Attachment 1 - ARL TF 20240701.pdf
PDF 193 KB Posted
- Solicitation number
- W911QX-24-Q-0301
About this file
This document appears to be an attachment titled "ARL TF 20240701.pdf" that contains technical specifications for a 120mm aluminum sabot. The related federal contract opportunity is a pre-solicitation for the fabrication of 100 aluminum 120mm sabots, to be issued by the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground. The attachment provides detailed dimensional information and drawings for the sabot design. It specifies the starting surface, pitch diameter, pressure flanks, and other sabot characteristics. The pre-solicitation indicates the Government intends to release a solicitation for this requirement in the future, but does not provide a timeline or other specifics beyond the quantity and description of the sabot.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 - ARL TF 20240801.pdf | ||
| Drawing - 28084184_a.pdf | ||
| Salient Characteristics.doc | DOC document | |
| Synopsis (Competitive).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
[2.305] 58.55
STARTING SURFACE
22.250 565.15
0.
.5 3-
0.
Pi tc h D ia
179 x 0.125 3.175
178 x 0.072 1.84
3 2
A
3 2
CUI
L/D 32
SHEET 1 OF 1APPLICATIONCUI
USED ON
DRAWN
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
TOLERANCING PER:
MATERIAL
penetrator
FINISH
DO NOT SCALE DRAWING
ARL-TF-20240701
INTERPRET GEOMETRIC
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
B
NEXT ASSY B
A
B
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
A
4. THE "STARTING SURVACE" FOR MEASURING MAY BE ANYWHERE
WITHIN A ZONE OF +/- 0.038mm (0.0015") FROM THE ACTUAL
LOCATION OF THE FIRST 7 PRESSURE FLANK. ONCE THE STARGIN
SURFACEIS EXTABLISHED, DIMENSION TO ANY FLANK (XXX) MINUS 1
(3.175mm X {XXX-1}) WHERE XXX IS THE NUMBER OF THE PRESSURE
FLANK FROM 1 THROUGH 179. LOCATION TOLERANCE OF ANY 7
DEGREE PRESSURE FLANK IS +/-0.038mm MEASURED ON THE PITCH
DIAMETER. TOLERANCE APPLIES ONLY TO LOCATION AND NOT THE
PROFILE OF PRESSURE AND CLEARANCE FLANKS.
DETAIL A
SCALE 4 : 1
-0.13
R0.50
0.020
R0 .4
9x
R0 .4
0.
179x45° ±1°
.8
0.
-0 .1
0.
.2 6-
0.
+0.1
179X 0.004R0.10
-.0
9x
0.
8 179x
179x7° ±1°
File details come from the government source that posted it. Updated .