Attach 9 RIR_QAP_W04870.pdf
PDF 95 KB Posted
- Attached to
- End Plate and Housing Components Federal contract opportunity
- Solicitation number
- N66604-25-Q-0094
About this file
This document is a Receipt Inspection Report for two parts, an End Plate and a Housing, to be provided under a federal contract opportunity.
The key details are:
- The parts are being procured under Work Order W04870 by the TAHE Facility at NUWC in Newport, RI.
- The contractor must provide a Certificate of Compliance, Mercury Free Statement, Certificate of Analysis for raw materials, and documentation on domestically sourced materials and special processes used.
- For the Housing part, the contractor must also provide Welding Procedure Specifications, Procedure Qualification Records, and Non-Destructive Test reports.
- The related federal contract opportunity is a five-year Indefinite Delivery/Indefinite Quantity purchase order issued by the Naval Undersea Warfare Center Division, Newport. The contractor shall provide End Plates and Housings in accordance with the provided government drawings and specifications. Access to the drawings is restricted to offerors with active Joint Certification Program registration.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attach 1 Amend 0004 RFQ N6660425Q0094.pdf | ||
| Attach 1 Amend 0003 RFQ N6660425Q0094.pdf | ||
| Attach 11 Clause 52.216-19.pdf | ||
| Attach 1 RFQ N6660425Q0094.pdf | ||
| Attach 10 VIR_W04870.pdf | ||
| Attach 2 CDRLs_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TAHEF-Form-No. 008 Rev B
10/3/2023
TAHE FACILITY
NUWC, BLDG. 6
NEWPORT, RI 02841
TAHE FACILITY QUALITY PROVISIONS
RECEIPT INSPECTION REPORT
PART NUMBER
1220D1176
PART NOMENCLATURE
End Plate
DRAWING NUMBER
1220D1176_54497_FN_B
REV
B
SOURCE:
S/N:
PURCHASE ORDER:
PURCHASE REQUEST:
WORK ORDER:
W04870
STATEMENT OF WORK:
SALES ORDER:
FUTURE BUILDS
QTY RECEIVED:
UNIT THE ORDER IS FOR:
OTES/DOTES
ORDER IS FOR INVENTORY:
PURCHASE
New Manufacture
OUTSIDE SERVICE
CHARACTERISTIC MEASURED / VERIFIED DISPOSITION-REMARKS
THE FOLLOWING QUALITY DOCUMENTATION /
INFORMATION / INSTRUCTIONS MUST BE
PROVIDED / ADHERED TO:
P/N: 1220D1176, QTY: 45
Certificate of Compliance: that items were manufactured in accordance with all applicable instructions and specifications.
Required (A001)
Mercury Free Statement: A signed document from the supplying vendor certifying that mercury and mercury containing compounds were not intentionally added to nor came in contact with hardware or supplies furnished under this work order. ROHS is not an acceptable substitute.
Required
(A002)
Certificate of Analysis of raw material stating that it meets the specifications identified.
Required – Provide material certifications for Copper-Nickel Alloy comp. 70-30, soft or hard temper, per MIL-C-15726 IAW Note 1 of drawing 1220D1176.
(A003)
Domestically Sourced Material: all raw material must be sourced domestically or from a qualified country per DFARS Part 225: Foreign Acquisition.
Required
(A004)
Product Identification: identification must appear on external surfaces of items or packages. (Military specifications will be provided upon request).
Required – Mark part number IAW Note 5 of drawing 1220D1176.
Process Certification: that items were manufactured in accordance with special processes identified.
Not Required
Special Packaging Requirements: protect parts to prevent damage during handling and transportation.
GFI: DOCUMENTATION PROVIDED
1220D1176_54497_
FN_B
7345140_53711_FN
_A
MIL-STD-
130N_with_Change- 1_2012-11-16
S9074-AR-GIB-010-
278_CHG-A_2013-
02-14 (MIL-STD-
278)
T9074-AS-GIB-010-
271_REV-1_MIL-
271_2014-09-11
SAE AS5202_REV-
A_2013-01-01
RIR_QAP_W04870 VIR_W04870
VENDOR DO NOT WRITE BELOW. FOR TAHEF QA ONLY.
10/3/2023
TOTAL ACCEPTED
TOTAL REJECTED
INSPECTOR
DATE
TAHE FACILITY
NUWC, BLDG. 6
NEWPORT, RI 02841
TAHE FACILITY QUALITY PROVISIONS
RECEIPT INSPECTION REPORT
PART NUMBER
7345140
PART NOMENCLATURE
Housing (9070B)
DRAWING NUMBER
7345140_53711_FN_A
REV
A
SOURCE:
S/N:
PURCHASE ORDER:
PURCHASE REQUEST:
WORK ORDER:
W04870
STATEMENT OF WORK:
SALES ORDER:
FUTURE BUILDS
QTY RECEIVED:
UNIT THE ORDER IS FOR:
OTES/DOTES
ORDER IS FOR INVENTORY:
PURCHASE
New Manufacture w/ Welding
OUTSIDE SERVICE
CHARACTERISTIC MEASURED / VERIFIED DISPOSITION-REMARKS
THE FOLLOWING QUALITY DOCUMENTATION /
INFORMATION / INSTRUCTIONS MUST BE
PROVIDED / ADHERED TO:
P/N: 7345140, QTY: 45
Certificate of Compliance: that items were manufactured in accordance with all applicable instructions and specifications.
Required (A001)
Mercury Free Statement: A signed document from the supplying vendor certifying that mercury and mercury containing compounds were not intentionally added to nor came in contact with hardware or supplies furnished under this work order. ROHS is not an acceptable substitute.
(A002)
Certificate of Analysis of raw material stating that it meets the specifications identified.
Required – Provide material certifications for welding rods used for this work order (Ref. Note 7 of drawing 7345140.
Required – Provide material certifications for Copper-Nickel alloy per MIL-C-15726, include chemical and physical test reports (Ref. Notes 4 and 6 of drawing 7345140). NOTE: Cast Copper- Nickel per ASTM B369 per C96200 Alloy may be used for P/N: 7345140.
(A003)
Domestically Sourced Material: all raw material must be sourced domestically or from a qualified country per DFARS Part 225: Foreign Acquisition, with exception of welding rods.
Required
(A004)
Process Certification that items were manufactured in accordance with special processes identified.
Required – WPS and PQR must be on file with the TAHEF prior to performing welding. Weld IAW Note 7 of drawing 7345140.
(A005)
Test Data: to be provided. Required - Provide NDT report. Report shall identify specific weld pass/fail and associated remarks (if required). Ensure report includes certified inspector’s name and NDT date.
(A006)
Product Identification: identification must appear on external surfaces of items or packages. (Military specifications will be provided upon request).
Required – Mark part number IAW Note 5 of drawing 7345140.
10/3/2023
Special Packaging Requirements: protect parts to prevent damage during handling and transportation.
GFI: DOCUMENTATION PROVIDED
1220D1176_54497_
FN_B
7345140_53711_FN
_A
MIL-STD-
130N_with_Change- 1_2012-11-16
S9074-AR-GIB-010-
278_CHG-A_2013-
02-14 (MIL-STD-
278)
T9074-AS-GIB-010-
271_REV-1_MIL-
271_2014-09-11
SAE AS5202_REV-
A_2013-01-01
RIR_QAP_W04870 VIR_W04870
VENDOR DO NOT WRITE BELOW. FOR TAHEF QA ONLY.
TOTAL ACCEPTED
TOTAL REJECTED
INSPECTOR
DATE
File details come from the government source that posted it. Updated .