Attach 1 -SOW Recycling Containers Dec 2024.pdf

Statement of Work

PURCHASE OF SOLID WASTE AND RECYCLING CONTAINERS

WRIGHT-PATTERSON AIR FORCE BASE, OHIO

6 December 2024

1.0 BACKGROUND

Wright-Patterson Air Force Base (WPAFB) is in southwestern Ohio, between the cities of Dayton and Fairborn. It is situated approximately 60 miles north of Cincinnati, Ohio and 50 miles west of Columbus, Ohio and occupies portions of Greene and Montgomery counties. The base is comprised of two areas, known as Areas A and B. Solid waste and recycling containers are required to collect and store solid waste, construction and demolition debris and recyclable materials to prevent littering and ensure proper disposal and/or processing. Because the containers are exposed to extreme weather and constant wear and tear from the variety of materials and continuous servicing, they generally have a lifespan of 8-15 years. WPAFB has a current inventory of over 500 containers that will require replacement over time. These containers support the municipal solid waste service contract and the Qualified Recycling Program, both of which are administered by the 88th Civil Engineer Group.

2.0 DESCRIPTION OF WORK

The Contractor shall furnish all labor, materials, equipment, and supplies necessary to complete the requirements of this PWS within 90 days. All costs incurred in completion of this PWS will be borne by the Contractor.

Provide the following containers as needed:

8 Cubic Yard Standard Duty Slant Front Load Container - Floor: 10 gauge, Walls: 12 gauge, Pockets: Heavy Duty with Three Way Fork Entry Guide, Interlocking Top Channels with formed 10-gauge Bottom Runners, Primed and Painted Any Standard Color

8 Cubic Yard Standard Duty Flat Front Load Container - Floor: 10 gauge, Walls: 12 gauge with Horizontal V-Crimps for Added Strength, Doors: (2) 30"x 30" Sliding, Pockets:

Heavy Duty with Three Way Fork Entry Guide, Top Channels: Interlocking, Bottom Runners:

2 1/2" Tall Formed, Primed and Painted Any Standard Color

8 Cubic Yard Universal Type Lugger with solid top, Floor and walls; ¼” plate steel. Top 12 gauge steel. Doors: (2) 12 gauge steel hinged. Rear bail and side lifting lugs. Primed and Painted any Standard Color

30 Cubic Yard Standard Duty Rectangular Roll Off Container 22' Long - Floor: 7 gauge with 3" structural channels on 18" centers and 6" x 2" x 3/16" Structural Tubing Main Rails, Walls: 12 gauge with side columns on 36" centers and 3" x 4" x 11-gauge Top Rails, Primed and Painted any Standard Color.

30 Cubic Yard Standard Duty Bathtub ROC 22' Long - Floor: 7 gauge with 3" structural channels on 18" centers and 6"x2"x 3/16" Structural Tubing Main Rails, Walls: 10 gauge with 4" x 3" x 3/16" Top Rails, Primed and Painted any Standard Color

3.0 GENERAL CONTRACTOR REQUIREMENTS

3.1 GOVERNMENT PROPERTY. All documents, photographs, maps, graphics, mailing lists, computer files and the like developed by the Contractor in completing the requirements of this PWS are Government property and will be delivered to the 88 CEG/CEIEC point of contact (POC) upon completion of the task. All contractors taking photographs must be escorted and use a digital camera. The pictures must be reviewed and approved by the WPAFB CE OPSEC Manager before the Contractor leaves the base.

3.2 DATA SECURITY. The Contractor shall not release any data, reports, or materials collected or developed while completing this project without the expressed written consent of the 88 CEG/CEIEC POC.

3.3 GENERAL PROVISIONS. All reports, maps, photographs, notes and other work developed in the performance of this contract shall be and remain the sole properties of the Government and may be used by the Government on any other work without additional compensation to the contractor. The contractor agrees not to assert any rights and not to establish any claim with respect thereto. The contractor agrees to furnish all retained materials on the request of the contracting officer. The contractor shall be responsible for the accuracy and validity of the material presented in their reports.

3.4 SCHEDULING. The Technical Representative(s) will notify the contractor in advance of the work to be accomplished. The Contractor shall schedule all work to be performed in advance with the Technical Representative. The Contractor will obtain approval from the Technical Representative for all schedules of work to be performed.

4.0 GENERAL INSTRUCTIONS TO THE CONTRACTOR. The following conditions shall be observed by the Contractor:

4.1. The contractor must familiarize himself with the hours of gates that impact access to each work area, and coordinate access to all work areas through the 88 CEG/CEIEC

POC.

4.2. The contractor must abide by applicable state traffic laws.

4.3. Before starting any work whereby traffic would be impeded or hindered, especially fire trucks and police vehicles, notify the Base Fire Department at 257-6933 and Security Forces at 257-6959 or 257-6516 at least 72 hours prior to placing any barricades. The site work hours are Monday through Friday, daylight hours, however notify the program manager if planning to work past 5:00 p.m. Work may be accomplished on Saturdays, Sundays, or government holidays with written concurrence from the program manager or contract administrator.

5.0 POINTS OF CONTACT

WPAFB Contract Administrator: AFLCMC/PZIC 1940 Allbrook Dr., Building 1

Wright-Patterson AFB, Ohio 45433-5309

WPAFB Technical POCs: Mr. Chet Powers Solid Waste Program Manager

88 CEG/CEIEC

1450 Littrell Rd, Bldg 22, Area A (30022) Wright-Patterson AFB, Ohio 45433-5209

Email: chet.powers@us.af.mil Phone: (937) 257-3349