Attachment 0003 - SOW for Development and Production of Equipment Publications.pdf

STATEMENT OF WORK (SOW) for

DEVELOPMENT AND PRODUCTION OF EQUIPMENT PUBLICATIONS

As of 18 June 2019 1 SOW for PFD Technical Manual

TECHNICAL MANUAL (TM) FIELD MAINTENANCE MANUAL

INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) FOR

PARACHUTIST FLOTATION DEVICE (PFD)

TM 10-1670-XXX-23&P

1 Scope

The Contractor shall develop and produce a Field Maintenance Manual including Repair Parts and Special Tools List (RPSTL) for the Parachutist Flotation Device (PFD), TM 10-1670-XXX-23&P.

All deliverables shall be developed in accordance with this SOW, applicable military standards (MIL-STDs), military handbook (MIL-HDBK), regulations, and guides. The Contractor shall reference other Army Technical Manuals, as appropriate, throughout the manual in accordance with MIL-STD guidance and the attached equipment publications content selection matrix.

DATA

ITEM

AUTHORITY

TITLE

A004

MIL-STD-40051-2C, MIL-HDBK 2361D,

MIL-HDBK-1222F

First, Second, and Final Reproducible Copy (FRC) Submissions of Field Maintenance Manual including Repair Parts and Special Tools List (RPSTL) for Parachutist Flotation Device (PFD), TM 10-1670-

XXX-23&P

https://www.logsa.army.mil/mil40051/menu.cfm

2 Applicable Documents

AR 25-30 The Army Publishing Program, 3 June 2015

AR 750-10 Army Modification Program, 5 August 2013

DA PAM 25-40 Army Publishing: Action Officers Guide, 13 June 2018

DA PAM 750-8

The Army Maintenance Management System (TAMMS) User’s Manual, 22 August 2005

DFARS 252.227-7013 Technical Data – Noncommercial Items

DOD Directive 5230.24 Distribution Statements on Technical Documents

MIL-HDBK-1222F

Department of Defense Handbook, Guide to the General Style and Format of U.S. Army Work Package Technical Manuals, 15 December 2015 (for guidance only) https://www.logsa.army.mil/mil40051/menu.cfm

MIL-HDBK-2361D

Department of Defense Army Digital Publications Development, Implementation Guide, 15 February 2019 https://www.logsa.army.mil/mil40051/menu.cfm

MIL-STD-40051-2C

Department of Defense Standard Practice, Preparation of Digital Technical Information for Page-Based Technical Manuals (TMs), 15 December 2015 https://www.logsa.army.mil/mil40051/menu.cfm

TMSS General Performance Specs/ Warning Icons

Individual Warning Icon graphic files and Warning Icons with Signal Words and Definitions, available from:

https://www.logsa.army.mil/#/tmsspecs https://www.logsa.army.mil/mil40051/menu.cfm https://www.logsa.army.mil/mil40051/menu.cfm https://www.logsa.army.mil/mil40051/menu.cfm https://www.logsa.army.mil/mil40051/menu.cfm https://www.logsa.army.mil/#/tmsspecs

Parachutist Flotation Device (PFD)

As of 18 June 2019 2 SOW for PFD Technical Manual

Government Furnished Information. The following items will be provided by the Government at the Start of Work meeting:

a) XML Document Type Definition (DTD), most recent revision for MIL-STD-40051-2C

b) XML Stylesheet, most recent revision for MIL-STD-40051-2C

c) Government-developed custom safety warning icons for air drop

d) Content selection matrix for MIL-STD-40051-2C

3 Publication Requirements

The Contractor shall develop and produce the technical manual IAW this SOW and the content selection matrix for MIL-STD-40051-2C.

3.1 TM Submissions. Publication submissions are required to meet all the format and content requirements of the applicable military specifications and standards listed in this SOW.

3.2 TM Content Selection Matrix Compliance. The MIL-STD-40051-2C Content Selection Matrix in this SOW (identified as Table A-IV) shall be used to organize and develop the content for the TM.

a) All items marked “R” in the matrix are required to support the equipment and shall be included in the order established in the matrix.

b) All items marked “AR” in the matrix shall be included as required to support the equipment, and if included, shall be included in the order established in the matrix.

c) All items marked “P” in the matrix are prohibited and shall not be included in the manual.

3.3 Maintenance Allocation Chart (MAC) Development. All maintenance procedures identified in the Government-approved Maintenance Allocation Chart (MAC) shall have corresponding maintenance, troubleshooting, and Preventive Maintenance Checks and Services (PMCS) procedures within the TM, as applicable. The MAC introduction and MAC tables shall be developed to conform to format and content requirements as detailed in MIL-STD-45001-2C. All item names of MAC functional groups shall be official nomenclature in accordance with the RPSTL nomenclature and nomenclature format/naming order. The MAC shall be updated to include changed or additional components and their corresponding maintenance functions.

3.4 Repair Parts and Special Tools List (RPSTL). The Contractor shall produce RPSTL information and artwork to support repair and replacement of parts. The RPSTL text, illustrations, and indexes shall conform to MIL-STD-45001-2C format requirements. The RPSTL parts list shall be updated to reflect part number changes as provided in approved engineering change packages (ECPs). The RPSTL figure title, the functional group title, and the applicable MAC title shall be identical. The RPSTL assemblies and subassemblies shall be in the same sequential order as the MAC. All submissions shall include RPSTL text and line art illustrations (photographs are discouraged), are subject to approval for use by technical publications, and will conform to guidance provided for graphics.

3.5 Alphabetical Index. Index shall be a detailed index with topics, subtopics, and page references, and shall be formatted in two columns with a subject column and a work package and page number column.

Index tags shall be used to designate content information for use in the index. An index automatically generated from TM headings will not be accepted.

3.6 XML Source Files. Publications shall be developed in eXtensible Markup Language (XML), IAW MIL-STD-40051-2C and a USAMC LOGSA-compliant Document Type Definition (DTD) and XML Stylesheet Language for Formatting Objects (XSL-FO) Stylesheet. The XML source files shall:

a) be a valid XML source file tagged in accordance with MIL-HDBK-2361D;

b) comply with the generally accepted XML industry standard definition of a “valid XML document.” All XML entity references shall be converted to relative file paths. XML external reference (xref) tagging shall be used to reference figures, tables, work packages, procedural steps, tools, and materials;

As of 18 June 2019 3 SOW for PFD Technical Manual

c) consist of a single, independent XML file with all referenced external graphic files;

d) permit the Government to parse and compose the XML using Arbortext Editor release 7.0 or later to produce the PDF submission document.

3.7 Naming Convention for Work Packages (WP). A unique alpha-numeric identification number (wpno is the element in the XML file) shall be identified for each WP (see 4.7.9.1 in MIL-STD 40051-2C). For example, M0032-10-1670-337

1st Character: Alpha designation for the type of WP (G=General information (gim), T=Troubleshooting procedures (tim), M=Maintenance instructions (mim), R=RPSTL (pim), S=Supporting Information (sim) )

2nd through 4th Characters: Sequential number of the work package (example above identifies this as the 32nd maintenance WP of the TM)

Remaining Characters: the TM number without the maintenance level

3.8 WP Worksheet. The Contractor shall produce a work package identification worksheet in electronic format (MS Word or Excel). This worksheet lists all work packages used in the TM, and as a minimum, will list in tabular format the following information:

a) Work package title

b) Work package identification number

c) Work package sequence number

3.9 Portable Document Format (PDF). The Contractor shall submit an editable PDF file for each submission in accordance with MIL-STD-45001-2C. Each PDF submission shall:

a) be a file generated from the XML source files using the Government-provided stylesheet;

b) be a single PDF file with all fonts embedded;

c) include a cover sheet that identifies where the PDF derived from the XML source files deviates from any requirements or guidance, if any; and

d) be delivered electronically to a representative for Technical Publications.

The final reproducible copy (FRC) PDF file shall reflect all content of the text and graphics contained in the FRC Submission accepted by the Government.

3.10 Data Release. The Contractor shall package and deliver all source material, defined as operating plans, standard procedures, and residual material to include computer disks and all other media containing digital or electronic files developed to fulfill the requirements of this SOW. The Contractor shall grant the Government unlimited rights to any and all data/products produced under this SOW including unlimited intellectual property rights and technical data rights.

4 Graphics

4.1 Illustrations. All TM submissions shall be fully illustrated IAW this SOW and MIL-STD 40051-2C.

The Contractor shall use graphics, including line drawings, photographs, engineering drawings, diagrams, charts, and graphs, as directed by the Government to ensure that procedural and descriptive text is sufficiently supported with accurate and clear illustrations.

As of 18 June 2019 4 SOW for PFD Technical Manual

4.2 Naming Convention. Unique identification numbers assigned to each graphic include

a) The figure identification number (id attribute of figure element) is required when a graphic is placed in the XML and is referenced by a callout (assocfig attribute of callout element). The alphanumeric naming convention for figure ids is as follows:

G001-1670337-F001

1st Character: Alpha designation for the type of WP in which the figure appears (G=gim, M=mim, R=pim)

2nd through 4th Characters: Number sequence of the WP in that chapter

5th through 11th Characters: TM number

12th through 15th digit: Sequential number of the figure (example above identifies the first figure in the first WP of the General Information chapter)

b) Board numbers (boardno attribute of graphic element) map the specific graphic to the placement in the XML file. The alphanumeric naming convention for boardno is as follows:

G1670337001

1st Character: Alpha designation for the type of WP in which the graphic appears (G=gim, M=mim, R=pim)

2nd through 8th Characters: TM number

9th through 11th Characters: Sequential number of graphic in the chapter (example above identifies the first graphic in the General Information, Equipment Description, and Theory of Operation Chapter) or WP

c) Icons for safety warnings and hazardous materials may be identified by their function, such as fire or chemical, and are preceded with an uppercase “I” (such as I_fire).

4.3 Graphics Worksheet. The Contractor shall produce a graphics worksheet in electronic format (MS Word or Excel). This worksheet shall list all graphics used in the TM, broken out by WP, in a tabular, sequential format with the following information (at a minimum):

a) Board identification number

b) Figure identification number

c) Figure title

d) Work package number

4.4 Use of the Human Figure. Illustrations may include parts of the human body such as a hand, arm, leg, or foot when necessary. Jewelry shall not appear in any illustration. The human figure shall:

a) be clothed as designated by the acquiring activity;

b) not contain any information that can identify the person including a face, rank insignia, identification numbers, unit/company/brigade patches, medals/wings, etc.;

c) not obscure details of the equipment necessary for a complete understanding of its operation; and

d) consist of a cross section of races and sexes.

4.5 Specifications for Graphics

4.5.1 Color and Grayscale. Graphic source files (the original layered files in a vector format such as Encapsulated PostScript (EPS) or Adobe Illustrator (AI) and graphic files referenced by the XML code, such as Portable Network Graphics (PNG) and Joint Photographic Experts Group (JPEG/JPG)) may be submitted in color. Each graphic file shall be submitted in a non-proprietary format, such as PNG or JPG, and be of such quality that when converted to a grayscale PDF, the image maintains adequate legibility and contrast in print.

As of 18 June 2019 5 SOW for PFD Technical Manual

4.5.2 File Layering. Graphic source files (including photographs) shall be layered and submitted in non-proprietary formats, such as EPS and AI. All callouts (anything placed on an illustration to aid in identifying the objects being illustrated, such as index numbers, nomenclature, leader lines, and arrows) in a graphic source file must be on a separate layer from the base image to ensure that callouts are editable.

4.5.3 Resolution. Graphics and icons shall provide 150 or 300 pixel per inch resolution.

4.5.4 Icons. Icons should be a consistent size throughout the manual; 0.5 x 0.5 inches is recommended.

4.5.5 Callouts. Index numbers and nomenclature may be used in the same technical manual; however, they shall not be used together in the same illustration (see 4.7.27.3.4 in MIL-STD 40051-2C).

4.5.6 Font Size in Graphics.

a) Callouts for graphics shall be sans serif, not less than 8 point, not more than 10 points, and be consistent throughout the TM. If nomenclature is used it shall be all uppercase.

b) Legends for graphics shall be sans serif, 8 point, with the first letter of the first word in uppercase.

(Legends are not to be confused with figure titles.)

5 Delivery Requirements for Technical Publications

5.1 Delivery of TM 10-1670-XXX-23&P. All submissions of the TM shall be delivered as an electronic PDF file as identified in 3.9 Portable Document Format (PDF).

5.1.1 First Submission TM. The First Submission of the Field Maintenance Manual including the Repair Parts and Special Tools Lists (RPSTL) shall include maintenance tasks as authorized by the Government-approved/accepted Two-Level Maintenance Allocation Chart (MAC).

5.1.2 Second Submission TM. Shall be derived from corrected copy of the First Submission TM and shall include corrections from technical testing, comments and recommendations, and the Government review of the First Submission TM.

5.1.3 Final Reproducible Copy (FRC) TM. The FRC shall include final resolution of all comments and recommendations made as a result of all testing, demonstrations, conferences (i.e., provisioning, technical manual verification, etc.), IPRs, and Government reviews accrued during the TM development process.

5.2 Submission Deliverables. Submissions shall include deliverable items marked with an R in the Delivery Requirements Table.

Delivery Requirements

Submission (CDRL)

PDF

File

XML

Sources

Graphic

Files

Graphic Sources

Graphics

Worksheet

WP

Worksheet

First Submission TM (A003) R R R R R R

Second Submission TM (A003) R R R R R R

Final Reproducible Copy TM (A003) R R R R R R

Key

Deliverable Name

Description

1 PDF File IAW 3.9 Portable Document Format (PDF)

2 XML Sources XML sources include a single XML file with all referenced external graphic files IAW 3.6 XML Source Files

3 Graphic Files Graphic files referenced by the XML IAW 4.5.1 Color and Grayscale

4 Graphic Source Files Graphic source files are layered graphic and photographic source files used to create the graphic files referenced by the XML IAW 4.5.2 File Layering

5 Graphics Worksheet IAW 4.3 Graphics Worksheet

6 WP Worksheet IAW 3.8 WP Worksheet

As of 18 June 2019 6 SOW for PFD Technical Manual

6 Acceptances/Rejections of Deliverables

No scheduled submission requirement shall be considered met until the Government provides written acceptance. If rejected, the rejection will be made in writing and include specific rejection comments from the Government. Acceptance or rejection of all submissions shall be based on conformance to contractual requirements and the MIL-STD. If the submission is rejected it is considered a draft until the Contractor makes the corrections and it is accepted by the Government.

7 TM-Related Meetings and Conferences

7.1 Logistics Guidance Conference/Start of Work Meeting. This meeting shall take place at a Government facility (unless otherwise specified by the Government) within 30 days after contract award to clarify all matters relating to development, preparation, and submission of contract data deliverables. The Contractor shall be prepared to ask any questions and discuss all TM requirements. A follow-on meeting between Contractor and Government Technical Publications representatives shall be held to discuss XML requirements, structure of deliverables, and DTD and Stylesheet usage as they relate to the development of equipment publications for this contract. The Contractor shall be prepared to discuss XML requirements at this time. The Contractor shall also provide a sample graphics file for discussions concerning format and quality. Additional guidance will be available through In-Process Review meetings.

7.2 In-Process Reviews (IPR). IPR teleconferences will be held as agreed to by both the Government and the Contractor at the Start of Work Meeting and then as required. During preparation of equipment publications, these IPRs will be used to clarify requirements and provide guidance to the Contractor, ensuring the publication is written to conform to this SOW, the appropriate MIL-STD, and the Content Selection Matrix. Either the Contractor or the Government may request additional IPRs by teleconference or in person as required for development and delivery of the TM. The Government will notify the Contractor not less than five days prior to each formal IPR. IPR locations shall be as specified by the Government. If scheduled at the Contractor's site, the Contractor shall make adequate space, facilities, and personnel available for Government scheduled IPRs at no additional cost to the Government.

7.3 Verification Conference. Verification of the technical manual is the responsibility of the Government.

Maintenance procedures, including all PMCS, troubleshooting, and the RPSTL will be 100 percent verified IAW AR 25-30 and AMC PAM 25-31, with the exception of maintenance procedures which were verified previously and are carried forward verbatim. Contractor participation is required. Contractor will have subject matter experts (i.e. writer, system expert (if applicable), etc.) present for the duration of the verification conference.

7.3.1 Verification Plan. The Government will draft and submit for review a Verification Plan IAW AMC PAM 25-31. The Contractor shall review the plan for accuracy, applicability, and availability of Contractor personnel and support, and shall provide any commentary to the Government no later than 10 calendar days after receipt.

7.3.2 Government Responsibilities for Verification. The Government shall coordinate the necessary personnel, facilities, equipment, tools, test equipment, supplies, and pertinent documents required for the Verification Conference. The Verification will be scheduled in accordance with the Verification Plan. The Contractor shall take corrective action resulting from the Verification and modify subsequent submission(s) accordingly.

TABLE A-IV. Combined maintenance and maintenance with parts requirements matrix for

Parachutist Flotation Device (PFD) TM 10-1670-XXX-23&P.

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

FRONT MATTER R 5.2.1 <paper.frnt>

Front cover R 5.2.1.1 <frntcover>

(MC) Promulgation letter P 5.2.1.3 <promulgation>

Warning summary R 5.2.1.4 <warnsum>

Change transmittal page P 5.2.1.5 <chgsheet>

List of effective pages/work packages R 5.2.1.6 <loepwp>

Title page R 5.2.1.7 <titleblk>

Table of contents R 5.2.1.9 <contents>

How to use this manual R 5.2.1.10 <howtouse>

CHAPTER 1.

GENERAL INFORMATION, EQUIPMENT

DESCRIPTION, AND THEORY OF

OPERATION

R

APPENDIX B

<gim>

GENERAL INFORMATION WORK PACKAGE R B.5.2 <ginfowp>

Scope R B.5.2.3 <scope>

Maintenance forms, records, and reports R B.5.2.4 <mfrr>

Reporting Equipment Improvement

Recommendations (EIR)

R B.5.2.5 <eir>

Hand Receipt (HR) information AR B.5.2.6 <handreceipt>

Corrosion Prevention and Control (CPC) R B.5.2.7 <cpcdata>

Ozone Depleting Substances (ODS) P B.5.2.8 <odsdata>

Destruction of Army materiel to prevent enemy use

R B.5.2.9 <destructmat>

Preparation for storage or shipment R B.5.2.10 <pssref>

Transportability guidance R B.5.2.11 <transportability>

Warranty information P B.5.2.12 <wrntyref>

Nomenclature cross-reference list R B.5.2.13 <nomenreflist>

List of abbreviations R B.5.2.14 <loa>

Quality of material R B.5.2.16 <qual.mat.info>

Safety, care, and handling AR B.5.2.17 <sftyinfo>

Nuclear hardness P B.5.2.18 <hcp>

Calibration P B.5.2.19 <calref>

Item unique identification (IUID) AR B.5.2.20 <iuid>

Supporting information for repair parts, special tools, TMDE, and support equipment AR

B.5.2.27 <supdata>

Copyright credit line P B.5.2.28 <copyrt>

EQUIPMENT DESCRIPTION AND DATA

WORK PACKAGE

R B.5.3 <descwp>

Equipment characteristics, capabilities, and features

R B.5.3.3 <eqpinfo>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

Location and description of major components

R B.5.3.4 <locdesc>

Equipment differences R B.5.3.5 <eqpdiff>

Equipment data R B.5.3.6 <eqpdata>

THEORY OF OPERATION WORK PACKAGE R B.5.4 <thrywp>

CHAPTER X.

TROUBLESHOOTING

MASTER INDEX

P

APPENDIX D

D.5.4.4

<tim>

<masterindexcategory>

TROUBLESHOOTING INDEX WORK

PACKAGE

P D.5.5.5 <tsindxwp>

CHAPTER 2.

TROUBLESHOOTING PROCEDURES

NOTE

The notation (*) indicates that at least one of the these content items shall be included

R

APPENDIX D

D.5.4.2

<tim>

<troublecategory>

INTRODUCTION WORK PACKAGE AR D.5.5.3 <tsintrowp>

TROUBLESHOOTING INDEX WORK

PACKAGE

AR D.5.5.5 <tsindxwp>

*OPERATIONAL CHECKOUT WORK

PACKAGES

AR D.5.5.8.3 <opcheckwp>

*TROUBLESHOOTING WORK PACKAGES AR D.5.5.8.4 <tswp>

*COMBINED OPERATIONAL CHECKOUT

AND TROUBLESHOOTING WORK

PACKAGES

AR D.5.5.8.5 <opcheck-tswp>

CHAPTER X.

PMCS

MAINTENANCE INSTRUCTIONS

NOTE

PMCS may be in its own chapter or may be combined with other maintenance work packages in a maintenance chapter but not both places.

P

APPENDIX E

E.5.2.1

<mim>

<pmcscategory>

PMCS INTRODUCTION WORK PACKAGE P E.5.3.4.1 <pmcsintrowp>

PMCS, INCLUDING LUBRICATION

INSTRUCTIONS, WORK PACKAGE

P E.5.3.4.2 <pmcswp>

CHAPTER 3.

MAINTENANCE INSTRUCTIONS

NOTE

PMCS may be in its own chapter or may be combined with other maintenance work packages in a maintenance chapter but not both places.

R APPENDIX E

E.5.2.2

E.5.2.3

<mim>

<maintenancepmcscategory>

<maintenancecategory>

SERVICE UPON RECEIPT WORK PACKAGE R E.5.3.2 <surwp>

Service upon receipt tasks AR E.5.3.2.3 <surtsk>

Siting P E.5.3.2.3.1 <siting>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

Shelter requirements P E.5.3.2.3.2 <shltr>

Service upon receipt of materiel AR E.5.3.2.3.3 <surmat>

Installation instructions AR E.5.3.2.3.4 <install>

Preliminary servicing of equipment AR E.5.3.2.3.5 <preserv>

Preliminary checks and adjustment of equipment

AR E.5.3.2.3.6 <prechkadj>

Preliminary calibration of equipment AR E.5.3.2.3.7 <precal>

Circuit alignment P E.5.3.2.3.8 <calign>

Ammunition markings P E.5.3.2.3.9.1 <mark>

Classification of defects P E.5.3.2.3.9.2 <ammo.defect>

Ammunition handling P E.5.3.2.3.9.3 <ammo.handling>

Procedures to activate ammunition P E.5.3.2.3.9.4 <arm>

Additional service upon receipt task AR E.5.3.2.3.10 <other.surtsk>

Follow-on maintenance AR E.5.3.2.3.11 <followon.maintsk>

EQUIPMENT/USER FITTING INSTRUCTIONS

WORK PACKAGE

AR E.5.3.3 <perseqpwp>

PMCS INTRODUCTION WORK PACKAGE R E.5.3.4.1 <pmcsintrowp>

PMCS WORK PACKAGE R E.5.3.4.2 <pmcswp>

MAINTENANCE WORK PACKAGES R E.5.3.5 <maintwp>

Maintenance tasks R E.5.3.5.3 <maintsk>

Inspect AR E.5.3.5.3.2 <inspect>

Test AR E.5.3.5.3.3 <test>

Service AR E.5.3.5.3.4 <service>

Adjust AR E.5.3.5.3.5 <adjust>

Align AR E.5.3.5.3.6 <align>

Calibrate AR E.5.3.5.3.7 <calibration>

Remove AR E.5.3.5.3.8 <remove>

Install AR E.5.3.5.3.9 <install>

Replace AR E.5.3.5.3.10 <replace>

Repair AR E.5.3.5.3.11 <repair>

Paint AR E.5.3.5.3.12 <paint>

Overhaul AR E.5.3.5.3.13 <overhaul>

Rebuild AR E.5.3.5.3.14 <rebuild>

Lubricate AR E.5.3.5.3.15 <lube>

Mark AR E.5.3.5.3.16 <mark>

Pack AR E.5.3.5.3.17 <pack>

Unpack AR E.5.3.5.3.18 <unpack>

Preserve AR E.5.3.5.3.19 <preservation>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

Prepare for use AR E.5.3.5.3.20 <prepforuse>

Assemble AR E.5.3.5.3.21 <assem>

Disassemble AR E.5.3.5.3.22 <disassem>

Clean AR E.5.3.5.3.23 <clean>

Nondestructive inspection AR E.5.3.5.3.24 <ndi>

Radio interference suppression P E.5.3.5.3.25 <ris>

Place in service AR E.5.3.5.3.26 <pis>

Towing P E.5.3.5.3.27 <tow>

Jacking P E.5.3.5.3.28 <jack>

Parking P E.5.3.5.3.29 <park>

Mooring P E.5.3.5.3.30 <moor>

Covering P E.5.3.5.3.31 <cover>

Hoisting P E.5.3.5.3.32 <hoist>

Sling loading P E.5.3.5.3.33 <sling>

External power P E.5.3.5.3.34 <extpwr>

Preparation for storage R E.5.3.5.3.35 <prepstore>

Preparation for shipment R E.5.3.5.3.36 <prepship>

Transport R E.5.3.5.3.37 <transport>

Arm P E.5.3.5.3.38 <arm>

Load P E.5.3.5.3.39 <load>

Unload P E.5.3.5.3.40 <unload>

Install peripheral device P E.5.3.5.3.41 <installperdev>

Uninstall peripheral device P E.5.3.5.3.42 <uninstallperdev>

Upgrade/patch software P E.5.3.5.3.43 <upgrade>

Configure software P E.5.3.5.3.44 <configure>

Debug software P E.5.3.5.3.45 <debug>

Additional maintenance task AR E.5.3.5.3.46 <other.maintsk>

Follow-on maintenance AR E.5.3.5.3.47 <followon.maintsk>

GENERAL MAINTENANCE WORK PACKAGE P E.5.3.7 <gen.maintwp>

LUBRICATION INSTRUCTIONS WORK

PACKAGE P

E.5.3.8 <lubewp>

ILLUSTRATED LIST OF MANUFACTURED

ITEMS WORK PACKAGE

AR E.5.3.10

Illustrated list of manufactured items introduction work package

R E.5.3.10.1 <manu_items_introwp>

Manufacturing procedures work package R E.5.3.10.2 <manuwp>

TORQUE LIMITS WORK PACKAGE P E.5.3.11 <torquewp>

WIRING DIAGRAMS WORK PACKAGE P E.5.3.12 <wiringwp>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

CHAPTER X.

AUXILIARY EQUIPMENT

MAINTENANCE INSTRUCTIONS

P

APPENDIX E

E.5.2.6

<mim>

<auxiliarycategory>

AUXILIARY EQUIPMENT MAINTENANCE

WORK PACKAGE P

E.5.3.14 <auxeqpwp>

ILLUSTRATED LIST OF MANUFACTURED

ITEMS WORK PACKAGE P

E.5.3.10

Illustrated list of manufactured items introduction work package

P E.5.3.10.1 <manu_items_introwp>

Manufacturing procedures work package P E.5.3.10.2 <manuwp>

TORQUE LIMITS WORK PACKAGE P E.5.3.11 <torquewp>

WIRING DIAGRAMS WORK PACKAGE P E.5.3.12 <wiringwp>

CHAPTER X.

AMMUNITION

MAINTENANCE INSTRUCTIONS

P

APPENDIX E

E.5.2.7

<mim>

<ammunitioncategory>

AMMUNITION MAINTENANCE WORK

PACKAGE P

E.5.3.15.1 <ammowp>

AMMUNITION MARKING INFORMATION

WORK PACKAGE P

E.5.3.15.2 <ammo.markingwp>

FOREIGN AMMUNITION (NATO) WORK

PACKAGE P

E.5.3.15.3 <natowp>

CHAPTER X.

DESTRUCTION OF EQUIPMENT TO

PREVENT ENEMY USE

NOTE

If a separate destruction of material manual is not developed for this equipment, then the destruction chapter must be included.

AR

APPENDIX H <dim>

DESTRUCTION PROCEDURES

INTRODUCTION WORK PACKAGE

R

H.5.3 <destruct-introwp>

Authority to destroy R H.5.3.3 <authorize_to_destroy>

Reporting destruction R H.5.3.4 <report_destruct>

General destruction information R H.5.3.5 <general_destruct_info>

Degree of destruction R H.5.3.6 <degree_of_destruct>

Essential components and spare parts AR H.5.3.7 <component_spares>

DESTRUCTION WORK PACKAGE R H.5.4 <destruct-materialwp>

Parts list R H.5.4.3 <essential_spares>

Specific destruction procedures R H.5.4.4 <proc>

SOFTWARE INFORMATION P Appendix M <soim>

<softwarecategory>

SOFTWARE GENERAL INFORMATION

WORK PACKAGE

P M.5.3.1 <softginfowp>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

System Overview P M.5.3.1.6 <softsysover>

Document Overview P M.5.3.1.7 <softdocover>

SOFTWARE SUMMARY WORK PACKAGE P M.5.3.2 <softsumwp>

SOFTWARE EFFECTIVITY WORK PACKAGE P M.5.3.3 <softeffectwp>

DIFFERENCES BETWEEN SOFTWARE

VERSIONS WORK PACKAGE P

M.5.3.4 <softdiffversionwp>

FEATURES AND CAPAIBLITIES WORK

PACKAGE

P M.5.4.1 <softfeaturescapwp>

SCREEN DISPLAYS WORK PACKAGE P M.5.4.2 <softscreendisplaywp>

MENUS/DIRECTORIES WORK PACKAGE P M.5.4.3 <softmenuwp>

TOOLS AND BUTTONS WORK PACKAGES P M.5.4.4 <softtoolswp>

SECURITY AND PRIVACY PROCEDURES

WORK PACKAGE

P M.5.5.1 <softsecprivwp>

SUPERVISORY CONTROLS WORK PACKAGE P M.5.5.2 <softsuperctrlswp>

POWERUP/STARTUP AND

POWERDOWN/SHUTDOWN PROCEDURES

WORK PACKAGE

P M.5.5.3 <softpowerupwp>

ACCESSING/EXITING SOFTWARE WORK

PACKAGE

P M.5.5.4 <softaccesswp>

KEY COMMANDS WORK PACKAGE P M.5.5.5 <softkeycmdswp>

PROCESSES AND COMMANDS WORK

PACKAGE

P M.5.5.6 <softproccmdwp>

USER INTERFACE WORK PACKAGE P M.5.5.7 <softguiwp>

SOFTWARE OPERATING CONVENTIONS

WORK PACKAGE

P M.5.5.8 <softopconventionswp>

ADDITIONAL SOFTWARE OPERATION WP P M.5.5.9 <softgenwp>

MESSAGES WORK PACKAGE P M.5.6.3 <softmessageswp>

RECOVERY FROM ERRORS,

MALFUNCTIONS, AND EMERGENCIES

WORK PACKAGE

P M.5.6.4 <softerrorswp>

CHAPTER 4.

RPSTL (–23&P) R

APPENDIX F <pim>

INTRODUCTION WORK PACKAGE R F.5.3.5 <introwp>

REPAIR PARTS LIST WORK PACKAGE R F.5.3.6 <plwp>

REPAIR PARTS FOR SPECIAL TOOLS WORK

PACKAGE AR

F.5.3.7 <stl_partswp>

KIT PARTS LIST WORK PACKAGE AR F.5.3.8 <kitswp>

BULK ITEM WORK PACKAGE AR F.5.3.9 <bulk_itemswp>

SPECIAL TOOLS LIST WORK PACKAGE AR F.5.3.10 <stlwp>

NSN INDEX WORK PACKAGE R F.5.3.11.1 <nsnindxwp>

P/N INDEX WORK PACKAGE R F.5.3.11.2 <pnindxwp>

M Content -23&P

MIL-STD-40051-2C

Reference Element Name

REFERENCE DESIGNATOR INDEX WORK

PACKAGE

AR F.5.3.11.3 <refdesindxwp>

CHAPTER 5.

SUPPORTING INFORMATION

NOTE

Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.

R APPENDIX G <sim>

REFERENCES WORK PACKAGE R G.5.2 <refwp>

INTRODUCTION FOR NON-AVIATION TWO-

LEVEL MAC WORK PACKAGE

R G.5.3.1 <macintrowp>

NON-AVIATION TWO-LEVEL MAC WORK

PACKAGE

R G.5.3.3 <macwp>

EXPENDABLE AND DURABLE ITEMS WORK

PACKAGE

R G.5.7 <explistwp>

TOOL IDENTIFICATION LIST WORK

PACKAGE

R G.5.8 <toolidwp>

MANDATORY REPLACEMENT PARTS WORK

PACKAGE

R G.5.9 <mrplwp>

CRITICAL SAFETY ITEMS WORK PACKAGE R G.5.10 <csi.wp>

SUPPORT ITEMS WORK PACKAGE AR G.5.11 <supitemwp>

ADDITIONAL SUPPORTING WORK

PACKAGES

AR G.5.12 <genwp>

REAR MATTER R 5.2.2 <rear>

Glossary AR 5.2.2.1 <glossary>

Alphabetical index R 5.2.2.2 <aindx>

DA Form 2028 R 5.2.2.3 <da2028>

Authentication page R 5.2.2.4 <authent>

Foldout pages AR 5.2.2.5 <foldsect>

Back cover R 5.2.2.6 <back>

Legend

R - Required AR - As Required

P – Prohibited