Attachement 2 - SOR Spectrum Analyzer.pdf

CUI

STATEMENT OF REQUIREMENTS (SOR)

I - Description: Spectrum Analyzers

772 TS requires new spectrum analyzers to replace the current equipment which are over 15 years old and are reaching end of life. The spectrum analyzers are used during various phases of each test conducted in the anechoic chamber to verify the correct radio frequency (RF) signals are in the environment, check for undesired RF signals, and record sampled signals for follow-on analysis and reporting.

Summary of products from the quote which includes the spectrum analyzer itself, displays, hard drives, and additional hardware that the 772 TS will need to use the product in an optimal configuration:

Description Quantity Signal and Spectrum Analyzer 14 WXGA ((Wide Extended Graphics Array) Display 14 Precision frequency reference 14 Solid state drive (spare) 14 Removable hard drive 14 RF Preamplifier 14 Electronic Attenuator 14 CPU board 14

II - Technical capability requirement

Frequency Coverage: 50 KHz – 40 GHz Instantaneous / Analysis Bandwidth: 150 MHz – 1.5 GHz

Real time spectrum analysis of hopping and pulsed signals Precise SCPI record, playback, offboard storage and import of

SCIP scripts Data storage to a removable solid-state hard drive, purchase should include at least one primary and one spare solid state drive per unit.

Easy “security sanitize” / zeroize capability of any onboard volatile and non-volatile data storage memory

Recording of I&Q data >= 12 month calibration cycle Output to LAN, 1000BASE-T to 10‛s GBASE-T Display output to external monitor via HDMI required, HDMI and

Display outputs desired

III- Other Considerations

1. The squadron currently has a critical shortfall of engineering personnel and no available billets to assign dedicated personnel to develop scripts for these units. A built-in SCPI recorder is a KEY because it will enable our existing RF engineers to automatically generate the necessary code and execute the automated test environment (ATE) without requiring unavailable software development resources.

2. Work Stoppage / Schedule Failure: Without the automated SCPI recorder, the testing phase cannot proceed, as the command lacks the specialized software engineering personnel required to manually write the test scripts. Attempting to hire, contract, or reallocate software developers to this effort would cause an unacceptable schedule delay, will cause the program to miss its mandatory Initial Operational Capability (IOC) deadline.

IV- OMBUDSMAN

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes.

The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFTC Vice Commander 1 S Rosamond Blvd Edwards AFB CA 93524

COMM: (661) 277-2810

aftc.workflow@us.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

V - HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS

(a) In performing work under this contract on a Government installation, the contractor shall:

(1) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractors and Government personnel performing or in any way coming in contact with the performance of this contract; and

(2) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

(b) The contracting officer may, by written order, direct Department of the Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

(c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.

VI - CONTRACTOR ACCESS TO THE DEPARTMENT OF THE AIR FORCE

INSTALLATIONS

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Department of the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver‛s license, current vehicle registration, valid vehicle insurance certificate, and [insert any additional requirements to comply with local security procedures] to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with [insert any additional requirements to comply with AFI 31-101 , Integrated Defense, and DODMAN5200.02_AFMAN 16-1405 , Air Force Personnel Security Program] citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) The contractor shall provide an after-hours contact number or after-hours email in the Emergency Mass Notification System (EMNS) for each of their personnel, whose normal place of duty is on a DoD installation or within a DoD facility. The contractor shall comply with any additional requirements in DAFMAN 10-206 for emergency operational reporting. Foreign Nationals may participate and may remove themselves from the Emergency Mass Notification System at any time. To update information, personnel can access the globe icon on their system desktop screens and choose the “Access Self-Service” option.

(g) Failure to comply with these requirements may result in withholding of final payment.

VII - COMMON ACCESS CARDS (CAC) FOR CONTRACTOR PERSONNEL

(a) For installation(s)/location(s) cited in the contract, contractors shall ensure Common Access Cards (CACs) are obtained by all contract or subcontract personnel who meet one or both of the following criteria:

(1) Require logical access to Department of Defense computer networks and systems in either:

(i) the unclassified environment; or

(ii) the classified environment where authorized by governing security directives.

(2) Perform work, which requires the use of a CAC for installation entry control or physical access to facilities and buildings.

(b) Contractors and their personnel shall use the following procedures to obtain CACs:

(1) Contractors shall provide a listing of personnel who require a CAC to the contracting officer. The government will provide the contractor with instruction on how to complete the Contractor Verification System (CVS) application and then notify the contractor when approved.

(2) Contractor personnel shall obtain a CAC from the nearest Real Time Automated Personnel Identification Documentation System (RAPIDS) Issuing Facility (typically the local Military Personnel Flight (MPF)).

(c) While visiting or performing work on installation(s)/location(s), contractor personnel shall wear or prominently display the CAC as required by the governing local policy.

(d) During the performance period of the contract, the contractor shall:

(1) Within 7 working days of any changes to the listing of the contract personnel authorized a CAC, provide an updated listing to the contracting officer who will provide the updated listing to the authorizing government official;

(2) Return CACs in accordance with local policy/directives within 7 working days of a change in status for contractor personnel who no longer require logical or physical access;

(3) Return CACs in accordance with local policy/directives within 7 working days following a CACs expiration date; and

(4) Report lost or stolen CACs in accordance with local policy/directives.

(e) Within 7 working days following completion/termination of the contract, the contractor shall return all CACs issued to their personnel to the issuing office or the location specified by local policy/directives.

(f) Failure to comply with these requirements may result in withholding of final payment.