Attachment 0010 Special Packaging Instructions AHX1800452 Rev C.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses.

1. PART OR DRAWING NO.

SEE NOTE *

2. CODE INDENT

99193

3. SPI NO.

AHX1800452

4. NATIONAL STOCK NO.

2835-01-180-0452

5. DATE OF DRAWING (JULIAN)

17152

6. REVISION

C

7. QUP

8. ICQ

9. UNIT PACK WT.

385.0

10. UNIT PACK CU

0030.993

11. UNIT PACK SIZE

44.0 X 34.0 X 35.8

12. MILITARY PRESERVATION

MIL-STD-2073-1, METHOD 55

18.

STEPS

19.

REQD

20.

DESCRIPTION

13. CLEANING 1 1 CONTAINER: CAGE 81996, P/N 8145PK900100-01,

NSN 8145-01-460-9393 MIL-STD-2073-1, CODE 1

14. DRYING 2 A/R DESICCANT: MIL-D-3464, 32 UNITS

MIL-STD-2073-1, CODE 1 3 1 HUMIDITY INDICATOR: P/N: 8145PK900122-01

15. PACKING

a. LEVEL A

STEP 1 IS SHIPPING CNTR

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

NOMENCLATURE: ENGINE, GAS TURBINE

LOGISTICS DATA (FOR BARE ITEM): 32.8 x 20.8 x 24.8 IN. AND WEIGHT = 140.0 LBS

* NOTE: THIS SPECIAL PACKAGING INSTRUCTION (SPI) IS USED FOR ENGINE, GAS TURBINE, PART NUMBER

3800232-1-1 AND 3800232-1-3 AND 3800232-1-4 AND GTCP-36-50H.

NOTE: ALL WOOD BOXES, WOOD SKIDS, WOOD FILLER ASSEMBLIES, WOOD DUNNAGE ASSEMBLIES, AND WOOD PALLETS MUST BE ISPM-15 COMPLIANT. WOOD PACKAGING MATERIAL SHALL BE ASSEMBLED USING MATERIALS CERTIFIED COMPLIANT WITH AMERICAN LUMBER STANDARDS COMMITTEE (ALSC) NON-MANUFACTURED WOOD PACKING (NMWP) REGULATIONS AND INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) STANDARD REQUIREMENTS. FOR REFERENCE, SEE DEFENSE AMMUNITION CENTER

(DAC) DRAWING ACV00831.

THE ALSC QUALITY MARK SHALL CONTAIN THE APPROVED INTERNATIONAL SYMBOL FOR COMPLIANT PACKAGING (NO-INSECTS CIRCLE), THE TWO LETTER COUNTRY ABBREVIATION FOLLOWED BY THE PACKAGING MANUFACTURERS UNIQUE ID NUMBER AND THE LETTERS “HT” DESIGNATES HEAT TREATED.

THE SYMBOL, LOGO OR NAME OF THE ACCREDITED CERTIFYING AGENCY IS ALSO TO BE INCLUDED AND WHEN APPLICABLE, THE INDICATION FOR USE AS DUNNAGE (REFER TO URL: www.alsc.org FOR THE

APPROVED INTERNATIONAL SYMBOLS FOR COMPLIANT WOOD PACKAGING MATERIAL).

AVIATION GROUND POWER UNIT (CG)

AMCOM PKG SPEC.

DD Form 2169, JUN 1997 Previous editions are obsolete. Page 1 of 2 pages

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD contractors only; Administrative and Operational Use; 1 June 2017.

Other requests shall be referred to: Aviation Ground Support Equipment (AGSE) Project Office, ATTN: SFAE-AV-AS-AGSE, Redstone Arsenal, AL 35898-5710.

EXPORT CONTROL ACT: Warning – This Document Contains Technical Data Whose Export Is Restricted By The Arms Export Control Act (Title 22, U.S.C., sec 2751, et seq.) Or The Export Administration Act of 1979, As Amended, Title 50, U.S.C., App 2401 et seq. Violations Of These Export Laws Are Subject to Severe Criminal Penalties. Disseminate In Accordance With Provisions of DoD Directive 5230.25.

DESTRUCT NOTICE: Destroy By Any Means That Will Prevent Disclosure Of Contents Or Reconstruction Of The Document.

http://www.alsc.org/

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses.

1. PART OR DRAWING NO.

SEE NOTE *

2. CODE INDENT

99193

3. SPI NO.

AHX1800452

4. NATIONAL STOCK NO.

2835-01-180-0452

5. DATE OF DRAWING (JULIAN)

17152

6. REVISION

C

PACKAGING STEPS:

1. REFER TO TM 1-8145-695-24&P, APPENDIX E, FOR PRECISE PACKING/INSTALLATION INSTRCTIONS.

2. LOWER ENGINE INTO (STEP 1) MULTI-AGPU METAL CONTAINER (ASSURING ENGINE DOES NOT STRIKE THE

CONTAINER).

3. SECURE ENGINE TO MOUNTING RAIL WITH BOLTS, WASHERS AND NUTS (IAW TM 1-8145-695-24&P).

4. ENSURE (STEP 3) HUMIDITY INDICATOR IS BLUE AND FILL DESICCANT RECEPTABLE WITH 32 UNITS OF (STEP

2) DESICCANT.

5. PLACE CONTAINER COVER ONTO CONTAINER BASE (DO NOT LET ALLOW CONTAINER COVER TO COME

INTO CONTACT WITH THE ENGINE).

6. SECURE CONTAINER AS INDICATED ON CONTAINER LATCH NUT TORQUING WITH BOLT, WASHERS AND

NUTS (IAW TM 1-8145-695-24&P).

DD Form 2169C, JUN 1997 Previous editions are obsolete. Page 2 of 2 pages

Warning – This Document May Contain Export Controlled Technical Information.