Attachment 2 - Agreement Articles.pdf

12 May 2026

Article Definitions

As used throughout this Agreement, the following terms shall have the meanings set forth below:

• Acceptance: The Government's formal, written acknowledgement that a prototype, deliverable, or milestone has been successfully demonstrated to meet the pre-defined Acceptance Criteria.

• Acceptance Criteria: The specific, measurable, and testable requirements that a prototype, deliverable, or milestone must meet to be accepted by the Government, as detailed in the Acceptance Test Plan or Statement of Work.

• Agreement: This Other Transaction (OT) Agreement, executed under the authority of 10 U.S.C. § 4022, including all attachments and subsequent modifications.

• Agreements Officer (AO): The Government official with the authority to enter into, administer, and modify this Other Transaction Agreement on behalf of the Government.

• Consequential Damages: Indirect, special, incidental, or punitive damages, including but not limited to, lost profits, loss of use, loss of revenue, or loss of data.

• Contractor / Performer/ Vendor: The non-government party to this Agreement.

• Controlled Unclassified Information (CUI): Information the Government creates or possesses, or that an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Government-wide policy requires or permits an agency to handle using safeguarding or dissemination controls.

• Cure Notice: A written notice from the non-breaching Party that details a material failure of performance and provides the breaching Party with a specified period to correct the failure.

• Cyber Incident: An action taken through the use of computer networks that results in a compromise or an actual or potentially adverse effect on an information system or the Controlled Unclassified Information (CUI) residing therein.

• Cybersecurity Maturity Model Certification (CMMC): The DoD's framework for verifying that a Performer has implemented the required cybersecurity standards to protect CUI.

• Direct Damages: The damages that arise naturally and foreseeably from a breach of this Agreement in the usual course of events. This does not include Consequential Damages as defined above.

• Equitable Settlement: A negotiated amount intended to fairly compensate a Party for work performed and costs incurred, particularly in the event of a termination.

• Force Majeure: An event beyond the reasonable control of a Party and without their fault or negligence that delays or prevents performance of an obligation under this Agreement. Such events may include, but are not limited to, acts of God, acts of a public enemy, acts of the Government in its sovereign capacity, fires, floods, epidemics, quarantine restrictions, strikes, and freight embargoes.

• Government-Furnished Property (GFP): Property in the possession of, or directly acquired by, the Government and subsequently furnished to the Performer for the performance of this Agreement.

• Government Purpose Rights: The right for the Government to use, modify, reproduce, and disclose technical data or computer software within the Government without restriction; and to release or disclose it outside the Government and permit its use for U.S. Government purposes only.

• Latent Defect: A hidden defect in a delivered item that existed at the time of acceptance but was not discoverable through a reasonable inspection or the execution of the Acceptance Criteria.

• Limited Rights (for Technical Data): The right for the Government to use, modify, and reproduce technical data within the Government only. The Government may not disclose the data outside the Government or use it for manufacturing without the Performer’s express written permission.

• Milestone: A specific, demonstrable event or accomplishment defined in the "Milestone and Payment Schedule" that, upon successful completion and acceptance, triggers a payment to the Performer.

• Milestone and Payment Schedule: The structure to this Agreement that details all payable milestones, the specific completion criteria for each, and the corresponding payment amounts.

• Modification: A formal, written change to this Agreement that is signed by the authorized representatives of both Parties.

• Party / Parties: The Government and the Performer, individually or collectively.

• Restricted Rights (for Computer Software): The right for the Government to use computer software within the Government only. The Government may not decompile, reverse engineer, or disclose the software outside the Government without the Performer’s express written permission.

• Statement of Objectives (SOO) / Statement of Work (SOW): The attachment to this Agreement that describes the scope of work, tasks, and deliverables required of the Performer.

• Unlimited Rights: The right for the Government to use, modify, reproduce, disclose, perform, display, or release technical data or computer software in whole or in part, in any manner, and for any purpose whatsoever, and to have or authorize others to do so.

Article: Demonstration and Acceptance

This Article defines the process by which all major prototype deliverables under this Agreement are demonstrated, reviewed, and formally accepted by the Government.

A. Basis for Acceptance

The Prototype Definitions (Proof of Concept and Operational Utility) shall serve as the definitive acceptance criteria for this Agreement. Acceptance of each prototype is contingent upon the vendor's successful delivery and verification of every item identified in the corresponding definition. No separate or post-award acceptance test plan is required, as the criteria are fully established herein.

B. The Acceptance Process

1. Demonstration through Delivery: The Performer shall "demonstrate" a prototype by providing written notification to the Agreements Officer that all required deliverables for a given phase are complete and have been submitted to the Government for review.

• Successful Proof of Concept Prototype: A successful proof of concept prototype is achieved upon the delivery and Government acceptance of one (1) design that is delivered in accordance with performance parameters defined in Attachment 1, and follows the successful completion of all preceding design reviews (conceptual design, design reviews, and final design).

• Successful Operational Utility Prototype: A successful operational utility prototype is achieved when the designed and installed afocal relay optics demonstrate a high degree of contribution to mission success within the operational environment. Success is defined by the afocal relay optics’ mission effectiveness, seamless integration with existing infrastructure, logistical sustainability, cost-effectiveness, and adaptability, which ultimately contributes to the lethality and readiness of the Department of War.

2. Government Verification: The Government will review the submitted deliverables against the specific relevant Prototype Definition.

3. Formal Acceptance: Acceptance shall occur only upon the Government’s issuance of a formal written acknowledgement that the Performer has successfully delivered and verified all required elements for that phase. This written acceptance is the official event that concludes a project phase.

C. Correction of Deficiencies

Should any submitted deliverable fail to meet the acceptance criteria during Government verification, the Performer shall correct all identified deficiencies at no additional cost to the Government and shall re-submit the deliverable for evaluation. If the Government, at its sole discretion, agrees to accept a prototype with minor, non-critical deficiencies, the Parties may negotiate an equitable adjustment to the Agreement price.

D. Latent Defects

The Performer’s responsibility for the quality of the final, physical Operational Utility Prototype extends beyond initial acceptance. A latent defect is a hidden flaw, not discoverable through reasonable inspection during final verification, which causes the prototype to fail to meet its performance or structural requirements after acceptance. The Performer shall be responsible for correcting such defects at its own expense, provided the Government provides notice:

1. Within a reasonable time after the defect was discovered or should have been discovered; and

2. Before any substantial change or modification occurs in the condition of the prototype, unless the change is a direct result of the defect itself.

Article: Assignment of Payments

The Performer may assign its rights to receive payments due under this Agreement to a bank, trust company, or other financing institution. Any such assignment must be made in writing and provided to the Agreements Officer and the designated payment office.

However, the Performer may not assign its rights to receive payment if such payment is made directly by a third party.

Article: Agreement Modifications

A. Mutual Agreement for Changes Either Party may propose changes to the scope, schedule, price, or other material terms of this Agreement.

All such changes shall be subject to negotiation between the Parties.

B. Formalization of Changes No change shall be effective until it is captured in a formal, written modification to this Agreement, signed by the authorized representatives of both the Government and the Performer.

C. Administrative Changes Purely administrative changes, including, but not limited to funding increases, updating points of contact, or correcting accounting information, may be made unilaterally by the Government’s Agreements Officer via written notice to the Performer.

Article: Collaborative Dispute Resolution

A. Guiding Principles The Parties shall engage in timely, cooperative, and good-faith communication to resolve any dispute, claim, or disagreement arising from or related to this Agreement. All disputes, including but not limited to allegations of breach, shall be first resolved exclusively under the procedures set forth in this Article.

B. Resolution Process

1. Initial Resolution: When disputes, misunderstandings, or disagreements arise, the Parties agree to make reasonable efforts to resolve them through discussion and mutual agreement at the earliest opportunity between their respective Project Managers.

2. Senior-Level Escalation: If the Parties are unable to reach a mutually agreed solution within fifteen (15) business days, the matter shall be considered a conflict to be resolved between the Government's Agreements Officer and Legal Team and the Performer’s designated senior leadership and Legal Team.

3. Formal Notice: If the conflict remains unresolved by mutual agreement, the aggrieved Party shall formally document the dispute by notifying the other Party through the cognizant Agreements Officer. The notification shall include the relevant facts, the unresolved issues, the clarification or remedy sought, and the rationale for why the requested remedy is appropriate.

4. Written Response: The Party receiving the notice shall provide a written response detailing its position and a proposed resolution within thirty (30) business days.

5. Seeking Further Relief: Upon the issuance of the final decision, and only after the escalation procedures above have been exhausted, the aggrieved Party may pursue any available relief. The Performer acknowledges that state courts and agencies lack jurisdiction over the Federal Government. Therefore, any litigation shall be brought exclusively in a United States Federal Court of competent jurisdiction. The Contract Disputes Act shall not apply to this Agreement.

Nothing in this Agreement shall be construed as a waiver of the Government’s sovereign immunity or consent to suit except as otherwise authorized by law

C. Alternative Dispute Resolution (ADR) At any stage, the Parties may mutually agree in writing to utilize an ADR procedure to resolve a dispute.

• Selection of Neutral Party: Any appointed mediator or arbitrator shall be mutually agreed upon by both Parties. If the Parties cannot agree on a neutral party within thirty (30) days, they shall request a list of qualified neutrals from a reputable ADR organization (such as the American Arbitration Association or JAMS) to facilitate the selection.

• Costs: Unless otherwise agreed to in writing, the costs of arbitration or mediation shall be shared equally by both Parties.

Article: Excusable Delays

A. Definition Neither the Government nor the Performer shall be considered in breach or default of this Agreement for a failure or delay in performance caused by an event beyond their reasonable control and without their fault or negligence. Such events, often referred to as Force Majeure, may include, but are not limited to:

acts of God, acts of a public enemy, acts of the Government in its sovereign capacity, fires, floods, epidemics, quarantine restrictions, strikes, freight embargoes, or unusually severe weather.

B. Notification and Mitigation The Party affected by such an event shall provide prompt written notice to the other Party, describing the event, its cause, and its anticipated impact on performance. The affected Party shall also make all reasonable efforts to mitigate the effects of the event and minimize any delay.

C. Agreement Adjustment Upon receipt of the notice, the Parties shall promptly consult to determine the appropriate path forward. If the event results in a material impact on the Agreement's cost or schedule, the Parties shall negotiate an equitable adjustment to the relevant terms of the Agreement, to be captured in a formal modification.

Article: Intellectual Property Indemnification

A. Indemnification The Performer shall defend and indemnify the Government and its officers, employees, and agents against liability, including costs, for any claim of patent, trademark, or copyright infringement arising from the prototype or services delivered under this Agreement (the "Claim").

B. Exceptions to Indemnification This indemnification shall not apply to any Claim to the extent it arises from:

1. The Performer’s compliance with specific, detailed written specifications or design direction provided by the Government;

2. The use of Government-Furnished Information, software, or property; or

3. A modification to the prototype or service made by the Government without the Performer’s consent.

C. Procedure In the event of a Claim:

1. The Government shall provide prompt written notice of the Claim to the Performer.

2. Once the Performer has indemnified the Government, the Performer shall have the right to control the defense and settlement of the Claim.

3. The Government shall provide reasonable information and assistance to the Performer, at the Performer’s expense, in the defense of the Claim.

4. The Performer shall not agree to any settlement that imposes a financial obligation or admits liability on the part of the Government without the Government’s prior written consent, which shall not be unreasonably withheld.

Article: Payment and Invoicing

A. Payment Based on Milestones Payments shall be made upon the successful completion and acceptance of the milestones detailed in the "Milestone and Payment Schedule," which is attached to and made a part of this Agreement. Partial payment for partially completed milestones is not authorized unless otherwise specified in the schedule.

B. Invoicing Upon the acceptance of a payable milestone, the Performer shall submit a proper invoice in accordance with the "Invoicing" article of this Agreement. A proper invoice must include, at a minimum, the Agreement number, a description of the completed milestone, and the corresponding payment amount.

C. Payment Terms The Government shall make payment within thirty (30) days of receiving a proper and accurate invoice.

D. Overpayments and Other Debts

1. Overpayments: If the Government has made an overpayment or duplicate payment, the Performer shall promptly remit the excess amount to the payment office cited in this Agreement. The remittance shall include a description of the overpayment, the Agreement number, and the affected milestone.

2. Other Debts: Any amount payable from the Performer to the Government shall be considered a debt. The Parties shall first seek to resolve any debts by mutual agreement. If unresolved, amounts due to the Government may accrue interest in accordance with applicable U.S. Treasury regulations.

E. Final Payment The final payment under this Agreement shall be made after the successful completion, demonstration, and Government acceptance of all obligations set forth herein.

F. Invoicing The contractor shall submit invoices through Wide Area Workflow (WAWF), https://wawf.eb.mil/, and incorporate the data from the table below:

Invoice Type: Combo Pay Official DoDAAC: F03000 Issue By DoDAAC: FA9101 Admin DoDAAC: FA9101 Inspect By DoDAAC: F1EEPM Ship To Code: FY1476

WAWF POC:

disa.global.servicedesk.mbx.eb

- ticket-requests@mail.mil

Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

Article: Risk of Loss

The Performer shall bear all risk of loss or damage to the prototype and any other items delivered under this Agreement until they are formally accepted by the Government, as defined in the "Testing, Demonstration, and Acceptance" article.

The Performer's responsibility includes the safe transport and delivery of all items to the destination(s) specified in this Agreement, including Arnold Air Force Base, TN.

Article: Taxes and Duties

The Performer is responsible for identifying and paying all applicable Federal, State, and local taxes and duties associated with its performance under this Agreement.

The mutually agreed-upon price of this Agreement is all-inclusive, and the Government shall not be responsible for, nor shall the price be adjusted to accommodate, such taxes or duties.

Article: Termination for Convenience

A. Government's Right to Terminate The Government may terminate this Agreement, in whole or in part, for its convenience by providing written notice to the Performer.

B. Performer's Obligations Upon receipt of the termination notice, the Performer shall:

1. Immediately cease all work as directed in the notice.

2. Place no further subcontracts or orders for materials or services, except as necessary for completing the non-terminated portion of the Agreement.

3. Take all reasonable steps to minimize costs allocable to the work covered by the notice.

C. Settlement and Payment Following termination, the Parties shall negotiate a fair and equitable settlement. The Government shall pay the Performer for:

1. All work acceptably performed and milestones completed prior to the effective date of termination.

2. Reasonable, demonstrable costs incurred by the Performer as a direct result of the termination, such as costs for settling subcontracts.

For the purpose of this settlement, the Performer is not required to comply with the Cost Accounting Standards or the cost principles of the Federal Acquisition Regulation (FAR). However, the Government reserves the right to audit only those records necessary to verify the specific costs claimed as part of the termination settlement. The Performer shall not be paid for any costs that could have been reasonably avoided.

Article: Termination for Default

A. General Default and Cure Notice For any failure by a Party to perform a material obligation under this Agreement, the non-breaching Party may provide a written "cure notice" to the breaching Party. The notice shall describe the failure in reasonable detail and state the intent to terminate if the failure is not corrected. The breaching Party shall have thirty (30) days from receipt of the notice (or a longer period if mutually agreed) to cure the failure to the non-breaching Party’s reasonable satisfaction. If the breaching Party fails to cure the material failure within the specified period, the non-breaching Party may terminate this Agreement for default.

B. Termination for Failure to Maintain Good Standing Notwithstanding the cure period described in Section A, the Government may terminate this Agreement for default, effective immediately upon written notice, for a Performer's failure to maintain "Good Standing." A failure to maintain Good Standing includes, but is not limited to:

1. Failure to maintain a current and valid Joint Certification Program (JCP) certification.

2. Failure to maintain a current and valid Cybersecurity Maturity Model Certification (CMMC) Level 2 certification, verifiable in the Supplier Performance Risk System (SPRS).

These specific requirements are foundational, and their lapse constitutes a non-curable material breach, making the standard cure period inapplicable.

C. Settlement In the event of a termination for default under either Section A or B, the Parties shall negotiate an equitable settlement. The Government shall pay for any work acceptably performed and delivered prior to termination. The settlement shall also account for any demonstrable damages incurred by the non-breaching Party as a direct result of the default. Any rights or remedies provided by law shall be preserved.

Article: Title and Ownership

A. Title to Deliverables Title to the prototype and any other physical items delivered by the Performer under this Agreement shall pass to the Government upon the Government’s formal written acceptance of those items. This transfer of title is effective regardless of when or where the Government takes physical possession.

B. Title to Government Property Title to any property furnished by the Government to the Performer for use under this Agreement ("Government-Furnished Property") shall remain with the Government at all times.

Article: Limited Warranty

A. Express Limited Warranty The Performer warrants that for a period of TBD from the date of Government acceptance, the prototype will be free from defects in materials and workmanship and will conform to the mutually agreed-upon design specifications detailed in this Agreement.

B. Disclaimer of Other Warranties

THE EXPRESS LIMITED WARRANTY IN PARAGRAPH (A) IS THE SOLE AND EXCLUSIVE

WARRANTY PROVIDED. THE PERFORMER HEREBY DISCLAIMS ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

C. Exclusive Remedy The Government shall provide prompt written notice to the Performer of any breach of the limited warranty. The Performer's sole obligation, and the Government's exclusive remedy, shall be for the Performer, at its own expense, to either repair or replace the defective item.

D. Exclusions This warranty shall not apply to any defect arising from: (1) normal wear and tear; (2) modifications made by the Government without the Performer’s consent; or (3) damage caused by accident, abuse, or use of the prototype in a manner for which it was not designed after it has been accepted by the Government.

Article: Limitation of Liability

A. Disclaimer of Consequential Damages

IN NO EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER FOR ANY INDIRECT,

SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN

CONNECTION WITH THIS AGREEMENT...

B. Cap on Direct Damages Except for the obligations set forth in the "Intellectual Property Indemnification" article and liability for willful misconduct, each Party's total cumulative liability to the other for direct damages arising from or related to this Agreement shall not exceed the total price of this Agreement. For the purposes of this article, the "total price" is defined as the sum of all funds paid or obligated to be paid by the Government for the base effort and any options that have been formally exercised.

Article: Compliance with Law and Agreement Status

A. General Compliance The Performer shall comply with all Federal, State, and local laws that are generally applicable to commercial businesses operating within the United States.

B. Status of this Agreement The Parties agree and acknowledge that this Agreement is an Other Transaction executed under the authority of 10 U.S.C. § 4022. It is not a procurement contract and is therefore not subject to the Federal Acquisition Regulation (FAR) or its supplements, except for any law or regulation that is made specifically applicable to Other Transactions by Federal statute.

Article: Specific Statutory Requirements

A. Agreement Status The Parties acknowledge that this Agreement is an Other Transaction executed under the authority of 10 U.S.C. § 4022 and is not a Federal procurement contract. As such, it is not subject to the laws and regulations specifically applicable to procurement contracts.

B. Applicable Statute The Performer agrees to comply with 31 U.S.C. § 1352, “Limitation on use of appropriated funds to influence certain Federal contracting and financial transactions,” which is made applicable to this Agreement by law. This statute requires the Performer to certify that it has not and will not use federally appropriated funds to lobby any Federal agency or Congress in connection with the award or modification of this Agreement.

Article: Third-Party Terms of Service (TOS) and End User License Agreements (EULAs)

A. Context The Parties acknowledge that performance under this Agreement may require the use of commercial products or services (e.g., software, cloud services) that are subject to a provider’s standard EULA or

TOS.

B. Unenforceable Provisions The U.S. Government is prohibited by Federal law (including the Anti-Deficiency Act, 31 U.S.C. § 1341) from agreeing to certain terms commonly found in commercial EULAs and TOS. Accordingly, any provision that would create an open-ended or undefined financial obligation for the Government, including but not limited to clauses requiring indemnification of the provider, is unenforceable against the Government and shall be deemed stricken from such EULA or TOS.

C. Acceptance of Terms No action by a Government employee or authorized end-user, including the act of clicking "I agree" to a "click-wrap" or "browse-wrap" agreement, shall be construed as binding the Government to any unenforceable provision as described in Paragraph B.

D. Exception This article does not apply to any indemnification by the Government that is expressly authorized by a separate Federal statute.

Article: Limitation of Obligation and Milestone Funding

A. Incremental Funding This Agreement is incrementally funded. The total estimated value of the Agreement is $[Total Estimated Value]; however, only a portion of this amount is currently available for performance. The Government’s total liability under this Agreement is limited to the amount of funds allotted.

B. Funds Currently Allotted The total amount of funds currently allotted and available for payment by the Government under this Agreement is $[Amount Currently Allotted].

C. Performer's Obligation to Limit Work The Performer is authorized to perform work and incur costs up to the total amount of funds currently allotted. The Performer is not authorized, and agrees it shall not, continue work or incur costs beyond this point. The Government will not be obligated to reimburse the Performer for any costs incurred in excess of the funds allotted.

D. Notification Requirement The Performer shall monitor its expenditures and shall notify the Agreements Officer in writing at least sixty (60) days before it anticipates that its costs will exceed 80% of the currently allotted funds. This notification shall include an estimate of the additional funding and the date required to continue performance without interruption.

E. Funding of Future Work The Government anticipates allotting additional funds for subsequent milestones as work progresses and subject to the availability of appropriations. The allotment of any additional funds shall be made via a formal, written modification to this Agreement signed by both Parties. Nothing in this Article shall be construed as obligating the Government to allot additional funds at any time.

Article: Intellectual Property Rights

A. Guiding Principles The Parties agree to a fair allocation of rights in intellectual property that reflects each Party’s contribution to its development. The goal is to provide the Government with the rights it needs for its purposes while preserving the Performer's ability to commercialize its technology.

B. Definitions

1. "Unlimited Rights": The right for the Government to use, disclose, reproduce, prepare derivative works, distribute, and perform publicly and display publicly, in any manner and for any purpose whatsoever, and to have or permit others to do so.

2. "Government Purpose Rights": The right to use, modify, reproduce, release, or disclose the technical data or computer software within the Government without restriction; and to release or disclose the data/software outside the Government and permit its use for U.S. Government purposes only. This includes the right to authorize a third party to use the data/software to manufacture an item for the direct use of the U.S. Government.

3. "Limited Rights" (for Technical Data) / "Restricted Rights" (for Computer Software): The right to use, modify, and reproduce the data/software within the Government only. This right does not include permission to disclose the data/software outside the Government or use it for manufacturing without the Performer’s express written permission.

C. Allocation of Rights

1. Exclusively with Government Funds: The Government shall receive Unlimited Rights in all technical data and computer software developed exclusively with Government funds under this Agreement.

2. Exclusively at Private Expense: The Government shall receive Limited/Restricted Rights in all technical data and computer software that was developed exclusively at the Performer’s private expense (i.e., background IP).

3. With Mixed Funding: The Government shall receive Government Purpose Rights in all technical data and computer software developed with a mix of Government and Performer funding under this Agreement. The Performer's cost-share contribution under this Agreement qualifies its developments for this category.

D. Marking of Data and Software To claim any rights other than Unlimited Rights, the Performer must mark all technical data and computer software with an appropriate restrictive legend identifying the rights asserted. Any data or software delivered without a restrictive legend shall be presumed to have been delivered with Unlimited Rights.

E. Invention Disclosure The Performer shall promptly disclose in writing to the Agreements Officer each invention conceived or first actually reduced to practice in the performance of this Agreement. Title to all such inventions shall remain with the Performer, subject to the Government's license rights as described herein.

F. Sub-agreements The Performer shall include this Article, suitably modified to identify the parties, in its sub-agreements.

The Performer remains responsible for ensuring the Government acquires all the rights it is entitled to under this Article.

G. Publication Coordination

The Performer shall coordinate all publication requests related to this agreement to the Agreements Officer at least 60 days prior to the requested publication date for approval. If the publication date arrives without an approval notification that does not get the Performer the right to continue with the publication.

Publications include, but are not limited to conferences, associations, and social media.

H. Conformity of Markings

The Government has the right to review, verify, challenge, and validate asserted restrictions to ensure conformity of markings. Under 10 U.S.C. 3782, the Government has the right to challenge asserted restrictions when there are reasonable grounds to question the validity of the assertion and continued adherence to the assertion would make it impractical to later procure competitively the item to which the data pertain. The Agreements Officer should return technical data bearing nonconforming markings to the Performer who has placed the nonconforming markings on such data to provide the Performer an opportunity to correct or strike the nonconforming marking at the Performer’s expense. If the Performer fails to correct the nonconformity and return the corrected data within 30 calendar days following the receipt of the data, the Agreements Officer may correct or strike the nonconformity at the Performer’s expense. When it is impracticable to return technical data for correction, Agreement Officers may unilaterally correct any nonconforming markings at Government expense.

Article: Stop-Work Order

A. Issuance of Order The Agreements Officer (AO) may, at any time, by written order to the Performer, require the Performer to stop all, or any part, of the work required by this Agreement for a specified period. Upon receipt of the order, the Performer shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order.

B. Action Following Stoppage Upon the conclusion of the stop-work period, the AO shall either:

1. Cancel the Stop-Work Order and direct the Performer to resume work; or

2. Terminate the work covered by the order in accordance with the "Termination" articles of this Agreement.

C. Equitable Adjustment If a Stop-Work Order is canceled and the Performer resumes work, the Parties shall negotiate an equitable adjustment to the delivery schedule, price, or any other term of the Agreement affected by the work stoppage, provided that:

1. The stop-work order resulted in an increase in the time or cost required for the performance of any part of this Agreement; and

2. The Performer notifies the AO of its intent to seek an adjustment within thirty (30) days after the work resumes.

Article: Delivery

A. Delivery Responsibility The Performer shall be responsible for all costs and arrangements related to the packaging, transportation, and delivery of all items and deliverables to the destination(s) specified in this Agreement, including Arnold Air Force Base, TN.

B. Risk of Loss Risk of loss or damage to all items and deliverables shall remain with the Performer until the Government's formal written acceptance of those items, as further defined in the "Demonstration and Acceptance" article.

C. Good Order and Condition All items shall be delivered in good order and condition, conforming to the requirements of this Agreement. The Performer shall provide the Government with a delivery schedule and necessary shipping documentation.

Article: Defense Priorities and Allocation System (DPAS)

This Agreement is a rated order, certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS). The Performer shall comply with all applicable requirements of the DPAS regulation (15 CFR Part 700).

Article: System for Award Management (SAM)

The Performer shall maintain an active registration in the System for Award Management (SAM) for the purposes of entity validation and electronic payment processing. This registration must be maintained throughout the entire period of performance of this Agreement, including through final payment.

The Parties agree that this requirement is for administrative and payment purposes only and does not incorporate the standard Federal Acquisition Regulation (FAR) "Representations and Certifications" from the SAM.gov portal into this Other Transaction Agreement. The Performer's binding representations for this Agreement are exclusively those stated in the "Performer Representations" article.

Article: Joint Certification Program (JCP)

The Performer shall obtain and maintain a valid certification under the Joint Certification Program (JCP) as a prerequisite to receive any export-controlled technical data under this Agreement, if applicable.

A. Certification Requirement The Performer shall obtain and maintain a valid certification under the United States/Canada Joint Certification Program (JCP), evidenced by an active DD Form 2345, as a prerequisite to receiving any unclassified, export-controlled technical data under this Agreement.

B. Performer Responsibility The Performer is solely responsible for managing and maintaining its own active certification status throughout the period of performance.

C. Sub-agreement Flow-Down and Verification If the Performer intends to share export-controlled technical data with any Sub-performer, the Performer is strictly responsible for ensuring that the Sub-performer possesses a valid JCP certification prior to the release of such data.

Article: Cybersecurity Requirements (CUI and CMMC)

A. Baseline Security and NIST SP 800-171 Implementation

1. Adequate Security: The Performer shall provide adequate security on all covered information systems used in the performance of any Project-Level Agreement. The Performer shall only process, store, or transmit Controlled Unclassified Information (CUI) or Federal Contract Information (FCI) on information systems that meet the security requirements established in this Article.

2. NIST SP 800-171: The Performer shall implement and maintain the 110 security controls detailed in the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171.

Implementation shall be documented in a System Security Plan (SSP) and, where applicable, a Plan of Action and Milestones (POA&M).

3. Cloud Computing: If the Performer utilizes an external cloud service provider to store, process, or transmit CUI, the Performer shall ensure the cloud service provider meets security requirements equivalent to the Federal Risk and Authorization Management Program (FedRAMP) Moderate baseline and complies with the incident reporting and media preservation requirements of this Article.

B. Cybersecurity Maturity Model Certification (CMMC)

1. Required Status: Because performance involves CUI, the Performer shall achieve and maintain a CMMC Level 2 Certification Assessment conducted by a Certified Third-Party Assessment Organization (C3PAO).

2. November 2026 Deadline & Alternative Path: The Alternative Compliance Path (possessing a current NIST SP 800-171 DoD Assessment in SPRS no older than 3 years and a compliance roadmap) must successfully close out any valid POA&Ms (within the strict 180-day limitation) and achieve full CMMC Level 2 C3PAO Certification no later than 10 November 2026.

3. Annual Affirmations: The Performer shall complete and maintain an annual affirmation of continuous compliance in the Supplier Performance Risk System (SPRS). This affirmation must be submitted by a senior company affirming official for each applicable CMMC Unique Identifier (UID) associated with the systems used in performance of the agreement.

C. Cyber Incident Reporting and Response

1. 72-Hour Reporting: When the Performer discovers a cyber incident that affects a covered information system, affects CUI residing therein, or affects the Performer’s ability to perform operationally critical support, the Performer shall rapidly report the incident to DoD at https://dibnet.dod.mil within 72 hours of discovery.

https://www.google.com/url?q=https%3A%2F%2Fdibnet.dod.mil

2. Medium Assurance Certificate: The Performer shall acquire and maintain a DoD-approved medium assurance certificate to report cyber incidents.

3. Malicious Software: If malicious software is discovered and isolated in connection with a reported cyber incident, the Performer shall submit the malicious software directly to the DoD Cyber Crime Center (DC3) in accordance with DC3 instructions.

4. Media Preservation: The Performer shall preserve and protect images of all known affected information systems and relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow the Government to request the media or decline interest.

5. Forensic and Damage Assessment Access: Upon request, the Performer shall provide the Government with access to additional information, equipment, and all damage assessment information necessary to conduct forensic analysis.

6. Information Protection: The Government will protect against the unauthorized use or release of Contractor attributional/proprietary information reported under this section, releasing it outside DoD only for authorized national security, law enforcement, or incident mitigation purposes.

D. Government Assessments (Medium and High)

1. Assessment Rights: The Government reserves the right to conduct a Medium or High NIST SP 800-171 DoD Assessment (e.g., via the Defense Contract Management Agency (DCMA) or other authorized personnel) to verify the security controls described in the Performer's SSP. The Performer shall provide necessary access to facilities, systems, and personnel.

2. Precedence and Rebuttal: The results of a Government-conducted Medium or High Assessment will take precedence over self-assessments. Upon completion of an assessment, the Performer shall have 14 business days to provide additional information to rebut findings prior to the Government posting the summary level scores to SPRS.

E. Sub-agreement Flow-Down Requirements The Performer is responsible for ensuring the security of CUI flowed down to its subcontractors. The Performer shall:

1. Include the substance of this entire Cybersecurity Article in all sub-agreements (including those for commercial products or services) that involve the processing, storing, or transmitting of FCI or CUI.

2. Prior to awarding a sub-agreement, verify that the subcontractor has the current, appropriate CMMC status (or NIST SP 800-171 SPRS score if operating under the pre-November 2026 alternative path timeline) required for the information being flowed down.

3. Ensure subcontractors complete and maintain their own annual SPRS affirmations of continuous compliance.

4. Require subcontractors to rapidly report cyber incidents to DoD and provide the incident report number to the prime Performer.

Article: Country of Origin https://monitoring.corp.google.com/packet

A. Policy It is the policy of the Department of War to prioritize products and components manufactured in the United States or its qualifying countries.

B. Performer Representation The Performer represents that, to the best of its ability and knowledge, the end products delivered under this Agreement will be manufactured in the United States or a "qualifying country." For the purposes of this article, a "qualifying country" is defined as a country that has a reciprocal defense procurement memorandum of understanding or international agreement with the United States. As of the date of this Agreement, these countries include: Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Egypt, Estonia, Finland, France, Germany, Greece, Israel, Italy, Japan, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovenia, Spain, Sweden, Switzerland, Turkey, and the United Kingdom.

C. Waiver The Government's Agreements Officer may authorize the acquisition of products from other countries if it is determined to be in the Government's best interest for the successful execution of this prototype project.

Article: Cyber Incident Reporting and Response

A. Definition of Cyber Incident For the purposes of this article, a "Cyber Incident" is an action taken through the use of computer networks that results in a compromise or an actual or potentially adverse effect on the Performer's information system or the Controlled Unclassified Information (CUI) residing therein.

B. Incident Reporting Requirement

1. Rapid Reporting: When the Performer discovers a Cyber Incident, it shall rapidly report the incident (within 72 hours) to the Department of War at the DIBNet portal: https://dibnet.dod.mil.

2. Access Certificate: The Performer is responsible for obtaining and maintaining the required DoD-approved medium assurance certificate to access the DIBNet portal for reporting.

C. Post-Incident Cooperation Following a Cyber Incident report, the Performer shall:

1. Preserve Data: Preserve and protect images of all known affected information systems and all relevant monitoring and packet capture data for at least 90 days from the submission of the report.

2. Provide Access: Upon request from the Agreements Officer, provide the Government with access to additional information or equipment necessary to conduct a forensic analysis and damage assessment.

3. Submit Malicious Software: Submit any malicious software discovered in connection with the incident to the DoD Cyber Crime Center (DC3) in accordance with their instructions.

D. Protection of Performer Information The Government shall protect any of the Performer's confidential or proprietary information that is shared during an incident investigation to the maximum extent permitted by law, including through the exercise of applicable Freedom of Information Act (FOIA) exemptions.

https://www.google.com/url?q=https%3A%2F%2Fdibnet.dod.mil

E. Sub-agreements The Performer shall flow down the substance of these reporting and cooperation requirements to all sub-agreements where CUI is handled. The Performer shall require its subcontractors to rapidly report any Cyber Incident directly to the Performer, who is then responsible for reporting to the DoD in accordance with this article.

Article: Prohibited Sources

A. Prohibition on Certain Telecommunications and Video Surveillance Equipment (Section 889) In accordance with Section 889 of the National Defense Authorization Act for Fiscal Year 2019, the Performer is prohibited from providing or using telecommunications or video surveillance equipment or services produced or provided by Huawei Technologies Company, ZTE Corporation, Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, Dahua Technology Company, or their subsidiaries.

B. Prohibition on Covered Defense Telecommunications Equipment or Services (Section 1656) In accordance with Section 1656 of the National Defense Authorization Act for Fiscal Year 2018, the Performer is prohibited from providing any equipment, system, or service that uses telecommunications equipment or services from The People’s Republic of China or The Russian Federation in systems supporting DoD's nuclear deterrence or homeland defense missions.

C. Prohibition on Kaspersky Lab Products and Services (Section 1634) In accordance with Section 1634 of the National Defense Authorization Act for Fiscal Year 2018, the Performer is prohibited from providing to the Government, or using in the performance of this Agreement, any hardware, software, or service developed or provided, in whole or in part, by Kaspersky Lab or its affiliates.

D. Prohibition on Certain Items from Communist Chinese Military Companies (Section 1261) In accordance with Section 1261 of the National Defense Authorization Act for Fiscal Year 2021, the Performer is prohibited from acquiring any items covered by the United States Munitions List (USML) or the "600 series" of the Commerce Control List (CCL), directly or indirectly, from any entity identified as a "Communist Chinese military company" by the Department of War.

E. Performer Representation By executing this Agreement, the Performer represents that it will not provide or use any items, equipment, or services prohibited by the statutes referenced in Paragraphs A, B, C, and D.

F. Reporting and Flowdown The Performer shall promptly report any discovery of such prohibited equipment, products, or services to the Agreements Officer and shall flow down the substance of this entire article to all sub-agreements.

Article: Prohibition on ByteDance Covered Applications

A. Prohibition In accordance with the "No TikTok on Government Devices Act," the Performer is prohibited from having or using a "covered application" on any "project information technology."

B. Definitions

1. Covered Application: Means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or its affiliates.

2. Project Information Technology: Means any information technology (including computers, mobile devices, and software) used by the Performer or its employees in the performance of this Agreement. This also includes any information technology owned or managed by the Government that the Performer may use.

C. Exception This prohibition does not apply if the Agreements Officer provides prior written notification to the Performer that a mission-critical exception has been granted in accordance with Federal policy.

D. Sub-agreements The Performer shall flow down the substance of this article to all sub-agreements at any tier.

Article: Comptroller General Access to Records

In accordance with 10 U.S.C. § 4022(c)(1), the Comptroller General of the United States, or an authorized representative, shall have access to and the right to examine any records of the Performer, or any of its subcontractors, that directly pertain to this Agreement. This right of access shall exist for a period of three

(3) years after final payment under this Agreement.

Article: Phased Execution and Optional Milestones

A. Phased Approach The Parties anticipate that this prototype effort may be accomplished in multiple, sequential phases. The initial scope of work and funding under this Agreement cover the "base" phase(s) as detailed in the Statement of Work. Future phases of work are referred to herein as "Options."

B. Definition and Exercise of Options

1. Definition for This Agreement: For the purposes of this Agreement, an "Option" is defined as a potential future phase of work that is not yet authorized or funded. It is explicitly understood that an "Option" under this Agreement is not an "option" as defined in the Federal Acquisition Regulation (FAR).

2. Not a Unilateral Right: The existence of an Option does not grant the Government a unilateral right to exercise it.

3. Mutual Agreement Required: The exercise of any Option shall be accomplished only through a formal, bilateral written modification to this Agreement, signed by the authorized representatives of both Parties following a mutual agreement on the Option's scope, schedule, price, and any other relevant terms.

C. Consideration and Evaluation Upon the…