Statement of Work

For

Shure wireless transmitters, receivers, and accessories.

Travis AFB, CA

06 Aug 2026

Description: The USAF Band of the Golden West requires a Brand name replacement for Shure wireless transmitters, receivers, and accessories. This package will provide a necessary lifecycle update for our wireless audio systems, significantly increasing mission effectiveness.

The contractor shall provide the following: Shure Axient wireless transmitters, receivers, batteries, chargers, and accessories. (Brand name)

1. Equipment.

1.1. AD4Q-US Axient Digital Four-Channel Wireless Receiver (A: G57 470 to 636 MHz) - (Quantity: 2)

1.2 ADX2/B87A Handheld Transmitter w/ Beta 87 Capsule (G57: 470 to 616 MHz) - (Quantity: 4)

1.3. ADX1 Bodypack Transmitter with TA4M (G57: 470 to 616 MHz) - (Quantity: 4)

1.4. PSM ADTQ Quad IEM Transmitter (US) (G57: 470 to 608 MHz) - (Quantity: 1)

1.5. ADPSM-4CL 4-Channel License for- 4 channel - (Quantity: 1)

1.6. PSM ADXR Bodypack Receiver (A: 470 -636 MHz) Bodypack Receiver - (Quantity: 8)

2. Salient Characteristics.

2.1. System-Wide Requirements:

2.1.1. Must operate within an extended spectrum of UHF (470-960 MHz) with a tuning bandwidth of up to 184MHz.

2.1.2. Must support a "Standard Mode" capable of up to 17 channels in a 6 MHz TV band and a "High Density Mode" capable of 47 channels in a 6 MHz TV band.

2.1.3. System must deliver transparent audio with a flat frequency response from 20Hz to 20 kHz and a latency of 2.9 ms or less.

2.1.4. Must feature AES 256-bit encrypted signal for secure transmission.

2.1.5. Must include True Digital Diversity and interference detection.

2.1.6. Must be compatible with Wireless Workbench software for advanced RF spectrum monitoring, frequency coordination, and live performance monitoring.

2.1.7. Must be compatible with the AD610 ShowLink Access Point to provide network connectivity and remote control (frequency change, gain adjust, mute) of linked transmitters and receivers.

2.2. Line Item 1: AD4Q Receiver

2.2.1. Must be a four-channel digital receiver in a 1RU chassis.

2.2.2. Must support Quadversity™ mode for four-antenna operation.

2.2.3. Must feature a four-port, Dante-enabled interface supporting remote control, Power over Ethernet (PoE), and redundant digital audio.

2.3. Line Item 2 & 3: ADX2 Handheld and ADX1 Bodypack Transmitters

2.3.1. Must be ShowLink enabled for remote control.

2.3.2. Must provide monitoring of battery run time in hours and minutes, accurate to within 15 minutes.

2.3.3. Must feature a high-contrast OLED display.

2.3.4. ADX1 Bodypack must feature a TA4 connector.

2.4. Line Item 4 & 6: ADTQ PSM Transmitter & Bodypack Receiver

2.4.1. Must support spectrally efficient Multi-Channel Wideband (WMAS), traditional Narrowband, and ultra-low latency Analog FM transmission modes.

2.4.2. System must feature CueMode, allowing a single bodypack receiver to audition any performer's mix.

2.4.3. Receiver audio must be delivered via a locking 3.5mm TRS connector with at least 100 mW output into a 32 Ω load.

2.5. Line Item 5: ADTQ PSM License

2.5.1. Must be a perpetual license that adds four additional stereo audio channels to compatible transmitters.

2.5.2. License activation and management must be executable through the ShureCloud platform.

3. 1 Year Manufacturer Warranty (12 months) must be included.

4. All shipping, handling, must be included.

5. Delivery Date: 60 Days After Receipt of Order

6. Delivery Address: 551 Waldron St. Bldg. 240 Travis AFB, CA

7. POC after contract award: Coordinate with TSgt Katherine Salmons