Att H_Specifications~3.xlsx

XLSX spreadsheet 24 KB Posted

Attached to
Office of Oregon State Police Truck Bed Extension Storage Units
Solicitation number
S-DASOBO-00000450
Issued by
Marion County, Oregon

About this file

Written by GovTribe AI ·

This document contains the mandatory specifications for Truck Bed Extension Storage Units (TBESUs) for a contract opportunity issued by the Office of Oregon State Police. The contract involves providing TBESUs for Marion County, Salem City, and Salem City. The specifications outline the mandatory requirements for the TBESUs, including details on the lower platforms, overall dimensions, weight capacities, drawers, storage compartments, protective coatings, and other features. Eleven different vehicle configurations are specified, with quantities ranging from one to nine units per vehicle type. No information is provided on the response due date, award date, or contract term.

The document also details pricing and capacity requirements. The TBESUs must have total load capacities ranging from 1,100 to 1,200 pounds. The document does not mention any set-asides, incumbents, or funding sources. Overall, this appears to be a comprehensive set of technical specifications for the procurement of Truck Bed Extension Storage Units for the participating Oregon state and local agencies.

View the file

Other files

File Type Posted
D4 OR22W MP 9 and 19 Stockpile Cleanups RFB~1.pdf PDF
Att D_Reference Check Form~2.doc DOC document
Att B_Disclosure Exemption Affidavit.doc DOC document
Att G_Responsibility Inquiry~2.doc DOC document
Att E_Price Proposal~1.xlsx XLSX spreadsheet
Att C_Proposer Information and Certification Sheet.doc DOC document
RFP S-DASOBO-00000450.pdf PDF
Att A_Sample Price Agreement~1.docx DOCX document
Att F_COBID~1.doc DOC document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Mandatory Specifications

Proposer Name:
IDTruck Bed Extension Storage Unit "TBESU" NumberVehicle DescriptionSpecificationMandatory

or

DesirableProposed TBESU Can Provide the Attribute
(Yes or No)Describe How Specification is met by Proposer's OfferingYes
G.1ALL TBESUsN/AAll TBESU components using acx plywood must be coated with a water proof protective sealer.Mandatory
A1.1ONE (1)Chevy Silverado or Toyota TundraTBESU Lower Platform must be 34" 7-ply SuperStratum. Platform rails must be built of 2" by 1/8" steel angle and must be punched for bungee cord ties.MandatoryNo
A1.2Overall TBESU must be approximately 79" L from front grill to end of unit. (Before any drawers or attachments are extended).Mandatory
A1.3TBESU must be 48.25" W, with at least 48" inches of clearance between deck angles.Mandatory
A1.4TBESU Bed must be 2" D.Mandatory
A1.5Distance from vehicle bed to top of TBESU lower deck must be 7.5".Mandatory
A1.6Approximate TBESU weight must be 447 Lbs.Mandatory
A2.1TWO (2)Chevy TahoeLower Platform must be approximately 1/2" 5-ply acx plywood. Carrier must be built of 1 1/4" by 18" steel angle. Doors must be of .080 Diamond Plate Aluminum. Safety Screen must be 1 1/2 x 10 GA steel mesh in an angle steel frame.Mandatory
A2.2Overall TBESU must be approximately 32" H.Mandatory
A2.3Overall TBESU must be approximately 37 1/2" L (before and drawers or attachments are extended). Fully extended length must be approximately 41" L.Mandatory
A2.4Overall TBESU must be approximately 47" W.Mandatory
A2.5Approximate weight of TBESU must be 300 Lbs.Mandatory
A2.6Distance from vehicle bed to top of TBESU lower deck must be approximately 5"Mandatory
A2.7Back end of TBESU must have a full extension drawer with a drawer load capacity of 300 Lbs. Drawer must be approximately 16" D x 24" W x 13" T. Drawer must include locking slides.Mandatory
A2.8Full etension drawer must have energy chains attached.Mandatory
A2.9Both front sides of TBESU must have full face doors with hinges at bottom of doors and a locking compression latch on both doors. Doors must measure approximately 5" x 14" on both sides. Space must be an open thru design.Mandatory
A2.10TBESU must have an open thru deisgn in the center of unitMandatory
A2.11TBESU must have four containment rails on the top deck measuring approximately 2" H.Mandatory
A2.12TBESU deck from bottom platform to top deck (before containment sides) must be 22" MAXIMUM.Mandatory
A2.13Powder coat carrier. No bullet on decks. Rubber mats covering entirety of upper deck.Mandatory
A2.14TBESU legs from bottom of TBESU to top deck must be approximately 14"Mandatory
A3.1THREE (3)Chevy TahoeTBESU Day Box must be constructed of 1/8" steel tread plate, and lined with 1/2" plywood. Inside of Day Box must be sealed with bullet liner or similar high caliber protective material. Box must meet or exceed ATF Type 3 Magazine requirements. Day Box must travel on 300 Lb capacity, 36" slides. Lid must be equipped with 20-30 Lb. gas springs. Reciever section must be built of Aluminum.Mandatory
A3.2All outside surfaces of TBESU must be bullet lined or coated with a similar high caliber protective material.Mandatory
A3.3Overall weight of TBESU must be approximately 200-225 Lbs.Mandatory
A3.4Overall TBESU must be approximately 46" W on the outside of unit.Mandatory
A3.5TBESU must be approximately 37 1/2" L on outside of unit (before any drawers or attachments are extended).Mandatory
A3.6Overall TBESU must be approximately 19" H.
A3.7Distance from vehicle bed to lower platform must be approximately 2"Mandatory
A3.8TBESU must contain three protection ends on the back of unit. These protection ends must be approximatley 18" H.Mandatory
A3.9TBESU must contain two weapons drawers that must be approximately 15" T x 36" D x 22" W.Mandatory
A3.10TBESU weapons drawers must be raised approximately 1" to clear molding.Mandatory
A3.11TBESU right side weapons drawer must have a smooth aluminum lid. Left side weapons drawer must be bullet lined or coated with a similar high caliber protective material.Mandatory
A3.12TBESU weapons drawers must have an opening width of approximately 21 1/2"Mandatory
A3.13Left side weapons drawer must have a secondary key activated lock located at the front of the drawer (spare keys must be available to the Agency upon request).Mandatory
A3.14TBESU must have interior demensions of approximately 15" W x 34" D x 15" T with no divider on interior of unit.Mandatory
Mandatory
A4.1Four (4)Dodge 2500 6 1/4 TonTBESU lower platform must be 3/4" 7-ply acx plywood with 1/2" acx plywood on upper shelf. Carrier must be built of 1 1/2" by 1/8" steel angle with 1 1/2" 10 guage steel mesh screen material.Mandatory
A4.2File drawer and gun vault must be diamond plate Aluminum. Carrier & platform rails must be punched for bungee cord ties.Mandatory
A4.3TBESU top decks must be bullet lined or coated with a similar high caliber protective material.Mandatory
A4.4Overall TBESU must be approximately 48" W.Mandatory
A4.5TBESU must be approximately 28" H from bottom platform to top of unit.Mandatory
A4.6Overall TBESU must be approximately 34" H.Mandatory
A4.7TBESU pass thru storage space openings must be approximately 16" H.Mandatory
A4.8Overall TBESU must be approximatley 6' 1/4" L.Mandatory
A4.9TBESU must have a rear folding work table approximately 46" W x 17" T.Mandatory
A4.10Distance from vehicle bed to lower platform must be approximately 1 1/4".Mandatory
A4.11TBESU must have a rear storage area approximatley 18" D.Mandatory
A4.12TBESU must have a front key locking gun vault with hinges at bottom of door approximatley 8" W x 48" D.Mandatory
A4.13TBESU must have three folding gates on top deck measuring approximatley 2" H.Mandatory
A4.14Total TBESU load pacpcity must be 1,200 Lbs.Mandatory
A5.1Five (5)Chevy 2500 Short Bed 6 1/2' BedLower platform must be 3/4" acx plywood with upper deck of 1/2" acx. Carrrier must be built of 1/8" steel angle with 1 1/2" 10 guage flattened steel safecty screen.Mandatory
A5.2Top of plywood decks & steel carrier structure must be coated with bullet liner or coated with similar high caliber protective material.Mandatory
A5.3Drawer must be of .080 diamond plate Aluminum and rubber mat on floor. Explosives Day Box must meet or exceed Type 3 ATF regulation.Mandatory
A5.4Overall TBESU must be approximately 70 3/4" L (before any drawers or attachments are extended).Mandatory
A5.5Overall TBESU must be approximately 34" H.Mandatory
A5.6Overall TBESU must be approximatley 48" W.Mandatory
A5.7The TBESU must measure approximately 21" from bed of vehicle to top of deck.Mandatory
A5.8The total weight of the TBESU must be 795 Lbs.Mandatory
A5.9The extensions must be approximately 85" L.Mandatory
A5.10The TBESU total cargo capacity must be 1,100 Lbs.Mandatory
A5.11A mid section safety screen must measure approximately 40" L x 10" T.Mandatory
A5.12The front end of TBESU must have a safety screen approximately 40" W.Mandatory
A5.13The TBESU must have a space from vehicle bed to top of bottom deck of approximately 6 1/2"Mandatory
A5.14TheTBESU must be approximately 11 1/2"D supported by four legs equaling approximately 11 1/2" L.Mandatory
A5.15The left side of the TBESU must have a type 3 explosives day box measuring approximately 5" W x 16" D x 10" T.Mandatory
A5.16The left side type 3 explosives Day Box must have a space between the back side of the day box and the end of the TBESU of 1 1/4" reversed angle.Mandatory
A5.17Right side of TBESU must have a type 3 explosives Day Box approximately 12" W with no divider on the inside of Day Box.Mandatory
A5.18TBESU must have angle rail containment on two sides.Mandatory
A5.19Back end of TBESU must contain a full extension locking drawer approximately 46" W x 25" D x 10 1/2" T.Mandatory
A5.20Front of TBESU must have an open thru space.Mandatory
A5.21Distance from back of Left side day box to open thru space must be approximately 26".Mandatory
A6.1SIX (6)Chevy 34 Ton Short Bed 6 1/2' BedLower platform must be 3/4" acx plywood, and upper platform must be 1/2" axc.Mandatory
A6.2Carrier must be built of 1/8" steel angle with 1 1/2" 10 guage flattened steel safety screen.Mandatory
A6.3Top of plywood decks must be coated with bullet liner or similar high caliber protective material.Mandatory
A6.4Drawers must be .080 Diamond Plate Aluminum with mat on floor.Mandatory
A6.5Overall TBESU must be approximately 76" L.Mandatory
A6.6Overall TBESU must be approximately 34" H.Mandatory
A6.7Overall TBESU must be approximately 48" W.Mandatory
A6.8Approximate weight of TBESU must be 815 Lbs.Mandatory
A6.9Front safety screen must be approximately 40" W.Mandatory
A6.10Distance from bottom of TBES to top must be approximately 27" H.Mandatory
A6.11Distance from vehicle bed to top of TBESU must be approximately 34" H.Mandatory
A6.12A front open thru compartment must be approximately 54" W.Mandatory
A6.13A rear open thru compartment must be approximately 18" W.Mandatory
A6.14Distance from bottom of TBESU to top deck must be approximately 12" H.Mandatory
A6.15Top deck length must be approximately 72" L.Mandatory
A6.16A full extension drawer with key lock must be approximately 45" W x 25" D x 11" H. With no dividers in the inside of drawer.Mandatory
A6.17Full extension drawer must have a 300 Lb load capacity. And travel on rails that support the 300 Lb. drawer load capacity.Mandatory
A6.18TBESU must have a total load capacity of 1,200 Lbs.Mandatory
A7.1Seven (7)F-150 5 1/2Lower Platform must be of 3/4" 7-ply acx Plywood.Mandatory
A7.2Platform rails must be built of 2" x 1/8" steel angle, and must be punched for bungee cord ties.Mandatory
A7.3Deck must be coated with bullet liner or coated with a similar high caliber protective material.Mandatory
A7.4Overall TBESU must be approximately 76" L.Mandatory
A7.5TBESU bed storage area must be approximatley 16 1/2" H.Mandatory
A7.6Overall TBESU must be approximately 48" W.Mandatory
A7.7TBESU must weight approximatley 475 Lbs.Mandatory
A7.8TBESU must have a total extension of approximately 82".Mandatory
A7.9Distance from vehicle bed to Lower Platform must be approximately 6 1/4".Mandatory
A7.10Safety screen must be approximately 24" H.Mandatory
A7.11Total top deck must be approximately 12" D.Mandatory
A.8.1Eight (8)Chevy 3/4 Ton Short Bed 6 1/2' with topper and side boxesLower platform must be made of 3/4" acx plywood, and upper platform must be 1/2" axc.Mandatory
A8.2Carrier must be built of 1/8" steel angle, with 1 1/2" 10 guage flattened steel safety screen.Mandatory
A.8.2Top of plywood decks must be coated with bullet liner or coated with a similar high caliber protective material.Mandatory
A8.3Drawers must be of .080 diamond plate Aluminum with rubber mats on bottoms of all drawers.Mandatory
A.8.3Overall TBESU must be approximately 76" L (before any drawers or attachments are extended).Mandatory
A8.4Overall TBESU must be approximately 34" H.Mandatory
A.8.4Overall TBESU must be approximately 48" W.Mandatory
A8.5TBESU must weight approximately 675 Lbs.Mandatory
A.8.5The total extension of the TBESU must be over 100%.Mandatory
A8.6Safety screen must be approximately 40 1/2" W. And may very depending on current vehicle design specifications.Mandatory
A.8.6Distance from Lower Platform to top of TBESU must be approximately 27"Mandatory
A8.7Upper deck must be approximately 72" L.Mandatory
A.8.7A rear open thru compartment must be approximately 26" L.Mandatory
A8.8Distance from bottom platform to top deck must be approximately 12" H.Mandatory
A.8.8A left side full extwnsion locking drawwer must be approximately 44" W x 23" D x 11" H with no divider on inside of drawer.Mandatory
A8.9Left side extension drawer must be on 300 Lb. capacity locking slides. And drawer must have a total load capacity of 300 Lbs.Mandatory
A.8.9Left side extension drawer must have a weather resistant seal on the lid.Mandatory
A8.10A rear full extension key locking drawer must be approximately 45" W x 25" D x 11" H. with no divider inside of drawer.Mandatory
A.8.10Rear extension drawer must be on 300 Lb. capcity locking slides. And drawer must have a 300 Lb. load capacity.Mandatory
A8.11Rear extension drawer must have a weather resistant seal on the lid.Mandatory
A8.12TBESU must have a total load capacity of 1,200 Lbs.Mandatory
A9.1Nine (9)Dodge 2500 6 1/4Lower platform must be 3/4" 7-ply acx plywood.Mandatory
A9.2Upper shelf must be 1/2" acx plywood.Mandatory
A9.3Carrier must be built of 1 1/2" x 18" steel angle with 1 1/2" 10 guage steel mesh safety screen material.Mandatory
A9.4Key locking file drawer and gun vault must be Aluminum diamond plate.Mandatory
A9.5Carrier and platform rails must be punched for bungee cord ties.Mandatory
A9.6Top of all desck must be coated with bullet liner or coated with similar high caliber capacity material.Mandatory
A9.7Overall TBESU must be approximately 48" W.Mandatory
A9.8Overall TBESU must be approximately 34" H.Mandatory
A9.9Overall TBESU must be approximately 38 3/4 L.Mandatory
A9.10Front of TBESU must have a pass thru compartment with four (4) open storage racks.Mandatory
A9.11Pass thru compartments must be approximately 16" H.Mandatory
A9.12Center of TBESU must have a keyed locking gun vault.Mandatory
A9.13Top rails of TBESU must fold down.Mandatory
A9.14Distance from vehicle bed to top of deck must be approximately 6 1/4" H.Mandatory
A9.15Rear of TBESU must have a fold down work table approximately 46" W x 17" H.Mandatory
A9.16Inside of TBESU rear must be an approximate 34" W open storage space.Mandatory
A9.17Rear of TBESU must have a file drawer approximately 16" H.Mandatory

&8RFP# S-DASOBO-00000450 - Truck Bed Extension Storage Units &14ATTACHMENT H - SPECIFICATIONS

File details come from the government source that posted it. Updated .