Att. 2 FID.pdf

UH Army Furnishings Program – Furniture Item Descriptions (FID) Ansbach - WH 8300 & Bavaria, Graf Vilseck –WH 61 &

Rheinland Pfalz WH 1272 Appliances

Attachment 2 Page 1 of 6

Attachment #2

Furniture Item Descriptions (FID)

Unaccompanied Housing (UH)

Attachment 2 Page 2 of 6

TABLE OF CONTENTS PAGE NO.

1. GENERAL

1.1 Cut Sheets

1.2.1 Electrical

2. – 7. NOT USED

8. APPLIANCES

8.1 Refrigerator/Freezer

8.2 Microwave

8.3 Not Used

8.4 Range

8.5 Washing Machine

8.6 Dryer

8.7 Washing Machine

8.8 Dryer

Attachment 2 Page 3 of 6

1. GENERAL

1.1 Cut Sheets.

Cut sheets are required for all items in this RFQ. Items shall conform to the following requirements in order to be considered acceptable for this RFQ:

a. Cut sheets shall be legible with highlighted model numbers, dimensions, warranty information, and all salient features required in the FID.

b. All cutsheets shall be provided in 1-3 searchable PDF documents or other type of searchable documents. PDFs created using scanned documents shall use text recognition (i.e. OCR) to ensure search functions are enabled.

c. Shall be assembled and labeled in numerical order based on the FID section number, ex.: 2.1 Mattress, 3.1 Bed, etc.

d. Label each PDF with the pages contained within, ex.: Vendor’s cutsheets pgs. 1-10, Vendor’s cutsheets pgs. 11-25, etc.

e. Cut sheets shall include line drawings or images that address all required features.

f. Cut sheets shall clearly state name brand and model numbers for all items quoted.

g. Cut sheets shall clearly state all required features that have been provided. List all the features if printed literature is not available. The features shall be listed on the cut sheet with the name, phone number, and company of the person who is providing the information.

h. Cut sheets which have more than one model, size, type, or which show statement of line options shall be clearly marked or highlighted to show the model, size, type, and all salient features proposed.

i. Products shall be manufactured in a TAA compliant country, where applicable.

1.2.1 Electrical.

See below. Electrical convertors shall not be acceptable.

2. – 7. NOT USED

8. APPLIANCES

Appliances shall be CE Approved. Manufacturer’s warranty shall be provided. Contractor shall verify onsite that clearances are adequate for appliances. See FID 1.2 for electrical requirements.

8.1 Refrigerator/Freezer.

a. Shall be 23-25”W x 25-26”D x 68”-69.25”H.

Attachment 2 Page 4 of 6

b. Shall be free standing.

c. Shall have 1 door for freezer and 1 for the refrigerator.

d. Refrigerator/Freezer shall have a minimum interior capacity of 10.2 cu.ft.

e. Refrigerator shall have a minimum of:

i. 2 Full-width adjustable glass or wire shelves in the main compartment

ii. 1 Full-width adjustable glass, plastic, or wire shelf or drawer in the freezer compartment

iii. 1 Crisper

iv. In-door storage

f. Shall be frost-free.

g. Doors shall be hinged on the left.

h. Shall be white.

i. Provide minimum 1 year warranty for parts and labor.

j. Shall be manufactured in a TAA compliant country, where applicable.

k. 220V, 50 Hz Schuko plug

8.2 Microwave.

a. Shall be 19-21”W x 15-17”D x 11-13” H.

b. Microwave shall have minimum capacity of 0.9 cu.ft.

c. Microwave shall include:

i. Food turntable

ii. Multiple power levels

iii. Minimum 900 watts

d. Color shall be white.

e. Provide minimum 1 year warranty for parts and labor.

f. Shall be manufactured in a TAA compliant country, where applicable.

g. 220V, 50 Hz Schuko plug

8.3 Not Used.

8.4 Range.

a. Shall be 24”W x 23-25”D x 33-36”H.

b. Shall have minimum capacity of 2.2 cu.ft. (65 liters)

c. Shall be freestanding.

d. Oven shall have:

i. Bake and broil elements

ii. (2) Removable racks with a minimum of (3) rack positions

e. Range shall have a ceramic top with:

i. (4) burners.

f. Color shall be white.

Attachment 2 Page 5 of 6

g. Shall include height adjustable feet.

h. Provide minimum 1 year warranty for parts and labor.

j. Shall be manufactured in a TAA compliant country, where applicable.

k. 380V, 50 Hz, 16 Amps, and 5 wire cord that will be hardwired.

8.5 Washing Machine.

a. Shall be 24-27”W x 25-29”D x 38-44”H.

b. Shall be electric.

c. Shall be top load.

d. Shall have minimum capacity of 2.9 cu.ft.

e. Shall be commercial rated and warranted for laundromat-type or community-housing installations.

f. No coin box shall be provided.

g. Shall have minimum of:

i. 3 Cycles

ii. 3 Wash/Rinse temperatures

iii. Load sizes or automatic load sensor

iv. Bleach and fabric softener dispenser

h. Provide all supply hoses, drain lines, connectors, etc. for a functional unit.

i. 3 wire cord with Schuko plug.

j. Color shall be white.

k. Provide minimum 2 year warranty on parts.

l. Shall be manufactured in a TAA compliant country, where

m. 220V, 50 Hz, 16 Amps.

8.6 Dryer.

a. Shall be 26-28”W x 28-30”D x 38-44”H.

c. Shall have minimum capacity of 6.5 cu.ft.

d. Shall be commercial rated and warranted for laundromat-type or community-housing installations.

e. No coin box shall be provided.

f. Shall be same manufacturer as washer provided.

g. Shall have minimum of 3 cycles.

h. Provide front-mounted lint screen.

i. Provide all connectors, vent kits, etc. for a functional unit.

j. Provide 3 wire cord with CEE plug.

k. Color shall be white.

l. Provide minimum 2 year warranty on parts.

m. Shall be manufactured in a TAA compliant country, where

Attachment 2 Page 6 of 6

n. 220V, 50 Hz, 16 Amps.

8.7 Washing Machine

a. Shall be 23.7”W x 24”D x 33.5” Maximum.

c. Shall be homestyle.

d. Shall be front load.

e. Shall have minimum capacity of .245 cu.ft (7Kg).

f. Shall have minimum of:

i. 3 Cycles

ii. 3 Wash/Rinse temperatures

iii. Bleach and fabric softener dispenser

g. Provide all supply hoses, drain lines, connectors, etc. for a functional unit.

h. 3 wire cord with Schuko plug.

i. Color shall be white.

j. Provide minimum 2-year warranty on parts.

k. Shall be manufactured in a TAA compliant country, where

n. 220V, 50 Hz, 16 Amps.

8.8 Dryer

a. Shall be 23.7”W x 24”D x 33.5” Maximum.

c. Shall be homestyle.

d. Shall be front load, condenser style.

e. Shall have minimum capacity of .245 cu.ft (7Kg).

f. Shall be same manufacturer as washer provided.

g. Shall have minimum of 3 cycles.

h. Provide front accessible lint screen.

i. Provide all connectors, vent kits, etc. for a functional unit.

j. Provide 3 wire cord with Schuko plug.

k. Color shall be white.

o. Provide minimum 2-year warranty on parts.

p. Shall be manufactured in a TAA compliant country, where

o. 220V, 50 Hz, 16 Amps.

END OF FID