Attachment 1 Salient Characteristics Fulcrum Bench Press.pdf
PDF 112 KB Posted
- Attached to
- Fulcrum Bench Press Machine
- Solicitation number
- 70LGLY26QGLB00053
About this file
This is a Salient Characteristics specification document for a Selectorized Fulcrum Bench Press equipment procurement under federal contract 70LGLY26QGLB00053.
The specification establishes detailed requirements for a single fulcrum pivot-point weight machine designed to simulate traditional barbell bench press motion. Key design and construction requirements include: 3" x 3" 11- or 7-gauge American steel for primary structural components; 1" cold rolled steel bolts for assembly; stainless steel adjustable parts with laser-numbered adjustment points; and a lifetime structural warranty on all welds and frame components. The resistance system must utilize a selectorized weight stack with 1" solid round guide rods and industrial plating, with minimum resistance not exceeding 45 pounds and maximum resistance of at least 410 pounds, clearly labeled in pound increments with plastic sleeves for smooth operation. Upholstery specifications include a 3/4" plywood bench pad with 1" rebond foam, 1/4" closed-cell foam top layer with double-stitched seams, and 1" super dense closed cell neoprene padding. The machine shall measure approximately 104 inches long by 38.25 inches wide by 67 inches high, weighing approximately 932 pounds, with floor anchors or stabilizers to prevent movement. All steel surfaces require hybrid texture powder coating finish. Safety features must include stops or limiters to prevent arms from moving below bench height, shielded or enclosed moving parts, and accessibility for users ranging from 5'0" to 6'8" in height. The vendor must deliver the machine fully assembled or with on-site assembly, provide installation and setup within 30 days of delivery, and remove all packing materials. The equipment includes a lifetime structural warranty on the frame and minimum one-year warranty on moving parts and upholstery, with customization options available upon request.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis and Solicitation_70LGLY26QGLB00053.pdf | ||
| Attachment 2 Provision_Clause.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
70LGLY26QGLB00053
Attachment 1: Salient Characteristics Selectorized Fulcrum Bench Press
1. Product Guidelines
1. Design & Construction:
i. The machine shall utilize a single fulcrum (pivot point) design, ensuring both arms move together in a fixed arc, closely simulating the motion of a traditional barbell bench press.
ii. The bench shall be fixed and aligned with the pressing arms to ensure proper user positioning.
iii. The pressing arms shall include ergonomic handles with non-slip grips.
iv. The machine shall be constructed using 3” x 3” 11- or 7-gauge American steel for all primary structural components.
v. The frame shall be assembled using 1" cold rolled steel bolts for maximum rigidity and durability.
vi. All welds and frame components shall be covered by a lifetime structural warranty.
vii. All adjustable parts shall use stainless steel.
viii. All adjustment points are laser-numbered for easy and repeatable setup.
2. Resistance System
i. The machine shall use a selectorized weight stack system with 1" solid round guide rods and industrial plating.
ii. The increment size will be specified by manufacturer based on standard product design and safety/engineering constraints.
iii. The minimum resistance shall not exceed 45 pounds.
iv. The maximum resistance shall be at least 410 pounds.
v. The weight stack shall be clearly labeled in pounds at each increment.
vi. The weight selection pin shall be secure and easy to use.
vii. Weight stack plates will utilize plastic sleeves for smooth operation.
3. Upholstery & Padding
i. Bench pad shall be constructed of 3/4" plywood with 1" rebond foam and a 1/4" closed-cell foam top layer with double-stitched seams.
ii. Padding shall be 1" super dense closed cell neoprene for durability and comfort.
4. Dimensions & Stability
i. The machine shall have approximate dimensions of:
1. Length: 104 inches
2. Width: 38.25 inches
3. Height: 67 inches
4. Weight: Approximately 932 lbs.
ii. The machine shall include floor anchors or stabilizers to prevent movement during use.
5. Finish
i. All steel surfaces shall have a hybrid texture powder coating for increased durability.
6. Safety & Accessibility
70LGLY26QGLB00053
i. The machine shall include safety stops or limiters to prevent the pressing arms from moving below bench height.
ii. All moving parts shall be shielded or enclosed to prevent accidental contact.
iii. The machine shall be accessible to users ranging from 5’0” to 6’8” in height.
7. Customization
i. Custom colors and custom designs shall be available upon request.
8. Quality and Warranty
i. The machine shall include a lifetime structural warranty on all steel frame components and welds.
ii. The machine shall be warranted for a minimum of 1 year for moving parts and upholstery.
iii. The machine shall be free from defects in materials and workmanship.
9. Delivery and Installation
i. The machine shall be delivered fully assembled or with on-site assembly included.
ii. The vendor shall provide installation and setup within 30 days of delivery.
iii. The vendor shall remove all packing materials from the site.
File details come from the government source that posted it. Updated .