Attachment 1.pdf

REQ DOC NO. - 4024V203 ATTACHMENT ____1____

CONTINUATION SHEET SOLICITATION NO. – N3904024Q0133 PAGE _1_ OF _3_

NAME OF OFFER OR/CONTRACTOR

0001 CONTAINER 2 EA

C. DESCRIPTION/SPECIFICATIONS

C.1 CONTAINER: DOT TYPE IP-1 CARBON STEEL SHIPPING CONTAINER.

C.1.1 NOMINAL DIMENSIONS; 48 IN X 48 IN X 60 IN. (L X W X H)

C.1.1.1 INSIDE DIMENSION; 40 IN X 40 IN X 59 IN (L X W X H)

MINIMUM.

C.1.2 FIXED CHANNEL 2-WAY RISERS, INTERIOR TIE DOWNS.

C.1.3 FORK LIFT LOOPS FOR LID.

C.1.4 FORKLIFT ACCESS AT BASE OF CONTAINER.

C.1.5 PAYLOAD CAPACITY 800 POUNDS MINIMUM.

C.1.6 SEE ATTACHED STATEMENT OF WORK FOR MORE

INFORMATION AND REQUIREMENTS.

C.2 FOUR (4) LIFTING PADS.

C.2.1 SEE ATTACHED STATEMENT OF WORK FOR MORE SPECIFIC

INFORMATION AND REQUIREMENTS.

C.2.2 THE ALLOWABLE STRESS FOR THE LIFTING PADS SHALL MEET

THE REQUIREMENT OF ASME BTH-1 FOR A NOMINAL DESIGN

FACTOR OF TEN (10) BASED ON YEILD.

ITEM # SUPPLIES/SERVICES QTY U/I

CONTINUATION SHEET SOLICITATION NO. – N3904024Q0133 PAGE _2_ OF _3_

C.2.3 ENSURE DOCUMENTATION CLEARLY SPECIFIES PERFORANCE

OF “PRE” AND “POST” LOAD MAGNETIC PARTICLE TESTS.

C.2.3 THE DESIGN OF THE LIFTING PAD WELDS SHALL MEET THE

INTENT OF AWS D1.1.

C.2.3.1 THE DESIGN DOCUMENTS SHALL INCLUDE THE TYPES

OF MATERIAL BEING WELDED, DESIRED WELDING PROCESS

DETAILED DRAWING, AND INTENT/ASSUMPTION OF THE

DESIGN ENGINEER.

C.2.4 SUBJECT LIFTING PADS TO A LOAD TEST FOR TEN (10)

MINUTES.

C.2.4.1 THE LOAD TEST SHALL BE 150% (TOLERANCE +5%, -0%)

OF THE RATED GROSS WEIGHT OF THE CONTAINER,

SUPPORTED BY TWO (2) OF THE LIFTING ATTACHEMENTS.

C.2.4.2 ACCEPTANCE CRITERIA: NO BENDING, CRACKING OR

PERMANENT DEFORMATION OF THE LIFTING PADS OR

ASSOCIATED STRUCTURE.

C.2.5 THE CONTRACTOR IS REQUIRED TO PROVIDE CALCULATIONS

STAMPED BY A PROFESSIONAL ENGINEEER TO VERIFY THE

LIFTING PADS WILL MEET OR EXCEEED THE LOAD TEST

CONDITIONS AND DESIGH CRITERIA SPECIFIED ABOVE.

C.2.6 PERFORM A MAGNETIC PARTICLE TEST (MT) ON ALL

ACCESIBLE SURFACES OF THE LIFTING PAD MATERIAL AND

ACCESSIBLE ASSOCIATED WELDS PER NAVSEA T9074-AS-GIB-

010/271.

C.2.6.1 ACCEPTANCE CRITERIAL OF MIL-STD-2035A, CLASS 3

FOR WELDS AND WROUGHT MATERIAL FOR BASE METAL.

C.2.6.2 THIS MAGNETIC PARTICLE INSPECTION IS THE “WELD

AND BASE METAL POST-LOAD TEST MT”

C.3 DATA REQUIREMENTS PER EXHIBIT A (DD-1423) & ATTCHMENT #1.

CONTINUATION SHEET SOLICITATION NO. – N3904024Q0133 PAGE _3_ OF _3_

C.3.1 PROFESSIONAL ENGINEER STAMP; EXHIBIT A SEQUENCE A001.

C.3.2 CERTIFICATION OF LOAD TEST; EXHIBIT A SEQUENCE A002.

C.3.3 CERTIFICATION OF PRE-LOAD TEST MT; EXHIBIT A SEQUENCE

A003.

C.3.4 CERTIFICAION OF POST-LOAD TEST MT; EXHIBIT A SEQUENCE

A004.