Attachment 2 Cafe Remodel Salient Characteristics.pdf

Salient Characteristics

Community Center Café and Full-Service Bar

319 Force Support Squadron

18 Apr 2024

1. General:

319 Force Support Squadron is adding a Cafe and full-service bar to the Grand Forks AFB Community Center to increase food/beverage/bar options and availability for the Grand Forks AFB community.

The contractor shall deliver & install the below items.

2. Parts and Materials

*An item of equal characteristics to the model numbers below may be quoted. Acceptability or non-acceptability of an “or equal” model/part number will be determined by the requirement owner in the 319th Force Support Squadron. *

Line # Description Quantality

1 Display case, non-refrigerated/refrigerated combo (Café Item C1) Federal Industries Model No. CD4828SS/RSS4SC Specialty Display Hybrid Merchandiser Refrigerated Self-Serve Bottom With Non-Refrigerated Self-Serve Top, 48"W x 39"D x 69.75”H,refrigerated self-serve bottom: black laminated exterior with black trim, horizontal 3500K LED top & front light, (2) tiers of black metal shelves with black interior, tempered glass ends, Non-Refrigerated Self- Serve Top: (3) hinged lift-up front doors, black trim, (2) tier black wire shelves, sliding rear doors, 1/2 HP, cULus, UL EPH Classified, Made In USA, DOE 2017 compliant 1 ea One year parts & labor warranty, standard 1 ea 120v/60/1-ph, 1.5 amps (top display) 1 ea 120v/60/1-ph, 1/2 hp, 16.0 amps (bottom display) 1 ea Laminate special color (Formica/Wilsonart) standard offerings - Note:

other source contact factory

2 Coffee Counter (Café Item C2) Savannah Model No. COFFEE COUNTER MILLWORK COFFEE COUNTER - To measure per site dimensions - 3cm Caesar stone quartz top. Counter to accommodate Buyout Equipment.

Cabinet base to be constructed of 3/4" plywood covered with a standard grade laminate. Counter to have laminated millwork interior shelving and hinged doors as required. Counter to sit on 6" stainless steel legs with adjustable feet and have removable toe kick as required. Counter to have convenience outlets as required. Counter to be pre-wired to a j-box with final electrical connection included in Main Installation.

CAPPUCCINO COUNTER Millwork Espresso / Cappuccino Counter - To Measure per site dimensions - 3cm Caesar stone quartz top. Counter to accommodate buyout equipment Cabinet base to be constructed of 3/4" plywood covered with a standard grade laminate. Counter to have laminated millwork interior shelving. Counter to be recessed to accommodate under counter equipment. Counter to have a laminated millwork threesided raised serving ledge with Caesar stone quartz top cap. Counter to sit on 6" legs with adjustable feet and have toe kick as required. Counter to have convenience outlets as required. Counter to be prewired to a j-box with final electrical connection included in Main Installation.

3 Refrigerator, undercounter (Café Item C5) Hishizaki Model No. UR48B Steelheart Series Undercounter Refrigerator, reach-in, two-section, 48"W,

13.66 cu. ft., self-contained rear mounted refrigeration system, (2) reversible solid hinged doors, (2) adjustable shelves, stainless steel interior, stainless steel exterior front, sides & top, (4) 4" stem casters (2 with brakes), R290 hydrocarbon refrigerant, 1/6 HP, cord, NEMA 5-15P, cETLus, ETL-Sanitation, ENERGY STAR® -Warranty: 3-Year parts & labor on entire machine -Warranty: 5-Year parts on compressor -115v/60/1-ph, 2.6 amps, standard -115v/60/1-ph, 3 amps, standard

4 Condiment Counter (Café Item C6) Savannah Model No. CONDIMENT COUNTER Millwork Condiment Counter - To Measure per site dimensions - 3cm Caesar stone quartz top with a 4" splash. Cabinet base to be constructed on 3/4" plywood covered with a standard grade laminate. Counter to sit on 6" legs with adjustable feet and have toe kick as required.

5 Undercounter Refrigerator (Café Item C9) Hoshizaki Model No. UR36B Steelheart Series Undercounter Refrigerator, reach-in, one-section, 36"W,

9.9 cu. ft., self-contained rear mounted refrigeration system, (1) solid hinged door, (1) adjustable shelf, stainless steel interior, stainless steel exterior front, sides & top, (4) 4" stem casters (2 with brakes), R290 Hydrocarbon refrigerant, 1/6 HP, NEMA 5-15P, ETLSanitation, cETLus, ENERGY STAR®

1 ea Warranty: 3-Year parts & labor on entire machine 1 ea Warranty: 5-Year parts on compressor 1 ea 115v/60/1-ph, 2.4 amps, standard

6 Back Coffee Counter (Café Item C10) Savannah Model No. COFFEE COUNTER

Millwork Coffee Back Counter - To measure per site dimensions - 3cm Caesar stone quartz top with a 4" splash. Counter to accommodate faucets, Drop-in sinks, and buyout equipment Cabinet base to be constructed of 3/4" plywood covered with a standard grade laminate.

Counter to have laminated millwork interior shelving and hinged doors as required. Counter to sit on 6" legs with adjustable feet and have toe kick required. Counter to have convenience outlets as required. Counter to be pre-wired to a j-box with final electrical connection included in Main Installation.

7 Drop-In Sink (Café Item C10.1) Advance Tabco Model No. DI-2-1410 Drop-In Sink, 2-compartment, 14" wide x 16" front-to-back x 10" deep each/bowl, 18 gauge 304 stainless steel, deck mounted 8" swing spout faucet, basket drain

Coffee Brewer (Café Item C11) BUNN Model No. 20900.0011

20900.0011 Dual® Coffee Brewer, Portable, mechanical thermostat, brews

18.9 gallons per hour capacity, stainless steel funnel, 3 batchsize settings, electronic timer & grinder interface, upper hot water faucet, variable water bypass, includes (2) GPR servers (20950.0004), 4" black adjustable legs, 120/240v/60/1-ph, 6890 watts, 29 amps, UL, NSF -2 ea 20950.0004 20950.0004 1.5GPR-FF Coffee Server, 1.5 gallon, top handles, fast flow faucet, stainless decor, NSF

Blender, Bar (Café Item C12) Vitamix Model No. 036019-ABAB The Quiet One® Twist Lock Blender, countertop, 48 oz. (1.4 liter) capacity, clear Tritan™ BPA free Advance® container, 24-1/2"H with lid open, stackable, removable compact twist lock cover, (6) touch control buttons with (34) program options, includes: Advance® blade assembly & lid, 3-peak HP, 120v/50/60/1-ph, 15.0 amps, NEMA 5-15P, RoHs compliant, CE, cULus, NSF -2 ea 3 years warranty on motor base parts & 1 year warranty on labor, standard

10 Bar Equipment (Bar Item 1) Perlick Corporation Model No. BAR EQUIPMENT Bar equipment to include the following:

-1 ea SC24 Underbar Storage Cabinet, drainboard top, 24"W x 24"D, open front, 6"H backsplash with 1" return at top, embossed drainboard with 1-1/2" NPS male drain, adjustable intermediate shelf, stainless steel construction, stainless steel legs & adjustable feet, NSF -1 ea 6" Backsplash standard -1 ea 7055-265A Backsplash cutout for soda lines -1 ea Right side of backsplash

-1 ea TSC12IBW Tobin Ellis Signature Bottle Storage Bin, insulated, 12"W, holds (8) 3-3/4" dia. bottles, 6"H backsplash with 1" return, 1/2" NPS drain, stainless steel construction, stainless steel legs with adjustable thermoplastic feet, NSF -1 ea 6" Backsplash standard -1 ea TSC36IC10 Tobin Ellis Signature Ice Chest, with cold plate, modular, 36"W, approximately 78 lbs. ice capacity, 6"H backsplash with 1" return, ABS plastic top ledge, stainless steel top & sides, stainless steel interior, cold plate concealed under ice chest liner, galvanized steel back & bottom, 1/2" NPS drain, stainless steel legs with adjustable thermoplastic feet, NSF -1 ea 6" Backsplash standard -1 ea Covers MUST be selected to satisfy NSF and/or local code requirements -1 ea ICC-C36 Tobin Ellis Signature Ice Chest Covers, 3-piece sliding assembly, 36"W, front & back, stainless steel (for TSC36 ice chests) -1 ea ICC-TSC Tobin Ellis Signature Ice Bin Divider, stainless steel, for TSC series ice chests -1 ea SRC-CR Tobin Ellis Signature Curved Speed Rail, for right end of TSC series ice chests -1 ea SRC-S24 Tobin Ellis Signature Speed Rail, single, 24"W, stainless steel construction, for use with TSC series ice chests -1 ea TSCE8SSR Tobin Ellis Signature Slanted Liquor Rack, 8"W, holds

(12) 3- 3/4" dia. bottles, vinyl-coated steel wire rack, 6"H backsplash with 1" return, sound-deadened underside, stainless steel construction, stainless steel legs with adjustable thermoplastic feet, NSF (unit requires adjacent support, (1) pair of legs included for placement at end of line-up) -1 ea 6" Backsplash standard -1 ea TSCE18PSTC Tobin Ellis Signature Underbar Utility sink, with glass rinser & tool caddy, 18"W, freestanding, 6"H backsplash with 1" return, 9-1/2" wide x 16-5/16" front-to-back x 7-3/16" deep sink bowl with 1- 1/2" drain, sound-deadened underside, integrated drip pan with 4-3/8" dia. stainless steel glass rinser (NSF) & "water fall" drainage into sink, includes removable perforated glass rack, 4-3/8" x 14-5/16 removable tool caddy well with low-lead dipper faucet (NSF), stainless steel construction, stainless steel legs with adjustable thermoplastic feet -1 ea 6" Backsplash standard -1 ea 67419-GN-LF Gooseneck Spout, splash-mounted, low-lead compliant, for use with foot operated water valve -1 ea A foot pedal is required to operate this faucet, select pedal below -1 ea 67420-2-LF Water Valve, dual pedal, foot operated, 1/2" NPT, low-lead compliant -1 ea TS12BLD TS Series Blender Station, 12"W, flat worktop, recessed blender shelf with duplex outlet, 23-15/16" front to back with 6" splash, stainless steel construction -1 ea 6" Backsplash standard -1 ea 7055-47 Tobin Ellis Signature Wet Waste Basket, stainless steel, for use with underbar utility/dump sink -1 ea GR-IK Water Pressure Regulator Parts Bag, for glass rinsers (1 parts bag required for each glass rinser option picked) -1 ea TS12HSN TS Series Underbar Hand Sink Unit, free standing, 12"W x 22-1/4"D, 6" backsplash, 10" wide x 14" front-to-back x 9-1/4" deep sink, 4" OC splash mount faucet holes, 16 oz. pump soap dispenser, C-fold paper towel dispenser on front apron, sound-deadened underside,

(1) 8-1/2" standpipe, 1-1/2" NPS male drain, stainless steel construction, stainless steel legs with adjustable thermoplastic feet, NSF

-1 ea 934GN-LF Front Loading Faucet, wall/splash mount, lead free, gooseneck spout, faucet valves includes: built-in check valves to prevent back flow or across flow, (2) 3/8" O.D. x 3/8" O.D. x 18", braided stainless steel supply lines included -1 ea 7054R End Splash, right, 6", for TS, TSF, or TSD series -1 ea 7054L End Splash, left, 6", for TS, TSF, or TSD series

11 Cooler, Keg (Bar Item 2) American Panel Corporation Model No. UC-203974 35° F Beer Cooler sized per site dimensions.

Exposed Exterior: 26 ga. stucco acrylume Unexposed Exterior: 26 ga.

stucco acrylume, Interior Walls: 26 ga. stucco acrylume Interior Ceiling:

26 ga. stucco acrylume, Foamed-in-Place 4" Urethane floor panels 1/8'' Diamond Aluminum Treadplate (Intg.)

All panels are NSF 4" foamed-in-place urethane, UL classified with flame spread rating of 20.

1 30" X 67'' flush mount magnetic infitting door with cam-rise hinges, padlockable deadbolt handle (exterior doors only), door closer, brushed hardware, fully programmable Intelligent Controller (IC) featuring audio/visual temperature alarm with digital thermometer, high & low set points, energy saving door frame heater wire, vapor proof light & switch with pilot light.

1 3/4" Plywood Underlayment in Floor Panel 1 Door frame electrical conduit stubbed out roof panel to bell box 1 Upcharge for smooth polished door hardware 1 Flex. Strip Curtain, up to 36" x 77" Opening 1 Door Closer, Kason #1097 Zero roofline refrigeration system 35° F Beer Cooler 208/230/60/1 All-In-One evaporator/condensing unit assembly Includes 5-Year Compressor Warranty Condensing Unit Model #: PT0068MBNAMSA Amp Draw: 9.3A (Each)

12 Remote Beer System (Bar Item 3) 1

Perlick Corporation Model No. CENTURY GLYCOL COOLED SYSTEM Perlick Century Remote Draft Beer Dispensing System, to consist of the following components: (tower style & finish will be verified prior to ordering)

"CENTURY" BEER SYSTEM SERVING (8) BEERS. SYSTEM TO RUN FROM

COOLER DIRECTLY OVER TO TOWER MOUNTED ON COUNTERTOP NEXT

TO THE WALK IN COOLER. SYSTEM DESIGNED USING CO2 TO PUSH THE

BEER.

25 ft 4220-8 First Basic Trunk Housing, for remote beer system, (8) 3/8" I.D. Bev-Seal Barrier product lines (NSF-component), product lines are color-coded & number-coded, 1/2" O.D. copper coolant lines, 3/4" thick thermal insulation, black PVC flame-retardant outer wrap, 3-1/2" diameter O.A., custom fabricated at factory, sold per ft, specify number of feet, each 1 ea C15393 6 yd. Roll - 1/2” filament tape 3 ea C15394 6 yd. roll - 2" clear polytape 4 ea C15699 6 yd. roll - 2" black polytape 1 rl C14230B1 Braided tubing 3/8" - 100 ft. roll 1 ea 4404 Century System Power Pak, air-cooled, 1/3 HP, (1) 100 gph circulating pump, 120v/60/1-ph, 14.4 amps, 1.75 gallon capacity glycol bath, constant pressure expansion valve, adjustable electronic temperature control with digital readout, stainless steel cabinet, 24- 1/4"W x 17-1/4"D x 25-1/2"H, R134a, cULus, NSF 1 ea 5 yr. compressor warranty, 1 yr. parts & labor warranty 1 ea 730 Second year extended parts & labor warranty for refrigeration products (NET) 6 ft 70218 Coolant Connector Kit (per foot), 6' minimum 1 st 57782 Adjustable Legs, 6" to 7-1/4", set of (4) 2 ea RPK4CL Four-way Locking Regulator Panel with 36000G Coupler 1 ea 2930E High Pressure CO2 Drum Regulator 1 ea Without CO2 Detecting Monitor

25ft

1rl

6ft

Back Counter (Bar Item 5) Savannah Model No. BACK BAR & SNACK COUNTER BACK BAR & SNACK COUNTER - To measure per site dimensions - 3cm Caesar stone quartz top with a 4" splash at walls. Countertop to have extra support to accommodate beer and snack equipment. Counter base to be stainless steel tube frame. construction with flooring and shelving as required. Counter to have 3/4" laminated millwork. Panels and hinged doors as required. Laminate to be a standard grade.

Counter to be recessed to accommodate Roll-in Equipment. Counter to sit on 6" high stainless-steel legs with adjustable feet and have toe kick as required. Counter to have convenience outlets as required.

Counter to be pre-wired to a j-box with final electrical connection by others. Counter to include (1) 84" long and (2) 90" long three-tier liquor displays. Liquor displays to have 2cm Caesar stone quartz display shelves with plexi-glass vertical supports. Liquor displays to be backlit with LED lighting

Draft Beer Dispensing Tower (Bar Item 6) 1

Perlick Corporation Model No. 4073-8PO-SS Avenue T-Pipe Draft Beer Tower, countertop, 28"W x 15-5/8"H, glycolcooled, accommodates (8) faucets (faucets sold separately), 3" OC, insulated dispensing heads, includes copper coolant lines & cold block, stainless steel finish, NSF 8 ea 630SS Beer Faucet, sanitary, front, forward-sealing, 304 stainless steel 8 ea 308-40C Beer Faucet Lock (for 630 series faucets)

15 Drip Trough (Bar Item 6.1) Perlick Corporation Model No. C18650A C18000 Series Drip Tray Trough, surface mount, 26-3/4"W x 7-3/4"D, bevel edge, removable louvered glass rack, 1/2" drain, stainless steel construction 15 ft 1390D 1/2" I.D. Vinyl Drain Tube - Anti-Microbial

15ft

16 Back Bar Cabinet, Refrigerated (Bar Item 7) Perlick Corporation Model No. BBS84 Refrigerated Back Bar Cabinet, three-section, 84"W, self-contained refrigeration, 24.8 cu.ft. internal volume, digital thermostat, LED interior lighting, front vented, automatic defrost & condensate evaporator, includes floor drain, stainless steel interior, side mount compressor, 1/4 HP, R290 Hydrocarbon refrigerant, NSF, cULus 1 ea 120v/60/1-ph, 4.2 amps, NEMA 5-15P 1 ea 5 yr. compressor warranty, 1 yr. parts & labor warranty 1 ea 730 Second year extended parts & labor warranty for refrigeration products (NET) 1 ea Standard refrigerator 1 ea Stainless steel top - no tapping holes 1 ea Condensing unit location: Left 1 ea Condensing unit cover finish: Black vinyl coated 1 ea End finish: Stainless steel, unfinished, both sides, standard 1 ea Door type, first: glass with black vinyl/field laminated door frame 1 ea Door hinge location, first: Left 1 ea Door handle, first: full length stainless steel handle, 24" 1 ea Shelving style, first: (3) flat shelves 1 ea Door type, second: glass with black vinyl/field laminated door frame 1 ea Door hinge location, second: Right 1 ea Door handle, second: full length stainless steel handle, 24" 1 ea Shelving style, second: (3) flat shelves 1 ea Door type, third: glass with black vinyl/field laminated door frame 1 ea Door hinge location, third: Right 1 ea Door handle, third: full length stainless steel handle, 24" 1 ea Shelving style, third: (3) flat shelves 1 ea Crisp White™ LED

17 Bar Ledge (Bar Item 8) 1

Savannah Model No. BAR SNACK COUNTER BAR EQUIPMENT WORK LEDGE - To measure PER SITE DIMENSIONS - 14-gauge stainless steel top. Counter base to be stainless steel tube frame construction. Counter to have an open base to accommodate Under-counter Bar Equipment Counter to sit on 6" high stainless-steel legs with adjustable feet. No electrical included in quote.

1 SNACK COUNTER - To measure per site dimensions- 3cm Caesar stone quartz top. Counter to be 18 gauge stainless steel unibody construction with walls, flooring, and shelving as required. Counter to be recessed to accommodate Under counter Equipment. Counter to sit on 6" stainless steel legs with adjustable feet and have removable toe kick as required. No electrical included in quote.

18 Dishwasher, Undercounter (Bar Item 9) Hobart Model No. LXGER-2 (6" LEG STAND) Advansys™ Undercounter Dishwasher/Glasswasher with Energy Recovery, Hot Water Sanitation, .62 gal per rack, 30 or 24 Racks/Hour, Fresh Water Rinse, Steam Elimination, Smart Sensing, Auto Delime notification & cycle, Auto Chemical Priming, with detergent, rinse aid & delime pumps, 2 Programmable Cycles, Advanced Service Diagnostics, electric tank heat, 120/208-240(3W)/60/1, ENERGY STAR®, Free factory startup for installations within a 100 mile radius of a Hobart service office; installation beyond 100 miles will be charged at the quoted rate by the local Hobart service office 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours 1 ea NOTE: All LXGe Glasswashers ship with a leg stand assembled at the factory - additional leg stands are available as accessory parts 1 ea DWT-LXE Drain water tempering kit for LXe 1 ea Installation of DWT kit only (NET) 4 ea DISHRACK-GLASS Wine Rack, 19-3/4"W x 19-3/4"D x 4"H

19 Soft Serve Machine (Café Item 10) Stoelting Model No. F131-3812 Soft-Serve Freezer, counter top, 22"W x 28-3/8"D x 34-3/8"H, air cooled,

(2) flavors with twist, gravity, (2) 12 quart hoppers, & (2) 3.4 quart freezing cylinder, IntelliTec2™ control, self-closing spigot, stainless steel exterior, R- 448A, 12,000 BTU/hour compressor, (2) 3/4-hp motors, 208-240v/60/1-ph, 12.0 amps, NEMA 6-20P, cUL, NSF (Mix inlet regulator required) 1 ea 1 year parts & labor warranty, standard (North America Only) 1 ea 5 year warranty on compressor, evaporator/hopper assembly, drive motor, speed reducer, auger shaft & auger flights (against breakage) standard 1 ea F131-38I2/START-UP FEE Factory Start-up Fee, for F131-38I2 2 ea 2149243-01 2A Carb Assembly 3/16" hole, for models E131, F131, F144, SF144, F231 & SF121 (included)

20 Undercounter Refrigerator (Bar Item 13) 1

Hoshizaki Model No. UR27B Steelheart Series Undercounter Refrigerator, reach-in, one-section, 27"W,

7.21 cu. ft., self-contained rear mounted refrigeration system, (1) solid hinged door, (1) adjustable shelf, stainless steel interior, stainless steel exterior front, sides & top, (4) 4" stem casters (2 with brakes), R290 Hydrocarbon refrigerant, 1/6 HP, NEMA 5-15P, ETLSanitation, cETLus, ENERGY STAR

1 ea Warranty: 3-Year parts & labor on entire machine 1 ea Warranty: 5-Year parts on compressor 1 ea 115v/60/1-ph, 2.5 amps, standard

21 Reach-In Undercounter Freezer (Bar Item 14) Hoshizaki Model No. UF27B-D2 Steelheart Series Undercounter Freezer, one-section, 7.2 cu. ft., self contained rear mounted refrigeration system, (2) stainless steel drawers allow for 6" deep pans, hot gas condensate removal, stainless steel interior, stainless steel exterior front, sides & top, (4) 4" stem casters (2 with brakes), R290 Hydrocarbon refrigerant, 1/5 HP, cord, NEMA 5-15P, cETLus, ETL-Sanitation 1 ea Warranty: 3-Year parts & labor on entire machine 1 ea Warranty: 5-Year parts on compressor 1 ea 115v/60/1-ph, 2.5 amps, standard