Attachment 1 - Specifications for Portable Pump and Diesel Power Unit~1.pdf
PDF 287 KB Posted
- Solicitation number
- 23-422DNR-REALT-B-36134
- Issued by
- St. Clair County, Illinois
About this file
This document is a specification for a trailer-mounted centrifugal pump and diesel power unit requested by the Illinois Department of Natural Resources (IDNR) for the Shelbyville State Fish and Wildlife Area (SFWA). The pump assembly must have a minimum 15,000 GPM capacity and be capable of transferring non-potable water for wildlife management purposes. The vendor is responsible for providing a fully compatible and operational system, which must include a 24" diameter centrifugal pump, 300+ HP diesel engine with PTO, fuel tank, and control unit. The pump and power unit must meet or exceed the detailed technical specifications outlined in the document. This opportunity is being solicited through an Invitation for Bid (IFB) process.
The IFB requires electronic submission only, with no paper responses accepted. Pricing terms, set-asides, and funding sources are not specified in the provided documentation. The contract term and any renewal options are also not detailed.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IPG Active Registered Vendor Disclosure - Formally Forms B v.23.1~15.docx | DOCX document | |
| Vendor Disclosures - Formerly Forms A~14.docx | DOCX document | |
| Attachment - Notice of Electronic Submission Only~97.pdf | ||
| Shelbyville SFWA Portable Trailer Mounted Pump IFB NEW.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for Trailer Mounted Centrifugal Pump and Diesel Power Unit
Illinois Department of Natural Resources – Shelbyville State Fish and Wildlife Area (SFWA)
IDNR File# 3‐23‐004
These specifications refer to a complete pump assembly consisting of a trailer mounted centrifugal pump and a trailer mounted diesel engine power unit with an on‐board fuel tank and control unit. The pump assembly will be used to transfer non‐potable water from various water sources for wildlife management purposes. The Vendor shall be responsible for providing and ensuring compatibility of all components required for the completed system, and provide certification from the pump manufacturer that the proposed diesel power unit, features, and trailer are suitable for use with the proposed pump if sourced separately. The unit shall be delivered in fully operational condition and shall have been previously tested by the manufacturer/Vendor.
Pump
24” Diameter Centrifugal Trailer Pump
28’ overall length
24” dia. discharge pipe constructed of A36 mild steel casing with a 90‐degree elbow at the impeller and three tangent sections welded at angles to create an arched center that contours perpendicularly to a levee bank.
PTO Driven (540 RPM) with heavy‐duty u‐joints
Continuous Output Capability: Min. 15,000 GPM (gallons/minute) @ 540 RPM
A36 steel 4” square structural tubing frame
Enclosed type centrifugal radial flow impeller with brass and rubber marine bearings
Triple Sealed Bearings (Drive Shaft, Wheels) w/ Grease Fittings
3,500‐pound rated axle with road‐worthy 15” wheels and 4‐ply tires
Includes attachable 50‐foot length of 24” UV‐resistant “lay flat” discharge hose
Diesel Power Unit
Diesel engine with PTO drive system, fuel tank, and control unit mounted on a tandem axle trailer.
Proposed power unit, features, and configuration shall be certified and approved by pump manufacturer as being compatible with proposed pump system. Diesel power unit shall include the following at a minimum:
Minimum 300 horsepower rating
Six (6) cylinder, in‐line, 4‐cycle
Turbocharged and air‐to‐air aftercooled aspiration
Pre‐piped air‐cooled radiator w/ engine driven fan
Electrical starting & alternator charging system
Emergency shut down modes for low oil pressure, high water temperature, engine overspeed
Heavy duty PTO system, including driveshaft
Hand Operated Clutch
Speed Reduction Assembly
Safety Guards
100 gallon capacity day‐use Fuel Tank w/ lockable cap
Meets current Emission & Highway Standards
Approved manufacturers: John Deere, Cummins, Caterpillar
Engine Control Unit o Engine Start Switch o Emergency Stop o Gauges (oil pressure, coolant temp., elapsed run time, ammeter, tachometer) o Visual & Audio Alarms w/ Manual Reset
Representative Photo of Existing Gator Pump “Ditchrider” Pump Unit
File details come from the government source that posted it. Updated .