Att 1 - Statement of Work 12 July 21.pdf

STATEMENT OF WORK

U.S. WEAPONS, FOREIGN WEAPONS, WEAPONS ACCESSORIES, AND NON-

STANDARD AMMUNITION

12 July 2021

Partnered Forces Operations

TABLE OF CONTENTS

1. SCOPE

2. APPLICABLE SPECIFICATIONS

3. REQUIREMENTS

4. TESTING, STORAGE AND INSPECTION

5. PACKAGING

6. DELIVERY

7. CONTRACT DELIVERABLES

1. SCOPE. This statement of work establishes requirements of the United States Special Operations Command (USSOCOM) contract for the acquisition of U.S. Weapons, Foreign Weapons, Weapon Accessories, and Non-Standard Ammunition. The statement of work includes the associated program management, logistics support, item descriptions, deliveries, testing, and packaging requirements.

The Prime contractor shall hold a Directorate Defense Trade Controls Brokering license and a Federal Firearms License Type 11 to support this contract.

1.1. BACKGROUND. The USSOCOM Ammunitions and Weapons Program has a requirement to purchase various commercial weapons, U.S. weapons, foreign weapons, and accessories based on the individual demands from multiple Contingency Operations (CONOPS). The general type and style of weapons, weapon accessories, and ammunition being requested are listed below in no order (see Table 1 and Table 2). These tables depict a certain style of weapon that is not all inclusive of certain sub models and styles of the weapon listed.

2. APPLICABLE SPECIFICATIONS

2.1. Department of Defense (DoD) Standards.

2.1.1. Joint Pub 1-02 DOD, Dictionary of Military and Associated Terms, 15 June 15

2.1.2. MIL-STD-129, Military Marking for Shipment and Storage

2.1.3. MIL-STD-1913, Dimensioning of Accessory Mounting Rail for Small Arms

Weapons

2.1.4. MIL-STD-109C, Quality Assurance Terms and Definitions

2.1.5. DI-MGMT-80934, Revision A Operations Security Plan

3. Availability of DoD documents: Unless otherwise indicated, copies of specifications, standards, and handbooks listed above are available from the Standardization Document Order Desk, 700 Robbins Ave, Bldg. 4D, Philadelphia, PA 19111-5094.

3.1. Non-Government standards and other publications.

3.1.1. Availability of Non-Government standards and other publications. Application for copies should be addressed to USSOCOM SOF AT&L Partnered Operations, at 7701 Tampa Point Blvd., MacDill AFB, FL 33621-5323.

4. REQUIREMENTS

4.1. Kick Off Meeting

The contractor shall conduct a preliminary kickoff meeting with the USG, which shall be conducted via video telecom or in person at USSOCOM HQ five (5) to ten (10) business days after a delivery order is awarded. The kickoff shall include a PowerPoint presentation with the following: an introduction of the contractor’s team, the contractor’s assessment of possible risks to propose and/or procure weapons and weapons accessories, reporting requirements, delivery schedules, operations security planning, and allow for the USG to walk through the contract.

4.2. Technology Improvements and Additional items not listed within this SOW

The Government reserves the right to revise the below tables to add additional U.S. weapons, Foreign Weapons, weapons accessories, and non-standard ammunition.

4.3. Definitions:

If a Delivery Order (DO) shall occur under this contract, the contractor shall meet the following basic terminology when proposing:

Accessory – product that mounts to the weapon and/or is used in support of the weapon operation or maintenance.

New Production – Product that was directly delivered from a factory production line within one year or less.

New Stock – Weapons, weapon systems, and ammunition that were manufactured within the last five years.

Stock – Weapons, weapon systems ammunition that were manufactured more than five years prior to delivery.

Refurbished – Weapon or weapon systems reconditioned, rebuilt to factory technical standards.

Any refurbishment of more than one time is not acceptable.

Substitution – An equivalent alternative to what was put out for solicitation.

Unused – Weapon or weapon systems that have never been used and shall be functionally ready for use.

4.4. Weapons and Weapons Accessories Item Descriptions

Table 1.0 - Item Descriptions

U.S. Weapons

5.56mm Assault Rifles: M4, M4A1, MK18, MK20, or similar 7.62mm Assault Rifles: MK17, HK417, DPMS GII Recon, or similar 5.56mm Machine Guns: M249, MK46, or similar 7.62mm Machine Guns: M240, MK48, or similar Handguns: Glock, Sig Sauer, Beretta, or similar .50 Cal Machine Guns: M2 or similar Sniper Rifles: Remington 700, M24, M14, XM-21, or similar Submachine Gun: H&K MP5-SD3, Magpul, Uzi, or similar Shotguns: Remington 870, Mossberg 500, or similar Suppressors: Handgun, Sniper Rifle, Machine Gun Grenade Launchers: Under Barrel, Stand Alone, Multi-shot

Foreign Weapons

5.45mm or 7.62mm: AK Variant Assault Rifles 12.7mm x 108mm: Heavy Machine gun, DShK, NSV, KORD or similar 14.5mm: KPV or similar 7.62mm Machine Gun: PKM-MG, MAG 58, RPK, or similar Sniper Rifles: SVD Dragunov, Sako, or similar Handguns: Makarov 60mm Mortar System 82mm Mortar System 120mm Mortar System

40mm Rocket Propelled Grenade (RPG) 73mm SPG-9 Launcher Anti-Tank Guided Missile: Konkurs, MILAN, METIS, Kornet, or similar Grenade Launchers: Under Barrel, Stand Alone, Multi-shot

Accessories

Magazines: Assault Rifles, Sniper Rifles, Handguns Blank Firing Adapters Cleaning Kits Front Sight Tool Holographic Sights 3x Magnifier Weapon Lights Muzzle Brake/Flashhiders Laser Sight (PEQ-2) or similar Sniper Rifle or Spotting Scope Rangefinder Handgun Holsters Rail Adapter Assemblies

4.4.1. For each type of weapon supplied to the USG, the contractor shall provide the following information:

4.4.1.1. Country of origin

4.4.1.2. Manufacturer

4.4.1.3. Condition of weapon (as defined in section 3.2)

4.4.1.4. Manufacturer’s acceptance data (if weapons are new production)

4.4.1.5. Subcontractor(s), sources of supply

4.5. Foreign Non-Standard Ammunition Item Descriptions

Table 2.0 - Foreign (Non-Standard) Ammunition

Small Arms

5.45 x 39mm Ball

5.45 x 39mm Blank

5.45 x 39mm Tracer

7.62 x 25mm Ball

7.62 x 39mm Ball

7.62 x 39mm Tracer

7.62 x 39mm API

7.62 x 39mm Blank

7.62 x 54R Ball

7.62 x 54R Tracer

7.62 x 54R API

7.62 x 54R Blank

7.62 x 54R Sniper Match (Dragunov) 9mm x 18 Ball

12.7 x 108mm Ball

12.7 x 108mm Tracer

12.7 x 108mm API

12.7 x 108mm API-T

14.5 x 115mm API

14.5 x 115mm API-T

14.5 x 114mm HEI

14.5 x 114mm HEI Tracer 23mm x 152B (HEI)

23mm x 152B (HEI-T) 23mm x 152B (API)

23mm x 152B (API-T) 37mm x 252 SR (FRAG-T)

57mm x 348 (HE) 40mm Rocket Propelled Grenade 73mm Rocket Propelled Grenade

Mortar

60mm (Multiple Variants) 82mm (Multiple Variants)

120mm (Multiple Variants)

Accessories

Links 7.62 x 54R Links 12.7 x 108mm

Links 14.5mm 7.62mm Linking Machine 12.7mm Linking Machine 14.5mm Linking Machine

4.5.1. For each type of ammunition supplied to the USG, the contractor shall provide the following information:

4.5.1.1. Country of origin

4.5.1.2. Manufacturer

4.5.1.3. Lot Numbers (CDRL A002)

4.5.1.4. Date of Manufacture

4.5.1.5. Condition of ammunition (as defined above under basic terminology)

4.5.1.6. Manufacturer’s Lot acceptance test data (if new production) (CDRL A003)

4.5.1.7. Subcontractor(s), sources of supply

5. TESTING, STORAGE AND INSPECTION

5.1. Weapons and accessories.

5.1.1. The government reserves the right to randomly sample up to 100% of all materials for safety, functionality, and workmanship. The data gathered through this testing shall be compared to the manufacturer’s lot acceptance or historical program data to verify the safety of the weapons purchased. The contractor shall provide the certificate of conformance from each manufacturer for each weapons delivery

(CDRL A003):

5.1.1.1. All weapons procured shall safely function with the cartridges specifically designed to be chambered by that weapon. “Safely function” shall be defined as the ability to chamber, fire, and extract a cartridge without causing damage to the cartridge, weapon, or operator.

5.1.1.2. All weapons procured shall be free of cracks and voids.

5.1.1.3. Foreign matter - The weapon shall be free of corrosion, stains, discoloration, dirt, and oil.

5.1.1.4. Workmanship - The requirements for workmanship are as specified on the applicable drawings, referenced specifications, and the following:

5.1.1.5. Metal defects - The weapon shall be free of folds, wrinkles, deep draw scratches, scaly metal, dents, and other defects that might cause the weapon to be inoperable.

5.2. Ammunition.

5.2.1. Ammunition must have been packaged utilizing United Nations (UN) equivalent inner/outer packaging and stored in a facility that protects it from the elements to prevent degradation of the packaging or the ammunition.

5.2.2. The ammunition shall not show any signs of damage to inner and outer package, tampering, or signs of corrosion on the ammunition.

5.2.3. Documentation or markings shall be provided exhibiting that surveillance inspections of the packaging and assets have been performed on a periodic basis to ensure integrity of the packing & ammunition.

5.2.4. All ammunition packaging shall be compliant with current International Standards for

Phytosanitary Measures #15

5.2.5. Prior to the acceptance of ammunition, an inspection will be conducted to determine serviceability. The USG may also conduct a thorough inspection on a percentage (established at the time of RFQ on individual orders) of each lot number/date per manufacturer and will include, but not be limited to the following:

5.2.5.1. Box damaged or show signs of having been waterlogged, weathered, or tampering.

5.2.5.2. Breaks/holes/punctures in the protective plastic bags over the rounds (if condensation is present inside bag there is damage).

5.2.5.3. Rust or corrosion anywhere on the rounds, ejection carts, etc.

5.2.5.4. Coupler areas with debris/corrosion that prevents mating of components.

5.2.5.5. Propellant is not contained or is sticking out/leaking.

5.2.5.6. Protective covers are not in place, punctured, or missing.

5.2.5.7. Primers present with physical damage.

5.2.5.8. Cartridge case damaged/perforated.

5.2.5.9. Loose, inverted, or incorrect projectile.

5.2.5.10. Packaging marked incorrectly/incompletely.

6. PACKAGING

6.1. The contractor shall utilize commercial packing/packaging in accordance with all country specific, International, and U.S. Federal, State, and Local Regulations.

6.2. The load shall be contained in a manner that will permit safe handling and which meets shipper standards for shipment and USG standards for storage.

6.3. Metal banding shall be used to secure load. Straps shall be applied to each column or layer of boxes. Tie down straps shall be applied to each column of boxes at 90 degrees to the load straps. Edge protectors shall be used when securing fiberboard boxes.

6.3.1. All CONUS (within Continental United States) and OCONUS (Outside of Continental United States) shipment of weapons unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be accompanied by a packing list in accordance with CDRL A001 to include:

6.3.1.1. Contractor’s Name

6.3.1.2. CONOP Number

6.3.1.3. Contract and Order Number

6.3.1.4. Weight

6.3.1.5. List of all Serial Numbers

6.3.2. All CONUS and OCONUS ammunition unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be accompanied by a packing list in accordance with CDRL A002 to include:

6.3.2.1. HAZMAT classification code

6.3.2.2. UN Number

6.3.2.3. Net Explosive Weight

6.3.2.4. Weight

6.3.2.5. CONOP Number and Order Number

7. DELIVERY

7.1. Shipping address will be stated within each individual RFP as well as the DO that follows.

7.1.1. Inspection and Acceptance will be stated in each DO and can occur at either Origin or Final Destination.

7.1.2. For OCONUS to OCONUS shipments, contractor may be required to provide consolidated storage near a commercial airport or on or near a military installation for

USG pick up.

8. CONTRACT DELIVERABLES

8.1. Procured Materiel

8.1.1. The contractor shall complete a DD 250 along with a completed Item Information and

Certification Statement (Attachment 2) for each delivery within the Procurement Integrated Enterprise Environment (PIEE).

8.1.2. The contractor shall provide the Government with the appropriate labeling documentation and packing (inventory) lists specified in Section 5 for items procured under this Performance Specification. (CDRL A001, A002)

8.1.3. In order for the USG to complete the End User Certificate (EUC), the contractor shall provide the necessary information within three (3) working days after award, of an applicable order.

8.2. Table 3. List of CDRLs

CDRL # Data Item Description # Description

A001 DI-PACK-81582 Shipping and Labeling

A002 DI-MISC-80043A Ammunition Data Card (Ammunition Lot Numbers)

A003 DI-NDTI-80809B Inspection & Test Report (Certificate of Conformity or Lot Acceptance Data)