Attachment 1 - Minimum Specifications.docx
DOCX document 33 KB Posted
- Attached to
- Hydraulic Pumping Unit with Console and Installation Federal contract opportunity
- Solicitation number
- 12805B24Q0444
About this file
This document is an attachment to a federal contract opportunity solicitation for a Hydraulic Pumping Unit with a Press Console and Installation.
The solicitation is for a firm-fixed-price purchase order issued by the U.S. Department of Agriculture, Agricultural Research Service, Plains Area, located in Lubbock, Texas. The key requirements include a 500-gallon hydraulic oil reservoir, 150 gpm pumping capacity, 125 HP electric pump motor, dual variable flow piston pumps, directional control valves, manifold logic blocks, and a standalone press console with a digital touch screen and PLC controller. The unit must be fully assembled, tested, and painted prior to installation. Offerors must submit quotes by 6:30 am CT on July 25, 2024, addressing all requirements and including an active SAM.gov registration. Award will be made to the responsible offeror whose quote conforms to the specifications and is most advantageous to the Government, considering technical acceptance, past performance, and price.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions and Answers with pictures.docx | DOCX document | |
| Sol_12805B24Q0444_Amd_0002.pdf | ||
| Sol_12805B24Q0444_Amd_0001.pdf | ||
| Sol_12805B24Q0444.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 – Minimum Specifications
HYDRAULIC PUMPING UNIT
· 500-gallon hydraulic oil reservoir
· 150 gpm pumping capacity
· 125 HP electric pump motor (1800 rpm, 240/460 Volt)
· Dual variable flow piston pumps (250 cc and 71 cc). The 250 cc piston pump should have HP limiter control and thru drive.
· 3 ea. Directional Control Valves with Sandwich Flow Controls and Pressure Reducing Valves
· Manifold logic block controlling
· Charge door cylinders.
· Main ram cylinder
· Manifold logic block controlling
· Front and rear door locks
· End door locks.
· Bale door.
· Level and temperature switches (low level and high temperature switches)
· 10-micron suction strainers/filters for press ram and charge door and auxiliary functions.
· Two 5000 PSI pressure gauges.
· Oversized bale press switch
· Filtered breather cap
· Sight level gauge.
· This unit should be completely assembled, tested and painted prior to installation. Test documents will be included showing schematics drawings, flow rates, pressures and noise levels
PRESS CONSOLE:
· Stand-alone console
· Digital touch screen
· On screen software adjustable pressures and position settings
· PLC controller
· Input and output modules.
· Operational press control can be selected as either automatic or manual.
Install all equipment IAW the manufacturer’s specifications and make operational.
File details come from the government source that posted it. Updated .