Attachment 1 - Monitor Install SOW Updated 20 Jan 21.pdf
PDF 186 KB Posted
- Attached to
- Classroom Monitor Install Services
- Solicitation number
- FA303021Q0011
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
FOR
CLASSROOM MONITOR INSTALL
1. DESCRIPTION:
a. Scope: This statement of work is to remove old 55” Flat panel displays (FPD) and install new 65” FPD in 25 classrooms. Three new FPD are required in each classroom – two mounted in the front of the classroom and one in the rear of the room. FPD inputs will be extended to a HDMI distribution Amplifier located at the instructor desk in each classroom. Power is available at each install location, but will require an installed surge protector for each FPD.
b. Location: Louis F. Garland Fire Training Academy (Bldg. 3454 and 3453) on
Goodfellow AFB, TX.
2. SPECIFIC TASKS:
a. PRIOR TO STARTING: Contractor will contact the 312 TRS project POC 325-654-
1186 to finalize the work schedule.
b. Remove and dispose of old classroom flat panel displays and mounts.
c. Install new 65” FPD. Three flat panel display will be installed in each of 25 classrooms. Two displays in the front of the classroom and one in the rear of the classroom. HDMI cables will be extended to a HDMI distribution amplifier located at the instructor desk. HDMI cables will be install in the wall of all gypsum covered walls.
HDMI cables will be installed in raceway on all block walls. HDMI wall plates will be used in all gypsum walls, and raceway mounted boxes will be used in all block walls. A three-gang HDMI wall plate will be used at the instructor desk. Install a surge protector to each FDP.
d. Install customer provided sound bar audio attached to one of the front FPD to amplify audio output.
e. Customer provided equipment: 65” FDPs; FDP wall mounts; sound bars; surge protectors; Instructor desks; diagram of each room orientation.
f. Installer provided equipment: HDMI distribution amplifiers; HDMI Cables; HDMI wall plates, low voltage boxes; raceway, wall anchor hardware; Velcro, cable management.
Additional Information: Classrooms will be available in groups of four at a time to demo and install FPDs. Classrooms to install: Building 3453 – Rooms 134a, 134b, 136a, 136b, 138, 141, 142, 191, 195, 196, 199, 200, 213, 214, and 215. Building 3454 –
Rooms 80, 82, 85, 86, 88, 89, 90, 91, 92, and 93.
Wall construction make up is a mixture of drywall and concrete block.
Contractor is responsible to supply necessary mounting hardware for mounting to appropriate wall type.
Room layout example provided below.
File details come from the government source that posted it. Updated .