Attach 01 1 Figures- room layouts.pdf

• Install new center wall. New wall will extend a minimum of 6” above existing ceiling height.

• Re-work ceiling grid for new wall. Adjust room ceiling grid for 2 x 2 ceiling tiles.

• Install ceiling tiles in each room. Existing 2 x 4 ceiling tiles can be cut to 2 x 2 if not damaged or stained. Provide additional ceiling tiles, as necessary.

• Insulation of ceiling tile to be re-used and spread evenly above the ceiling. Provide new ceiling tile as necessary to ensure complete coverage.

• Install new entry metal frame and door.

• Install new electrical receptacle in new wall using existing circuits in the room.

• Replace lights in each room. Provide separate switches for each room.

• Provide supply and return A/C grills and ductwork for each office.

Figure 1: Office 1 lights supply return

New electrical outlet

Data box

Existing electrical outlet

Attachment 1: Figures- room layouts

• Install ceiling tiles in each room. Existing 2 x 4 ceiling tiles can be cut to 2 x 2 if not damaged or stained. Provide additional ceiling tiles as necessary.

• Insulation of ceiling tile to be re-used and spread evenly above the ceiling. Provide new ceiling tile as necessary to ensure complete coverage.

• Install new entry metal frame and door.

• Install new electrical receptacle in new wall using existing circuits in the room.

• Replace lights in each room. Provide separate switches for each room. Eliminate 3-way switch.

• Eliminate door and frame that leads into the library. Patch wall on both sides to match existing.

(removed door may used for one of the new doors.).

Figure 2: Office 2

Lights supply

Return

New electrical outlet

Data box

• Install ceiling tiles in each room. Existing 2 x 4 ceiling tiles can be cut to 2 x 2 if not damaged or stained. Provide additional ceiling tiles, as necessary.

• Insulation of ceiling tile to be re-used and spread evenly above the ceiling. Provide new ceiling tile as necessary to ensure complete coverage.

• Install new entry metal frame and door.

• Install new electrical receptacle in new wall using existing circuits in the room.

• Replace lights in each room. Provide separate switches for each room.

• Provide supply and return A/C grills and ductwork for each office.

Figure 3: Office 3

Lights

Return

Supply

New electrical outlet

Data box

• Remove frame and door leading to office 2. Patch wall to match existing.

• Provide floor cabinet with counter and stainless sink and faucet.

• Connect hot and cold water to faucet.

• Route drain to drain line for sink in restroom.

• Re-work ceiling grid for new wall. Adjust room ceiling grid for 2 x 2 ceiling tiles.

• Install ceiling tiles in each room. Existing 2 x 4 ceiling tiles can be cut to 2 x 2 if not damaged or stained. Provide additional ceiling tiles, as necessary.

• Insulation of ceiling tile to be re-used and spread evenly above the ceiling. Provide new ceiling tile as necessary to ensure complete coverage.

• Replace lights in each room. Provide separate switches for each room.

• Provide supply and return A/C grills and ductwork for each office.

Figure 4: Library

Return

Supply

Light New electrical outlet

Figure 5: New Wall Detail

5/8” gypsum board on 3-5/8” metal studs

@ 16” on center Sound attenuation

Insulation

Ceiling tile