attachment_1_RFB DNCR CAP-2428.pdf

BROOKSIDE LEARNING CENTER AT CANNON MOUNTAIN SKI AREA

FRANCONIA NOTCH STATE PARK FRANCONIA, NH

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

AutoCAD SHX Text

STATE OF NEW HAMPSHIRE

AutoCAD SHX Text

DEPARTMENT OF NATURAL AND CULTURAL RESOURCES

AutoCAD SHX Text

ROOF REPLACEMENT

AutoCAD SHX Text

BROOKSIDE LEARNING CENTER

AutoCAD SHX Text

CAPITAL PROJECTS & MAINTENANCE

AutoCAD SHX Text

OF

AutoCAD SHX Text

AutoCAD SHX Text

FRANCONIA, NEW HAMPSHIRE

AutoCAD SHX Text

CANNON MTN. STATE SKI AREA

AutoCAD SHX Text

EDWARD MUSSEY

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text 1/8" = 1'-0"

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FEB 3, 2025

AutoCAD SHX Text

PROJECT #

AutoCAD SHX Text

CAP-2428

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

ASPHALT SHINGLE UNDERLAYMENT ENTIRE ROOF DECK

AutoCAD SHX Text

ALUMINUM DRIP EDGE 6" DECK FLANGE 2" FASCIA AND 3/4" DRIP. "WHITE"

AutoCAD SHX Text

HI-TEMP ICE & WATERSHIELD ENTIRE ROOF DECK

AutoCAD SHX Text

2"X6" WOOD TRUSS TAILS (EXISTING)

AutoCAD SHX Text

58" PLYWOOD SHEATHING (EXISTING) REPLACE PER ALLOWANCES

AutoCAD SHX Text

1"X8" T&G EXPOSED WOOD DECKING SPANNING BETWEEN TRUSS TAILS (EXISTING)

AutoCAD SHX Text

EXPOSED 2"X10" WOOD TRUSS TAILS @ 4'-0" O.C. (EXISTING)

AutoCAD SHX Text

1"X8" WOOD FASCIA BOARD (REPLACE AS REQUIRED)

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

INSPECT THE EXISTING MEMBRANE ROOFING TO REMAIN

AutoCAD SHX Text

ROOF DRAIN

AutoCAD SHX Text

ROOF DRAIN

AutoCAD SHX Text REMOVE EXISTING ASPHALT SHINGLE ROOFING INSTALL HIGHT TEMP ICE & WATERSHIELD AND ROOF UNDERLAYMENT ON ENTIRE ROOF DECK AND ASPHALT SHINGLE ROOFING.

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

CONSTRUCT CRICKET WITH 20 OZ ZINC COATED COPPER. VERIFY SIZE REQUIRED

AutoCAD SHX Text NOTES: 1. STRIP AND REMOVE ASPHALT STRIP AND REMOVE ASPHALT SHINGLE ROOFING SYSTEM. 2. REPLACE ANY DETERIORATED REPLACE ANY DETERIORATED SHEATHING. 3. REPLACE DETERIORATED FASCIA REPLACE DETERIORATED FASCIA AND FACSIA TRIM BOARDS. 4. INSTALL ICE & WATERHIELD INSTALL ICE & WATERHIELD UNDERLAYMENT PER ASPHALT SHINGLE MANUFACTUER'S REQUIREMENTS ON ENTIRE ROOF DECK SURFACE. 5. INSTALL ADDITIONAL 3' WIDE INSTALL ADDITIONAL 3' WIDE STRIPS OF ICE & WATERSHIELD IN ALL VALLEYS AND AROUND ALL ROOF PENETRATIONS. 6. INSTALL ASPHALT SHINGLES INSTALL ASPHALT SHINGLES ROOFING. 7. REPLACE AREAS OF T1-11 SIDING REPLACE AREAS OF T1-11 SIDING PER ALLOWANCES.

AutoCAD SHX Text

CANNON MOUNTAIN SKI RESORT BROOKSIDE LEARNING CENTER

AutoCAD SHX Text 1 1

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

EAVE DETAIL (TYPICAL)

AutoCAD SHX Text 2 1

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

3/4" EXTERIOR GRADE T1-11 (EXISTING)

AutoCAD SHX Text

REPLACE DETERIORATED 3/4" EXTERIOR GRADE PLYWOOD SHEATHING PER ALLOWANCES

AutoCAD SHX Text 2'

AutoCAD SHX Text 3 1/2"

AutoCAD SHX Text 1'

AutoCAD SHX Text

1"X8" WD TRIM BOARD

AutoCAD SHX Text 4"

AutoCAD SHX Text

HI-TEMP ICE & WATERSHIELD

AutoCAD SHX Text

EXISTING 5/8" PLWOOD SHEATHING

AutoCAD SHX Text

1" X 8" EXPOSED WOOD DECKING

AutoCAD SHX Text

2"X6" LADDER FRAME

AutoCAD SHX Text

1"X10" TRIM BOARD

AutoCAD SHX Text

EXPOSED DOUBLE 2"X10" LOOKOUTS

AutoCAD SHX Text

34" T1-11 EXTERIOR GRADE PLYWOOD

AutoCAD SHX Text

PLYWOOD SHEATHING

AutoCAD SHX Text

2"X4" END WALL 16" O.C.

AutoCAD SHX Text

END TRUSS

AutoCAD SHX Text

ROOF RAKE DETAIL (TYPICAL)

AutoCAD SHX Text 3 1

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

CUSTOM FABRICATE END CAPS FOR EXPOSED WOOD TRUSS TAILS

AutoCAD SHX Text

EXPOSED 2"X10" TRUSS TAILS

AutoCAD SHX Text

EXPOSED DOUBLE 2"X10" TRUSS TAILS 4' O.C.

AutoCAD SHX Text

EXPOSED DOUBLE 2"X10" TRUSS TAILS 4' O.C.

AutoCAD SHX Text

EXPOSED 2"X10" TRUSS TAILS

AutoCAD SHX Text

EXPOSED DOUBLE 2"X10" TRUSS TAILS 4' O.C

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

REPLACE MISSING EXPOSED DOUBLE 2"X10" TRUSS TAIL.

AutoCAD SHX Text COBRA SNOW COUNTRY ADVANCED 11.5" RIDGE VENT WITH TIMBERTEX 12" RIDGE CAP SHINGLES

AutoCAD SHX Text

USE NON-VENTING RIDGE CAP WITHIN 6 FEET OF THIS CORNER

AutoCAD SHX Text

TIMBERTEX RIDGE CAP SHINGLES

AutoCAD SHX Text 4:12

AutoCAD SHX Text

WARNING! HIGH WIND AREA PROJECT SITE ELEVATION IS 2,045 + FEET

AutoCAD SHX Text 4 1

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

REPLACE DETERIORATED T1-11 SIDING PER ALLOWANCES

AutoCAD SHX Text

REPLACE T1-11 SIDING PER ALLOWANCE PAINT TO MATCH EXISTING

AutoCAD SHX Text NOTE: ALL DIMENSIONS SHOWN ARE APPROXIMATE. CONTRACTOR SHALL VERIFY ALL REQUIRED MEASUREMENTS BEFORE ORDERING MATERIALS.

AutoCAD SHX Text

ASPHALT SHINGLE ENTIRE ROOF DECK

AutoCAD SHX Text

HI-TEMP ICE & WATERSHIELD

AutoCAD SHX Text

ALUMINUM DRIP EDGE 6" DECK FLANGE 2" FASCIA AND 1" DRIP. "WHITE"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text NOTES: 1. REGARDLESS OF MEMBRANE EXPOSURE REGARDLESS OF MEMBRANE EXPOSURE EXTEND MEMBRANE UNDER FIRST 3 COURSES OF ASPHALT SHINGLES.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

EXISTING SUBSTRATE

AutoCAD SHX Text

EPDM ROOF MEMBRANE EXTENDED UNDER THE SHINGLE COURSES

AutoCAD SHX Text

AutoCAD SHX Text

EPDM MANUFACTUER'S BONDING ADHESIVE

AutoCAD SHX Text 6" (15cm) WIDE PRESSURE- SENSITIVE RUSS AND EPDM PRIMER

AutoCAD SHX Text FASTENER & SEAM PLATE, MAX. 12" (30cm) O.C.

AutoCAD SHX Text

ASPHALT SHINGLES

AutoCAD SHX Text UNDERLAYMENT TO BE ABOVE EXISTING MEMBRANE IN SHINGLE-FASHION, OVERLAP MIN. 6" (15cm)

AutoCAD SHX Text

EPDM TO SHINGLE TRANSITION

AutoCAD SHX Text 4 1

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text COBRA SNOW COUNTRY ADVANCED 11.5" RIDGE VENT WITH TIMBERTEX 12" RIDGE CAP SHINGLES

AutoCAD SHX Text

GAF TIMBERTEX 12" RIDGE CAP SHINGLES

AutoCAD SHX Text

GAF 12" TIMBERTEX RIDGE CAP SHINGLES

AutoCAD SHX Text NOTES: 1. LEAK BARRIER'S SHALL BE APPLIED IN FAIR LEAK BARRIER'S SHALL BE APPLIED IN FAIR WEATHER WHEN THE AIR, ROOF DECK, AND MEMBRANE ARE AT TEMPERATURES OF 40 F OR HIGHER. ROOF COVERING MATERIAL SHALL BE APPLIED AT TEMPERATURES OF 40 F OR HIGHER.

AutoCAD SHX Text

LINE OF BUILDING BELOW

AutoCAD SHX Text 4 1

AutoCAD SHX Text 3 1

NOTCH VIEW LODGE (OLD PEABODY LODGE) AT CANNON MOUNTAIN SKI AREA

FRANCONIA NOTCH STATE PARK FRANCONIA, NH

AutoCAD SHX Text

GUTTER OVER ENTRANCE TO REMAIN

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

6:12 SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

5:12 SLOPE

AutoCAD SHX Text

3:12 SLOPE

AutoCAD SHX Text

3:12 SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

STONE MASONRY CHIMNEY

AutoCAD SHX Text

REMOVE VENT AND PLYWOOD OVER EXISTING HOLE.

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

REMOVE TURBINE VENTILATOR AND PLYWOOD OVER HOLE

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

PLUMBING VENT

AutoCAD SHX Text

REMOVE TURBINE VENTILATOR AND PLYWOOD OVER HOLE

AutoCAD SHX Text

REMOVE TURBINE VENTILATOR AND PLYWOOD OVER HOLE

AutoCAD SHX Text

REMOVE LOWER ASPHALT SHINGLES AND REPLACE WITH NEW ASPHALT SHINGLES.

AutoCAD SHX Text

ANTENNA AND DISH ARE NOT TO BE DISTURBED.

AutoCAD SHX Text

KITCHEN VENTILATOR BELOW ROOF LINE

AutoCAD SHX Text

MOUNTS ON FACIA ARE TO REMAIN

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

VENTILATOR

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

6:12 SLOPE

AutoCAD SHX Text

4:12 SLOPE

AutoCAD SHX Text

LOWER ROOF

AutoCAD SHX Text

LOWER ROOF

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

6:12 SLOPE

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text

VALLEY

AutoCAD SHX Text 2 4

AutoCAD SHX Text

REPLACE MISSING CEDAR SHAKE SIDING MATCH EXISTING AND PAINT TO MATCH.

AutoCAD SHX Text NOTE: ALL DIMENSIONS SHOWN ARE APPROXIMATE. CONTRACTOR SHALL VERIFY ALL REQUIRED MEASUREMENTS BEFORE ORDERING MATERIALS.

AutoCAD SHX Text

WARNING! HIGH WIND AREA PROJECT SITE ELEVATION IS 2,045 + FEET

AutoCAD SHX Text

CANNON MOUNTAIN NOTCHVIEW LODGE (OLD PEABODY LODGE)

AutoCAD SHX Text 1 2

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

CANNON MOUNTAIN NOTCHVIEW LODGE (OLD PEABODY LODGE) CHIMNEY

AutoCAD SHX Text 2 2

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text

REPOINT CHIMNEY

AutoCAD SHX Text

INSPECT CHIMNEY CAP AND RECONSTRUCT IF REQUIRED BY PROJECT MANAGER

AutoCAD SHX Text REPLACE DETERIORATED 1"X8" FASCIA TRIM AND 1"X12 FASCIA BOARDS AT EAVES PER ALLOWANCES.

AutoCAD SHX Text

REPOINT CHIMNEY FROM THE LOWER MASONRY BLOCK FOUNDATION TO THE TOP

AutoCAD SHX Text

REPLACE FASCIA TRIM AND FASCIA

AutoCAD SHX Text

REPLACE FASCIA TRIM AND FASCIA

AutoCAD SHX Text COBRA SNOW COUNTRY ADVANCED 11.5" RIDGE VENT WITH 12" TIMBERTEX RIDGE CAP SHINGLES

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text 2 2

AutoCAD SHX Text

RIDGE CAP

AutoCAD SHX Text REPLACE DETERIORATED 1"X8" FASCIA TRIM AND 1"X12 FASCIA BOARDS AT EAVES PER ALLOWANCES.

AutoCAD SHX Text

CONSTRUCT 20 OZ. COPPER CRICKET WITH 2"X6" SUPPORT FRAMING

AutoCAD SHX Text

REPLACE DETERIORATED 1"X8" FASCIA BOARD PER ALLOWANCES.

AutoCAD SHX Text

ROOF PITCH CHANGE

AutoCAD SHX Text

6:12 SLOPE

AutoCAD SHX Text

SLIGHT VALLEY

AutoCAD SHX Text

SLIGHT VALLEY

AutoCAD SHX Text

6:12 SLOPE

AutoCAD SHX Text REPLACE MISSING CEDAR SHINGLE SIDING ON LOWER SIDEWALLS PRE-PAINTED TO MATCH EXISTING

AutoCAD SHX Text

REPLACE VENT PIPE BOOTS

AutoCAD SHX Text

REPLACE VENT PIPE BOOTS

AutoCAD SHX Text 5 2

AutoCAD SHX Text

DECK AREA

AutoCAD SHX Text COBRA SNOW COUNTRY ADVANCED 11.5" RIDGE VENT WITH 12" TIMBERTEX RIDGE CAP SHINGLES

AutoCAD SHX Text COBRA SNOW COUNTRY ADVANCED 11.5" RIDGE VENT WITH 12" TIMBERTEX RIDGE CAP SHINGLES

AutoCAD SHX Text NOTES: 1. STRIP AND REMOVE ASPHALT SHINGLE STRIP AND REMOVE ASPHALT SHINGLE ROOFING SYSTEM. 2. REPLACE ANY DETERIORATED SHEATHING. REPLACE ANY DETERIORATED SHEATHING. 3. REPLACE DETERIORATED FASCIA AND REPLACE DETERIORATED FASCIA AND FACSIA TRIM BOARDS. 4. INSTALL HI-TEMP ICE & WATERSHIELD INSTALL HI-TEMP ICE & WATERSHIELD AND ROOF UNDERLAYMENT PER ASPHALT SHINGLE MANUFACTUER'S REQUIREMENTS ON ENTIRE ROOF DECK SURFACE. 5. INSTALL ADDITIONAL 3' WIDE STRIPS OF INSTALL ADDITIONAL 3' WIDE STRIPS OF HI-TEMP ICE & WATERSHIELD UNDERLAYMENT IN ALL VALLEYS AND AROUND ALL ROOF PENETRATIONS. 6. INSTALL ASPHALT SHINGLES. INSTALL ASPHALT SHINGLES. 7. REPOINT STONE MASONRY CHIMNEY REPOINT STONE MASONRY CHIMNEY FROM THE MASONRY BLOCK FOUNDATION TO THE CHIMNEY CAP. INSPECT CHIMNEY CAP & REPAIR AS NECESSARY. 8. INSTALL FRAMING & SHEATHING FOR INSTALL FRAMING & SHEATHING FOR THE CRICKET. 9. INSTALL COPPER CHIMNEY CRICKET AND INSTALL COPPER CHIMNEY CRICKET AND NEW LEAD COUNTER FLASHING.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

20 OZ. COPPER CRICKET

AutoCAD SHX Text

3/4" PLYWOOD OVER 2"X4" FRAMING

AutoCAD SHX Text

2"X6" FRAMING FOR CRICKET

AutoCAD SHX Text

EXISTING ROOF DECK

AutoCAD SHX Text

HT ICE & WATERSHIELD OVER " PLYWOOD34" PLYWOOD

AutoCAD SHX Text

STONE MASONRY CHIMNEY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

2"X4" FRAMING

AutoCAD SHX Text

EXISTING ROOF DECK

AutoCAD SHX Text

EXISTING ROOF FRAMING

AutoCAD SHX Text

HT ICE & WATERSHIELD ENTIRE ROOF DECK

AutoCAD SHX Text

PEAK OF 3/4" PLYWOOD SHEATHING OVER 2"X4" FRAMING

AutoCAD SHX Text

2"X6" FRAMING FOR CRICKET

AutoCAD SHX Text

20 OZ. COPPER CRICKET

AutoCAD SHX Text

18" DECK FLANGE MATCH ROOF PITCH

AutoCAD SHX Text

ALL SEAMS ARE TO BE SOLDERED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

20 OZ. COPPER CRICKET

AutoCAD SHX Text

18" DECK FLANGE TO EXTEND AT LEAST 12" BEYOND FACE OF CHIMNEY

AutoCAD SHX Text

CRICKET FRAMING DETAIL

AutoCAD SHX Text 3 2

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

COPPER CRICKET DETAIL

AutoCAD SHX Text 4 2

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

STONE MASONRY CHIMNEY

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

ELEVATION VIEW

AutoCAD SHX Text

INSTALL NEW LEAD COUNTER FLASHING TO FLASH IN THE NEW CRICKET

AutoCAD SHX Text

SLOPE SHALL MATCH ROOF PITCH ADJUST CRICKET HEIGHT AS NECESSARY

AutoCAD SHX Text

INSPECT AND REPAIR CHIMNEY CAP

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

HIGH EAVE CAP FLASHING MATCH EXISTING PROFILE

AutoCAD SHX Text SHINGLE FIXED OVER CAP FLASHING WITH BLACKJACK ROOF CEMENT AS PER MANUFACTURE'S SPECS.

AutoCAD SHX Text

ROOFING UNDERLAYMENT

AutoCAD SHX Text

ICE & WATERSHIELD ENTIRE ROOF DECK

AutoCAD SHX Text

1.5" ROOFING NAIL

AutoCAD SHX Text

3" ROOFING NAIL

AutoCAD SHX Text

HIGH EAVE FLASHING DETAIL

AutoCAD SHX Text 5 2

AutoCAD SHX Text

SCALE: 1/2" = 1'-0"

AutoCAD SHX Text

1"X 6" BLOCKING BETWEEN TRUSSES

AutoCAD SHX Text

EXISTING SIDING T1-11 OR WOOD SHAKES

AutoCAD SHX Text

CARRY ICE & WATERSHIELD OVER FASCIA

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

AutoCAD SHX Text

STATE OF NEW HAMPSHIRE

AutoCAD SHX Text

DEPARTMENT OF NATURAL AND CULTURAL RESOURCES

AutoCAD SHX Text

ROOF RELACEMENT

AutoCAD SHX Text

CAN08 NOTCHVIEW LODGE

AutoCAD SHX Text

CAPITAL PROJECTS & MAINTENANCE

AutoCAD SHX Text

OF

AutoCAD SHX Text

AutoCAD SHX Text

FRANCONIA, NEW HAMPSHIRE

AutoCAD SHX Text

CANNON MOUNTAIN SKI AREA

AutoCAD SHX Text

EDWARD MUSSEY

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text 1/8" = 1'-0"

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FEB 3, 2025

AutoCAD SHX Text

PROJECT #

CAP-2428

8"

NAIL APPROXIMATELY 11

2"- 3"

(38 - 76MM) ABOVE THE BUTT

EDGE OF THE SHINGLE AND

APPROXIMATELY 1" - 2" (25 -

51MM) AND 10" - 12" (254 -

305MM) IN FROM OF EACH SIDE

OVERLAP EAVE EDGE STARTER

STRIP AT LEAST 3" (76MM)

FOR MAXIMUM WIND

RESISTANCE ALONG RAKES,

INSTALL GAF STARTER STRIP

SHINGLES AND CEMENT

SHINGLES TO UNDERLAYMENT

AND EACH OTHER IN A 4" (102

MM) WIDTH OF ASPHALT

PLASTIC CEMENT.

TM

TRIM 5" (127MM) FROM END OF FIRST

SHINGLE

START AT EITHER RAKE AND LAY IN EITHER DIRECTION

PLACE STARTER SHINGLE 14"

-3 4" (6 - 19MM) OVER EAVES

AND RAKE EDGES TO

PROVIDE DRIP EDGE.

5"

(127mm)

ALUMINUM DRIP EDGE "WHITE".

6" DECK FLANGE WITH 2"

FASCIA AND 34" DRIP.

ALONG

RAKE, PUT

NON-CORROSIVE

METAL DRIP

EDGE

ON TOP OF

SHINGLE-MATE

ROOF DECK

PROTECTION.

SHINGLE-MATE

ROOF DECK

PROTECTION

R

ALONG EAVES, PUT

SHINGLE-MATE ROOF DECK

PROTECTION ON TOP OF

NON-CORROSIVE METAL

DRIP EDGE.

6' min.

(1.83M)

4" END LAP

(102MM)

2" SIDE LAP

(52MM)

R

R

BETWEEN END

LAPS

*USE ICE & WATERSHIELD, WEATHER WATCH ,

STORMGUARD OR OTHER GAF LEAK BARRIER

ON ENTIRE ROOF DECK AS REQUIRED

R

R

12"

36" (914mm)

(305mm)

Perforations

9" (229mm)

12" (305mm)

Sealant

9" (229 mm)

12" (305 mm)

1" (25 mm)

1" (25 mm)

11.5" (292 mm)

Nail

FOR COLD WEATHER APPLICATION

· IN COLD WEATHER, WARM TIMBERTEX® RIDGE CAP SHINGLES

BEFORE BENDING.

· WHEN SELF-SEALING MAY BE DELAYED DUE TO COLD

WEATHER, APPLY QUARTER-SIZED DABS OF ASPHALT

PLASTIC CEMENT (MUST CONFORM TO ASTM D4586 TYPE I OR

TYPE II) BETWEEN RIDGE CAP PIECES AND PRESS FIRMLY TO

INSURE GOOD CONTACT BETWEEN PIECES.

FOR MAXIMUM WIND SPEED COVERAGE UNDER LTD. WARRANTY

· APPLY A 1/4” (6 MM) WIDE BEAD OF HENKEL PL® URETHANE

SEALANT OR SONNEBORN® NP-1™ URETHANE SEALANT TO

EACH RIDGE CAP SHINGLE 3/4”-1” (19MM - 25MM) FROM THE

SHINGLE EDGE, SET PARALLEL TO THE RIDGE (SEE FIGURE 3).

NOTE: EXCESSIVE APPLICATION OF TAB ADHESIVE CAN CAUSE

BLISTERING OF RIDGE CAP SHINGLE.

AutoCAD SHX Text (203mm)

AutoCAD SHX Text

EXPOSURE

AutoCAD SHX Text

NAIL 9" (229MM) FROM BOTTOM AND 1" (25MM) FROM EDGE

AutoCAD SHX Text

SELF-SEAL ADHESIVE ON BACK

AutoCAD SHX Text

BOTTOM BACKER

AutoCAD SHX Text

STARTER COURSE

AutoCAD SHX Text

TOP STRIP

AutoCAD SHX Text

TIMBERTEX INSTALLATION DETAIL

AutoCAD SHX Text 4 3

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text

GAF SHINGLE-MATE UNDERLAYMENT OVER ICE & WATERSHIELD ENTIRE ROOF DECK

AutoCAD SHX Text

PRO-START INSTALLATION

AutoCAD SHX Text 2 3

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

AutoCAD SHX Text

STATE OF NEW HAMPSHIRE

AutoCAD SHX Text

DEPARTMENT OF NATURAL AND CULTURAL RESOURCES

AutoCAD SHX Text

DESIG DEVELOPMENT & MAINTENANCE

AutoCAD SHX Text

OF

AutoCAD SHX Text

AutoCAD SHX Text

EDWARD MUSSEY

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text 1/4" = 1'-0"

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FEB 3, 2025

AutoCAD SHX Text

PROJECT #

AutoCAD SHX Text

CAP-2428

AutoCAD SHX Text

ROOF REPLACEMENT

AutoCAD SHX Text

BROOKSIDE LEARNING CENTER AND NOTCH VIEW LODGE

AutoCAD SHX Text

FRANCONIA, NEW HAMPSHIRE

AutoCAD SHX Text

CANNON MTN. SKI AREA

AutoCAD SHX Text NOTES: 1. STRIP AND DISPOSE STRIP AND DISPOSE ALL ASPHALT SHINGLE ROOFING AND DRIP EDGE. 2. INSTALL ICE & INSTALL ICE & WATERSHIELD ON ENTIRE ROOF DECK & ALONG EAVES, RAKES AND VALLEYS. 3. INSTALL DRIPEDGE. INSTALL DRIPEDGE. 4. INSTALL ASPHALT INSTALL ASPHALT SHINGLES. 5. PROVIDE INSTALLERS & PROVIDE INSTALLERS & SHINGLE MANUFACTURER WARRANTIES.

AutoCAD SHX Text

SHINGLE-MATE INSTALLATION DETAIL 4:12 OR MORE

AutoCAD SHX Text 1 3

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text NOTES: 1. LEAK BARRIER'S SHALL BE APPLIED IN FAIR LEAK BARRIER'S SHALL BE APPLIED IN FAIR WEATHER WHEN THE AIR, ROOF DECK, AND MEMBRANE ARE AT TEMPERATURES OF 40 F OR HIGHER. ROOF COVERING MATERIAL SHALL BE APPLIED AT TEMPERATURES OF 40 F OR HIGHER.

AutoCAD SHX Text

GAF TIMBERTEX RIDGE CAP 12" IN "CHARCOAL"

AutoCAD SHX Text

COBRA SNOW COUNTRY ADVANCED RIDGE VENT 11.5" (292 MM)

AutoCAD SHX Text

GAF UHDZ SHINGLES IN "CHARCOAL"

AutoCAD SHX Text

GAF SHINGLEMATE

AutoCAD SHX Text

ICE & WATERSHIELD ENTIRE ROOF DECK

AutoCAD SHX Text

EXISTING 5/8" PLYWOOD DECKING

AutoCAD SHX Text

EXISTING TRUSS

AutoCAD SHX Text

RIDGE VENT DETAIL (TYPICAL)

AutoCAD SHX Text 3 3

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text NOTE: USE SUPPLIED 3" (76 MM) CORROSION RESISTANT RING SHANK NAILS INCLUDED WITH THE RIDGE VENT.

AutoCAD SHX Text

USE ONE PIECE COPPER STEP

FLASHING FOR EACH SHINGLE

COURSE. PLACE STEP FLASHING

OVER THE SHINGLE AND NAIL

EACH STEP FLASHING PIECE TO

THE ROOF DECK WITH 2 COPPER

NAILS. SEAL THE OVERLYING

ASPHALT SHINGLES TO THE STEP

FLASHING WITH ASPHALT PLASTIC

CEMENT.

EXTEND LEAD COUNTER FLASHING

OVER BASE FLASHING. STONE MASONRY CHIMNEY RE-POINT

THE STONE MASONRY CHIMNEY FROM

THE LOWER CONCRETE BLOCK

FOUNDATION UP TO THE CHIMNEY

CAP.

FIRST COURSE

SECOND COURSE

17"

(432mm)

THIRD COURSE

6"

(152mm)11"

(279mm)

FOURTH COURSE

FIFTH COURSE

UNDERLAYMENT

FOURTH COURSE:

THIRD COURSE:

SECOND COURSE:

FIRST COURSE:

PLACE FIRST COURSE OF SHINGLES 1/4"

- 3/4" OVER EAVE AND RAKE EDGES,

COVERING STARTER COURSE

OVERHANG, TO PROVIDE DRIP EDGE.

SHINGLE

INSTALLATION

REMAINING

COURSES:

NOTES:

DRIP EDGE HEM CORNERS

ALUMINUM DRIP EDGE APPLIED DIRECT TO

THE ROOF DECK AT EAVES

DO NOT SAW CUT STONES FOR THE

LEAD COUNTER FLASHING

INSTALLATION. REUSE THE EXISTING

COUNTER FLASHING LOCATIONS ON

THE SIDES OF THE CHIMNEY.

EXTEND COPPER FLASHING AND

LEAD COUNTER FLASHING AT

LEAST 2" BEYOND EVE.

ICE & WATERSHIELD

ENTIRE ROOF DECK

NOTE: DO NOT RUN ICE AND

WATERSHIELD OR OTHER

UNDERLAYMENTS UP THE FACE,

SIDEWALLS, OR BACK OF THE

CHIMNEYS'

ALUMINUM DRIP EDGE APPLIED OVER ICE

AND WATERSHIELD AT RAKES

13-1/4" (368 - 445mm)

39-3/8" (1m)

ENHANCED NAILING PATTERN - SIX NAILS PER SHINGLE*

* REQUIRED BY SOME LOCAL CODES AND REQUIRED FOR ENHANCED WIND COVERAGE ON

CERTAIN PRODUCTS.

SEE LIMITED WARRANTY FOR DETAILS.

5-3/4" - 6-1/4"

(146MM - 159MM)

FROM BOTTOM OF

SHINGLE(13 - 64mm)

1/2" - 2-1/2"

(165 - 241mm) 6-1/2" - 9-1/2"

14-1/2" - 17-1/2"

(165 - 241mm) 6-1/2" - 9-1/2"

(368 - 445mm) 14-1/2" - 17-1/2"

Cement locations (4 quarter-sized dabs of cement on back of shingle)

6" (152 mm)

6" (152 mm)

CARRY GAF

UNDERLAYMENT AT LEAST

6" (152MM) OVER GAF LEAK

BARRIER.

CENTER FULL WIDTH ROLL

OF GAF LEAK BARRIER.

DO NOT PLACE FASTENERS

WITHIN 6" (152MM) OF

CENTER LINE. HORIZONTAL

LAPS MUST BE AT LEAST 6"

(152MM).

EXTEND END OF SHINGLE AT

LEAST 12" (305MM)

BEYOND VALLEY CENTER LINE.

NAIL, PUTTING EXTRA

FASTENER IN TOP CORNER OF

SHINGLE.

EXTEND STARTER STRIP

ACROSS VALLEY

AT LEAST 12" (305MM) AND

WEAVE WITH

OPPOSITE SIDE STARTER

STRIP SHINGLE.

OVERLYING SHINGLES MUST BE

CUT SO THEY ARE 2" (52MM) AWAY

FROM VALLEY CENTER LINE. CLIP

SHINGLE CORNERS 45° TO KEEP

WATER FLOW IN THE VALLEY

CENTER. SEAL THE VALLEY

SHINGLES TO EACH OTHER USING

ASPHALT PLASTIC CEMENT.

SEAL SHINGLES TO

COPPER FLANGE

WITH ASPHALT

PLASTIC CEMENT.

CRICKET RIDGE

SHOULD BE AT LEAST

36"

CRICKET FLANGE

SHOULD BE AT LEAST

18" UP ROOF DECK.

CRICKETS SHOULD

EXTEND AT LEAST

6" UP THE BACK OF

THE CHIMNEY AND

EXTEND AT LEAST

18" UP THE ROOF

DECK.

2 NAILS PER STEP

FLASHING

EXTEND GAF LEAK

BARRIER AT LEAST

5"(127MM) UP WALL.

EXTEND GAF LEAK

BARRIER AT

LEAST 5"(127MM)

UP WALL

PLACE METAL

STEP FLASHING

JUST UPSLOPE

FROM EXPOSED

EDGE OF

SHINGLE AND

EXTEND 5"

(127MM) OVER

UNDERLYING

SHINGLE AND 5"

(127MM) UP THE

VERTICAL WALL.

STEP FLASHING

PIECES OVERLAP

EACH OTHER 2"

(51MM)

COVER METAL

FLASHING WITH

CUT SHINGLE. DO

NOT NAIL

SHINGLE, INSTALL

WITH ASPHALTIC

PLASTIC CEMENT.

METAL FLASHING

(NAILED TO THE

DECK, NOT TO

THE VERTICAL

WALL) EXTEND UP

WALL AT LEAST 5"

(127MM)

SIDING/CLADDING

MUST BE AT

LEAST 2" (51MM)

ABOVE THE

ROOF SURFACE

AND COVERING

FLASHING AT

LEAST 2" (51MM).

ALUMINUM DRIP EDGE AT EAVES

DO NOT NAIL SHINGLES

WITHIN 12" OF THE

OUTER EDGE OF THE

DECK FLANGE.

REPLACE ROTTED 1"X8" FASCIA TRIM BOARDS

REPLACE ROTTED 1"X12" FASCIA BOARDS

CEMENT

HAND SEALING REQUIRED: TO HAND-SEAL SHINGLES AND TO ENSURE IMMEDIATE

SEALING, APPLY 4 QUARTER-SIZED DABS OF SHINGLE TAB ADHESIVE ON THE BACK OF

THE SHINGLE 1" (25 MM) AND 13" (330 MM) IN FROM EACH SIDE AND

1" (25 MM) UP FROM BOTTOM OF THE SHINGLE. PRESS SHINGLE FIRMLY INTO THE

ADHESIVE.

CAUTION: APPLY ONLY A THIN UNIFORM LAYER OF ASPHALT PLASTIC CEMENT LESS THAN

1/8" (3 MM) THICK. EXCESS AMOUNTS CAN CAUSE BLISTERING OF THE SHINGLES AND MAY

SOFTEN THE ASPHALT IN UNDERLAYMENTS AND LEAK BARRIERS, RESULTING IN THE

ASPHALT DRIPPING AND STAINING.

STONE DETAIL

NOT SHOWN

STONE DETAIL

NOT SHOWN

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

AutoCAD SHX Text

STATE OF NEW HAMPSHIRE

AutoCAD SHX Text

DEPARTMENT OF NATURAL AND CULTURAL RESOURCES

AutoCAD SHX Text

DESIG DEVELOPMENT & MAINTENANCE

AutoCAD SHX Text

OF

AutoCAD SHX Text

AutoCAD SHX Text

EDWARD MUSSEY

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text 1/4" = 1'-0"

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FEB 3, 2025

AutoCAD SHX Text

PROJECT #

AutoCAD SHX Text

CAP-2428

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

NOTCHVIEW LODGE CHIMNEY FLASHING DETAIL

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TRIM 17" (432MM) OFF FIRST SHINGLE

AutoCAD SHX Text

TRIM 11" (279MM) OFF FIRST SHINGLE

AutoCAD SHX Text

TRIM 6" (152MM) OFF FIRST SHINGLE

AutoCAD SHX Text

START WITH FULL SHINGLE

AutoCAD SHX Text

START AT EITHER RAKE AND LAY IN EITHER DIRECTION

AutoCAD SHX Text

1. CONTINUE EACH COURSE WITH CONTINUE EACH COURSE WITH WHOLE SHINGLES.

AutoCAD SHX Text REPEAT THE 1ST - 4TH COURSE INSTRUCTIONS ON THE REMAINING COURSES, STARTING THE FIFTH COURSE WITH A FULL SHINGLE.

AutoCAD SHX Text

2. STRIKE A CHALK LINEABOUT STRIKE A CHALK LINEABOUT EVERY 6 COURSES TO CHECK PARALLEL ALIGNMENT WITH EAVES.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SHINGLE INSTALLATION DETAILS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

SELF SEAL ADHESIVE ON BACK

AutoCAD SHX Text

NAIL GUIDE LINE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

GAF ENHANCED NAILING PATTERN

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

GAF CEMENT LOCATIONS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CLOSED VALLEY DETAIL (TYPICAL)

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

ROOF REPLACEMENT

AutoCAD SHX Text

BROOKSIDE LEARNING CENTER AND NOTCH VIEW LODGE

AutoCAD SHX Text

FRANCONIA, NEW HAMPSHIRE

AutoCAD SHX Text

CANNON MTN. SKI AREA

AutoCAD SHX Text NOTES: 1. STRIP AND DISPOSE STRIP AND DISPOSE ALL ASPHALT SHINGLE ROOFING AND DRIP EDGE. 2. INSTALL ICE & INSTALL ICE & WATERSHIELD ON ENTIRE ROOF DECK & ALONG EAVES, RAKES AND VALLEYS. 3. INSTALL DRIPEDGE. INSTALL DRIPEDGE. 4. INSTALL ASPHALT INSTALL ASPHALT SHINGLES. 5. PROVIDE INSTALLERS & PROVIDE INSTALLERS & SHINGLE MANUFACTURER WARRANTIES.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

NOTCHVIEW LODGE CRICKET DETAIL

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

WALL FLASHING DETAIL (TYPICAL)

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

STONE MASONRY DETAIL INTENTIONALLY NOT SHOWN

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

HAND SEALING DETAIL

AutoCAD SHX Text

NOT TO SCALE

ENHANCED NAILING PATTERN*: NAIL SHINGLES WITH 6 NAILS APPROXIMATELY 6-7/8" (174 MM) FROM BOTTOM OF SHINGLE. IN NAILING AREAS, AS SHOWN. NAILS MUST NOT BE EXPOSED. HAND-SEAL SHINGLES.