Attachment 0003 - MO CSI.pdf

08/23/2021

2020H052PRID 7-311411003-625Part Number

1615-01-512-0889NSN AH-64System

HEAD, ROTARY WINGNomenclature

YAdequate DMWR Available?

DMWR-1-1615-312DMWR ID

07/09/2010DMWR Date

1DMWR Chg #

YPre-Award Survey Recommended?

NCorrelation Performance Study Required ? YPVA Recommended?

Shot peen from approved source only.

Ultrasonic inspection with kit, outboard bolt (MEO E2010A)

Fatigue Technologies expanding sleeve repair (Forcemate bushings), certified personnel, tooling. (see Critical tools and test/inspectin equipment requiring AED approval for substitutes.

Identify Any Special Processes, Test Procedures, and/or Instructions

YCritical Safety Item?

Army Aviation Safety Action Message H-64-19-ASAM-09 with addendum 1 takes precedence over affect portions of MEO E1479 Rev F main rotor strap pack inspection.

A modified strap pack design is in work. If it is fielded during the contract, required tech data will be incorporated in the contract as needed.

Evidence of possession or plan to obtain necessary special tooling and equipment will be required.

Special Airworthiness Considerations

10 June 2020 - FCDD-AMA-M-Sustainment has verified the CSI/NST status through the ARISE CIM on 10 June 2020 and the NHA is CSI and NST. The subcomponents are CSI and NST. Engineering testing, Fatigue, Endurance, and Interchange are not required for overhaul. Updated NHA table in ARISE database. No other changes. DEM

Other Requirements / Comments

If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:

NSpecial Post-Contract Award Requirements?

The Prime or OEM is required to submit a Frozen Plan 30 days after contract award to Engineering Directorate (ED) and Aviation Engineering Directorate (AED). The Frozen Plan will be reviewed and require approval by ED and AED prior to government acceptance of contract deliverable assets.

Other Requirements / Comments (Part II)

This part number has AMA-M IUID marking instructions via DMWR 1-1615-312 dated 9 July 2010. These procedures can be found in MEO(s) E1846, E1847, E1848C, 1849B, E1850, E1851A

Other Requirements / Comments (Part III)

FCDD-AMA-M-Sustainment has re-verified the CSI/NST status through the ARISE CIM on 3 Sept 2020 and the NHA is CSI and NST. The subcomponents are CSI and NST. Engineering testing, Fatigue, Endurance, and Interchange are not required for overhaul. No changes made. DEM

Other Requirements / Comments (Part IV)

YDoes QE-STD-2 Apply?

Y

Additional CSI Requirements

CSI Contains CSI Replacement Parts? YEngineering Testing Required?

The Contractor shall flow down the Critical Characteristics and QE-STD-1 to all Suppliers of CSIs.

The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:

1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.

RStatus

YTDPL?

01/16/2004Approved Date

M&O AED REQUIREMENTS DATA

Commerciality Determination

Commercial Item? N NBest Commercial Practice Acceptable?

1615-01-512-0889NSN AH-64System

Special Post-Contract Award Requirements

Other Requirements / Comments (Part V)

RStatus

Correlation Performance Study Requirements

1615-01-512-0889NSN AH-64System

E1349C

E1392

E1459

E1471E

E1480A

E1513

E1515A

E1516

E1520B

E1521

E1522

E1523

E1524A

E1525

E1526

E1527

E1528

E1529A

E1530

E1531

E1532A

E1533

E1534B

E1536A

E1537A

E1538

E1539A

E1540B

E1541A

E1542

E1543

E1544A

E1545

E1547

E1577

E1616

E1618

E1632A

E1649

E1672

E1673

E1677B

E1678

E1680

E1692B

E1698A

E1715

E1761A

E1846

Strap pack outboard bolt ultrasonic inspection kit (MEO E2010A) Fatigue Technologies Forcemat Bushing tooling.

Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes

MEOs Required for Competitive Contract?

1615-01-512-0889NSN AH-64System

E1847

E1848C

E1849B

E1850

E1851A

E2010A

E2046

E2055

E2109B

E2117

E2144

E2162

E2170

E2177

E2184

E2206

E2212

E2289B

E2301

E2305

E2342

E2350

E2358

E2393B

E2395

E2432

E2466

E2490

E2538

T7671

T7672

T7675

T7722

T7723A