Specifications Summary

This document is a product specification sheet for the procurement and delivery of a specific plow unit to Grand Teton National Park for road and highway maintenance operations.

The required equipment is a Bonnell Industries 12DD42MX1 Model Distant Discharge Two-eared steel plow with an orange polyurethane enamel finish. The plow specifications include a 12-foot cutting edge with 42-inch straight height and 58-inch discharge ear height moldboard trip system. Key components include two heavy-duty extension spring assemblies with six total springs, a heavy-duty tubular table A-frame assembly, two 4x12 reversing cylinders, five table-to-moldboard hook-up points, a level raise lift system with lift chains for high country operations, and a swivel bar with push ears set 30.5 inches on center. The moldboard features a 3/4-inch bottom angle weldment and includes a 3/8-inch by 12-inch rubber flap kit. The plow has an extended front push beam approximately 144 inches long with an installed plow stand and must be compatible with a 60,000 GVW dual rear axle dump truck equipped with a wing plow. Delivery is required to Grand Teton National Park, Moose Warehouse, 103 Headquarters Loop, Moose, Wyoming 83012, attention Clinton Vaughan.