Attach A_2 P2209-CD PERMIT REV1 09-05-24.pdf

COVER SHEET

ARCHITECTURE PC

S A N D E R S

16125 RACCOON FORD RD

CULPEPER, VIRGINIA 22701

(v)540-829-2590

REVISIONS:

DATE:

CHECKED:

DRAWN:

SCALE:

PROJECT #:

DAS

08-13-24 2209A

FO

R

C O

N

ST

RU

C

TIO

N

A-CS.1

NOTED

EX

TE

RI

O

R D

O O

R

RE

PL

A

C

EM

EN

T

C

UL

PE

PE

R, V

IR

G

IN

IA

W

ES

T

C A

M

ER

O N

S

TR

EE

T

C O

UN

TY

O F

C

UL

PE

PE

R C

O

UR

TH

O

US

E

08-14-24

#1 - 09-05-24 PRE-BID MEET

CODE INFORMATION - 2021VEBC

2021 VCC REFERENCES SHOWN IN PARENTHESIS (000.0)

301.2 OCCUPANCY & USE PER VCC - NO CHANGE

404.2 ACCESSIBILITY COMPLY WITH VCC CHAPTER 11 AS

MODIFIED BY 404.3 & 404.4 UNLESS TECHNICALLY INFEASIBLE.

404.3 ACCESSIBLE ROUTE TO PRIMARY FUNCTION AREAS

REQUIRED

404.4.1 ENTRANCES - ALTERED ENTRANCES NOT

REQUIRED TO BE ACCESSIBLE. EXISTING ACCESSIBLE

ENTRANCES TO REMAIN.

404.4.13 THRESHOLD HEIGHT = 3/4" MAX.

601.2.1 LEVEL 1 ALTERATIONS (DOOR REPLACEMENT)

601.2.2 LEVEL 2 ALTERATIONS (IF DOORS ELIMINATED)

(305) BUILDING PLANNING

B COURTHOUSE BUSINESS USE

CONSTRUCTION TYPE: 2B

NO CHANGE PROPOSED TO USE, CONSTRUCTION TYPE, AREA

OR OCCUPANCY

SUMMARY OF WORK

THIS WORK INCLUDES REPLACEMENT OF EXISTING EXTERIOR

DOORS FOR REPAIRS AND SECURITY ENHANCEMENT.

1. CONTRACTOR MUST FIELD MEASURE THE EXISTING

DOORS, TRIM & SURROUNDING CONDITIONS AND

PROVIDE NEW DOORS AND TRIM THAT MATCH THE

ORIGINAL DOOR SIZES, HARDWARE, TRIM AND PROFILES.

SIZES SHOWN ON THIS PLAN ARE NOMINAL AND MUST BE

CAREFULLY FIELD MEASURED BEFORE FABRICATION.

VISITING THE SITE AND CONFIRMING EXISTING

CONDITIONS ARE A MANDATORY PART OF BIDDING

AND CONSTRUCTION FOR THIS WORK.

2. PROVIDE SHOP DRAWINGS & PRODUCT INFORMATION

FOR REVIEW OF ALL PROPOSED NEW DOORS,

HARDWARE AND MILLWORK. DOOR EX-5 WILL REQUIRE

TOWN ARCHITECTURAL REVIEW BOARD APPROVAL OF

PROPOSED MATERIALS AND PROFILES.

3. EXTENT OF EXTERIOR PAINTING SHALL INCLUDE ALL TRIM

& FRAMES AROUND DOOR & ANY TRANSOMS OR

PAINTED TRIM ABOVE DOORS TO NEAREST

SURROUNDING BRICK SURFACE . INTERIOR PAINTING

SHALL INCLUDE DOORS, FRAME & INTERIOR CASING TO

UNDISTURBED INTERIOR WALL SURFACE. U.N.O.,

PAINTING INTERIOR WALLS ARE NOT INCLUDED UNLESS

DISTURBED BY DOOR REPLACEMENT. IF INTERIOR WALLS

ARE DISTURBED, PAINT THE ENTIRE WALL AND TRIM TO

NEAREST ADJACENT WALL INTERSECTION.

BASE BID & ALTERNATES

CONTRACT BASE BID WORK INCLUDES ALL DEMOLITION & NEW CONSTRUCTION

REQUIRED TO MEET DESIGN INTENT. PRIOR TO SUBMITTING A BID, CONTRACTORS

MUST VISIT THE SITE AND OBSERVE & UNDERSTAND EXISTING CONDITIONS

INCLUDING ACCESS TO WORK, TIMING OF REPLACEMENT AND CONDITION OF

EXISTING ELEMENTS AS REQUIRED TO COMPLETE NEW WORK. CONTRACTOR MUST

MAINTAIN REQUIRED BUILDING EXITS AND COORDINATE WITH COURT SCHEDULE &

SHERIFF DEPARTMENT SECURITY AT ALL TIMES.

ADD ALTERNATE #1: TBD

WORK BY OTHERS

1. SECURITY, CARD READERS RELOCATION AND RE-INSTALLATION

2. ITEMS SPECIFICALLY IDENTIFIED AS "BY OTHERS" OR N.I.C.

DRAWING LIST

A-CS.1 COVER SHEET

A-A1.1 ALTERATION PLANS & SPECIFICATIONS

A-A1.2 DOOR SCHEDULE

A-A1.3 DOOR & WINDOW DETAILS

V

IC

IN

ITY

M A

P

IM

A G

E

SC

A

LE

N

O T

TO

S

C A

LE

@ AT

ABV. ABOVE

A.C.T. ACOUSTICAL CEILING TILE

A.F.F. ABOVE FINISHED FLOOR

ADJ. ADJUSTABLE

ALT. ALTERNATE

ALUM. ALUMINUM

ARCH. ARCHITECTURAL

B.F.F. BELOW FINISHED FLOOR

BSMT BASEMENT

BLK'G BLOCKING

B.O. BOTTOM OF

BOT. BOTTOM

BD BOARD

BLDG. BUILDING

C.T. CERAMIC TILE

CLG. CEILING

CLO. CLOSET

CMU CONCRETE MASONRY UNIT

CONC. CONCRETE

CONST CONSTRUCTION

DBL DOUBLE

DWG DRAWING

DTL. DETAIL

EX. EXISTING

E.C. ELECTRICAL CONTRACTOR

ELEC. ELECTRICAL

ELEV. ELEVATION

EQ. EQUIVALENT

EXP. EXPANSION

EXT. EXTERIOR

F.G. FIBERGLASS

F.F. FINISHED FLOOR

BRD. FINISH

FLR. FLOOR

FND. FOUNDATION

FRMG. FRAMING

FT. FOOT/FEET

FTG. FOOTING

G.C. GENERAL CONTRACTOR

GWB GYPSUM WALLBOARD

GA. GAUGE

GALV. GALVANIZED

HVAC HEATING, VENTILATION & AIR

CONDITIONING

HW HARDWARE

HDR. HEADER

HGT. HEIGHT

HORIZ. HORIZANTAL

INSUL. INSULATION

INT. INTERIOR

JAN. JANITOR

JT. JOINT

L.F. LINEAR FOOT

M.C. MECHANICAL CONTRACTOR

MR MOISTURE RESISTANT BOARD

MANUF. MANUFACTURED

MAX. MAXIMUN

MECH. MECHANICAL

MIN. MINIMUM

MTL. METAL

O.C. ON CENTER

PTD PAINTED

PL PLATE

P.C. PLUMBING CONTRACTOR

PSF PER SQUARE FOOT

PSI PER SQUARE INCH

P.T. PRESSURE TREATED

PERIM. PERIMETER

PLUMB. PLUMBING

R.O. ROUGH OPENING

RWC RAIN WATER CONDUCTOR

REINF. REINFORCED

REQ. REQUIRED

RESP. RESPONSIBLE

RET. RETURN

RM ROOM

S.F. SQUARE FEET

S.S.R STANDING SEAM ROOF

SCHED. SCHEDULE

STD. STANDARD

STL. STEEL

STOR. STORAGE

T&G TONGUE & GROOVE

TEMP. TEMPORARY

T.O. TOP OF

TYP. TYPICAL

U.G. UNDERGROUND

U.N.O. UNLESS NOTED OTHERWISE

VWC VINYL WALLCOVERING

VERT. VERTICAL

V.C.T. VINYL COMPOSITE TILE

W/ WITH

W/O WITHOUT

W.W.F. WELDED WIRE FABRIC

WD. WOODA

BB

RE

V

IA

TIO

N

S

ELEVATION

ELEVATION

SHEET WHERE ELEVATION

DRAWING NUMBER

DETAIL

SECTION

SHEET WHERE DETAIL

DRAWING NUMBER

SHEET WHERE SECTION

DRAWING NUMBER

MATCH LINE

COLUMN BUBBLES

WALL TYPE

ROOM NUMBER

KEYED NOTES

WINDOW TYPE

DOOR NUMBER

MATCH LINE

SEE 02/A2.03

IS LOCATED

IS LOCATED

IS LOCATED

AND GRID LINES

INDICATOR

G

EN

ER

A

L

SY

M

BO

LS

M A

TE

RI

A L

SY

M

BO

LS

BRICK

POROUS FILL

CONCRETE

CMU - CONCRETE

MASONRY UNIT

EARTH

STONE

METAL

FINISHED WOOD

GLASS

ACOUSTICAL TILE

GPDW - GYPSUM

BATT INSULATION

WALL BOARD

PLYWOOD

RIGID INSULATION

REVISION

ALL TRADES SHALL BE RESPONSIBLE FOR THE CONTENTS

CONTAINED HEREIN, AND FOR THE INFORMATION REPRESENTED

ON ALL SHEETS. THESE CONSTRUCTION DOCUMENTS HAVE BEEN

PRODUCED WITH THE INTENTION OF BEING USED AS A SINGULAR

TOOL FOR THE CONSTRUCTION OF THIS PROJECT. NO SINGLE

DRAWING WILL STAND ALONE, AND AT NO TIME WILL THE

ARCHITECT OR OWNER BE RESPONSIBLE FOR ACTIONS TAKEN BY

A CONTRACTOR OR SUBCONTRACTOR WHO HAS NOT

REVIEWED, AND IS NOT IN POSSESSION OF A FULL WORKING SET

OF DOCUMENTS. BE ADVISED, THERE MAY BE NOTES ON A

DRAWING FOR ONE SPECIFIC TRADE THAT WILL PERTAIN TO THE

WORK OF OTHER TRADES. GENERAL CONTRACTOR IS

RESPONSIBLE FOR THE CLEAR COMMUNICATION BETWEEN ALL

TRADES, AND THAT ALL WORKERS HAVE ADEQUATELY REVIEWED

ALL DRAWINGS AND LOCATED ALL WORK THAT WOULD FALL

UNDER THEIR RESPONSIBILITY.

NOTICE TO CONTRACTOR & ALL

TRADES

BUILDING PERMIT BY GENERAL CONTRACTOR.

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL TEMPORARY

SHORING, BRACING & WEATHER PROTECTION.

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL PROTECTION

AND BARRICADING OF PUBLIC AREAS AND NEIGHBORING

PROPERTIES

CONTRACTOR SHALL COMPLY WITH ALL PERTINENT RULES,

REGULATIONS, ORDINANCES, AND LAWS MANDATED BY LOCAL,

STATE, AND FEDERAL AGENCIES.

PRIOR TO CONSTRUCTION, EXAMINE ALL PROJECT

SPECIFICATIONS, DRAWINGS, AND VISIT THE SITE TO DEVELOP A

COMPLETE UNDERSTANDING OF THE PROJECT SCOPE. FAILURE

TO DO SO SHALL NOT RELIEVE THE CONTRACTOR OF HIS

RESPONSIBILITY TO PERFORM ALL WORK REQUIRED FOR A

COMPLETE INSTALLATION. UPON REVIEW OF THESE

DOCUMENTS, ADVISE THE ARCHITECT IN A TIMELY MANNER OF

ANY DISCREPANCIES WHICH WILL EFFECT THE WORK REQUIRED

SO THAT THE ARCHITECT MAY PROVIDE DIRECTION PRIOR TO

BEGINNING AFFECTED WORK.

GENERAL NOTES

COUNTY OF CULPEPER COURTHOUSE

EXTERIOR DOOR REPLACEMENT

CULPEPER COUNTY, VIRGINIA

BG-25-0301

SITE

N

PROJECT CONTACTS

OWNER

COUNTY OF CULPEPER

PAUL HOWARD

OWNER'S REPRESENTATIVE

540.727.3409

DAVIS MEANS - COUNTY OF

CULPEPER PROJECT MANAGER

540.219.3785

ARCHITECT

SANDERS ARCHITECTURE, PC

DEX SANDERS

540.829.2590

SECURITY SYSTEM VENDOR

CLARK SECURITY

JOSH CLARK

clarksecsvcs@yahoo.com

A

X X

06/A6.01

05/A1.02

/A

1.

G

A

RM#

AutoCAD SHX Text

AutoCAD SHX Text A

EW

C

EW

C

FD

FD

WH

D N

UP

CR

C R

C R

CR

C

RC

R

C R

C R

C R

CR

ALTERATION PLANS

& SPECIFICATIONS

ARCHITECTURE PC

S A N D E R S

16125 RACCOON FORD RD

CULPEPER, VIRGINIA 22701

(v)540-829-2590

REVISIONS:

DATE:

CHECKED:

DRAWN:

SCALE:

PROJECT #:

DAS

08-13-24 2209A

FO

R

C O

N

ST

RU

C

TIO

N

A-A1.1

NOTED

EX

TE

RI

O

R D

O O

R

RE

PL

A

C

EM

EN

T

C

UL

PE

PE

R, V

IR

G

IN

IA

W

ES

T

C A

M

ER

O N

S

TR

EE

T

C O

UN

TY

O F

C

UL

PE

PE

R C

O

UR

TH

O

US

E

08-14-24

#1 - 09-05-24 PRE-BID MEET

N

GROUND FLOOR KEY PLAN

SCALE: 1/16" = 1'-0"

2ND FLOOR KEY PLAN

SCALE: 1/16" = 1'-0"

3RD FLOOR KEY PLAN

SCALE: 1/16" = 1'-0"

EX-10

EX-9

EX-8

EX-7

EX-6EX-5 EX-4

EX-3

EX-2

EX-1

NEW STEEL DOORS, FIX TO

BE NON-OPERABLE

ADD EXIT SIGN W/ EGRESS

LIGHTS

NEW LIGHTED EXIT

SIGN

NEW BALLISTIC DOOR

& FRAME LEVEL 3 BALLISTIC PANEL

NEW LEVEL 5 DOORS

NEW LEVEL 3 DOORS

SPECIFICATIONS (CONT.)

08710 FINISH HARDWARE (SEE ALSO PROJECT MANUAL SECTION 08710)

1. PROVIDE FINISHED HARDWARE, COORDINATE WITH DOORS & FASTENERS TO COMPLETE THE WORK.

2. PROVIDE A PROPOSED HARDWARE SCHEDULE FOR REVIEW.

3. PROVIDE MANUFACTURER'S STANDARD WARRANTY (LENGTH VARIES) AS WELL A CONTRACTOR

WARRANTY THAT SHALL GUARANTEE ALL WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE

DATE OF PROJECT SUBSTANTIAL COMPLETION.

4. THRESHOLDS: DARK BRONZE FINISH ALUMINUM, PEMKO OR EQUAL, OFFSET, ADA COMPLIANT, SET IN

FULL SILICONE SEALANT BED AND INCLUDING MATCHING SILL SWEEP.

5. WEATHERSTRIPPING: SILICONE RUBBER, ALL AROUND FOR ALL DOORS.

6. HINGES: 5 KNUCKLE, PERMANENTLY LUBRICATED, WITH CHROME ALLOY BALL BEARING ASSEMBLIES, ANSI GRADE 1.

7. PIANO HINGES: CONTINUOUS 0.12 MIN. THICKNESS TYPE 304 STAINLESS STEEL RUN FULL LENGTH OF

DOOR.

8. PUSH / PULL: 0.050" ALUMINUM, 3-1/2" x 15" PUSH & 3/4" ROUND BAR, 12" LENGTH, 2-1/4"

PROJECTION.

9. KICKPLATES: BRUSHED NICKEL FINISH

10. EXIT DEVICE: PUSHPAD TYPE, HARDENED STEEL LATCHES, CONCEALED MOUNTING

11. CLOSERS: BRUSHED NICKEL FINISH, COMMERCIAL GRADE, LCN OR APPROVED EQUAL, CERTIFIED TO

EXCEED 10,000,000 FULL LOAD CYCLES, ADA ADJUSTABLE, (10) YEAR WARRANTY, FULL HYDRAULIC, RACK AND PINION ACTIONS, ADJUSTABLE FOR BACKCHECK, SPEED AND LATCH SPEED, HEX

WRENCH ADJUSTABLE, ALUMINUM FINISH

12. LOCKSETS: FORGED CAST BRASS, FULL RETURN LEVER TRIM, SARGENT 11 LINE WITH SARGENT XC

LARGE FORMAT IC KEYING SYSTEM, INTERCHANGEABLE CORE, CYLINDER BY OWNER.

13. KEYING BY OWNER.

14. INSTALL HARDWARE IN COMPLIANCE WITH MANUFACTURER'S INSTRUCTIONS AND

RECOMMENDATIONS.

09200 GYPSUM BOARD ASSEMBLIES

1. PROVIDE COMPLETE GYPSUM BOARD ASSEMBLIES AS INDICATED FOR NEW WORK. INSTALL

GYPSUM BOARD PANELS VERTICALLY ALONG STUDS IN CONTINUOUS PANELS TO DECREASE BUTT

JOINTS WHERE POSSIBLE.

2. FINISH GYPSUM BOARD SO THAT SEAMS & SCREW LOCATIONS ARE NOT VISIBLE AFTER PAINT FINISH

IS APPLIED.

3. WHERE GYPSUM BOARD MEETS CMU WALLS, FRAMES OR OTHER STRUCTURE, PROVIDE A CONT.

METAL J-BEAD OR ZIP BEAD EDGE WITH A FLEXIBLE SEALANT FILLER.

09900 PAINTING

1. PREPARE ALL SURFACES FOR COATINGS & APPLY COATINGS AS RECOMMENDED BY THE MFG.

SPECIFICATIONS BELOW BASED ON SHERWIN-WILLIAMS. NOTE THAT EXPOSED ALUM., BRASS,

CHROME, STAINLESS STEEL, ETC. TO BE LEFT UNFINSHED. DO NOT PAINT OVER TAGS & LABELS.

2. NO SPRAY APPLICATION OF PAINT

3. EXTENT OF COATING IN CONTRACT INCLUDES: EXTERIOR TRIM & DOORS. PAINT INTERIOR FERROUS

METALS - METAL DOORS & FRAME. ALL NEW EXPOSED GYPSUM DRYWALL SURFACES, DOORS AND

TRIM.

4. PRIOR TO APPLICATION OF ANY COATING, PAINTING CONTRACTOR WILL EXAMINE THE SUBSTRATE

TO BE COATED. APPLICATION OF PAINT DEMONSTRATES PAINTING CONTRACTOR'S ACCEPTANCE

OF SUBSTRATE.

5. PAINT CONTRACT SHALL INCLUDE MATCHING THE EXISTING TRIM, WALL AND DOOR COLORS.

6. APPLY COATING TO FINISH THICKNESS RECOMMENDED BY COATING MFG. OWNER SHALL

DOCUMENT PRIME COAT APPLICATION. NO FINISH COAT APPLICATION SHALL START UNTIL PRIME

COAT IS DOCUMENTED. A MINIMUM OF A PRIME COAT AND (2) FINISH COATS ARE REQUIRED.

ADDITIONAL COATS ARE REQUIRED IF FULL COVERAGE IS NOT OBTAINED.

SPECIFICATIONS

GENERAL NOTES:

1. ALL ITEMS & SYSTEMS TO BE INSTALLED AS RECOMMENDED BY THE MANUFACTURER AND IN

CONFORMANCE WITH APPLICABLE BUILDING CODES, LAWS AND REGULATIONS.

2. UNLESS "NO SUBSTITUTIONS" IS SPECIFICALLY INDICATED, IT IS NOT THE INTENT OF THESE

SPECIFICATIONS TO EXCLUDE MANUFACTURERS THAT PRODUCE EQUAL PRODUCTS OR SYSTEMS.

CONTRACTOR IS ENCOURAGED TO SUBMIT ALTERNATE PRODUCT OR SYSTEM MANUFACTURERS FOR

CONSIDERATION BY ARCHITECT PRIOR TO BID / ORDER.

3. CONTRACTOR SHALL DAILY REMOVE ALL DEBRIS FROM SITE AND KEEP WORK AREA CLEAN.

REMOVE EXCESS MATERIALS FROM SITE. TOWN OF CULPEPER PERMITS WILL BE REQUIRED FOR

DUMPSTER AND CONSTRUCTION PARKING. CONTRACTOR MUST MAINTAIN SAFE ACCESS & EGRESS

AT ALL TIMES.

4. FOLLOWING CONTRACT AWARD, SUBMIT PROPOSED COLOR CHARTS & SAMPLES FOR ALL

REQUIRED COLOR SELECTIONS TO ARCHITECT FOR SELECTION & SCHEDULE. MANUFACTURER'S

PRINTED COLOR CHARTS FOR PAINTED ITEMS OR PHYSICAL SAMPLES ARE REQUIRED. PAGES

PRINTED FROM WEBSITES OR LINKS TO WEBSITES ARE NOT ACCEPTABLE.

5. SUBMITTAL INFORMATION REQUIRED FOR ALL SECTIONS LISTED IN THE SCHEDULE THIS SECTION.

6. CONTRACTOR SHALL MAKE APPLICATION AND OBTAIN ALL PERMITS REQUIRED FOR THE EXECUTION

OF THIS WORK. U.N.O. ALL PERMIT FEES WILL BE PAID BY THE CONTRACTOR.

7. CONTRACTOR MUST OBTAIN PERMITS FROM THE TOWN OF CULPEPER FOR PARKING, STREET

CLOSURE, DUMPSTERS, DELIVERIES, ETC.

8. CONTRACTOR MUST COORDINATE ALL WORK WITH COURTHOUSE OPERATIONS AND SCHEDULE.

NOT ALL WORK MAY BE ABLE TO BE ACCOMPLISHED DURING REGULAR WORKING HOURS AND

DAYS. ANY QUESTIONS REGARDING WORK COORDINATION OR HOURS SHOULD BE ADDRESSED AT

THE PRE-BID MEETING.

07900 CAULKING & SEALANTS

1. TYPICAL PRODUCTS SHALL BE DOW CORNING - 790 OR GE SILICONE SILPRUF 2000 WEATHERING

SEALANT.

2. PROVIDE PAINTABLE SEALANT AT ALL INTERIOR & EXTERIOR TRIM AND CASING.

3. PROVIDE CLEAR, FLEXIBLE EXTERIOR SILICONE SEALANT UNDER & AROUND EXTERIOR DOOR

THRESHOLDS.

08110 STEEL DOOR & FRAMES

4. STEEL FRAMES TO BE SHOP PRIMED 16 GA. GALVANIZED STEEL WITH HARDWARE FACTORY CUT &

FULLY WELDED SEAMS WITH ALL WELDS GROUND SMOOTH. PROVIDE (3) JAMB ANCHORS PER

JAMB & ANCHOR TO FLOOR. FACTORY PRIMED PAINT. PROVIDE CONT. HEADER ABOVE DOORS.

5. FIELD VERIFY WALL THICKNESS AND ROUGH OPENINGS. VERIFY THICKNESS OF ALL EXISTING DOORS

WHERE EXISTING FRAMES ARE TO REMAIN.

6. INSTALL DOOR & FRAME SQUARE, PLUMB & LEVEL SO DOORS OPEN AND CLOSE WITH EASE.

7. STEEL DOORS TO BE 16 GA, FULLY WELDED, SEAMLESS EDGES, INSULATED POLYSTYRENE CORE, RAISED PANEL AS INDICATED, REINFORCED FOR CLOSERS & OTHER HARDWARE. FACTORY PRIME

FINISHED READY FOR FIELD PAINT. EQ. TO ASSA ABLOY BARON HIGH DEFINITION 2 PANEL

EMBOSSED DOORS.

8. BULLET RESISTANT DOORS TO BE MINIMUM 16 GA., FULLY WELDED SEAMLESS EDGE, INSULATED

POLYSTYRENE CORE, WITH APPLIED MOLDING & BALLISTIC GLASS TO MATCH EXISTING DOOR

PROFILES BEARING THE U.L. 762 BALLISTIC RATING INDICATED AS MANUFACTURED BY TOTAL

SECURITY SOLUTIONS (517)-223-7807 OR EQ. REINFORCE FOR CLOSERS & OTHER HARDWARE,

FACTORY PRIME READY FOR FIELD PAINT WITH CUSTOM APPLIED MOLDING.

SPECIFICATIONS (CONT.)

PAINTING SCHEDULE:

INTERIOR GYPSUM DRYWALL:

1st Coat: SW Pro-Mar 200 Zero VOC Interior Latex Primer 2nd Coat: SW Pro-Mar 200HP Zero VOC Acrylic 3rd Coat: SW Pro-Mar 200HP Zero VOC Acrylic

INTERIOR HISTORIC PLASTER / gypsum patched:

1st Coat: Keim Mineral Primer 2nd Coat: Keim Innostar Mineral sol silicate 3rd Coat: Keim Innostar Mineral sol silicate

NOTE: APPLY SEMI-GLOSS FINISH TO ALL PAINTED DOORS & TRIM

INTERIOR FERROUS METALS:

Group A: All interior metal not pre-finished and in particular: door jambs, steel doors and frames, etc.

Primer: Factory primer or SW Pro-Cryl Universal Acrylic Primer 2nd Coat: SW Pro-Mar 100HP Zero VOC Acrylic 3rd Coat: SW Pro-Mar 100HP Zero VOC Acrylic

EXTERIOR FERROUS METALS:

Primer: Factory or SW ProCryl Universal Acrylic Primer 2nd Coat: SW Pro Industrial Urethane Alkyd Enamel 3rd Coat: SW Pro Industrial Urethane Alkyd Enamel

GALVANIZED METAL: same as for ferrous metals above.

PAINTED WOOD WORK:

1st Coat: SW Pro-Mar 100 Zero VOC Interior Latex Primer 2nd Coat: SW Pro-Mar 100HP Zero VOC Acrylic Semi-gloss 3rd Coat: SW Pro-Mar 100HP Zero VOC Acrylic Semi-gloss

NOTE:FULLY SAND & PREP EXISTING OIL BASED PAINTED SURFACES FOR NEW ACRYLIC COATING AS

RECOMMENDED BY MFG.

SUBMITTAL SCHEDULE

SUBMIT SHOP DRAWINGS & PRODUCT INFORMATION IN PDF FORMAT EXCEPT FOR PHYSICAL SAMPLES.

SUBMIT (3) PHYSICAL SAMPLES - (1) ARCHITECT, (1) OWNER & (1) RETURN TO CONTRACTOR.

COMBINE MULTIPLE PDF DOCUMENTS INTO ONE PDF DOCUMENT FOR REVIEW FOR EACH DIVISION.

08110 STEEL DOORS & FRAMES

08710 DOOR HARDWARE SCHEDULE

09900 PAINTING (COLOR SAMPLES)

10425 EXTERIOR SIGNAGE (COLOR CHART)

REPLACE EX. HANDRAIL WITH NEW TO

MATCH EX. PROFILE & HEIGHTSUMMARY OF WORK IN EXISTING STAIRWAY:

FLOOR - NEW 18"x18" ARMSTRONG UNIFY LVT TILE

STAIR -NEW 1/8" RUBBER NON-SLIP TREADS & SMOOTH RISERS

BASE - 4" RUBBER

WALLS - REPAIR EXISTING PLASTER WITH MATCHING PLASTER & RE-PAINT

ALL WALLS, TRIM & WINDOWS

REMOVE UN-USED CONDUIT & WIREMOLD

CEILING - NEW ARMSTRONG 15/16" PRELUDE GRID & DUNE TEGULAR 2X2X5/8 ACT

REMOVE EX. LIGHT FIXTURE NEW 4'

LED WALL MTD. INDIRECT LIGHT

ELECTRIC STRIKE TIED TO

FIRE ALARM / SECURITY

DOOR LOCK TIED TO

FIRE ALARM & SECURITY NEW EXIT SIGN

W/ "EMERGENCY EXIT

ONLY SIGN BELOW"

ADD SUSPENDED EXIT SIGN W/

ARROWS EA. FACE - FEED FROM

EX. LIGHT CIRCUIT ABOVE

NEW 3M SECURITY

FILM (7) TYPICAL

NEW 3M

SECURITY FILM

BALLISTIC

PANEL INFILL

BALLISTIC PANEL

INFILL

01/A-A1.3

NEW STEEL DOOR

EXISTING DOORS

TO REMAIN

NEW STEEL DOORS

NEW STEEL DOORS

NEW STEEL

DOOR

NEW STEEL DOOR W/

HALF GLASS & CLEAR

3M IMPACT FILM

DOOR SCHEDULE

ARCHITECTURE PC

S A N D E R S

16125 RACCOON FORD RD

CULPEPER, VIRGINIA 22701

(v)540-829-2590

REVISIONS:

DATE:

CHECKED:

DRAWN:

SCALE:

PROJECT #:

DAS

08-13-24 2209A

FO

R

C O

N

ST

RU

C

TIO

N

A-A1.2

NOTED

EX

TE

RI

O

R D

O O

R

RE

PL

A

C

EM

EN

T

C

UL

PE

PE

R, V

IR

G

IN

IA

W

ES

T

C A

M

ER

O N

S

TR

EE

T

C O

UN

TY

O F

C

UL

PE

PE

R C

O

UR

TH

O

US

E

08-14-24

#1 - 09-05-24 PRE-BID MEET

DOOR IMAGE EX-3

SCALE: N.T.S.

EX-3 INTERIOR

EX-3 EXTERIOR

DOOR IMAGE EX-4

SCALE: N.T.S.

DOOR IMAGE EX-6

SCALE: N.T.S.

DOOR IMAGE EX-5

SCALE: N.T.S.

DOOR IMAGE EX-7

SCALE: N.T.S.

EX-4 INTERIOR

EX-4 EXTERIOR

EX-7 INTERIOR

EX-7 EXTERIOR

EXTERIOR

EX-5 EXTERIOR

DOOR IMAGE EX-9

SCALE: N.T.S.

EX-9 INTERIOR

DOOR IMAGE EX-8

SCALE: N.T.S.

EX-8 EXTERIOR

DOOR IMAGE EX-10

SCALE: N.T.S.

EXTERIOR

RE-GLAZE (PUTTY) EXISTING

TRANSOM WINDOW

GLASS TO REMAIN

EX. FRAME & TRIM TO

REMAIN - PREP, CAULK &

PAINT ALL AROUND

NEW UL 752 LEVEL 3 DOOR W/

LEVEL 3 GLASS IN EX. WD JAMB

RE-USE EX. LOCKSET

EX. CARD READER TO REMAIN

REMOVE EX. SIGN

NO SIGN ON NEW GLASS

REMOVE EX. SIGN

PROVIDE NEW DOOR WITHOUT

MAILSLOT

NEW THRESHOLD OVER EX.

STL. PL TO REMAIN (PAINT)

NEW GRADE 1 CLOSER

REMOVE & REPLACE EX.

MAG LATCH (BY OTHERS)

NEW PIANO HINGE

SEE J2/A-A1.3

NEW KICKPLATES

EXISTING FRAME & TRIM

TO REMAIN - PREP & RE-PAINT

FIXED LEAF W/ HEAD

& FOOT BOLTS

WR MEADOWS MEADOW-PATCH T2

FROM TOP OF STL. PLATE TO START OF

DECK - SLOPE AWAY FROM DOOR

RE-GLAZE (PUTTY) EXISTING

TRANSOM WINDOW

GLASS TO REMAIN

EX. TRIM TO REMAIN - PREP,

CAULK & PAINT ALL AROUND

NEW FIXED / INOPERABLE STEEL DOOR W/

11/16" INSUL. TEMPERED GLASS. PROVIDE

DARK OPAQUE FILM ON INSIDE OF GLASS

NO LOCKSET - FIXED DOOR PANELS

ONLY

NEW THRESHOLD

MINIMUM LEVEL 3 BALLISTIC DOOR IN EXISTING FRAMEMINIMUM LEVEL 3 BALLISTIC FIXED FENESTRATIONLEVEL 3 BALLISTIC OPERABLE DOOR & FRAMELEVEL 5 BALLISTIC OPERABLE DOOR IN EX. FRAME

DOOR IMAGE EX-2

SCALE: N.T.S.

EX-2 EXTERIOR

PREP, CAULK & RE-PAINT TRIM

ALL AROUND

REMOVE EX. BRICK MOULD

FROM SILL TO THIS POINT

EA. SIDE

NEW HM FRAME BEHIND

NEW MATCHING BRICK MOULD

NEW INTERIOR TURN

KEYED DEADBOLT

NEW PULL

REMOVE PIANO HINGE,

REPLACE WITH (3) HINGES

THRESHOLD TO REMAIN

REMOVE STOP - NEW HM

FRAME W/ WD TRIM TO MATCH

BRICK MOLD THICKNESS

FIXED LEAF W/ ASTRAGAL,

HEAD & FOOT BOLTS

REMOVE EXISTING SIGN

DOOR REPLACEMENT SCHEDULE

EX-1 EXISTING ENTRANCE DOORS TO REMAIN

EX-2 REPLACE EXISTING STEEL DOOR WITH NEW STEEL 2-PANEL HALF

GLASS DOOR & HOLLOW METAL FRAME. PROVIDE NEW GRADE 1

CLOSER, (3) SS HINGES, KICKPLATE, PUSH PLATE AND PULL W/ INTERIOR

TURN KEYED DEADBOLT. COUNTY WILL DISCONNECT & RE-INSTALL MAG

LATCH & ACCESS CONTROL. EXISTING THRESHOLD TO REMAIN. SEE JAMB

DETAIL "J1" AND DOOR TYPE "A" SHEET A-A1.3.

EX-3 REPLACE EXISTING PR. 27-1/2" x 79" WOOD DOORS WITH NEW

UL 752 LEVEL 3 PAIR STEEL DOORS WITH LEVEL 3 GLASS AND APPLIED

MOULDINGS IN EXISTING WOOD FRAME. PROVIDE NEW GRADE 1

CLOSER, PIANO HINGES, KICKPLATE, HEAD & FOOT BOLTS ON FIXED LEAF,

AND THRESHOLD. REUSE EX. LOCKSET. SEE JAMB DETAIL "J2" AND DOOR

TYPE "D" SHEET A-A1.3.

EX-4 REPLACE EXISTING PR. 27-1/2" x 79" WOOD DOORS WITH NEW

FIXED, NON-OPERABLE, STEEL DOORS WITH INSULATED TEMPERED GLASS

AND APPLIED MOULDINGS IN EXISTING WOOD FRAME. PROVIDE NEW

THRESHOLD. REMOVE LOCKSET & SIGNAGE. SEE JAMB DETAIL "J3",

THRESHOLD DETAIL "T3" AND DOOR TYPE "D" SHEET A-A1.3.

EX-5 REPLACE EXISTING PR. 3'-0" x 8'-6"± WOOD DOORS WITH NEW

UL 752 LEVEL 3 PAIR STEEL DOORS WITH APPLIED MOULDING IN NEW

HOLLOW METAL FRAME. COORDINATE DOOR & FRAME THICKNESS.

PROVIDE NEW GRADE 2 CLOSER, (4) HINGES PER LEAF, HEAD & FOOT

BOLTS ON FIXED LEAF, 5" THRESHOLD, AND INTERIOR TURN KEYED

DEADBOLT. RE-USE EXISTING SURFACE MOUNTED HISTORIC LOCKSET &

HANDLES. PROVIDE SHOP DRAWINGS AND MATERIAL SAMPLES FOR

REVIEW AND APPROVAL BY ARCHITECTURAL REVIEW BOARD PRIOR TO

ORDERING. SEE JAMB DETAIL "J4" AND DOOR TYPE "C" SHEET A-A1.3.

EX-6 REPLACE EXISTING WOOD DOOR WITH NEW STEEL DOOR WITH

INSULATED TEMPERED GLASS AND APPLIED MOULDINGS IN EXISTING

WOOD FRAME. GLASS TO HAVE CLEAR 3M IMPACT RESISTANT FILM.

PROVIDE NEW GRADE 1 CLOSER, (3) SS HINGES, KICKPLATE, THRESHOLD,

LEVER LOCKSET, PANIC EXIT DEVICE. DOOR TYPE "D" SHEET A-A1.3.

NO BALLISTIC RATING

SEE SHEET J3/A-A1.3 FOR BALLISTIC

PANEL ENCLOSURE OVER NEW

DOORS TO BOTTOM OF TRANSOM

NEW FIXED METAL DOORS

EXISTING TRANSOM

WINDOW TO REMAIN

RE-GLAZE (PUTTY) EXISTING

TRANSOM WINDOW

GLASS TO REMAIN

EX. TRIM & FRAME TO

REMAIN - PREP, CAULK &

PAINT ALL AROUND

NEW STEEL DOOR IN EX.

WOOD FRAME

(3) NEW HINGES

NEW LOCKSET

& STRIKE PLATE

REMOVE EXISTING

SIGNAGE (TYP)

NEW 5" THRESHOLD

DOOR REPLACEMENT SCHEDULE (CONTINUED)

EX-7 REPLACE EXISTING PR. 27-1/2" x 79" WOOD DOORS WITH

NEW UL 752 LEVEL 5 PAIR STEEL DOORS WITH LEVEL 5 GLASS AND

APPLIED MOULDINGS. PROVIDE NEW GRADE 2 CLOSER, PIANO HINGES,

KICKPLATE, HEAD & FOOT BOLTS ON FIXED LEAF, AND THRESHOLD.

REUSE EX. LOCKSET. SEE JAMB DETAIL "J2" AND DOOR TYPE "D" SHEET

A-A1.3.

EX-8 REPLACE EXISTING PR. 2'-0" x 6'-6"± x 1-3/4" WOOD DOORS

WITH NEW PAIR STEEL 2-PANEL DOOR WITH INSULATED LAMINATE GLASS.

MATCH EXISTING DOOR SIZE & PROFILE. NO CLOSER. PROVIDE NEW(3)

SS HINGES, KICKPLATES, LEVER LOCKSET, HEAD & FOOT BOLTS ON FIXED

LEAF AND THRESHOLD.

EX-9 REPLACE EXISTING PR. 2'-0" x 6'-6"± x 1-3/4" WOOD DOORS

WITH NEW PAIR STEEL 2-PANEL DOOR WITH INSULATED LAMINATE GLASS.

MATCH EXISTING DOOR SIZE & PROFILE. NO CLOSER. PROVIDE NEW (3)

SS HINGES, KICKPLATES, LEVER LOCKSET, HEAD & FOOT BOLTS ON FIXED

LEAF AND THRESHOLD.

EX-10 REPLACE EXISTING WOOD DOOR WITH NEW STEEL 2-PANEL

DOOR & HOLLOW METAL FRAME. PROVIDE NEW GRADE 2 CLOSER, (3)

SS HINGES, KICKPLATE, LEVER LOCKSET, PANIC EXIT DEVICE, AND

THRESHOLD. COUNTY WILL DISCONNECT & RE-INSTALL MAG LATCH &

ACCESS CONTROL. SEE JAMB DETAIL "J1" AND DOOR TYPE "D" SHEET

A-A1.3.

RE-GLAZE (PUTTY) EXISTING

TRANSOM WINDOW

GLASS TO REMAIN

EX. TRIM TO REMAIN - PREP,

CAULK & PAINT ALL AROUND

NEW UL 752 LEVEL 5 DOOR W/

LEVEL 5 GLASS IN EX. WD JAMB

RE-USE EX. LOCKSET

EX. CARD READER TO REMAIN

REMOVE EX. SIGN

NO SIGN ON NEW GLASS

NEW THRESHOLD

FIXED LEAF W/ ASTREGAL,

HEAD & FOOT BOLTS

NEW GRADE 2 CLOSER

REMOVE & REPLACE EX.

MAG LATCH (BY OTHERS)

REMOVE EX. HINGES &

PROVIDE NEW PIANO

HINGES, SEE J2/A-A1.3

NEW 6" HIGH KICKPLATES TO FIT.

EXISTING FRAME & TRIM TO

REMAIN - PREP & PAINT

FIXED LEAF W/ HEAD

& FOOT BOLTS

NO BALLISTIC RATING

EX. TRIM TO REMAIN - PREP,

CAULK & PAINT ALL AROUND

FIELD VERIFY EX.

THRESHOLD CONDITION

PROVIDE NEW

LEVER LOCKSET

SECURITY TO BE REMOVED

& RE-INSTALLED BY OWNER

(TYP)

REMOVE EX. DOOR,

HINGES THRESHOLD &

WOOD BRICK MOULDING -

SEE DETAIL J1 / A-A1.3

NEW THRESHOLD

NEW STEEL DOOR AND

HOLLOW METAL FRAME

REMOVE & REPLACE

DOOR NUMBER

REMOVE EX. SIGNS

NEW LEVER LOCKSET

MINIMUM LEVEL 3 BALLISTIC DOOR IN EXISTING FRAMEMINIMUM LEVEL 3 BALLISTIC FIXED FENESTRATION

EX-5 INTERIOR

LEVEL 3 BALLISTIC OPERABLE DOOR & FRAMELEVEL 5 BALLISTIC OPERABLE DOOR IN EX. FRAME

NO BALLISTIC RATING

INSUL. GLASS W/ 3M IMPACT

SECURITY FILM

NEW UL 752 LEVEL 3 DOOR W/

LEVEL 3 GLASS IN NEW

HM FRAME - SEE J4/A-A1.3

REMOVE & REINSTALL

ORIGINAL OPERABLE

HARDWARE

NEW SIGN TO MATCH EX.

REMOVE & REPLACE

DOOR NUMBER

LEVEL 3 BALLISTIC GLASS

PREP, CAULK & RE-PAINT

ALL WOOD WITHIN BRICK

NEW GRADE 2 CLOSER

TRIM EX. CASING FOR

NEW HM FRAME - SEE

DET. J4/A-A1.3

EX-9 SIMILAR

EX-8 SIMILAR

NO BALLISTIC RATING

NO BALLISTIC RATING

REMOVE EX. SIGN

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REINSTALL

ORIGINAL OPERABLE

HARDWARE

NEW THRESHOLD

PROTECT EX. CARPET

REPLACE SQ. IF DAMAGED EXISTING FRAME & TRIM

TO REMAIN - PREP & PAINT

DOOR NOTES:

1. ALL DOORS, EXCEPT EX-5 (HISTORIC FRONT) AND EX-4

(NON-OPERABLE), TO HAVE NEW KICKPLATES.

2. ALL EXISTING TRANSOM WINDOWS TO BE INSPECTED AND

RE-GLAZED (WITH PUTTY) AS NEEDED USING EXISTING GLASS.

3. ALL EXISTING WOODEN DOORS WILL BE REMOVED, PROTECTED,

AND STORED IN A SECURE, DRY, USER-SPECIFIED LOCATION.

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE

DOOR NUMBER

REMOVE

DOOR NUMBER

NO LOCKSET - FIXED DOOR PANELS

ONLY

REMOVE & REPLACE

DOOR NUMBER

ASTRAGAL

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE

DOOR NUMBER

SECURITY TO BE REMOVED

& RE-INSTALLED BY OWNER

(TYP) SECURITY TO BE REMOVED &

RE-INSTALLED BY OWNER (TYP)

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE EX.

DOORS

EX. TRIM TO REMAIN - PREP,

CAULK & PAINT ALL AROUND

FIELD VERIFY EX.

THRESHOLD CONDITION

PROVIDE NEW

LEVER LOCKSET

INSUL. GLASS W/ 3M IMPACT

SECURITY FILM

REMOVE & REPLACE

DOOR NUMBER

REMOVE & REPLACE EX.

DOORS

RE-USE EX. PTD. STL.

SECURITY MESH

REMOVE & REPLACE EX. STL.

SECURITY MESH

APPLIED MOLDING ON NEW DOOR

APPLIED MOLDING ON NEW DOOR

APPLIED MOLDING ON

NEW DOOR TO MATCH EX.

APPLIED MOLDING ON

NEW DOOR

NO SIGN

REMOVE SIGN

REMOVE EX. SIGN

DOOR & WINDOW

DETAILS

ARCHITECTURE PC

S A N D E R S

16125 RACCOON FORD RD

CULPEPER, VIRGINIA 22701

(v)540-829-2590

REVISIONS:

DATE:

CHECKED:

DRAWN:

SCALE:

PROJECT #:

DAS

08-13-24 2209A

FO

R

C O

N

ST

RU

C

TIO

N

A-A1.3

NOTED

EX

TE

RI

O

R D

O O

R

RE

PL

A

C

EM

EN

T

C

UL

PE

PE

R, V

IR

G

IN

IA

W

ES

T

C A

M

ER

O N

S

TR

EE

T

C O

UN

TY

O F

C

UL

PE

PE

R C

O

UR

TH

O

US

E

08-14-24

#1 - 09-05-24 PRE-BID MEET

DOOR TYPES

SCALE: 1/4" = 1'-0"

A

DOOR EX-2

PTD WD TRIM ON HM FRAME

6' -1

0"

3'-43 4"

NEW INSUL. STEEL PANEL

DOOR

PTD. WD BRICK MOULD

OVER HM FRAME

DOOR DETAILS

SCALE: 1-1/2" = 1'-0"

1'-4"

4"

NEATLY CUT BACK

EX. JAMB EXTENSION ALL AROUND

SEAL & RE-PAINT

EX. CASING TO REMAIN

SINGLE RABBET HM FRAME

(3) JAMB ANCHORS PER SIDE

EX. CMU

BRICK

NEW MATCHING PTD.

WD BRICK MOULDING

SEALANT ALL AROUND

NEW 2" 16. GA. HM FRAME

CUT BACK EX. JAMB

THRESHOLD BELOW

J1 J2

EX. BRICK

PREP, CAULK AND PAIN EX. TRIM

NEW DARK BRONZE ALUM. ADA THRESHOLD

BELOW (EX. THRESHOLD TO REMAIN EX-7)

CONT. PIANO HINGE

NEW BALLISTIC DOOR

EX. CASING TO REMAIN

PLASTER

B

DOOR EX-4

EXTERIOR INTERIOR

4'-2"

6' -8

2"x2" SS CONT. ADHESIVE

CORNER GUARD ON

NEW GWB

2X4 STUD @ 16"OC

PTD GWB OVER BALLISTIC PNL.

ALIGN TOP NEW GWB W/

TOP DOOR HEAD CASING

TRANSOM TO REMAIN

NEW DOOR BEYOND

PTD BASE TO MATCH EX.

J3

T3

DOOR EX-2 DOOR EX-3

DOOR EX-4

EX. WALL

ZIP BEAD & SEALANT ALL AROUND

CORNER GUARD OVER

MTL. CORNER BEAD

2X4

1/2" GWB OVER UL 752 LEVEL 3

CONT. BALLISTIC PANEL

EQ. TO ARMORCORE NOM. 7/16" THICKNESS

ON 2X4 @ 16" OC MAX.

EX. CASING TO REMAIN

NEW DOOR EX. WOOD TRIM - PREP, CAULK & PAINT

EX. BRICK

PEMKO 2008 SERIES DARK BRONZE OFFSET

THRESHOLD SET IN SILICONE SEALANT BED

SEAL NEW DOOR ALL AROUND

PTD. WD BASE & SHOE

TO MATCH EX.

NEW INSUL. DOOR2X4 FLAT

2X2 PT SILL PL

C

DOOR EX-5

EXTERIOR

J4

EX. PLASTER WALL

EX. WOOD TRIM - PREP, CAULK & PAINT

EX. BRICK

NEW PTD. STL. BALLISTIC DOOR

W/ TRIM #1 APPLIED

MOLDINGS

DOOR EX-7 SIM.

EXISTING WD CASING

CUT BACK FOR NEW HM

FRAME

(4) - 4" EMBED EPOXY JAMB ANCHORS

NOTE: EX. BRICK IS SOFT - CAREFULLY DRILL, CLEAN

& SET ANCHORS. ALLOW TO HARDEN BEFORE

SETTING DOORS

DOOR EX-10 SIMILAR

DOOR EX-10 SIMILAR

IF NEW DOOR IS THICKER

THAN EXISTING,

NEATLY CUT OUT EX.

JAMB

CLEAR BALLISTIC GLASS

EX. WD CASING TO REMAIN

CUT BACK EX. WOOD TRIM FOR NEW

CUSTOM HM FRAME SET FLUSH WITH TRIM

SEAL ALL AROUND

NEW THRESHOLD BELOW

6"

13 4"

NEATLY SAW-CUT EX. CASING

FOR NEW HM FRAME

SEAL ALL AROUND

NEW BALLISTC DOOR

8' -6

1 2"

6'-0"

VER.

PTD. HM FRAME

JDR COURTROOM WINDOW SECTION01 SCALE: 1-1/2" = 1'-0"

EX. WINDOW TO REMAIN

REMOVE INTERIOR HARDWARE

EX. STN. WD PNL. TO REMAIN

NEW WP-924 (MATCH

EX. SHOE) ALL AROUND

NEW 1/2" RED OAK VENEER PNL.

TO MATCH EX.

NEW LEVEL 3 FIBERGLASS BALLISTIC PANEL

W/ SEALANT ALL AROUND

ON 3-5/8" 20 GA. GALV. STUDS @ 16" OC

NEW R-15 MINERAL WOOL INSUL.

OPAQUE BLACK FILM ON INTERIOR

WINDOW FACE

EX. STND WD WINDOW STOOL

DOOR EX-5

C

DOOR EX-5

INTERIOR

D

DOOR EX-3, EX-4, EX-6, EX-7

EXTERIOR & INTERIOR

C

NEW PTD. STL. BALLISTIC DOOR

W/ APPLIED MOLDINGS

EXISTING WD CASING

CUT BACK FOR NEW HM

FRAME

CLEAR BALLISTIC GLASS

8' -6

1 2"

EX. CLG. TO REMAIN

6'-0"

VER.

PTD. HM FRAME

1 2 3

TRIM #1 TRIM #2

TRIM #3

RESINART C-V1A51

2-3/4" X 1-3/8" *

RESINART C-H7180

1-3/4" X 3/4" *

RESINART C-05689-1

1-11/16" X 1-5/8" *

* OR APPROVED EQUAL

(DOOR EX-4 EXTERIOR SIM. TO TYPE "C")

SCHED. GLASS

INSULATED TEMPERED

SAFETY GLASS W/

CLEAR 3M

IMPACT SECURITY FILM

WHERE NOT BALLISTIC

RATED

INSULATED TEMPERED

SAFETY GLASS W/ CLEAR 3M

IMPACT SECURITY FILM