Attachment 0002- Scopes of Accreditation 7-7-22.xlsx

XLSX spreadsheet 33 KB Posted Aug 12, 2022

Attached to: GVSC ISO/IEC 17025 Laboratory Accreditation
Solicitation number: W56HZV-22-R-L061
Issued by: Department of the Army Materiel Command TACOM Life Cycle Management Command

View the file

Other files

File	Type	Posted
Attachment 0002 Scopes of Accreditation.xlsx	XLSX spreadsheet	Aug 16, 2022
ISO Audits CDRL A003 v3.pdf	PDF	Aug 12, 2022
ISO Audits CDRL A001 v3.pdf	PDF	Aug 12, 2022
ISO Audits CDRL A002 v3.pdf	PDF	Aug 12, 2022
W56HZV-22-R-L061.pdf	PDF	Aug 12, 2022
EXHIBIT B- Performance Requirements Summary.docx	DOCX document	Aug 12, 2022

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

GVPM - Mechanical

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM – GROUND VEHICLE SYSTEMS CENTER

GROUND VEHICLE POWER & MOBILITY

6501 E. 11 Mile Road Building 212 and 212B Detroit Arsenal, MI 48397

perform the following types of tests on Diesel Engines, Turbine Engines, Customer Specific Engines, and Military and Commercial Vehicles and components, High-Power Traction Motors, Inline Generators, Inverters, DC-DC Converters, Alternators, Hybrid Electric Technology Components, Heat Exchangers, Radiators
Mechanical Scope Expires: 1/31/2024
Technology	Range	Test Method
Engine / Engine Component, Full Vehicle / Vehicle Component Dynamometer Testing	Torque (1 to 7 400) lb-ft Engine/Transmission Component (1 to 14 300) lb-ft Each Wheel (1 to 60 000) lb-ft Each Track (1 to 70 000) lb-ft Axle	LQP-13-WI01, LQP-13-WI02, LQP-13-WI03, LQP-13-WI04, LQP-13-WI08, LQP-13-WI09, LQP-13-WI12, LQP-20-WI17, LQP-20-WI18, LQP-20-WI19, LQP-20-WI23, Customer Specific, Military and Commercial Vehicl
	Rotational Speed (0 to 200 000) RPM
	Power Up to 1 600 HP
	Pressure (-5 to 6 000) Psig
	Liquid Flow (1 to 250) GPM
	Liquid Flow – Mass (1 to 1 000) lbs/hr
	Air Flow (125 to 10 100) ACFM
	Temperature (-90 to 2 000) °F
	Humidity (10 to 90) %RH
	Temperature (Environmental) (-90 to 175) °C
	Solar Load To 1 200 W/m2

GVPM - Electrical

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM – GROUND VEHICLE SYSTEMS CENTER

GROUND VEHICLE POWER & MOBILITY

6501 E. 11 Mile Road Building 212 and 212B Detroit Arsenal, MI 48397

perform the following types of tests on Battery Cells, Modules, Packs, Ultra-Capacitors, Automotive and Heavy-Duty Electrical Components and Systems, High-Power Traction Motors, Inline Generators, Inverters, DC-DC Converters, Alternators, Hybrid Electric Technology Components
Electrical Scope Expires: 1/31/2024
Technology	Range	Test Method
Engine / Engine Component, Full Vehicle / Vehicle Component Dynamometer Testing	Torque (1 to 7 400) lb-ft Engine/Transmission Component (1 to 14 300) lb-ft Each Wheel (1 to 60 000) lb-ft Each Track (1 to 70 000) lb-ft Axle	LQP-13-WI01, LQP-13-WI02, LQP-13-WI03, LQP-13-WI04, LQP-13-WI08, LQP-13-WI09, LQP-13-WI12, LQP-20-WI17, LQP-20-WI18, LQP-20-WI19, LQP-20-WI23, Customer Specific, Military and Commercial Vehicl
	Rotational Speed (0 to 200 000) RPM
	Power Up to 1 600 HP
	Pressure (-5 to 6 000) Psig
	Liquid Flow (1 to 250) GPM
	Liquid Flow – Mass (1 to 1 000) lbs/hr
	Air Flow (125 to 10 100) ACFM
	Temperature (-90 to 2 000) °F
	Humidity (10 to 90) %RH
	Temperature (Environmental) (-90 to 175) °C
	Solar Load To 1 200 W/m2

DTL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM GROUND VEHICLE SYSTEMS CENTER

DURABILITY TEST LABORATORY

6501 E 11 Mile Road Building 215, MS 157 Detroit Arsenal, MI 48397

Perform the following types of tests on Vehicle Systems, Subsystems, and Components:
Mechanical Scope Expires: 1/31/2024
Technology	Range	Test Method
Vehicle Inertial Properties Characterizatio	Inertia for Pitch, Roll, and Yaw based on:

Vehicle Weight: 3,000 - 100,000 lbf Track Width: Up to 110 in Distance from Front or Rear Axle to:

Longitudinal Center of Gravity: Up to 247 in

Center of Gravity Height: Up to 60 in	ehicle Inertia Parameter Evaluation Rig (VIPER) II Operators Manual
	Suspension Component Characterization	Displacement: Up to 14 in

Force: Up to 40,000 lbf Velocity: Up to 240 in/s

Acceleration: Up to 100 g	Customer Specific
	Vibration (Single Axis)	Vertical Force: Up to 55,000 lbf

Displacement: Up to 20 in Frequency: Up to 5,000 Hz Velocity: Up to 200 in/s Acceleration: Up to 320 g

Environment: -60 to 160°F / 5% to 95% RH	MIL-STD-810 - Method 514 Procedure 1 - Method 516 - Method 525 Procedure 1 - Method 527
	Vibration (Multi Axis)	Payload: Up to 1,100 lbf

Displacement: ±1 in Angular Displacement: ±4 ° Frequency: Up to 500 Hz Velocity: Vertical 31 in/s, Lateral 23 in/s, Longitudinal 23 in/s Acceleration: Vertical 20 G, Lateral 12 G, Longitudinal 14 G

Environment: -60 to 160°F	MIL-STD-810 - Method 514 Procedure 1 - Method 525 Procedure 1 - Method 527 Procedure 1
	Ancillary Measurements	Temperature Measurement: -454 to 700°F Displacement Measurement: Up to 30 in Acceleration Measurement: Up to 400 G Force Measurement: Up to 50,000 lbf	LQP-14-WI01

BTL

SCOPE OF ACCREDITION TO ISO/IEC 17025:2017

U.S. ARMY - DEVCOM - GROUND VEHICLE SYSTEMS CENTER

BRIDGE TECHNOLOGY LABORATORY

44090 Schilling Street Building 1424 Harrison Township, MI 48045

Perform the following types of tests on Bridges and Gap Crossing Equipment:
Mechanical Scope Expires: 1/31/2024
Technology	Range	Test Method
Structural Strength Test

Durability Test	Load (Up to 1 000 000) lbf
Displacement Up to 50 in	Trilateral Design and Test Code for Military Bridging and Gap-Crossing Section 8.5; LQTM-18-01 LQTM-18-02
	Dimensional Scope Expires: 1/31/2024
	Technology	Range	Test Method
	Outside Diameter 3	Up to 6 in	LQP-18-WI06
	Inside Diameter 3	(0.7 to 6) in	LQP-18-WI06
	3 This test is not equivalent to that of a calibration.

OPL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM - GROUND VEHICLE SYSTEMS CENTER

OCCUPANT PROTECTION LABORATORY

44030 Schilling Street, Building 1426 Harrison Township, MI 48045 Bldg 1426 (SANGB) Harrison Township, MI 48045

Performs the following types of tests on Military Vehicle Sub-Systems, Components, and Interior Components:
Mechanical Scope Expires: 1/31/2024
Technology	Range	Test Method
Head Impact		FMVSS 201U (Modified)1

LQP-25-01

Sub-System Drop Tower (SSDT)	Acceleration Measurement: Up to 1000 g0	LQP-25-02 Customer Specific2
1 Deviation on impact locations.
2 This laboratory is also accredited to perform testing using customer specific requirements/methods

FLL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM GROUND VEHICLE SYSTEMS CENTER

FUELS AND LUBRICANTS LABORATORY

6501 E. 11 Mile Road Building 210 Detroit Arsenal, MI 48397 Performs the following types of tests on Jet Fuel, Diesel Fuel, Engine Oil, Lubrication Oil, and Hydraulic Fluid:

Mechanical Scope Expires: 1/31/2024
Test	Test Method
Flash Point (Automatic)	ASTM D93
Distillation	ASTM D86,
Copper Strip Corrosion	ASTM D130
Viscosity (Automatic)	ASTM D445, D7042
Titration	ASTM D664 (TAN), D3242 (TAN), D4739 (TBN)
Calculated Cetane Index	ASTM D976, D4737
Density	ASTM D1298, D4052
Hydrocarbon Types	ASTM D1319
Smoke Point	ASTM D1322
Viscosity Index	ASTM D2270
Sulfur, Total	ASTM D2622
Fuel Electrical Conductivity	ASTM D2624
Net Heat of Combustion	ASTM D3338/D3338M
Hydrogen Content	ASTM D3343
Water Separation Index	ASTM D3948, D7224
Lubricity	ASTM D5001 (BOCLE), D6079 (HFRR)
Fuel System Icing Inhibitor	ASTM D5006
Elemental Analysis by ICP (Ag, Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sn, Ti, V, Zn, P, B, Si)	ASTM D5185
Freeze Point	ASTM D7153
Color	ASTM D6045
Water Content	ASTM D6304 (Procedure C)
Derived Cetane Number	ASTM D6890, D7668
Soot Content	ASTM D7686

SABL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM – GROUND VEHICLE SYSTEMS CENTER

SURVIVABILITY ARMOR BALLISTICS LABORATORY

6501 E. 11 Mile Road Building 219, MS 263 Detroit Arsenal, MI 48397

Performs the following types of tests on Transparent Armor
Mechanical Scope Expires: 1/31/2024
Test	Test Method
Ballistic Qualification	ATPD 2352 Section 4.5

APL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY –DEVCOM - GROUND VEHICLE SYSTEMS CENTER

ARMY PETROLEUM LABORATORY

5085 U Ave., Bldg 85 New Cumberland, PA 17070-5083 Performs the following types of tests on jet fuel, lubricating oil, hydraulic fluid, greases, and antifreeze:

Mechanical Scope Expires: 1/31/2024
Test	Test Method
Flash Point	ASTM D56 (Automated); ASTM D92 (Automated)
Fire Point	ASTM D92
Distillation	ASTM D86; ASTM D1078
Copper Strip Corrosion	ASTM D130; ASTM D4048
Ash Content	ASTM D482; ASTM D874; ASTM D1119
Titration	ASTM D664; ASTM D3242
Calculated Cetane Index	ASTM D976; ASTM D4737
Density	ASTM D1298; ASTM D4052; ASTM D5931
Sulfur, Total	ASTM D5453
Fuel Electrical Conductivity	ASTM D2624
Fuel System Icing Inhibitor	ASTM D5006
Particulate Matter	ASTM D5452; ASTM D6217
Pour Point	ASTM D5949
Freeze Point	ASTM D7153
Color	ASTM D1500; ASTM D6045
Water Content	ASTM D6304 (Procedure A)
Penetration/Stability	ASTM D217; ASTM D1403
Rust Prevention	ASTM D1743; ASTM D1748
Evaporation Loss	ASTM D972; ASTM D2595; ASTM D5800 (Procedure B)
pH	ASTM D1287; ASTM D6423
Water Resistance	ASTM D1264
Oil Separation	ASTM D1742; ASTM D6184
Foam Test	ASTM D892
Corrosion and Oxidation Stability	ASTM D4636 (Procedure 2); FTM 5308
Gum	IP 540
Dropping Point	ASTM D566; ASTM D2265

MCL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

U.S. ARMY – DEVCOM GROUND VEHICLE SYSTEMS CENTER

MATERIAL CHARACTERIZATION LABORATORY

6501 E. 11 Mile Road Building 200A, MS 267 Detroit Arsenal, MI 48397

	Performs the following types of tests on Metallic Materials and Elastomeric Material:
	Mechanical Scope Expires: 12/31/2022
	Technology	Range	Test Method
	Rockwell Hardness	Scales: A, B, C, 30N, 45N	ASTM E18
	Brinell Hardness	10/500, 10/1000, 10/1500, 10/3000	ASTM E10
	Microindentation Hardness	25 g, 50 g, 100 g, 200 g, 300 g, 500 g, 1000 g	ASTM E38
	Vickers, Knoop Hardness	25 g, 50 g, 100 g, 200 g, 300 g, 500 g, 1000 g, 2000 g	ASTM E92
	Notched Bar Impact	406 J
-80 °C	ASTM E23
	Tension Test	0.2 to 150 kN force 15 – 130 mm gage length	ASTM E8/E8M ASTM B557
	Durometer Hardness	Type A	ASTM D2240
	Tension Test	Test Method A

Up to 1kN Force

23°C to 150°C	ASTM D412
	Tension Test	Dumb-bell Type Specimens

Up to 1 kN Force

23 °C to 150°C	ISO 37
	Tear Test	Up to 1 kN Force
23 °C to 150°C	ASTM D62
	Abrasion Resistance	Rotary Drum Abrader	ASTM D5963
	Density Specific Gravity		ASTM D297 (Sec. 16.3) ASTM D792

VEA

SCOPE OF ACCREDITATION TO ISO/IEC 17020:2017

U.S. ARMY – CCDC GROUND VEHICLE SYSTEMS CENTER

VEHICLE ELECTRONICS AND ARCHITECTURE

EMC LABORATORY

6501 E. 11 Mile Road Bldg. 200C MS-224 Detroit Arsenal, Michigan 48397-5000 Performs the following electromagnetic compatibility and electrical tests on electronic equipment and subsystems

Electrical Scope Expires: 3/31/2023
Test	Test Method
Electromagnetic Compatibility
Emissions Conducted	MIL-STD-461F/G: CE102
Emissions, Radiated	MILL-STD-461F/G: RE102 (2 MHz to 18 GHz)
Conducted Susceptibility Power Leads Personnel Borne Electrostatic Discharge (ESD)	MIL-STD-461F/G: CS101 (30 Hz to 150 kHz)

MIL-STD-461G: CS118 (±500 V to ±30 KV)

File details come from the government source that posted it. Updated Aug 12, 2022.