ATT 2 - Irwin Seating Requirements FINAL.pdf
PDF 38 KB Posted
- Attached to
- Irwin Seating Co Auditorium Seating
- Solicitation number
- W50S88-26-Q-0118
- Issued by
-
Department of the Army National Guard
About this file
This document specifies auditorium seating requirements for a federal contract opportunity. The government seeks forty-four (44) cloth auditorium seats manufactured by Irwin Seating Company, specifically the Marquee Model 51.12.56.4, with delivery and installation required. The seating layout consists of four columns of six rows and four columns of five rows, with a walkway between the third and fourth rows, and will be mounted to a flat concrete surface with previously installed carpet.
The seats must feature integral lumbar support with a 36-inch back height, durable tufted upholstery, fold-up seats, pull-out tables, and cup holders. Physical specifications include a No. 51 Marquee ergonomically formed padded back with 2-inch foam; No. 12 Ergo-Padded seat with ergonomic substrate and molded foam; 3/4 seat fold mechanism; No. 4 steel platform; veneer end panels with rounded corners; flat solid hardwood center and aisle armrests; and extra-large plywood core tablet arm writing surfaces laminated on two sides for all forty-four seats. All wood components must be maple with rotary cut grain and Irwin standard stain color, while metal components require Irwin standard powder coat color and plastic components require single Irwin standard plastic colors. The government acknowledges that ADA compliance may require a small number of chairs with movable bases and specifies that the minimum number of seats with movable bases should be used to satisfy ADA requirements. Chairs must be hard mounted to the existing floor to the maximum extent practicable.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Auditorium Seating Requirements
Application Forty-Four (44) cloth auditorium seating with fold-up seats, pull-out tables, and cup holders. Layout will be four (4) columns of six (6) rows and four (4) columns of five (5) rows with a walkway between the third and fourth row (see attachment 3 for layout and room dimensions). Delivery and installation is required. Seating will be mounted to a flat concrete surface with previously installed carpet.
Function:
Forty-Four (44) fixed auditorium seats by Irwin Seating company. Marquee Model 51.12.56.4
Performance Requirements:
Durable seating formed with integral lumbar support and a 36” back height to provide proper support for the lower back and shoulders. Tufted for a refined appearance, pull out table, cup holder, and fold down seat required.
Physical Characteristics:
- No. 51 Marquee-Ergonomically formed 36” tall padded and upholstered back with 2” foam, tufted tailoring, and injection molded poly rear panel.
- No. 12 Ergo-Padded and upholstered seat with ergonomic substrate, molded foam, and structural composite seat pan.
- Seat fold – 3/4
- No. 4 Steel platform
- Veneer end panel.
- No. 56 Rounded corner veneer end panel.
- Flat solid hardwood center armrests.
- Flat solid hardwood aisle armrests.
- Chairs hard mounted to existing floor to the maximum extent practicable.
- ADA requirements must be complied with. The government realizes this may require a small number of chairs to possess movable basis. Any ADA requirements must be followed as such to allow the minimum number of seats with movable bases.
- (44) Extra-large size plywood core tablet arm writing surface, laminated on two sides.
- Fabric Irwin Grade 1, single color.
- All wood to be Maple – Rotary Cut.
- Irwin standard stain color on wood components.
- Irwin standard powder coat color on metal components.
- Single Irwin standard plastic color on seat component.
- Single Irwin standard plastic color on back component.
File details come from the government source that posted it. Updated .