIAN_POINT ( 'NONE', ( 8.025261594182072855, 0.7228757834218960676, 0.04249999999999994754 ) ) ;

#337 = CARTESIAN_POINT ( 'NONE', ( 7.933866491478729799, 0.6133299404104268771, 0.04249999999999994060 ) ) ;

#338 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #2188 ) ) ;

#339 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.000000000000000000, 0.000000000000000000 ) ) ;

#340 = CARTESIAN_POINT ( 'NONE', ( 8.036361387853066418, 0.9396084960020926191, 0.04249999999999995448 ) ) ;

#341 = ADVANCED_FACE ( 'NONE', ( #948 ), #296, .T. ) ;

#342 = AXIS2_PLACEMENT_3D ( 'NONE', #482, #64, #691 ) ;

#343 = CARTESIAN_POINT ( 'NONE', ( 8.204918170043212555, 0.03099999999999999978, -8.208642922136945685 ) ) ;

#344 = LINE ( 'NONE', #1372, #734 ) ;

#345 = VERTEX_POINT ( 'NONE', #1928 ) ;

#346 = TOROIDAL_SURFACE ( 'NONE', #824, 8.187500000000044409, 0.03249999999999999417 ) ;

#347 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#348 = DIRECTION ( 'NONE', ( -0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;

#349 = ORIENTED_EDGE ( 'NONE', *, *, #1320, .F. ) ;

#350 = EDGE_LOOP ( 'NONE', ( #306, #705, #1448, #1303, #2069, #264, #854, #867 ) ) ;

#351 = CYLINDRICAL_SURFACE ( 'NONE', #818, 7.887000000000000455 ) ;

#352 = CARTESIAN_POINT ( 'NONE', ( 8.063614792878473381, 0.7979286143757491345, 0.04249999999999996836 ) ) ;

#353 = CARTESIAN_POINT ( 'NONE', ( 8.001022743526407410, 0.6055227116798977960, 0.04249999999999995448 ) ) ;

#354 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #575, #1401, #370, #2450, #2623, #1199, #599, #1212, #994, #586, #1826 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.09938270308513030837, 0.2069067643181837779, 0.3208410624032784764, 0.4420790063136711412, 0.5706349452930299382, 0.7061987458499376924, 0.8494249207365378584, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#355 = CARTESIAN_POINT ( 'NONE', ( 7.994966411177117926, 0.4210195961077771720, 0.04249999999999997530 ) ) ;

#356 = PRESENTATION_STYLE_ASSIGNMENT (( #2422 ) ) ;

#357 = EDGE_CURVE ( 'NONE', #2292, #1555, #732, .T. ) ;

#358 = CARTESIAN_POINT ( 'NONE', ( 7.923433245085734100, 0.7508875614531397291, 0.04249999999999994754 ) ) ;

#359 = ORIENTED_EDGE ( 'NONE', *, *, #588, .F. ) ;

#360 = DIRECTION ( 'NONE', ( -0.05592551578878021679, 0.9984349436411763534, 0.000000000000000000 ) ) ;

#361 = CARTESIAN_POINT ( 'NONE', ( 8.103299136922851531, 0.6241192908197800149, 0.04249999999999995448 ) ) ;

#362 = VERTEX_POINT ( 'NONE', #2153 ) ;

#363 = COLOUR_RGB ( '',0.7764705882352941346, 0.7568627450980391913, 0.7372549019607843590 ) ;

#364 = VERTEX_POINT ( 'NONE', #486 ) ;

#365 = DIRECTION ( 'NONE', ( -0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;

#366 = DIRECTION ( 'NONE', ( -0.01582535609111580116, 0.9998747712111698549, 0.000000000000000000 ) ) ;

#367 = CARTESIAN_POINT ( 'NONE', ( 7.958337401376670783, 0.5493148841643470393, 0.04249999999999997530 ) ) ;

#368 = FACE_BOUND ( 'NONE', #35, .T. ) ;

#369 =( CONVERSION_BASED_UNIT ( 'INCH', #381 ) LENGTH_UNIT ( ) NAMED_UNIT ( #2378 ) );

#370 = CARTESIAN_POINT ( 'NONE', ( 7.961344137741562577, 0.07617784830865423351, 0.04249999999999996836 ) ) ;

#371 = EDGE_LOOP ( 'NONE', ( #1081, #1200, #1999, #566 ) ) ;

#372 = CARTESIAN_POINT ( 'NONE', ( 3.409921637726783139, -1.916524708464576898, 0.04249999999999995448 ) ) ;

#373 = CARTESIAN_POINT ( 'NONE', ( 8.104380553844690027, 0.6160316835860387696, 0.04249999999999997530 ) ) ;

#374 = EDGE_CURVE ( 'NONE', #1542, #945, #2556, .T. ) ;

#375 = VERTEX_POINT ( 'NONE', #68 ) ;

#376 = VERTEX_POINT ( 'NONE', #935 ) ;

#377 = CARTESIAN_POINT ( 'NONE', ( 8.027355676720123512, 0.7333430737033459490, 0.04249999999999994060 ) ) ;

#378 = CARTESIAN_POINT ( 'NONE', ( 8.059164259889536552, 0.8002070186274056196, 0.04249999999999997530 ) ) ;

#379 = CARTESIAN_POINT ( 'NONE', ( 8.004710472006564714, 0.5926797343887727498, 0.04249999999999996836 ) ) ;

#380 = CARTESIAN_POINT ( 'NONE', ( 7.982121671898624982, 0.9162459858647302724, 0.04249999999999996836 ) ) ;

#381 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999897 ), #2187 );

#382 = CARTESIAN_POINT ( 'NONE', ( 7.972211347070526699, 0.7075041318816998048, 0.04249999999999994754 ) ) ;

#383 = VECTOR ( 'NONE', #204, 39.37007874015748854 ) ;

#384 = VERTEX_POINT ( 'NONE', #1762 ) ;

#385 = CARTESIAN_POINT ( 'NONE', ( 8.049768878980630760, 0.5735205723702468950, 0.04249999999999994060 ) ) ;

#386 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 8.187499618320646988, 0.04249999999999995448 ) ) ;

#387 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 8.213633417351207555, 0.03397012188413464640 ) ) ;

#388 = VECTOR ( 'NONE', #154, 39.37007874015748143 ) ;

#389 = ORIENTED_EDGE ( 'NONE', *, *, #60, .T. ) ;

#390 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .F. ) ;

#391 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #1293, #1521, #1073, #2349, #2141, #909, #2567, #706, #1494, #461, #1914 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.1347036286678316985, 0.2637134463377736049, 0.3880601190725823102, 0.5095063019477010791, 0.6302927848904886776, 0.7508004190199603078, 0.8736580960216674407, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#392 = ADVANCED_FACE ( 'NONE', ( #1778 ), #897, .F. ) ;

#393 = CARTESIAN_POINT ( 'NONE', ( 7.978394893906902929, 0.9158467148461925111, 0.04249999999999996836 ) ) ;

#394 = CARTESIAN_POINT ( 'NONE', ( 7.940881455286997515, 0.5849694840668078211, 0.04249999999999994754 ) ) ;

#395 = CARTESIAN_POINT ( 'NONE', ( 7.904144222600453240, 0.7446569634019295503, 0.04249999999999994060 ) ) ;

#396 = CARTESIAN_POINT ( 'NONE', ( 8.054576392144738861, 0.9624127464427424394, 0.04249999999999995448 ) ) ;

#397 = CARTESIAN_POINT ( 'NONE', ( 8.383338876859683708, 7.605679903460987212, 0.04249999999999995448 ) ) ;

#398 = CARTESIAN_POINT ( 'NONE', ( 7.989771347876167162, 0.7133189813875655538, 0.04249999999999994754 ) ) ;

#399 = ORIENTED_EDGE ( 'NONE', *, *, #905, .T. ) ;

#400 = CARTESIAN_POINT ( 'NONE', ( 7.483023935172171015, 8.308039709907486525, 0.04249999999999995448 ) ) ;

#401 = CARTESIAN_POINT ( 'NONE', ( 8.070120317315934599, 0.7641110181061715467, 0.04249999999999996836 ) ) ;

#402 = CARTESIAN_POINT ( 'NONE', ( -0.002500000000000000052, 8.198619816068585919, -0.04139480813592658764 ) ) ;

#403 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ;

#404 = VERTEX_POINT ( 'NONE', #1522 ) ;

#405 = CARTESIAN_POINT ( 'NONE', ( 8.036396779806228352, 0.6693294600283464790, 0.04249999999999997530 ) ) ;

#406 = VECTOR ( 'NONE', #817, 39.37007874015748143 ) ;

#407 = CARTESIAN_POINT ( 'NONE', ( 8.081466730714385704, 0.7113604256743228937, 0.04249999999999996836 ) ) ;

#408 = CARTESIAN_POINT ( 'NONE', ( 7.951592415299395533, 0.8013003817029810127, 0.04249999999999994754 ) ) ;

#409 = CARTESIAN_POINT ( 'NONE', ( 7.935530663765501203, 1.060805296949162813, 0.04249999999999996836 ) ) ;

#410 = DIRECTION ( 'NONE', ( 0.05575072035811225180, 0.9984447191404998145, -0.000000000000000000 ) ) ;

#411 = EDGE_CURVE ( 'NONE', #2469, #1623, #249, .T. ) ;

#412 = CARTESIAN_POINT ( 'NONE', ( -0.002499999999999999618, 7.886999603778360068, 0.000000000000000000 ) ) ;

#413 = CARTESIAN_POINT ( 'NONE', ( 8.095480673910257607, 0.5781284380924998079, 0.04249999999999995448 ) ) ;

#414 = CARTESIAN_POINT ( 'NONE', ( 8.047042539457260446, 1.059171027012554722, 0.04249999999999997530 ) ) ;

#415 = CARTESIAN_POINT ( 'NONE', ( -0.002500000000000000052, 8.228880722083665944, 0.01115901430314322935 ) ) ;

#416 = ORIENTED_EDGE ( 'NONE', *, *, #603, .T. ) ;

#417 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ;

#418 = CARTESIAN_POINT ( 'NONE', ( 7.970963440464499783, 0.7801776112734744029, 0.04249999999999994754 ) ) ;

#419 =( CONVERSION_BASED_UNIT ( 'INCH', #2084 ) LENGTH_UNIT ( ) NAMED_UNIT ( #1926 ) );

#420 = CARTESIAN_POINT ( 'NONE', ( 7.921326680713391966, 0.7838985671885949635, 0.04249999999999994754 ) ) ;

#421 = CARTESIAN_POINT ( 'NONE', ( 7.989368957122397141, -0.3231002672074169690, 0.04249999999999995448 ) ) ;

#422 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 7.887000000000000455, 0.04249999999999995448 ) ) ;

#423 = EDGE_CURVE ( 'NONE', #1493, #2370, #282, .T. ) ;

#424 = FACE_BOUND ( 'NONE', #1584, .T. ) ;

#425 = CARTESIAN_POINT ( 'NONE', ( 7.923063212340383465, -0.4661695603022379952, 0.04249999999999995448 ) ) ;

#426 = CARTESIAN_POINT ( 'NONE', ( 8.039589387979305002, 0.6461173206052693851, 0.04249999999999994754 ) ) ;

#427 = CIRCLE ( 'NONE', #1079, 8.187500000000044409 ) ;

#428 = CARTESIAN_POINT ( 'NONE', ( 7.995715829022548071, 0.08873674969227163256, 0.04249999999999995448 ) ) ;

#429 = ORIENTED_EDGE ( 'NONE', *, *, #326, .F. ) ;

#430 = CARTESIAN_POINT ( 'NONE', ( 8.034239184722027360, 0.6691115888920124988, 0.04249999999999995448 ) ) ;

#431 = VERTEX_POINT ( 'NONE', #1750 ) ;

#432 = AXIS2_PLACEMENT_3D ( 'NONE', #1620, #984, #1176 ) ;

#433 = CARTESIAN_POINT ( 'NONE', ( 7.984563125311020748, 0.8074268533538340176, 0.04249999999999994754 ) ) ;

#434 = CARTESIAN_POINT ( 'NONE', ( 7.957366970849470533, 0.07495219440381011011, 0.04249999999999995448 ) ) ;

#435 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #2336 ) ;

#436 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000919, 8.207462906613661957, -0.02599718081440589856 ) ) ;

#437 = FACE_BOUND ( 'NONE', #1126, .T. ) ;

#438 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #774, #355, #2647, #1604, #788, #2227, #2240, #2622, #1183, #967, #1835 ), .UNSPECIFIED., .F., .F., ( 4, 1, 1, 1, 1, 1, 1, 1, 4 ), ( 0.000000000000000000, 0.1105669915238658430, 0.2308308496685377298, 0.3605128569581622644, 0.5003478332388311411, 0.6401898207244151040, 0.7694534459595314679, 0.8895949562226654894, 1.000000000000000000 ), .UNSPECIFIED. ) ;

#439 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#440 = ADVANCED_FACE ( 'NONE', ( #322 ), #1553, .T. ) ;

#441 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 7.886999603778360068, 0.03249999999999985539 ) ) ;

#442 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000486, 8.187500000000044409, -0.03249999999999999417 ) ) ;

#443 = AXIS2_PLACEMENT_3D ( 'NONE', #2065, #207, #832 ) ;

#444 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ;

#445 = EDGE_CURVE ( 'NONE', #1816, #1713, #735, .T. ) ;

#446 = CARTESIAN_POINT ( 'NONE', ( 8.031380886604045699, 7.813091586933008870, 0.04249999999999995448 ) ) ;

#447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,

( #1500, #1310, #2133, #494, #505, #2382, #1731, #276, #2329, #1322, #1095, #1080, #467, #2355, #2147, #724, #1708, #929 ), .UNSPECIFIED., .F., .F., ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), ( 0.002063523058262514871, 0.002485395863463786201, 0.002907268668665057097, 0.003329141473866328426, 0.003751014279067599322, 0.004172887084268870651, 0.004594759889470141113, 0.005016632694671412443, 0.005438505499872682905 ), .UNSPECIFIED. ) ;

#448 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .F. ) ;

#449 = CARTESIAN_POINT ( 'NONE', ( 7.904076835246980792, 0.7402622637517307647, 0.04249999999999994754 ) ) ;

#450 = FACE_OUTER_BOUND ( 'NONE', #784, .T. ) ;

#451 =( CONVERSION_BASED_UNIT ( 'INCH', #1797 ) LENGTH_UNIT ( ) NAMED_UNIT ( #2131 ) );

#452 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;

#453 = SURFACE_STYLE_USAGE ( .BOTH. , #44 ) ;

#454 = CARTESIAN_POINT ( 'NONE', ( 8.073643086881673980, 0.7389632176897937832, 0.04249999999999996836 ) ) ;

#455 = CARTESIAN_POINT ( 'NONE', ( 7.991267620007513450, 1.091759407472525423, 0.04249999999999997530 ) ) ;

#456 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;

#457 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .T. ) ;

#458 = EDGE_CURVE ( 'NONE', #1859, #362, #2379, .T. ) ;

#459 = CARTESIAN_POINT ( 'NONE', ( -7.887000000000000455, 0.000000000000000000, 0.04249999999999988509 ) ) ;

#460 = EDGE_LOOP ( 'NONE', ( #1376, #2218, #1785, #1364, #2015, #1407, #2035 ) ) ;

#461 = CARTESIAN_POINT ( 'NONE', ( 7.937528814602622163, 0.5597871232771294281, 0.04249999999999994754 ) ) ;

#462 = CARTESIAN_POINT ( 'NONE', ( 7.984188295114765133, 0.06843929368016220260, 0.04249999999999994060 ) ) ;

#463 = CARTESIAN_POINT ( 'NONE', ( 8.190347710871010989, 7.619797166879198613, 0.04249999999999995448 ) ) ;

#464 = FILL_AREA_STYLE ('',( #1893 ) ) ;

#465 = CARTESIAN_POINT ( 'NONE', ( 8.019231815863919977, 0.5445923807014231288, 0.04249999999999996836 ) ) ;

#466 = CARTESIAN_POINT ( 'NONE', ( -8.187500000000044409, 0.000000000000000000, -0.03249999999999999417 ) ) ;

#467 = CARTESIAN_POINT ( 'NONE', ( 0.002500000000000000919, 8.221478541958429531, -0.02612359820354468593 ) ) ;

#468 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .F. ) ;

#469 = CARTESIAN_POINT ( 'NONE', ( 7.982042232683697947, 0.9417920251386776576, 0.04249999999999996836 ) ) ;

#470 = EDGE_LOOP ( 'NONE', ( #826, #1594, #2194, #1972, #987, #2234, #2386, #2191 ) ) ;

#471 = VECTOR ( 'NONE', #2100, 39.37007874015748854 ) ;

#472 = ORIENTED_EDGE ( 'NONE', *, *, #905, .F. ) ;

#473 = EDGE_CURVE ( 'NONE', #894, #811, #1423, .T. ) ;

#474 = CARTESIAN_POINT ( 'NONE', ( 8.003613951921201064, 0.8273714645424882219, 0.04249999999999995448 ) ) ;

#475 = LINE ( 'NONE', #1116, #1990 ) ;

#476 = CARTESIAN_POINT ( 'NONE', ( 8.017698987978892688, 0.8996746496386406333, 0.04249999999999995448 ) ) ;

#477 = VECTOR ( 'NONE', #598, 39.37007874015748143 ) ;

#478 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );

#479 = CARTESIAN_POINT ( 'NONE', ( 8.122293353061010635, 0.1673875910384240440, 0.04249999999999995448 ) ) ;

#480 = CARTESIAN_POINT ( 'NONE', ( 7.963111410952447677, -0.3315337109608786914, 0.04249999999999995448 ) ) ;

#481 = VERTEX_POINT ( 'NONE', #185 ) ;

#482 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 7.887000000000000455, 0.04249999999999995448 ) ) ;

#483 = ORIENTED_EDGE ( 'NONE', *, *, #1469, .F. ) ;

#484 = VERTEX_POINT ( 'NONE', #1421 ) ;

#485 = CARTESIAN_POINT ( 'NONE', ( 7.926205038263923086, 0.4681362332837408213, 0.04249999999999994754 ) ) ;

#486 = CARTESIAN_POINT ( 'NONE', ( 7.953900051282692729, -0.4584697405906992818, 0.04249999999999995448 ) ) ;

#487 = CARTESIAN_POINT ( 'NONE', ( 8.088232991601337574, 0.7702639758377956003, 0.04249999999999996836 ) ) ;

#488 = CARTESIAN_POINT ( 'NONE', ( -0.002500000000000000052, 8.196030630387914684, -0.03250000000000011907 ) ) ;

#489 = ADVANCED_FACE ( 'NONE', ( #1194 ), #351, .F. ) ;

#490 = VECTOR ( 'NONE',…