Attachment 1 Statement of Work for N6660423Q0612.pdf

v1.2_FEBRUARY2021

PR NO. 1301087132

PID NO: 10-0376

STATEMENT OF WORK

(SOW)

Geometric Dimensioning and Tolerancing (GF&T) Training Courses PR No. 1301087132

1.0 Background

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is a Naval research activity operating under the direction of the Commander, Naval Sea Systems Command (NAVSEA). We provide research, development, test and evaluation, engineering, analysis, and assessment; as well as Fleet support capabilities for submarines, autonomous underwater systems, and offensive and defensive undersea weapon systems; and stewards existing and emerging technologies in support of undersea warfare.

1.1 Places of Performance

Performance will take place at a contractor provided facility within 10 miles of NUWCDIVNPT, Newport, RI.

1.2 Authorized Users

NUWCDIVNPT Code 1016 is the sole authorized user of this purchase order.

1.3 Sponsors

This purchase order will be sponsored by NUWCDIVNPT Code 10.

1.4 Types of Funding

This purchase order will be funded using NUWCDIVNPT Overhead funding.

2.0 Scope

The contractor shall conduct the following courses for twenty (20) students per class:

2.1 Application and Interpretation of Geometric Dimensioning and Tolerancing, five (5) day course

2.2 Reviewing and Principles of Geometric Dimensioning and Tolerancing, five (5) day course

The contractor shall provide all computer equipment and software necessary to teach the courses.

A training certificate for each individual shall be delivered upon class completion. The contractor shall provide an off-site location within ten (10) miles from NUWCDIVNPT for face-to-face training.

3.0 Reserved

4.0 Technical Requirements

4.1 Course: “Application and Interpretation of Geometric Dimensioning and Tolerancing”

The contractor shall conduct the five (5) day course entitled “Application and Interpretation of Geometric Dimensioning and Tolerancing.” The contractor shall provide all required course materials (i.e. laptop, course manual, pen, notepad, and course file DVD/USB) for a maximum of twenty (20) attendees. The typical audience for this workshop consists of design engineers, process engineers, planners, machine programmers, tool and gage designers, toolmakers, machinists’ quality engineers, managers and project leads. The course objective is to teach a uniform method of specifying GD&T on design drawings and to provide a common interpretation of GD&T to drawing users. The class shall explore design requirements and tolerances that allow economical manufacturing and inspection methods. Students learn that creating production drawings is a team effort between design, drafting, manufacturing and quality control. The course shall cover (but is not limited to):

• Knowledge of GD&T to interpret and generate drawings

• American National Standard Institute (ANSI) Y:14.5

• Screw Thread and Envelope Rules

• Axis and Center Plane Straightness Control

• Circularity, Cylindricity and Conicity Control

• Datum Definition, Placement, Targets and Selection.

• Parallelism, Perpendicularity, and Angularity Control

• Position and Fastener Theory

• Circular, Concentricity and Total Runout Control

• Position tolerance of non-cylindrical features

• Symmetry

• Non-rigid parts

• Simultaneous requirements

• Virtual Condition Rule

4.2 Course: “Reviewing and Principles of Geometric Dimensioning and Tolerancing”

The contractor shall conduct the five (5) day course titled “Reviewing and Principles of Geometric Dimensioning and Tolerancing.” The contractor shall provide all required course materials for a maximum of twenty (20) attendees. This course is intended for design and manufacturing personnel who require use of extended principles of GD&T to communicate design intent for more complex parts and assemblies. This course shall cover (but is not limited to):

• Material Condition Modifiers

• Profile control

• Graphical Inspection Analysis (Paper Gaging)

• Functional Gaging

• Tolerance zone shapes (Fundamental and Derived zones)

• Tolerance distribution techniques (Fixed, Floating and Double Fixed Fasteners)

• Composite Position/Profile Control

• ASME Standards

• ASME/ISO Differences

• Review of ASME Y14.41-2003 Standard

PREREQUISITE: Successful completion of the Application and Interpretation of Geometric Dimensioning and Tolerancing (GD&T) is a prerequisite.

5.0 Government Furnished Information

The following Government Furnished Information (GFI) will be made available under this contract:

5.1 Course Attendee Rosters

6.0 RESERVED

7.0 Compliance with Information and Communication Technology Accessibility Requirements

The Government has determined that this procurement is compliant with the Information and Communication Technology (ICT) Accessibility Standards (36 C.F.R. § 1194.3 - Chapter 2 E202 General Exceptions of Section 50 Refresh). The 508 compliant ID # and applicable EIT Accessibility Standards